Related
Hi
Im currently on this firmware Model: SM-P601
Model name: GALAXY Note 10.1 2014 Edition 3G
Country: United Arab Emirates
Version: Android 4.3
Changelist: 1697646
Build date: Tue, 15 Oct 2013 06:19:06 +0000
Product Code: XSG
PDA: P601XXUBMJB
CSC: P601OJVBMK1
MODEM: P601XXUBMJ8
I want to upgrade to kitkat
Which one is suitable
Trinidad and Tobago 4.4.2 P601UBUCNF1
Cambodia 4.4.2 P601XXUCNF1
And whats the difference between BU and XX
will I have modem or csc problem
Did it
I did it and didn't have any problems
Only csc changed from XSG to ZTO
SupDr said:
I did it and didn't have any problems
Only csc changed from XSG to ZTO
Click to expand...
Click to collapse
now you will receive next OTAs of ZTO or XSG as before (i know there is no "before" )?
zto
SherifMedhat said:
now you will receive next OTAs of ZTO or XSG as before (i know there is no "before" )?
Click to expand...
Click to collapse
ZTO
But no problem
Until it is released for xsg (which may take up to 2 months)
I can then flash the xsg version
Truely kitkat worth it, there is a noticable improvement in performance and everything is better, even charging became fast
Hello everyone, I just got my G960F/DS and it originally came with SIN CSC so being I am in Canada, I tried to load the UK firmware to try and get VoLTE and WiFi calling to work. I was able to on SIN CSC, to select BTU firmware from the phone app using the secret code, but stupid me didn't discover the one thread about to use XEU to get the WiFi calling option and now I am stuck on BTU CSC without the option to go to XEU. I read if you use ODIN to go on H3G and then use ODIN back to a OXM based ROM, that it will go by default to XEU, but for me it just kept the BTU CSC after the firmware was flashed.
Does anyone have any suggestions? As mentioned above, no secret codes on the phone app I read to access the CSC changer or the advanced phone info is currently working. I can't flash a custom ROM as I am on the 7 days wait so wondering if it would be best to wait the 7 days and just flash a custom TW ROM with the CSC I want?
Thanks.
You can't switch between XEU and BTU easily, if at all as they are MultiCSC and one contains the other, BTU contains XEU
Not sure why your phone would default to BTU if you were flashing XEU from a completely different CSC not included though unless your phone was originally BTU
Make sure you're using CSC and not HOME_CSC when you flash and remove the SIM for the flash
Flash back to SIN then to XEU using CSC in ODIN both times
*Detection* said:
You can't switch between XEU and BTU easily, if at all as they are MultiCSC and one contains the other, BTU contains XEU
Not sure why your phone would default to BTU if you were flashing XEU from a completely different CSC not included though unless your phone was originally BTU
Make sure you're using CSC and not HOME_CSC when you flash and remove the SIM for the flash
Flash back to SIN then to XEU using CSC in ODIN both times
Click to expand...
Click to collapse
Yeah the phone originally showed SIN as the product code for Singapore. When I got the phone, I did originally try flashing the G960FXXU1BRF8 BTU ROM with the CSC (not HOME_CSC) with ODIN, but after setting up the phone, the CSC stayed at SIN. The only way I was able to set it to BTU was using the phone secret code of '*#272*IMEI#*' which now being on BTU, that no longer works to switch to XEU. Is there any special steps I should be following to switch CSC's properly? I did the following so far to try and switch
- Flashed H3G BL, AP, CP, CSC using ODIN (kept default ODIN options with SIM card and SD Card removed)
- Let the ROM boot up and went back to Download mode to flash the OXM BL, AP, CP, CSC
- After the firmware was flashed in ODIN, booted into recovery mode to factory reset/wipe cache.
- Inserted SIM Card and SD Card and let the ROM boot which indicated BTU as active CSC and Product Code.
Hope these details help. Do you know if the SIN firmware is a non-OXM or is it part of the OXM-multi CSC?
Andrw0830 said:
Yeah the phone originally showed SIN as the product code for Singapore. When I got the phone, I did originally try flashing the G960FXXU1BRF8 BTU ROM with the CSC (not HOME_CSC) with ODIN, but after setting up the phone, the CSC stayed at SIN. The only way I was able to set it to BTU was using the phone secret code of '*#272*IMEI#*' which now being on BTU, that no longer works to switch to XEU. Is there any special steps I should be following to switch CSC's properly? I did the following so far to try and switch
- Flashed H3G BL, AP, CP, CSC using ODIN (kept default ODIN options with SIM card and SD Card removed)
- Let the ROM boot up and went back to Download mode to flash the OXM BL, AP, CP, CSC
- After the firmware was flashed in ODIN, booted into recovery mode to factory reset/wipe cache.
- Inserted SIM Card and SD Card and let the ROM boot which indicated BTU as active CSC and Product Code.
Hope these details help. Do you know if the SIN firmware is a non-OXM or is it part of the OXM-multi CSC?
Click to expand...
Click to collapse
You can check which CSCs are included in the one you are currently running using this app
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
OXM-multi CSC includes SIN so yea that'll be why it didn't change
OXM-multi CSC includes
ACR AFG AFR ARO ATO AUT BGL BNG BRI BTC BTU CAC CAM CHO COO DBT DKR ECT EGY EON ETL EUR GLB ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MYM NEE NPL ORX PAK PHE PHN ROM SEB SEE SEK SER SIN SKZ SLK SMA STH THL THR TMC TPA TPH TTT TUN TUR WTL XEF XEH XEO XEU XFE XME XSG XSP XTC XXV ZTO
You'd have to flash to one not included first
(But make sure the bootloader version matches and is not higher than the one you want to flash back to or you'll be stuck)
Download mode > BL:x (x = version number)
Firmware BL version is here (G960FXXU1BRF8) << Version 1
*Detection* said:
You can check which CSCs are included in the one you are currently running using this app
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
OXM-multi CSC includes SIN so yea that'll be why it didn't change
OXM-multi CSC includes
ACR AFG AFR ARO ATO AUT BGL BNG BRI BTC BTU CAC CAM CHO COO DBT DKR ECT EGY EON ETL EUR GLB ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MYM NEE NPL ORX PAK PHE PHN ROM SEB SEE SEK SER SIN SKZ SLK SMA STH THL THR TMC TPA TPH TTT TUN TUR WTL XEF XEH XEO XEU XFE XME XSG XSP XTC XXV ZTO
You'd have to flash to one not included first
(But make sure the bootloader version matches and is not higher than the one you want to flash back to or you'll be stuck)
Download mode > BL:x (x = version number)
Firmware BL version is here (G960FXXU1BRF8) << Version 1
Click to expand...
Click to collapse
Thanks for providing this. Do you know why when I flashed the H3G firmware which is a non-OXM CSC, why flashing to a OXM after, caused the Sales and Product Code to stay BTU? As described in my last post, I flashed the BL, AP, CP and CSC for H3G and it did boot, but I immediately shut off the phone and installed the OXM firmware after it did. Does my SIM Card have to be inserted during your steps? Lastly not sure if it's true but I read that whatever your product code is, the OXM CSC will apply that CSC during the first boot. So I have to find a way to change the Product Code without using the phone secret code since that no longer works on BTU firmware.
I usually do my research before doing anything like this to prevent issues and have installed custom ROMs, changed CSC since the S2 days, but this has me stumped.
Andrw0830 said:
Thanks for providing this. Do you know why when I flashed the H3G firmware which is a non-OXM CSC, why flashing to a OXM after, caused the Sales and Product Code to stay BTU? As described in my last post, I flashed the BL, AP, CP and CSC for H3G and it did boot, but I immediately shut off the phone and installed the OXM firmware after it did. Does my SIM Card have to be inserted during your steps? Lastly not sure if it's true but I read that whatever your product code is, the OXM CSC will apply that CSC during the first boot. So I have to find a way to change the Product Code without using the phone secret code since that no longer works on BTU firmware.
I usually do my research before doing anything like this to prevent issues and have installed custom ROMs, changed CSC since the S2 days, but this has me stumped.
Click to expand...
Click to collapse
If I had to guess, (if your phone is 2nd hand) then the original CSC was actually BTU and not SIN, SIN was flashed before it was sold
If that's not the case, then I'd guess that BTU always defaults from OXA Multi unless your CSC is included, which would mean you do not know your original CSC and SIN was still flashed before sale
Otherwise I have no idea, I haven't tried changing my CSC on the S9, I know with the S7 I had before this, the same problem occurred trying to switch between XEU and BTU, my S7 was XEU and refused to switch to BTU
SIM only needs to be removed for the initial flash and first boot from what I know, otherwise it can use the SIM to work out the original CSC
*Detection* said:
If I had to guess, (if your phone is 2nd hand) then the original CSC was actually BTU and not SIN, SIN was flashed before it was sold
If that's not the case, then I'd guess that BTU always defaults from OXA Multi unless your CSC is included, which would mean you do not know your original CSC and SIN was still flashed before sale
Otherwise I have no idea, I haven't tried changing my CSC on the S9, I know with the S7 I had before this, the same problem occurred trying to switch between XEU and BTU, my S7 was XEU and refused to switch to BTU
SIM only needs to be removed for the initial flash and first boot from what I know, otherwise it can use the SIM to work out the original CSC
Click to expand...
Click to collapse
Yeah I kind of figured. Phone was brand new and the Samsung seal wasn't broken but when I did boot it up for the first time, I didn't get the setup screen. I know with my S5 my product code was switched and even when flashing Canada's CSC, with my SIM installed, it would default to a different CSC then what I needed. The only way to change it was using the Phone's Secret code. It's a shame that it's not easier to change the product code so that the proper CSC is applied.
Does anyone who has the BTU product code have the same issue with the secret code not working? I am on the same version of ROM that I was on before my CSC got changed to BTU so I know it's not the ROM version. Every guide I found regarding flashing CSC has been to get to BTU not to get to XEU so anyone who can shed light on this? In the meantime, I will wait the 7 days for OEM Unlock to appear.
So I got the OEM unlock last night after 154 hours uptime but it was 7 days since signed into Samsung account and I did try XEU and INS CSC but no voLTE. Was wondering if anyone on Rogers or any of the Canadian carriers have gotten voLTE or wifi calling to work? In the past I know INS CSC did have voLTE for the s7 when it was a S8 port but so far trying INS, SIN, BTU, or XEU CSC hasn't worked. I am happy with RR AOSP right now, but wanted any suggestions as there must be one CSC that works.
Andrw0830 said:
So I got the OEM unlock last night after 154 hours uptime but it was 7 days since signed into Samsung account and I did try XEU and INS CSC but no voLTE. Was wondering if anyone on Rogers or any of the Canadian carriers have gotten voLTE or wifi calling to work? In the past I know INS CSC did have voLTE for the s7 when it was a S8 port but so far trying INS, SIN, BTU, or XEU CSC hasn't worked. I am happy with RR AOSP right now, but wanted any suggestions as there must be one CSC that works.
Click to expand...
Click to collapse
Hi Andrw0830,
Can you please advise how you did manage to change the CSC back as required to XEU? I also by mistake changed my CSC from STH to BTU via secret code and now the secret code is not working and I am stuck with BTU CSC. Does the OEM unlock has to do anything with it ? Appreciate your feedback ? Thanks
ksantoshh said:
Hi Andrw0830,
Can you please advise how you did manage to change the CSC back as required to XEU? I also by mistake changed my CSC from STH to BTU via secret code and now the secret code is not working and I am stuck with BTU CSC. Does the OEM unlock has to do anything with it ? Appreciate your feedback ? Thanks
Click to expand...
Click to collapse
I waited the 7 days to enable OEM unlock. Then I installed TWRP and installed the devbase ROM which has the choice to change the CSC. You do have to copy the options.prop that's included in the ROMs zip to your SD card before flashing the ROM. Then open up the file and there is a line for CSC, change it from KCSC to XEU. Save the file and install the ROM which will install the CSC you chose and the first boot will have it enabled.
Andrw0830 said:
I waited the 7 days to enable OEM unlock. Then I installed TWRP and installed the devbase ROM which has the choice to change the CSC. You do have to copy the options.prop that's included in the ROMs zip to your SD card before flashing the ROM. Then open up the file and there is a line for CSC, change it from KCSC to XEU. Save the file and install the ROM which will install the CSC you chose and the first boot will have it enabled.
Click to expand...
Click to collapse
Thanks a lot for your quick response and guidance. I was looking at options where I do not have to necessarily flash a custom ROM and somehow change the CSC. Nonetheless, can you please advise further if the KNOX count/warranty is void after you performed this flashing and is there a way to reset these counters ? Thanks again.
ksantoshh said:
Thanks a lot for your quick response and guidance. I was looking at options where I do not have to necessarily flash a custom ROM and somehow change the CSC. Nonetheless, can you please advise further if the KNOX count/warranty is void after you performed this flashing and is there a way to reset these counters ? Thanks again.
Click to expand...
Click to collapse
Unfortunately, once you flash a custom recovery, the KNOX is tripped and there is no way to reset.
ok thanks for your feedback. I will go and check with Samsung Service center
pretty much what the title says do you guys think the galaxy watch from 2018 will ever get tizen os 5.5
Yep
Big update brings Samsung Galaxy Watch 3 features to older Tizen smartwatches
Samsung's first-gen Galaxy Watch and Galaxy Watch Active are receiving new performance and feature upgrades.
www.pocket-lint.com
Samsung just released it !!! Currently fo the US and Korean version only. Maybe they are doing a staged rollout to find if there are issues before releasing world wide.
I'd like to know where it it at then ,LOL
I haven't received mine yet in the US
When did they release it ?
Thank you
bigcid10 said:
I'd like to know where it it at then ,LOL
I haven't received mine yet in the US
When did they release it ?
Thank you
Click to expand...
Click to collapse
A week or two ago....in the US!
check the CSC code of yours if you haven't received it yet. I'm in the UK on XAR and have it
drew071 said:
A week or two ago....in the US!
check the CSC code of yours if you haven't received it yet. I'm in the UK on XAR and have it
Click to expand...
Click to collapse
How do I check the CSC code ?
Mine is 100% stock from ATT ,I'm sure it's USA anyway
Thank you
Believe it when I see it!.
Does that mean we can sideload ECG / BP, or do we not have the hardware?
azif said:
Does that mean we can sideload ECG / BP, or do we not have the hardware?
Click to expand...
Click to collapse
BP should work since it only requires an ordinary heart rate sensor, but not ECG.
Germany is still on DSL1 firmware update.
LaMpiR said:
Germany is still on DSL1 firmware update.
Click to expand...
Click to collapse
Your not alone, still nothing in usa...
The update R800XXU1FUB6/R810XXU1FUB6 (Tizen 5.5.0.1) is currently available for the following regions:
2021-02-25: XAR.
2021-03-12: ACR, AFR, ARO, BVO, CHC, CHO, COO, ECT, EGY, ILO, KOO, KSA, MID, MWD, MXO, PAK, PEO, TGY, TPA, TTT, TUN, TUR, UPO, UYO, XAC, XFA, XSG, ZTO.
2021-03-19: ATO, AUT, BGL, BRI, BTU, CAC, CAM, DBT, EUR, INU, ITV, LUX, MYM, NPL, PHE, PHN, ROM, SEB, SEE, SEK, SER, SKZ, THO, TPH, XEF, XEH, XEO, XEZ, XJP, XME, XNZ, XSA, XSE, XSK, XSP, XTC, XXV.
LaMpiR said:
Germany is still on DSL1 firmware update.
Click to expand...
Click to collapse
I bought also mine in Germany too, and still on the DSL1 version....
(Just changed the CSC to get Samsung pay in France)
Edit:
DBT and XEF are still in version DSL1 : https://doc.samsungmobile.com/SM-R800/DBT/doc.html
But XAR has de latest one https://doc.samsungmobile.com/SM-R800/XAR/doc.html
As I know, all firmware are multi CSC, no one know where we can downoad the latest firmaware version and flash the watch using netodin ?
Edit2:
Just find this topic here, on XDA !
For those who want to have the latest version (but with change of CSC, not compatible with Samsung Pay)
Just got update on watch r805f in Australia to tizen 5.5.01......
The update R800XXU1FUB6/R810XXU1FUB6 is now available for all regions.
I have a SM-R825F LTE Active 2, with XEF CSC. I am donwloading BTI9 firmware now, which is 291,69 Mo.
Me too , CSC OXA
dimkit said:
Me too , CSC OXA
Click to expand...
Click to collapse
Where is SP02 mesasurement ?
It does not have ,it is not supported for my CSC OXA
Hi! I have a question
Can I change csc Note 8 Hongkong TGY to XXV?
Thank you!