Related
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
No, bootloaders are different, with the S7 there was an unbranded U firmware that was compatible with most of them, unlocked firmware will be that one for the S9, but no you cannot just flash different device firmwares to the wrong model
I was able to flash the ATT rom onto my Verizon S9. I got a VZ s9 from work but I'm on ATT. For the most part it's worked great, I had done the same thing previously with a Galaxy S7. I say for the most part b/c I am on here tonight to post a question myself about the fact that I'm getting a delay with MMS messages. I imagine it has something to do with the APNs I have setup, but I can't seem to figure it out.
toronado13 said:
I was able to flash the ATT rom onto my Verizon S9. I got a VZ s9 from work but I'm on ATT. For the most part it's worked great, I had done the same thing previously with a Galaxy S7. I say for the most part b/c I am on here tonight to post a question myself about the fact that I'm getting a delay with MMS messages. I imagine it has something to do with the APNs I have setup, but I can't seem to figure it out.
Click to expand...
Click to collapse
Did you have to flash to the U1 software first?
I do think that is what I ended up doing... tried to go directly first and it kept failing. Got fed up and decided to just try and put the bone stock rom on it, and that went on really easily.... so after using it like that a few days I tried to drop the ATT rom on it and it worked without issue.
SEALBoy said:
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
Click to expand...
Click to collapse
Yes, but you need to go to the u1 firmware 1st then to the other carrier firmware. Also make sure you avoid the newer firmwares with the new bootloader, as the unlocked model and certain carrier models don't have the new bootloader.
*Detection* said:
No, bootloaders are different, with the S7 there was an unbranded U firmware that was compatible with most of them, unlocked firmware will be that one for the S9, but no you cannot just flash different device firmwares to the wrong model
Click to expand...
Click to collapse
lolol
yes u can.. u can flash between U and U1 firmwares no problem..
normally ud b correct tho but since s8/s8+ it has been ok.. just cant flash 9600 or 9650 to a U or U1 device
elliwigy said:
lolol
yes u can.. u can flash between U and U1 firmwares no problem..
normally ud b correct tho but since s8/s8+ it has been ok.. just cant flash 9600 or 9650 to a U or U1 device
Click to expand...
Click to collapse
That'll be why I still thought that then, coming straight from the S7 > S9
Had many members flashing the wrong firmwares thinking they could do that and bricking their S7s / wondering why ODIN failed
*Detection* said:
That'll be why I still thought that then, coming straight from the S7 > S9
Had many members flashing the wrong firmwares thinking they could do that and bricking their S7s / wondering why ODIN failed
Click to expand...
Click to collapse
I tried downloading vzw firmware G960USQS3ARI6 to my unlocked sprint s9 and still not vzw flashed. want to do this so can have voice over LTE. Any other steps im missing? flash went through but still sprint
As soon as Firmware ver. 3 came out for the G960U1, I was able to flash it to my Sprint G960U and finally have VoLTE, WiFi calling and stable LTE for MetroPCS. Used samkey to unlock it from Sprint. My phone is actually performing much faster without all of Sprint's bloatware hogging my RAM and storage space. I can confirm that OTA updates still work the same...I received September's security patch (current) with no problems. Device is still official status and Knox hasn't been tripped.
A lot of people think you can just flash the carrier firmware of your choice and boom, it works...I had the same thought process....that's not the case. You have to make sure that there is a matching firmware version for the carrier you want to flash to, as well as make sure the G960U1 firmware version (the unlocked version of the S9's software you have to flash first before even carrier flashing) is the same version of what is installed on your phone now. It's easy ya'll......just READ lol.
I'm in love with my phone again thanks to XDA. ?
HAPPY FLASHING!
nickosarus2008 said:
As soon as Firmware ver. 3 came out for the G960U1, I was able to flash it to my Sprint G960U and finally have VoLTE, WiFi calling and stable LTE for MetroPCS. Used samkey to unlock it from Sprint. My phone is actually performing much faster without all of Sprint's bloatware hogging my RAM and storage space. I can confirm that OTA updates still work the same...I received September's security patch (current) with no problems. Device is still official status and Knox hasn't been tripped.
A lot of people think you can just flash the carrier firmware of your choice and boom, it works...I had the same thought process....that's not the case. You have to make sure that there is a matching firmware version for the carrier you want to flash to, as well as make sure the G960U1 firmware version (the unlocked version of the S9's software you have to flash first before even carrier flashing) is the same version of what is installed on your phone now. It's easy ya'll......just READ lol.
I'm in love with my phone again thanks to XDA.
HAPPY FLASHING!
Click to expand...
Click to collapse
Hi, I got one unlocked G960U1(G960U1UES3ARI1) and downloaded new fireware(G960U1UES3ARI1-SPR) from sammobile, but after flashed SPR ROM successfully, the info on the phone still shows XAA, anything I missed here? Thanks!
Curtis2018 said:
Hi, I got one unlocked G960U1(G960U1UES3ARI1) and downloaded new fireware(G960U1UES3ARI1-SPR) from sammobile, but after flashed SPR ROM successfully, the info on the phone still shows XAA, anything I missed here? Thanks!
Click to expand...
Click to collapse
Well first off, you have the unlocked phone. I don't. My G960U is originally from Sprint, so I'm not sure about carrier flashing regarding the G960U1. I thought it was supposed to provision itself after you put the sim in, and the associated carrier apps will download since it's the unlocked model...but I may be wrong...
SEALBoy said:
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
Click to expand...
Click to collapse
I know so many people have already answered your question from some saying No to others saying Yes but you need to Install U1 first and Bla Bla Bla.
I want to give you one specific answer: With S9 you can any Carriers firmware you wish or even Unlocked phone's firmware. You will never have any issue. And you don't ever need to flash U1 or something else before changing carrier firmware you can Flash from ATT S9 firmware to VZW S9 firmware without any issue. You can also flash from U to U1 which is from Carrier specific to Unbranded/Unlocked but only hiccup is original Odin will give you SHA-256 error, which is normal because you are flashing U1 firm to U device or vice versa. This error can easily be resolved by used Patched odin that disabled SHA-256 check. And trust me you will never have any issue.
You will never want to do this but I have gone as far as mix-matching U and U1 firmware together as well. Like flashing AP, BL and CP of U device but flashing CSC of U1 device. and it still works.
hey there, a little late to the party, having trouble with going from a Verizon to a Sprint, even by way of U1. I can't get any of them to work. And I've been told I have to go from VZW to U1 before I went to Sprint. Is that not the case? I'm having a hell of a time getting anything to flash, everything fails.
---------- Post added at 03:08 AM ---------- Previous post was at 02:57 AM ----------
ret4425 said:
hey there, a little late to the party, having trouble with going from a Verizon to a Sprint, even by way of U1. I can't get any of them to work. And I've been told I have to go from VZW to U1 before I went to Sprint. Is that not the case? I'm having a hell of a time getting anything to flash, everything fails.
Click to expand...
Click to collapse
well, I tried to load the Sprint image from the VZW, no dice. It said it passed, but upon reboot loaded up the old Big Red (even with the Sprint SIM in it).
Anyone have any ideas? This is driving me insane....
cant find a lg710PM firmware kdz for cross flashing with sprint, can anyone link?
I bought from amazon a refurbished USA unlocked (ULM) LG G7 thinq that I cant seem to register on the sprint network.
wanted to try the lg710PM firmware but cant find it anywhere, any links or advice? thanks!!!
zultdush said:
cant find a lg710PM firmware kdz for cross flashing with sprint, can anyone link?
I bought from amazon a refurbished USA unlocked (ULM) LG G7 thinq that I cant seem to register on the sprint network.
wanted to try the lg710PM firmware but cant find it anywhere, any links or advice? thanks!!!
Click to expand...
Click to collapse
None exist as of yet.. Not Supported: LG devices from ATT, Cricket, Sprint, BoostMobile, VirginMobile, AIO and Tracfone. TM Verizon are the only ones.. This came from https://lg-firmware-rom.com/.
doubledragon5 said:
None exist as of yet.. Not Supported: LG devices from ATT, Cricket, Sprint, BoostMobile, VirginMobile, AIO and Tracfone. TM Verizon are the only ones.. This came from44.
Click to expand...
Click to collapse
hey thanks for replying so quick, so if I was on sprint firmware, and wanted to try any of the others, does that mean I can only go one direction? like once I'm off sprint I cant go back, or are there ways I can get back to my original sprint firmware?
zultdush said:
hey thanks for replying so quick, so if I was on sprint firmware, and wanted to try any of the others, does that mean I can only go one direction? like once I'm off sprint I cant go back, or are there ways I can get back to my original sprint firmware?
Click to expand...
Click to collapse
You can with a unlocked bootloader. But to go back to Sprint you need the official firmeware which they do not provide to the public.... I have a G7 had it unlocked, different firmware installed. Had no service, . Tried to flash another firmware and ended up wiith a hard brick.. Got it back to the first unofficial sprint firmware, then had to have Sprint reflash the official firmware for the phone.. What's nice the bootloader is still unlocked.. Right now I would not even try anything. Best bet is to return if able, and buy a already unlocked version, so long as you can use it with sprint.
doubledragon5 said:
You can with a unlocked bootloader. But to go back to Sprint you need the official firmeware which they do not provide to the public.... I have a G7 had it unlocked, different firmware installed. Had no service, . Tried to flash another firmware and ended up wiith a hard brick.. Got it back to the first unofficial sprint firmware, then had to have Sprint reflash the official firmware for the phone.. What's nice the bootloader is still unlocked.. Right now I would not even try anything. Best bet is to return if able, and buy a already unlocked version, so long as you can use it with sprint.
Click to expand...
Click to collapse
I have a Sprint G7 (G710PM), can I flash any other carrier kdz to use the phone on T-Mobile?
caquito07 said:
I have a Sprint G7 (G710PM), can I flash any other carrier kdz to use the phone on T-Mobile?
Click to expand...
Click to collapse
Not with a locked bootloader
doubledragon5 said:
Not with a locked bootloader
Click to expand...
Click to collapse
Man I just bricked the phone, first I tried flashing G710EM using LGUP and Partition DL (Select All) it failed almost immediately, after rebooting the phone it booted straight to Firmware Upgrade mode. Then, I got G710N20f, also tried to flash it using Partition DL (Select all), this time it failed at more than 70% step BackupGPT, now when I reboot the phone, I get the LG logo but after the screen turns to whitenoise like, it seems like it is still in Firmware Upgrade as I can still connect to it using LGUP.
Any ideas how to unbrick it? :crying:
caquito07 said:
Man I just bricked the phone, first I tried flashing G710EM using LGUP and Partition DL (Select All) it failed almost immediately, after rebooting the phone it booted straight to Firmware Upgrade mode. Then, I got G710N20f, also tried to flash it using Partition DL (Select all), this time it failed at more than 70% step BackupGPT, now when I reboot the phone, I get the LG logo but after the screen turns to whitenoise like, it seems like it is still in Firmware Upgrade as I can still connect to it using LGUP.
Any ideas how to unbrick it? :crying:
Click to expand...
Click to collapse
If you have Sprit take it there they will havel flash the correct firmware..
doubledragon5 said:
If you have Sprit take it there they will havel flash the correct firmware..
Click to expand...
Click to collapse
I dont, I am T-Mobile user.
I have dump from a similar working phone, is it possible to restore from the dump?
caquito07 said:
I dont, I am T-Mobile user.
I have dump from a similar working phone, is it possible to restore from the dump?
Click to expand...
Click to collapse
Should be, that's how Sprint tooke care of mine
doubledragon5 said:
Should be, that's how Sprint tooke care of mine
Click to expand...
Click to collapse
Do you know how I can create a TOT or KDZ or which ever the case to recover the phone from the dump files?
doubledragon5 said:
Should be, that's how Sprint tooke care of mine
Click to expand...
Click to collapse
Hi, i just did a remote unlock via ebay to an unlocked firmware. I want to revert the changes back so that I could use a sprint mvno. Is it possible?
caquito07 said:
Do you know how I can create a TOT or KDZ or which ever the case to recover the phone from the dump files?
Click to expand...
Click to collapse
I have no clue on how to do that.. You will have to do a search in google or inthe forms.
---------- Post added at 02:18 AM ---------- Previous post was at 02:15 AM ----------
Truffle1991 said:
Hi, i just did a remote unlock via ebay to an unlocked firmware. I want to revert the changes back so that I could use a sprint mvno. Is it possible?
Click to expand...
Click to collapse
Are you sure it is firmware (bootloader unlcok)? or sim unlock, there is a difference.. If you did a bootloader unlock you will get a waring saying. "Warning your software can not be check or is corrupt, please relock the bootloader". If you don't have this kind of message of this sort, then you just had it sim unlocked.
doubledragon5 said:
I have no clue on how to do that.. You will have to do a search in google or inthe forms.
---------- Post added at 02:18 AM ---------- Previous post was at 02:15 AM ----------
Are you sure it is firmware (bootloader unlcok)? or sim unlock, there is a difference.. If you did a bootloader unlock you will get a waring saying. "Warning your software can not be check or is corrupt, please relock the bootloader". If you don't have this kind of message of this sort, then you just had it sim unlocked.
Click to expand...
Click to collapse
im just going by the ebay listing. It states"Your phone will be converted to a unlocked firmware version and that i can no longer receive ota updates".
My software version is G710ULM11e and my build number is OPR1.170623.032 and im on security patch level july 1, 2018 and android 8.0. When i go to the update center to check for a software update it states im using the latest version for my phone.
I did try a prl update and update device config and it states profile cant be updated. SprintDM notification shows that it trying update mobile network. it comes on and off every 3 mins or so.
I hope this is enough information to go off of! If you need me more information , please tell.
Also I did contact sprint via chat and they stated i could get my firmware back to stock but its 2 about 2 hours away from my city . itll be a like a whole day trip for me since i don't drive and would have to take a bus. I would love to avoid that.
Thanks!
Truffle1991 said:
im just going by the ebay listing. It states"Your phone will be converted to a unlocked firmware version and that i can no longer receive ota updates".
My software version is G710ULM11e and my build number is OPR1.170623.032 and im on security patch level july 1, 2018 and android 8.0. When i go to the update center to check for a software update it states im using the latest version for my phone.
I did try a prl update and update device config and it states profile cant be updated. SprintDM notification shows that it trying update mobile network. it comes on and off every 3 mins or so.
I hope this is enough information to go off of! If you need me more information , please tell.
Also I did contact sprint via chat and they stated i could get my firmware back to stock but its 2 about 2 hours away from my city . itll be a like a whole day trip for me since i don't drive and would have to take a bus. I would love to avoid that.
Thanks!
Click to expand...
Click to collapse
that problem with the Sprint DM trying to connect every couple minutes is a huge problem with the bootloaders be unlocked you will have to go to Sprint and have them do it it takes about 30 minutes because right now there is no firmware available for Sprint anywhere on the internet. when I get a break from my new job I am going to try and install TWRP on my device and if I do it successfully I will be able to upload some firmware but that's not guaranteed.
doubledragon5 said:
that problem with the Sprint DM trying to connect every couple minutes is a huge problem with the bootloaders be unlocked you will have to go to Sprint and have them do it it takes about 30 minutes because right now there is no firmware available for Sprint anywhere on the internet. when I get a break from my new job I am going to try and install TWRP on my device and if I do it successfully I will be able to upload some firmware but that's not guaranteed.
Click to expand...
Click to collapse
I went to sprint yesterday and the rep turned me down the moment I answered no whether I had insurance or not for the phone. I'll just port my number to a gsm carrier and use my G7 there.
Truffle1991 said:
I went to sprint yesterday and the rep turned me down the moment I answered no whether I had insurance or not for the phone. I'll just port my number to a gsm carrier and use my G7 there.
Click to expand...
Click to collapse
Whether you had insurance on the phone or not should not have mattered. Sprint should have flashed the firmware, cuz that's their damn job. They asked me the same question I told them no and they still flash the firmware.
Truffle1991 said:
I went to sprint yesterday and the rep turned me down the moment I answered no whether I had insurance or not for the phone. I'll just port my number to a gsm carrier and use my G7 there.
Click to expand...
Click to collapse
You have to be assertive or act completely aloof. If you are a paying Sprint customer, they will reset/reflash your phone. If no one in your immediate area can help you out, maybe you can mail the phone to someone who can get it serviced (heh I'd happily do it for free but hopefully there is someone a bit tech savvy in your own social network).
I got Note 10+ 256gb unlocked version from Samsung. Planning on using it on Tmobile. Do I need to do anything specific to make it more compatible with Tmobile. I've currently unlocked s10e on Tmobile and overall network coverage seems bit subpar compared to Galaxy S8 that I purchased from Tmobile.
So I'm just curious if I need to do anything for Note 10+ ince I get it, to make it more network friendly.
Sent from my SM-G970U1 using Tapatalk
Download the tmobile firmware from sam mobile and odin it to your unlocked.
I googled it but didn't have luck. Any chance there is a link to the T-Mobile firmware?
stu5797 said:
I googled it but didn't have luck. Any chance there is a link to the T-Mobile firmware?
Click to expand...
Click to collapse
It's not up on Sammobile yet...
But it is on samfrew
https://samfrew.com/download/Galaxy__Note10+__256GB__/c3pb/TMB/N975USQU1ASGO/N975UOYN1ASGO/
What about for the 512 version unlocked? Can use same as 256 unlocked?
And is it recommended to flash the firmware (T-Mobile in my case too) right out of the box or do you have to put your old sim in from your previous phone first, then setup your gmail acct and let the sim reach the T-Mobile network?
Never had unlocked phones so this will be a first, hence the questions...
I just flashed my Note 10+ with TMB fimware and it all went fine. here is the link from Sammobile https://www.sammobile.com/samsung/galaxy-note-10-plus/firmware/SM-N975U/
marctronixx said:
What about for the 512 version unlocked? Can use same as 256 unlocked?
And is it recommended to flash the firmware (T-Mobile in my case too) right out of the box or do you have to put your old sim in from your previous phone first, then setup your gmail acct and let the sim reach the T-Mobile network?
Never had unlocked phones so this will be a first, hence the questions...
Click to expand...
Click to collapse
It doesn't really matter. The storage size doesn't affect the firmware. It's all the same.
Flashing the carrier firmware will factory reset your device, so I wouldn't waste time setting it up first. Just put your SIM in and let it provision for T-Mobile. It happens automatically so there's nothing you have to do. Then flash the firmware with ODIN.
Just research and make sure you know what you're doing before flashing. ODIN is fairly fool proof, but it's still best to know what you're doing first.
Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
I thought you can flash without messing with your data.
stu5797 said:
Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
I thought you can flash without messing with your data.
Click to expand...
Click to collapse
Technically you can flash without messing data but will be difficult to identify the reasons if you encounter any issues after that. So its better to flash it now itself when its freshly out of the box
I was going to update the Unlocked firmware via OTA software update. Once I receive the update I will then flash the Tmobile firmware via Odin
marctronixx said:
What about for the 512 version unlocked? Can use same as 256 unlocked?
And is it recommended to flash the firmware (T-Mobile in my case too) right out of the box or do you have to put your old sim in from your previous phone first, then setup your gmail acct and let the sim reach the T-Mobile network?
Never had unlocked phones so this will be a first, hence the questions...
Click to expand...
Click to collapse
Just received my unlocked Note10+ 512GB an hour ago and, as was the case with my unlocked Note9, it works great out of the box with T-Mobile and Mint (a discount reseller). No custom flashes needed unless you want the TMO bloatware. I would leave it as-is and just download the respective carrier apps individually. Love this BEAST so far! :good:
I bought the note 10+ and i'm on the tmobile network. The only issue I'm having is VOLTE. To my knowledge VOLTE should work. Can anyone confirm this?
I flashed att firmware on an unlocked note 10 plus but att still sees it as an unlocked phone. Is it possible to change the phone to completey read as an attvbranded model? I called to see if they could provision the IMEI of my phone and they were able to tell right away it was not one of theirs, even though it was running att firmware.
Nikkic87 said:
I flashed att firmware on an unlocked note 10 plus but att still sees it as an unlocked phone. Is it possible to change the phone to completey read as an attvbranded model? I called to see if they could provision the IMEI of my phone and they were able to tell right away it was not one of theirs, even though it was running att firmware.
Click to expand...
Click to collapse
No, because (as you found out) the IMEI number is not from an AT&T branded phone.
Nikkic87 said:
I flashed att firmware on an unlocked note 10 plus but att still sees it as an unlocked phone. Is it possible to change the phone to completey read as an attvbranded model? I called to see if they could provision the IMEI of my phone and they were able to tell right away it was not one of theirs, even though it was running att firmware.
Click to expand...
Click to collapse
I have a GOOGLE unlocked phone. I flashed N975U firmware on my phone and also flashed ATT USER DATA at the same time.. When my phone booted up - it had all of the ATT BLOAT that comes on an Att phone - it booted up with the ATT LOGO - it shows ATT ICONS in the Status Bar for Data (5GE instead of showing LTE or 4G) and I have Wifi Calling and Video Calling working on my phone...
https://androidfilehost.com/?w=files&flid=301224
That is all it took. I didn't have to call ATT - It all just worked - and it was not working that way BEFORE I flased Userdata.
YMMV but I have heard about others who had the same experience. Go tot he N975U Firmware thread and find the download for ATT USERDATA - That is where I found it....
Hope that helps you.....
Pixel and iPhones are supposedly able to do those things. I think that may be why it worked for you
Geekser said:
I have a GOOGLE unlocked phone. I flashed N975U firmware on my phone and also flashed ATT USER DATA at the same time.. When my phone booted up - it had all of the ATT BLOAT that comes on an Att phone - it booted up with the ATT LOGO - it shows ATT ICONS in the Status Bar for Data (5GE instead of showing LTE or 4G) and I have Wifi Calling and Video Calling working on my phone...
https://androidfilehost.com/?w=files&flid=301224
That is all it took. I didn't have to call ATT - It all just worked - and it was not working that way BEFORE I flased Userdata.
YMMV but I have heard about others who had the same experience. Go tot he N975U Firmware thread and find the download for ATT USERDATA - That is where I found it....
Hope that helps you.....
Click to expand...
Click to collapse
Do you know of any way to get them to recognize the IMEI as one of theirs?
scottusa2008 said:
No, because (as you found out) the IMEI number is not from an AT&T branded phone.
Click to expand...
Click to collapse
Nikkic87 said:
Do you know of any way to get them to recognize the IMEI as one of theirs?
Click to expand...
Click to collapse
Wish it was possible, but unfortunately no way exists.
If you have WiFi Callling, Video Calling and Volte working, why does it matter if ATT recognizes your phone as one of theirs or not? Just curious about what you are trying to accomplish ?
Hi guys I got a Verizon N975U note 10 plus and its stuck on Verizon I'm trying to flash it with U1 so I can pop a sim in and changes it to that carrier. Do I just need to flash it with the U1 file here https://androidfilehost.com/?w=files&flid=297980 or will it need something special the build # is SQS2ASJ8
johntudd said:
Hi guys I got a Verizon N975U note 10 plus and its stuck on Verizon I'm trying to flash it with U1 so I can pop a sim in and changes it to that carrier. Do I just need to flash it with the U1 file here https://androidfilehost.com/?w=files&flid=297980 or will it need something special the build # is SQS2ASJ8
Click to expand...
Click to collapse
Can't say for sure it would work on U firmware (lack of first hand experience to verify) as it would for U1.... As long as the phone is network/sim unlocked then you should be able to just put the new sim card in it (and the phone will read the sim card settings and apply them).
Flashing the U1 firmware instructions on flashing U1 firmware have been at link below (bottom of first post). You can get the firmware from that thread also.
https://forum.xda-developers.com/showpost.php?p=80072192&postcount=1
Of course keep in mind that none of this will matter unless the phone is sim/network unlocked. As long as you meet the requirements from Verizon (or the phone was blacklisted for either non payment, lost/stolen or a warranty/insurance exchange that wasn't sent in) then this shouldn't be an issue.
its locked to Verizon at the moment when I put a sim in it will work for a bit then say its not allowed to use another carriers sim at this time.
johntudd said:
its locked to Verizon at the moment when I put a sim in it will work for a bit then say its not allowed to use another carriers sim at this time.
Click to expand...
Click to collapse
Either wait until the phone is able to be unlocked by Verizon, or call them and request that they unlock it for you. Until that happens you will not be able to use a non-verizon sim card.
I would also advise keeping the U firmware for Verizon installed and not flashing the U1 firmware, as the Verizon sim/network unlock requires the carrier firmware... At least that is what I am gathering from various discussions/threads.
johntudd said:
Hi guys I got a Verizon N975U note 10 plus and its stuck on Verizon I'm trying to flash it with U1 so I can pop a sim in and changes it to that carrier. Do I just need to flash it with the U1 file here https://androidfilehost.com/?w=files&flid=297980 or will it need something special the build # is SQS2ASJ8
Click to expand...
Click to collapse
Is your phone carrier locked to Verizon? Has it been activated on Verizon's service for 30 days? If not, I'm pretty sure firmware flashing won't help anything. I'm on a Verizon MVNO and they wouldn't even unlock it for me to use on their own network. I had to activate with them for 30 days.
However, now that mine is unlocked, it's still locked down to Verizon in a lotof ways. My SIM card for my current carrier can't apply an APN, for example, so I have to do it manually. I'm contemplating flashing U1 to fix that issue (I hope).
I have a very similar situation. I bought a Note 10+ N975U (Verizon Unlocked) and I want to take it to U1 and then maybe to Sprint. I tried to go to the OP here and follow instructions. So I downloaded and selected all the files for U1 and apparently I did the "no-no" and got stopped with the SW Rev Check Fail : abl Fused 2 > Binary 1. I looked at what my phone is on and it is the SJ8 (November?) from Verizon. I'm guessing that means the BL file (bootloader?) in the U1 folder (SGO?) is older than what is on my phone? What do I need to do differently? I already tried without selecting the BL file, but it still gives the same error. Any help is appreciated! Thanks in advance!
baumanbt said:
I have a very similar situation. I bought a Note 10+ N975U (Verizon Unlocked) and I want to take it to U1 and then maybe to Sprint. I tried to go to the OP here and follow instructions. So I downloaded and selected all the files for U1 and apparently I did the "no-no" and got stopped with the SW Rev Check Fail : abl Fused 2 > Binary 1. I looked at what my phone is on and it is the SJ8 (November?) from Verizon. I'm guessing that means the BL file (bootloader?) in the U1 folder (SGO?) is older than what is on my phone? What do I need to do differently? I already tried without selecting the BL file, but it still gives the same error. Any help is appreciated! Thanks in advance!
Click to expand...
Click to collapse
The bootloader of the U1 firmware you were trying to flash is lower then what is currently on your phone. So yes you are correct that is the no-no. Also you can not skip the bootloader file when flashing, so that wouldn't have worked.
If you read through that thread you will have found others asking how to go from U to U1 firmware. Also the error within regards to trying to flash a lower bootloader version firmware was also asked and answered. I would encourage you to browse that thread and the Q&A forum because this process has been discussed on more then one occasion... It might contain helpful/useful info for you.
In short you need to get a newer firmware release. Using samfirm or frija apps, or the sammobile website look for the firmware your seeking. Google searching will show you how to obtain samfirm, frija is posted the forum here if I recall correctly.
For U1 the model is SM-N975U1 and the region is XAA.