Develop Bugs

How to stop OTA updates (on a rooted TWN H815)?

I have a Taiwanese H815 which I have rooted using the injection method. I frequently get a software update notification, but the update always fails because the phone is rooted. In the Software Update screen I have unchecked "Check automatically" and "Auto-install updates", but this doesn't stop me getting a software update notification every day or so.
How can I stop these software update notifications?

http://forum.xda-developers.com/g4/general/disable-ota-t3131493
Here you go mate.

azZA_09 said:
http://forum.xda-developers.com/g4/general/disable-ota-t3131493
Here you go mate.
Click to expand...
Click to collapse
Thanks for that. Unfortunately when I dial that number I don't get a "wifi test" option. The only options are:
- Device Test
- ELT Test
- SVC Menu
- Field Test
???

itm said:
Thanks for that. Unfortunately when I dial that number I don't get a "wifi test" option. The only options are:
- Device Test
- ELT Test
- SVC Menu
- Field Test
???
Click to expand...
Click to collapse
Go to Field Test

azZA_09 said:
Go to Field Test
Click to expand...
Click to collapse
OK I found the OTA option under Field Test, disabled it and......got another OTA update notification a few hours later :0(

itm said:
OK I found the OTA option under Field Test, disabled it and......got another OTA update notification a few hours later :0(
Click to expand...
Click to collapse
Well, why don't you factory reset phone, allow all OTAs and then root and so on. You can root both LL/MM now
---------- Post added at 07:11 PM ---------- Previous post was at 07:10 PM ----------
azZA_09 said:
Well, why don't you factory reset phone, allow all OTAs and then root and so on. You can root both LL/MM now
Click to expand...
Click to collapse
Sry, not factory reset, use LGUP and upgrade option. Search the forum for LGUP or tell me and I'll explain you step by step. Cheers

The factory reset wouldn't remove root, so the OTA would still fail. It's a Taiwan model and I've been told it's not possible to get MM and root on it.

azZA_09 said:
Well, why don't you factory reset phone, allow all OTAs and then root and so on. You can root both LL/MM now
---------- Post added at 07:11 PM ---------- Previous post was at 07:10 PM ----------
Sry, not factory reset, use LGUP and upgrade option. Search the forum for LGUP or tell me and I'll explain you step by step. Cheers
Click to expand...
Click to collapse
I've looked at the LGUP thread and it seems to require installation of TWRP. I don't think this is possible on the Taiwan model as the bootloader can't currently be unlocked. Is that right?

http://forum.xda-developers.com/g4/general/unlock-list-lg-g4-variants-unlocked-t3262621 Check this

azZA_09 said:
http://forum.xda-developers.com/g4/general/unlock-list-lg-g4-variants-unlocked-t3262621 Check this
Click to expand...
Click to collapse
Yes I'd seen that thread - TWN isn't on the list of models that can be unlocked (

Check PM
---------- Post added at 07:33 PM ---------- Previous post was at 07:26 PM ----------
In the last situation, I suggest you backup messages,phone history, photos etc, do a factory reset with LGUP ( it will remove root, trust me, but find your correct .kdz), do all the updates, then root...

azZA_09 said:
Check PM
---------- Post added at 07:33 PM ---------- Previous post was at 07:26 PM ----------
In the last situation, I suggest you backup messages,phone history, photos etc, do a factory reset with LGUP ( it will remove root, trust me, but find your correct .kdz), do all the updates, then root...
Click to expand...
Click to collapse
Thanks. I'm not actually interested in doing the updates (unless I could actually upgrade to MM and root it, which I've been told is impossible for the TWN model). I just want to suppress the daily system update notifications.
Thanks for the link in your PM. I've tried the "Disable Service" app mentioned in the thread, and it indicated that the SystemUpdateService (in Google Services Framework) was already disabled on my phone- maybe because I followed the instructions earlier in this thread? I have no idea why I'm still getting a daily system update notification. It's annoying because I can't just swipe it away like a normal notification - I have to go into the System Update screen, select the update option then abort it (every day!)

itm said:
Thanks. I'm not actually interested in doing the updates (unless I could actually upgrade to MM and root it, which I've been told is impossible for the TWN model). I just want to suppress the daily system update notifications.
Thanks for the link in your PM. I've tried the "Disable Service" app mentioned in the thread, and it indicated that the SystemUpdateService (in Google Services Framework) was already disabled on my phone- maybe because I followed the instructions earlier in this thread? I have no idea why I'm still getting a daily system update notification. It's annoying because I can't just swipe it away like a normal notification - I have to go into the System Update screen, select the update option then abort it (every day!)
Click to expand...
Click to collapse
Maybe you can go to settings-apps-find something like "system update" and deslect show notifications. On Sony/HTC ROMs they have this option.

azZA_09 said:
Go to Field Test
Click to expand...
Click to collapse
azZA_09 said:
Maybe you can go to settings-apps-find something like "system update" and deslect show notifications. On Sony/HTC ROMs they have this option.
Click to expand...
Click to collapse
I didn't really find anything in the apps list, but did a force stop on the "Remote Support Service" app, so I'll see if that makes any difference....

Moto Z Play not upgrading to Nougat. Help.

I received the notification to upgrade to 7.0 this morning and as I was downloading I was notified I did not have enough space. After making space on my phone the notification does no show nor do I get the suggestions in the "System Updates". Whenever I try to update it tells me "Your device's software is up to date." even though it is still running 6.0. What do I do, I've tried a hard reset.

pineapplefun101 said:
I received the notification to upgrade to 7.0 this morning and as I was downloading I was notified I did not have enough space. After making space on my phone the notification does no show nor do I get the suggestions in the "System Updates". Whenever I try to update it tells me "Your device's software is up to date." even though it is still running 6.0. What do I do, I've tried a hard reset.
Click to expand...
Click to collapse
What Model is your phone?

Carrier? Do you have an SD card installed?

ironbesterer said:
Carrier? Do you have an SD card installed?
Click to expand...
Click to collapse
No SD installed and it is an unlocked phone the carrier is Consumer Cellular.

aviwdoowks said:
What Model is your phone?
Click to expand...
Click to collapse
Its a Moto Z Play unlocked, That's all I could really find through the "about phone". (I apologize I'm a noob).

pineapplefun101 said:
No SD installed and it is an unlocked phone the carrier is Consumer Cellular.
Click to expand...
Click to collapse
Post a screen shot of about phone

Settings
About

The device is unlocked, which means it is RETUS. Flashing VZW firmware on it won't let you be able to take updates. The update is controlled through the carrier

ironbesterer said:
The device is unlocked, which means it is RETUS. Flashing VZW firmware on it won't let you be able to take updates. The update is controlled through the carrier
Click to expand...
Click to collapse
Is your screen dirty?
Lol
Who said anything about vzw firmware?

aviwdoowks said:
Is your screen dirty?
Lol
Who said anything about vzw firmware?
Click to expand...
Click to collapse
Uh look at the baseband. ADDISON_VZW_CUST.
Do you need glasses?

ironbesterer said:
Uh look at the baseband. ADDISON_VZW_CUST.
Do you need glasses?
Click to expand...
Click to collapse
Friend, that's my SS.
He 'fest he was a noob so I posted mine as a tutorial

aviwdoowks said:
Friend, that's my SS.
He 'fest he was a noob so I posted mine as a tutorial
Click to expand...
Click to collapse
My mistake. I thought it was posted by the OP. I misread your post.

ironbesterer said:
The device is unlocked, which means it is RETUS. Flashing VZW firmware on it won't let you be able to take updates. The update is controlled through the carrier
Click to expand...
Click to collapse
Does this mean I have to contact my carrier about the update since its controlled through them?
http://i.imgur.com/w0mMKGK.png
Heres the settings

i guess your carrier will be late with updates, they mostly are. At least my old one was.
That is why i bought the phone without a carrier to get updates early and i got it 4 days ago. workes pretty good

pineapplefun101 said:
Does this mean I have to contact my carrier about the update since its controlled through them?
http://i.imgur.com/w0mMKGK.png
Heres the settings
Click to expand...
Click to collapse
See if you can find the .xml.zip original firmware and flash it with RSD lite.
Are you bootloader unlocked?

aviwdoowks said:
See if you can find the .xml.zip original firmware and flash it with RSD lite.
Are you bootloader unlocked?
Click to expand...
Click to collapse
No, I am not bootloader unlocked currently. Currently installing RSD lite and going to see if i can find the xml. Do I need to be bootloader unlocked to flash the firmware?

pineapplefun101 said:
No, I am not bootloader unlocked currently. Currently installing RSD lite and going to see if i can find the xml. Do I need to be bootloader unlocked to flash the firmware?
Click to expand...
Click to collapse
No

I can't seem to find the original .xml to flash it with, is there an alternative way I can get it???

pineapplefun101 said:
I can't seem to find the original .xml to flash it with, is there an alternative way I can get it???
Click to expand...
Click to collapse
This must be it, no?
https://mirrors.lolinet.com/firmware/moto/addison/official/RETUS/
...49-4
---------- Post added at 04:41 PM ---------- Previous post was at 04:35 PM ----------
Here too
http://www.getdroidtips.com/moto-z-play-stock-firmware-collection/
---------- Post added at 04:50 PM ---------- Previous post was at 04:41 PM ----------
I hope the baseband is right.
Abbra kaddabra @flashallthetime
I have not flashed in years. Would you help here?
Ty

aviwdoowks said:
This must be it, no?
https://mirrors.lolinet.com/firmware/moto/addison/official/RETUS/
...49-4
---------- Post added at 04:41 PM ---------- Previous post was at 04:35 PM ----------
Here too
http://www.getdroidtips.com/moto-z-play-stock-firmware-collection/
---------- Post added at 04:50 PM ---------- Previous post was at 04:41 PM ----------
I hope the baseband is right.
Abbra kaddabra @flashallthetime
I have not flashed in years. Would you help here?
Ty
Click to expand...
Click to collapse
What are you trying to do? All you need to do is flash only the 10 sparsechunks, OEM and boot.img

How to fix invalid IMEI error??

My IMEI got invalid and I am unable to get the signal too. Please help me in fixing the invalid IMEI error.

ruturajjena said:
My IMEI got invalid and I am unable to get the signal too. Please help me in fixing the invalid IMEI error.
Click to expand...
Click to collapse
What did you do?

Tried to change it. Do you have any solution ???

ruturajjena said:
Tried to change it. Do you have any solution ???
Click to expand...
Click to collapse
P2 isn't the device meant for IMEI experiments, didn't you look over the forum before as a warning?
Don't mess with any partition except system boot & recovery... unless it is thoroughly proved here in the forum to play.

You should be able to restore it by using a QCN backup. People have done it successfully in the past by downgrading to MM, restoring a working file and then updating to Nougat. I don't know if they got everything (2G, 3G and 4G) fully working though.
IMEI should never be touched unless you do not have a signal.

How to change IMEI to not-original
eried1 said:
You should be able to restore it by using a QCN backup. People have done it successfully in the past by downgrading to MM, restoring a working file and then updating to Nougat. I don't know if they got everything (2G, 3G and 4G) fully working though.
IMEI should never be touched unless you do not have a signal.
Click to expand...
Click to collapse
Please can anyone describe right way to change an IMEI on this phone?
I tried to downgrading to 6 version android and in two cases I changed IMEI correctly (by restoring backup from .qcn by QPST), but I can't remember all steps thich I did for this
Also, if I flash 7 android official lenovo room, I get "IMEI change error, it will restore after reboot" and after reboot I got my old original IMEI (I not need this because I tried to make wifi tenthering)
I tried to erase modemist 1,2 and fsg before I flashing .qcn backup by fastboot (fastboot erase fsg, etc....) and by adb ( dd if=/dev/zero) but my phone get bootloop after reboot.... I cant flash qcn backup before reboot
I suppose, I need flash custom room after changing IMEI on 6th android, but I forget how to do it again... I downgrading by flash fastboot variuos versions (032, 048, 066) but IMEI actually not loses, even I don't see him then write *#06# in a dialer
Does anyone changed IMEI in this phone?

ruturajjena said:
My IMEI got invalid and I am unable to get the signal too. Please help me in fixing the invalid IMEI error.
Click to expand...
Click to collapse
You can call or watsapp me I can help you number 8436243173

hi, somewhere here is another thread, where i made it succesfuly, try to find it
---------- Post added at 10:16 AM ---------- Previous post was at 10:11 AM ----------
here it is:
https://forum.xda-developers.com/showthread.php?t=3598615
https://forum.xda-developers.com/showthread.php?t=3670030
and here - most important: https://forum.xda-developers.com/showthread.php?t=3552973
hope that it help you and sorry for my english
---------- Post added at 10:21 AM ---------- Previous post was at 10:16 AM ----------
and i dont know if i have original IMEI because i dont know it before and i dont have original package
BUT !!! phone is fully working ... LTE, SMS, WIFI and CALLS --- everything
---------- Post added at 10:28 AM ---------- Previous post was at 10:21 AM ----------
... aanndd -- i found IMEI2 in my work invertory ... and it is right, though qcn was backuped from another P2, my colleague's phone
so you have a good chance (i was without phone almost two months
---------- Post added at 10:34 AM ---------- Previous post was at 10:28 AM ----------
and finally (i hope
i found IMEI1 and it is right too

Xiaomi Mi A2 Lite (global version) - 4g network signal issue

Hello
I'm having an issue where the network icon in the statusbar is changing every few seconds. from completely empty bars to almost full. never all the way full. And this is with 4g.
I tried switching to 3g (same problem) and 2g and with 2g I get full signal but realy that's not an option, too slow internet etc..
Thankyou in advance.

Try the factory reset!
You will lose all data and settings.

Gumka1977 said:
Try the factory reset!
You will lose all data and settings.
Click to expand...
Click to collapse
Okay I just tried that, didn't work.

Have you tried updating the software to the latest version?

saedkebbeh said:
Have you tried updating the software to the latest version?
Click to expand...
Click to collapse
Yes, it is on android 9. System is up-to-date. Patch 1 april 2019 it says.

Silverstryfe said:
Yes, it is on android 9. System is up-to-date. Patch 1 april 2019 it says.
Click to expand...
Click to collapse
I have read that if you install stock firmware through MiFlash (reinstall the firmware) the problem will be solved
---------- Post added at 08:18 PM ---------- Previous post was at 08:14 PM ----------
I bought the phone last Saturday, at first I noticed that the signal on the 2nd Sim comes and goes, but after the update, for now, everything seems to be fine, I hope you get your issue sorted out

saedkebbeh said:
I have read that if you install stock firmware through MiFlash (reinstall the firmware) the problem will be solved
---------- Post added at 08:18 PM ---------- Previous post was at 08:14 PM ----------
I bought the phone last Saturday, at first I noticed that the signal on the 2nd Sim comes and goes, but after the update, for now, everything seems to be fine, I hope you get your issue sorted out
Click to expand...
Click to collapse
So it is not a phone problem but a software problem from android 9? And by after the update you mean by reinstalling that firmware?

Silverstryfe said:
So it is not a phone problem but a software problem from android 9? And by after the update you mean by reinstalling that firmware?
I'm not sure if I want to lose my warrenty this fast by rooting it already though.. Realy no other way to fix it?
Click to expand...
Click to collapse
I didn't say anything about rooting, just reinstall the firmware using MiFlash

saedkebbeh said:
I didn't say anything about rooting, just reinstall the firmware using MiFlash
Click to expand...
Click to collapse
Ah it's not the same? My bad, sorry I don't know much about this. Can you help me out? I downloaded miflash tool, not sure what to do.

Silverstryfe said:
Ah it's not the same? My bad, sorry I don't know much about this. Can you help me out? I downloaded miflash tool, not sure what to do.
Click to expand...
Click to collapse
Search Google for this, there are many guides about this process

LM-G710ULM ver: V10b root

I have been searching the forms and am seeing multiple different answers to the Question, Can the LM-G710ULM ver: V10b be rooted? any final word on this? Thank you

ZKornecki said:
I have been searching the forms and am seeing multiple different answers to the Question, Can the LM-G710ULM ver: V10b be rooted? any final word on this? Thank you
Click to expand...
Click to collapse
As of today, the G710ULM bootloader cannot be unlocked.

I think its possible by remote unlocking.
https://forum.xda-developers.com/lg-v40/how-to/remote-unlocking-bootloader-models-t-t3946648/post79873169#post79873169

mr3p said:
As of today, the G710ULM bootloader cannot be unlocked.
Click to expand...
Click to collapse
Mr3p thanks for the quick response and this agrees with mostly everything I found on line. What's causing my confusion is I have a toggle in Settings/systems/developers options: enable OEM unlock. I can use adb to boot into fastboot without any trouble but the only patched image (patched_boot_10b.img) i have is for LM-710EM ver V10b. I want to make sure it is compatible with 710ulm. my full version number V10b-LAO-COM, Build# OPR1.170623.032. I would appreciate any input you have on this.
thanks
Zb

cheeze.keyk is correct that the G7ULM can be remote unlocked by loading a V35 engineering bootloader in place of your current bootloader. If you are comfortable having someone remotely access your phone via PC then it can be done, see link he referenced. My comments were regarding unlocking via normal LG unlocking process.
I'd have to look up that version number but doesn't match up with G7ULM. Can you do a screen shot where you are seeing it in your phone?

G710 ulm ?
Sure . You can .
At first, please update to 11b, i will show you. If u have telegram. Give me ur info.

mr3p said:
cheeze.keyk is correct that the G7ULM can be remote unlocked by loading a V35 engineering bootloader in place of your current bootloader. If you are comfortable having someone remotely access your phone via PC then it can be done, see link he referenced. My comments were regarding unlocking via normal LG unlocking process.
I'd have to look up that version number but doesn't match up with G7ULM. Can you do a screen shot where you are seeing it in your phone?
Click to expand...
Click to collapse
Hi this is a shared google photos album link https://photos.app.goo.gl/m6bFxHkUUj6bzZR76 with the info you requested. If there is anything else you need, just ask. thanks Zb

ZKornecki said:
Hi this is a shared google photos album link https://photos.app.goo.gl/m6bFxHkUUj6bzZR76 with the info you requested. If there is anything else you need, just ask. thanks Zb
Click to expand...
Click to collapse
Your G710ULM phone is loaded with old G710EM software.
---------- Post added at 04:34 PM ---------- Previous post was at 04:28 PM ----------
ValKyre said:
G710 ulm ?
Sure . You can .
At first, please update to 11b, i will show you. If u have telegram. Give me ur info.
Click to expand...
Click to collapse
11b? Current firmware for G710ULM is G710ULM10j
Is the unlock method you can't discuss here remote bootloader unlocking via v35 bootloader? If there is a way for us to do it ourselves I'm all ears.

mr3p said:
Your G710ULM phone is loaded with old G710EM software.
---------- Post added at 04:34 PM ---------- Previous post was at 04:28 PM ----------
11b? Current firmware for G710ULM is G710ULM10j
Is the unlock method you can't discuss here remote bootloader unlocking via v35 bootloader? If there is a way for us to do it ourselves I'm all ears.
Click to expand...
Click to collapse
.
Sorry . i miss.
It 11g . i can't discuss in here because i need more tester.
Im the first find way root for ulm11b. And then i ask from telegram group for what continue i need do.
And now V35 bootloader dont need anymore. Cause we already have g7ulm bootloader unlock file.
.
My phone is g7 ulm (check imei is sprint version). & now im on android pie 20bEM with root.

mr3p said:
Your G710ULM phone is loaded with old G710EM software.
Click to expand...
Click to collapse
Can I assume that following the procedure for rooting the 710EM will work on my phone?

ZKornecki said:
Can I assume that following the procedure for rooting the 710EM will work on my phone?
Click to expand...
Click to collapse
No it will not work because your phone is a G710ULM just loaded with a different model firmware. My best suggestion would be to restore ULM firmware back on the phone.

mr3p said:
Your G710ULM phone is loaded with old G710EM software.
---------- Post added at 04:34 PM ---------- Previous post was at 04:28 PM ----------
11b? Current firmware for G710ULM is G710ULM10j
Is the unlock method you can't discuss here remote bootloader unlocking via v35 bootloader? If there is a way for us to do it ourselves I'm all ears.
Click to expand...
Click to collapse
mr3p said:
No it will not work because your phone is a G710ULM just loaded with a different model firmware. My best suggestion would be to restore ULM firmware back on the phone.
Click to expand...
Click to collapse
How would I do that, I bought the phone less than a week ago and this is how it came. The security firmware is from May 2018 and LG bridge says it's up to date. Thanks for your help. Zb

ZKornecki said:
How would I do that, I bought the phone less than a week ago and this is how it came. The security firmware is from May 2018 and LG bridge says it's up to date. Thanks for your help. Zb
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg-g7-thinq/how-to/cross-flash-oreo-pie-firmwares-lg-g7-g7-t3915303
You can use LGUP windows app if you are comfortable recovering from failure if it soft bricks otherwise I would advise using command line to flash ULM firmware exactly as described.
---------- Post added at 09:30 PM ---------- Previous post was at 09:07 PM ----------
ValKyre said:
G710 ulm ?
Sure . You can .
At first, please update to 11b, i will show you. If u have telegram. Give me ur info.
Click to expand...
Click to collapse
Please check PM

mr3p said:
https://forum.xda-developers.com/lg-g7-thinq/how-to/cross-flash-oreo-pie-firmwares-lg-g7-g7-t3915303
You can use LGUP windows app if you are comfortable recovering from failure if it soft bricks otherwise I would advise using command line to flash ULM firmware exactly as described.
---------- Post added at 09:30 PM ---------- Previous post was at 09:07 PM ----------
Please check PM
Click to expand...
Click to collapse
It seems this was a unlocked or flashed US sprint phone if a previous life. not sure if it has a stock rom I can flash it with, LGUP seems fairly straight forward but I'm not sure what to flash it with. My IMEI says this model is an LGG710PM. again any suggestions from you would be appreciated. 
 @ValKyre thank-you for the offer but i'm sorry but I'm not willing to grant remote access.

ZKornecki said:
It seems this was a unlocked or flashed US sprint phone if a previous life. not sure if it has a stock rom I can flash it with, LGUP seems fairly straight forward but I'm not sure what to flash it with. My IMEI says this model is an LGG710PM. again any suggestions from you would be appreciated.
@ValKyre thank-you for the offer but i'm sorry but I'm not willing to grant remote access.
Click to expand...
Click to collapse
Unless I missed something, that's the first you've mentioned that your phone is Sprint model. It may be out there somewhere or you may have better luck searching however I looked for Sprint .kdz a couple of weeks ago but couldn't find one. You haven't mentioned your wireless provider so it's hard to make a recommendation but if you can't locate Sprint model firmware, I would flash the phone with the latest G710ULM firmware as that's the carrier unlocked version and should have the greatest compatibility. I vaguely recall reading someone taking a phone like yours back to a Sprint store where they were able to flash the phone back to Sprint firmware so you might consider trying that also.

mr3p said:
Unless I missed something, that's the first you've mentioned that your phone is Sprint model. It may be out there somewhere or you may have better luck searching however I looked for Sprint .kdz a couple of weeks ago but couldn't find one. You haven't mentioned your wireless provider so it's hard to make a recommendation but if you can't locate Sprint model firmware, I would flash the phone with the latest G710ULM firmware as that's the carrier unlocked version and should have the greatest compatibility. I vaguely recall reading someone taking a phone like yours back to a Sprint store where they were able to flash the phone back to Sprint firmware so you might consider trying that also.
Click to expand...
Click to collapse
@mr3p you're correct I just learned it was sprint model when I went to lg's site to download the firmware to revert it back as you suggested with lgup. It states that sprint, and all the major USA carrier's, can't be flashed. I Will give the 710ULM firm ware a try. I'll let you know how that goes. BTW thank you again for your help, Zb

ZKornecki said:
@mr3p you're correct I just learned it was sprint model when I went to lg's site to download the firmware to revert it back as you suggested with lgup. It states that sprint, and all the major USA carrier's, can't be flashed. I Will give the 710ULM firm ware a try. I'll let you know how that goes. BTW thank you again for your help, Zb
Click to expand...
Click to collapse
@MrP3 thank you for your input, after soft bricking the phone I found the correct DLL for LGUP and was able to upgrade to ver lg710ulm2g. this version still comes with the bootloader unlock option in the developer menu> i'll continue to research/play with it to see if root is possible.

ValKyre said:
.
Sorry . i miss.
It 11g . i can't discuss in here because i need more tester.
Im the first find way root for ulm11b. And then i ask from telegram group for what continue i need do.
And now V35 bootloader dont need anymore. Cause we already have g7ulm bootloader unlock file.
.
My phone is g7 ulm (check imei is sprint version). & now im on android pie 20bEM with root.
Click to expand...
Click to collapse
I am confused. If your phone is Sprint IMEI do you mean that it was a Sprint G7 loaded with ULM software? If your phone is Sprint model are you saying that ULM firmware is the only requirement to achieve root?
---------- Post added at 04:06 PM ---------- Previous post was at 04:02 PM ----------
ValKyre said:
.
Sorry . i miss.
It 11g . i can't discuss in here because i need more tester.
Im the first find way root for ulm11b. And then i ask from telegram group for what continue i need do.
And now V35 bootloader dont need anymore. Cause we already have g7ulm bootloader unlock file.
.
My phone is g7 ulm (check imei is sprint version). & now im on android pie 20bEM with root.
Click to expand...
Click to collapse
ZKornecki said:
@MrP3 thank you for your input, after soft bricking the phone I found the correct DLL for LGUP and was able to upgrade to ver lg710ulm2g. this version still comes with the bootloader unlock option in the developer menu> i'll continue to research/play with it to see if root is possible.
Click to expand...
Click to collapse
lg710ulm2g? Did you see ULM firmware versions here?

mr3p said:
I am confused. If your phone is Sprint IMEI do you mean that it was a Sprint G7 loaded with ULM software? If your phone is Sprint model are you saying that ULM firmware is the only requirement to achieve root?
---------- Post added at 04:06 PM ---------- Previous post was at 04:02 PM ----------
lg710ulm2g? Did you see ULM firmware versions here?
Click to expand...
Click to collapse
I had the J version 9G710ULM10j_00_NAO_US_OP_0219.kdz) but that is what bricked me, the only update that took was [GFI]G710ULM10g_00_NAO_US_OP_0913. I am making the assumption that the same 'LGUP Common DLL' should work regardless kdz file I use. I just can't seem to find a newer firmware file that doesn't stop after 11%.

ZKornecki said:
I had the J version 9G710ULM10j_00_NAO_US_OP_0219.kdz) but that is what bricked me, the only update that took was [GFI]G710ULM10g_00_NAO_US_OP_0913. I am making the assumption that the same 'LGUP Common DLL' should work regardless kdz file I use. I just can't seem to find a newer firmware file that doesn't stop after 11%.
Click to expand...
Click to collapse
Did the failed firmware load occur with the windows app or command line as suggested?