Hello and good morning guys! I have a question:
I own a navigation from the eonon seller, called Eonon GA8157, that is actually a PX3 Rockchip 3188, MCTD with KBT mcu.
I'm looking for a board upgrade to px5 (quad + 4gb ram) because mine is kinda slow. I'm very hard to please and i want the navi to be fast .
I tried all the softwares, the launchers, and i stopped at malasyk + car launcher, but i want more, so... i tried searching for some android boards but i'm not sure if they are compatible.
The slot seems to be compabile, but i don't know about the hardware itself, and maybe you guys could help me with a link or a name.
I found this one that seems ok, but it says that its not compabile with something, and i really don't want to blind buy :
https://www.aliexpress.com/item/WIT...d-system-DVD-Android-7-1-and/32840635444.html
I'm sorry if this is already discussed, but i didn't find a relevant thread .
Thanks in advance!
The link leads to a PX30 board with 2GB RAM and 16GB ROM, not a PX5 board. However, I've read posts where people bought a board and replaced it. Maybe try the search function and look for those posts.
https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20190415082438&SearchText=coreboard
Eonon GA2165 PX3
Please give feedback if you buy a board. I own a Eonon GA2165 which is a PX3 as well. I too am looking to upgrade and want to know if the Witson PX30 or a KLYDE core board is the way to go. I emailed Eonon directly and asked for an upgraded board but they were not willing to sell me one. They said the hardware and software is different and it's not possible. I don't believe them and think they just want to sell me a new radio.
Upgrate Px3 MTC RK3188 to PX5
Hello Everey One
im trying to upgrate my corebord RK3188 1GB RAM 16 ROM To PX5 4GB RAM 63/32 ROM , i Order from aliexprees WITSON Poweron Store PX5 Corebord but when i recived the bord i find dffrint between new board HCT-PX5 And MY old one RK3188
i can see 4 pins more in the new bord please take look the photo attachment
please if any one have solution or if can i find datasheet for both bord will help
i dont know who to solve this problem ? and the other Question is if i pay new mother bord compatable with the new corebord im not sure if will work
Please Any solution ASAP
Thanks ...
---------- Post added at 06:52 PM ---------- Previous post was at 06:45 PM ----------
sorry i can share photo link becouse this firs post for me
MOhanaddirar said:
Hello Everey One
im trying to upgrate my corebord RK3188 1GB RAM 16 ROM To PX5 4GB RAM 63/32 ROM , i Order from aliexprees WITSON Poweron Store PX5 Corebord but when i recived the bord i find dffrint between new board HCT-PX5 And MY old one RK3188
i can see 4 pins more in the new bord please take look the photo attachment
please if any one have solution or if can i find datasheet for both bord will help
i dont know who to solve this problem ? and the other Question is if i pay new mother bord compatable with the new corebord im not sure if will work
Please Any solution ASAP
Thanks ...
---------- Post added at 06:52 PM ---------- Previous post was at 06:45 PM ----------
sorry i can share photo link becouse this firs post for me
Click to expand...
Click to collapse
Look at the message that someone wrote on their aliexpress page:
The board is super, everything works. Put instead of the old PX3 1/16 board. Heaven and Earth! There is a nuance: If your radio does not have DSP, then the landing pad on the board will be shorter (there are not enough 4 pins). Don't be afraid, everything will work. Also I advise you to immediately put the radiator, the thermal interface of the regular Kuram for laughter! 04 Apr 2020 11:17
So, it should work just fine.
Related
Hey guys I'm sure there is someone how can help me with my device
First at all I have a knowledge in Root my Android phones any kind of labels and I played with many Roms....
And now I have in my car a Android Head Unit ...and actually reading this threads here about MCU und Firmware,there are some points I have to know....eeeehhhhh I m not understand!
Take a look and help me what do I need for a new ROM....the original have only bugs and pumpkin audio will not give me an update because it was an old unit...they say
model number:rk3188
current Android:4.4.4
kernel version:3.0.36+ red [email protected]#87
build number:
Alex:5701-20160404-125900-v3(4752)
TFT:5703-20151213-173908-V01
MCU:5703-20160428-113328-V01
please for a short lesson like Ian newby
First sorry for my realy Bad english.
I have just a lil question. I am Intrested long time Ago in a Double din Android Car Unit. and from searching i also did see the entries there. (I did just see the Andriod Head units Forum) that was long time ago,
Just today i did see now this MTCB/(C) and MTCD threads. i did read the Hui Fei Type Wiki but just did understand MTCB and MTCC is the same (right?) and it`s all about the microcontroller.
I aslo did see this thread : https://forum.xda-developers.com/android-auto/mtcb-android-head-unit-general/mtcb-vs-mtcd-t3371252
But i didnt get it. from the information from this thread could it be that hardware who is runing - android 4.4.4 is MTCB and hardware what is runing above android 4.4.4 - is MTCD?
thx for you help
Need some help with a new PX6 Head Unit I just purchased from China for my Audi. I am new at this so I apologize in advance and appreciate any help.
Here is my information:
MCUVer: 415175bLZH-Q5-AL-7-190817[170325]
FrameworkVer: 9 PQ2A.190305.002.eng.work2.20190826.163102
AndroidVer: 9
APPVer: 2019082701T_1024X600_970
Nadflash: 16.86G/22.52G
RAM: 4G
UUID: 010E6A88-3BFD-00B6-0000-000100001A88
Is there an update for this unit.
Also this unit shows me the OEM UI, do updates need to be specific to Audi for the Audi UI to display?
Thank you in advance.
Not an MTCD unit, you might have to try search.
marchnz said:
Not an MTCD unit, you might have to try search.
Click to expand...
Click to collapse
Thank you for the reply and pointing me in the right direction.
Android 9.0
Hi can u help me i have same android like u can u tell me do you found a upgrade ?
Hello all,
I am getting tired of my original radio. What VW is doing is ridiculous.
Now I'm looking for an Android radio which integrates perfectly into my Golf 7. Do you have a few tips for me?
A high resolution, large display and good performance are important to me. I am very grateful for any suggestion!
Thanks a lot
Not MTCB, after all the units are no longer available. Perhaps you want to post in Android Head units forum.
Good question
Yes... but there is no answer
hahaha
isRaZZe said:
Yes... but there is no answer
Click to expand...
Click to collapse
Probably due to posting in a sunset forum
All the head units seem to have an MCU that's MTC*. My head unit is MCU: MCXS7 which I can't find any info on. Is there any compatible firmware for this unit?
Try [Android Head units] forum, and searching forums with MCU prefix.
Your unit is not MTCx
It looks to be an odd ball.
marchnz said:
Try [Android Head units] forum, and searching forums with MCU prefix.
Your unit is not MTCx
It looks to be an odd ball.
Click to expand...
Click to collapse
If the system is saying it's MCU: MCXS7.190701(W) but isn't, is there any way to bring up what it really is?
I already posted on the Android Head Units forum a week ago and no response.
Turbognx said:
If the system is saying it's MCU: MCXS7.190701(W) but isn't, is there any way to bring up what it really is?
I already posted on the Android Head Units forum a week ago and no response.
Click to expand...
Click to collapse
It's not an MTCB,C,D,E,P,,H variant. The hardware determines the type.
In any case , suggest buying a FYT based UIS7862, as sold by chinese seller mekede/ navifly and others.
Before buying, ask seller for screenshots of Android System info and know what you are buying. So many buy and end up here asking what to do.