hi to all then I am in possession of this car radio hizpo android 7.1 today done update after having finished the car radio turns on but there are only the keystrokes but the screen remains black or tried to go into recovery mode but without success someone knows how to do it I regret apologizing for my bad English but I use the translator
Related
Hi ,
My head unit was working great until i had an electrical short in my fuse box , unit wasnt able to come up again , ao we did a hard reset after that it came up but all the buttons are missed up , dvd eject is navigate- home button is Bluetooth... And radio stopped working , tried factory settings but no success
My unit is mtcb-yz i think its roadmaster (RM1, YZ)
Android 4.4.4
Rk3188
Please help
looks like this here could be klyde with mcu of roadmaster?
dx.com/p/klyde-kd-7044-7-android-4-2-2-car-dvd-player-w-1gb-ram-8gb-flash-gps-wi-fi-for-kia-sportage-353715#.V1a9Ub7wx6I
hi guys i own a Eonon 2165 7.1 Android HU running www 2.94 after ive been trying to go back to my original KLD 2.94. after i updated my unit to Malaysk 5.0 and the OTA to 5.2 that came after, i noticed that the unit will boot randomly, after the car its been parked for a few days it comes on and stays on as long as there is power. then i noticed that the buttons on front (theones that change color few days after that the LEDs here on mention when from the red i had them set, to white almost non visible specially during the day.
but things got worst, i could access the unit, tried all combinations of buttons to no avail as if they had gone away. since i had no leds nor screen to guide me i finally had some luck and got into i the recovery and tried to flash the most recent KLD or WWW MCUS but they all give me the same problem
Ii get the error *IAP_A_REQ time out 1 here is a pic https://yadi.sk/i/WIlEpZ3lenVuvw
Ii get the error *IAP_A_REQ time out 2
Ii get the error *IAP_A_REQ time out 3
https://forum.xda-developers.com/android-auto/mtcd-android-head-units-general
UPDATE HCTIMG FAILED
any help would be appreciated.
Good morning!
I have bought a Hizpo Android radio for my Mercedes Benz Vito w639 (2012). This car haven't got steering wheel or controller for the radio, so I installed it without canbus (as the seller told me) and connecting Illumination and ACC directly to the car, bypassing the canbus.
The thing is that It started working perfectly the first day, but after some time the radio started to do really weird things, like resetting alone or getting looped on the startup showing a black screen with backlight on. Sometimes it works again for 1 day and after that starts again to fail. Anyone knows what is happening? I tried to access the recovery mode for trying a wipe, but I don't know the proper combination of buttons (this radio doesn't have physical buttons, only a reset button).
I don't know if in this forum is allowed to post the link of the website where I bought the radio, but if it's possible just tell me and I paste it.
I have a video of what happens when the radio starts to fail, but I cannot link it already to the post cuz I have less than 10 posts :crying: If you need them for helping me just tell me and I will send you a PM!
Thx for your help!! :laugh:
Nithilgan said:
Good morning!
I have bought a Hizpo Android radio for my Mercedes Benz Vito w639 (2012). This car haven't got steering wheel or controller for the radio, so I installed it without canbus (as the seller told me) and connecting Illumination and ACC directly to the car, bypassing the canbus.
The thing is that It started working perfectly the first day, but after some time the radio started to do really weird things, like resetting alone or getting looped on the startup showing a black screen with backlight on. Sometimes it works again for 1 day and after that starts again to fail. Anyone knows what is happening? I tried to access the recovery mode for trying a wipe, but I don't know the proper combination of buttons (this radio doesn't have physical buttons, only a reset button).
I don't know if in this forum is allowed to post the link of the website where I bought the radio, but if it's possible just tell me and I paste it.
I have a video of what happens when the radio starts to fail, but I cannot link it already to the post cuz I have less than 10 posts :crying: If you need them for helping me just tell me and I will send you a PM!
Thx for your help!! :laugh:
Click to expand...
Click to collapse
What did the reseller suggest when you contacted them for support?
marchnz said:
What did the reseller suggest when you contacted them for support?
Click to expand...
Click to collapse
Nothing at all, He didn't answer my messages at this moment.
hello....I keep getting this error code: 001, does anybody has a solution?
Hello. I just bought PX6 Android 10 car multimedia unit. It had no sound and steering control, so I thought I would update MCU and system. No I still not only didin't cleared the issues, but the screen is off to the side (lost about 20% screen), touch is out of normal operation, and have verson unmatched warning.....
Could someone help?
It was
MCU MTCE_HXD_V3.56_3
It's all touch, so is there a way to boot to recovery mode? I managed once, but can't repeat it, RST looks like not working and I'm desperated...
Welcome new member. Suggest taking some time to have a read through, you're likely to find related post and information.
hello people. few days ago i had installed a wrong update version for my head unit and now i got this problem my stereo keep restarting and i cant do nothing .
maybe some know how to force android factory reset menu
Is it an MTCD/E or P type unit?
marchnz said:
Is it an MTCD/E or P type unit?
Click to expand...
Click to collapse
how i can see that?
Hi there,
Someone please help to guide me how to deal with the issue of wrong mcu update on px30 HU?
After update, I saw unmatched red notice on the screen but went on to update android version and the HU just stopped working but only the bottoms light flashing even after turning off car, so have to take out fuse to avoid battery drain.
Please see the image and a vid.
Thanks
Alam1974 said:
Hi there,
Someone please help to guide me how to deal with the issue of wrong mcu update on px30 HU?
After update, I saw unmatched red notice on the screen but went on to update android version and the HU just stopped working but only the bottoms light flashing even after turning off car, so have to take out fuse to avoid battery drain.
Please see the image and a vid.
Thanks
Click to expand...
Click to collapse
Vid attached now