Related
I noticed after rooting that I went from firmware U to U1.
I guess my question is can I use normal Odin to flash SM-G955U1 firmware and have my phone unlocked so I can use my goole Fi sim card?
Kaldrick said:
I noticed after rooting that I went from firmware U to U1.
I guess my question is can I use normal Odin to flash SM-G955U1 firmware and have my phone unlocked so I can use my goole Fi sim card?
Click to expand...
Click to collapse
Flashing the firmware alone will not unlock the phone. You must have the carrier it is attached to unlock it first.
Milly7 said:
Flashing the firmware alone will not unlock the phone. You must have the carrier it is attached to unlock it first.
Click to expand...
Click to collapse
Hi, could i do the reverse? i have a g955u1 Us version, can install the ATT firmware to it? will it work?
nlesir said:
Hi, could i do the reverse? i have a g955u1 Us version, can install the ATT firmware to it? will it work?
Click to expand...
Click to collapse
When you buy a Galaxy S8 Plus at a store in the usa like Best buy or other, you will get the model SM-G955U1 which is unlocked and it works will att and tmobile sim cards, i have that model and works fine with Tmobile.
S8+ # labels
-G955U locked to USA carriers version
-G955U1 is the Unlocked version
Kaldrick said:
I noticed after rooting that I went from firmware U to U1.
I guess my question is can I use normal Odin to flash SM-G955U1 firmware and have my phone unlocked so I can use my goole Fi sim card?
Click to expand...
Click to collapse
You can use ODIN to flash U1 firmware for a bloatfree experience, but that WILL NOT carrier unlock your device. It has to be unlocked by the carrier. Either by calling them direct or paying for an unlock service. But if your phone is paid off, your carrier will unlock it for free.
nlesir said:
Hi, could i do the reverse? i have a g955u1 Us version, can install the ATT firmware to it? will it work?
Click to expand...
Click to collapse
Of course. Search the forums and carrier switching thread.
iSeven77 said:
When you buy a Galaxy S8 Plus at a store in the usa like Best buy or other, you will get the model SM-G955U1 which is unlocked and it works will att and tmobile sim cards, i have that model and works fine with Tmobile.
Click to expand...
Click to collapse
That's a half truth. You CAN purchase the U1 model at Best Buy, but only if you specifically ask for it. They also sell the carrier versions for ATT, Verizon, and I believe Sprint.
The U1 can also be purchased directly from Samsung, as well as the carrier versions.
Yes the U1 works with ALL major US carriers. I.e. Verizon, Sprint, ATT, T-Mobile, US Cellular, and all their MVNOs.
You can try my post i would like to help you
Mr. Orange 645 said:
You can use ODIN to flash U1 firmware for a bloatfree experience, but that WILL NOT carrier unlock your device. It has to be unlocked by the carrier. Either by calling them direct or paying for an unlock service. But if your phone is paid off, your carrier will unlock it for free.
Of course. Search the forums and carrier switching thread.
That's a half truth. You CAN purchase the U1 model at Best Buy, but only if you specifically ask for it. They also sell the carrier versions for ATT, Verizon, and I believe Sprint.
The U1 can also be purchased directly from Samsung, as well as the carrier versions.
Yes the U1 works with ALL major US carriers. I.e. Verizon, Sprint, ATT, T-Mobile, US Cellular, and all their MVNOs.
Click to expand...
Click to collapse
i keep on getting this error in odin <ID:0/004> abl.elf
leonardojt said:
i keep on getting this error in odin <ID:0/004> abl.elf
Click to expand...
Click to collapse
use latest Odin 3.13.1
TQ
ikrishaary said:
use latest Odin 3.13.1
TQ
Click to expand...
Click to collapse
Thanks, it worked
I have the U1 and flashed U firmware, and was trying to go back to U1 and Odin is being a pita about it.
Any pointers on how to get my U1 phone that thinks it's a U now, to get back to being a U1? Get a binary error when I try. I have both firmware. U oddly says it's an XAS file (phone still shows being XAA, but U1 is an XAA file, both from sammob, and both are latest updates, Dec. 1st.).
h2o2h said:
I have the U1 and flashed U firmware, and was trying to go back to U1 and Odin is being a pita about it.
Any pointers on how to get my U1 phone that thinks it's a U now, to get back to being a U1? Get a binary error when I try. I have both firmware. U oddly says it's an XAS file (phone still shows being XAA, but U1 is an XAA file, both from sammob, and both are latest updates, Dec. 1st.).
Click to expand...
Click to collapse
If your getting a binary error either you are 1 of 3 things. Using older firmware than on the device. You need to flash the combination file then subsequent firmware. Like u1 combo u. Or u combo u1. Or wrong odin. 3.13b
Sir pls help for me my samsung galaxy s8 plus model no is (SM-G955U) can i flashed firmware like (SM-G955F) pls help me.
WasifMeraj said:
Sir pls help for me my samsung galaxy s8 plus model no is (SM-G955U) can i flashed firmware like (SM-G955F) pls help me.
Click to expand...
Click to collapse
No you cannot.
TheMadScientist said:
No you cannot.
Click to expand...
Click to collapse
Thank you sir for replying.
flashed the tmobile rom via odin. i still have the att splash screen, and carrier says att (i have my tmo sim in the phone). any thoughts?
ford12acing said:
flashed the tmobile rom via odin. i still have the att splash screen, and carrier says att (i have my tmo sim in the phone). any thoughts?
Click to expand...
Click to collapse
you will need the complete firmware for the t-mobile firmware AP,BL,CP,CSC (not home_csc) or you can try either. The CSC is what makes it carrier specific as to what modifications the carrier has added.
podagee said:
you will need the complete firmware for the t-mobile firmware AP,BL,CP,CSC (not home_csc) or you can try either. The CSC is what makes it carrier specific as to what modifications the carrier has added.
Click to expand...
Click to collapse
any idea where it can be found?
you need to carrier switch from ATT to TMB then flash tmobile or unlocked firmware. here's the thread on how to do it LINK
colphelps said:
any idea where it can be found?
Click to expand...
Click to collapse
see my answer above. forgot to quote you the 1st time so you'd get a notification. Hope this helps!
I successfully went to 2ARF4 on this and it's now a G960U1 but I'd like the AT&T wifi calling, is it possible to flash the AT&T software to gain that or does it have to be a AT&T branded device for their system to register it? If it's possible which OS version should I get, I don't see a ATT version of the one that's on here or anything that would be the alternative.
You can get Sprint S9 or S9+ variant unlocked through Ebay:
https://m.ebay.com/itm/SPRINT-SAMSU...?_trksid=p3984.m1561.l2649&_mwBanner=1&_rdt=1
Also can do Bad IMEI devices also.
After you're unlocked should convert to ATT software when you insert sim.
Sent from my SM-G955U1 using Tapatalk
It hasn't converted to AT&T software on the U1 firmware I flashed. That's why I started the thread to see if anyone else has been able to
Sent from my SM-G960U1 using Tapatalk
First SIM unlock the phone...
Then, Use an unlocked and generic firmware like g960usqs3brj6 and flash with newest Odin.... Use csc NOT home csc and do NOT insert a SIM....
Factory reset, boot phone and setup to home screen... Then just pop in an AT&T sim and click restart device. It should install everything you need for att. I am running att video calling and all other features on my g960u with the above firmware and have no problems... Lists ATT/ATT/SPR under service provider now... Good Luck!
I got Note 10+ 256gb unlocked version from Samsung. Planning on using it on Tmobile. Do I need to do anything specific to make it more compatible with Tmobile. I've currently unlocked s10e on Tmobile and overall network coverage seems bit subpar compared to Galaxy S8 that I purchased from Tmobile.
So I'm just curious if I need to do anything for Note 10+ ince I get it, to make it more network friendly.
Sent from my SM-G970U1 using Tapatalk
Download the tmobile firmware from sam mobile and odin it to your unlocked.
I googled it but didn't have luck. Any chance there is a link to the T-Mobile firmware?
stu5797 said:
I googled it but didn't have luck. Any chance there is a link to the T-Mobile firmware?
Click to expand...
Click to collapse
It's not up on Sammobile yet...
But it is on samfrew
https://samfrew.com/download/Galaxy__Note10+__256GB__/c3pb/TMB/N975USQU1ASGO/N975UOYN1ASGO/
What about for the 512 version unlocked? Can use same as 256 unlocked?
And is it recommended to flash the firmware (T-Mobile in my case too) right out of the box or do you have to put your old sim in from your previous phone first, then setup your gmail acct and let the sim reach the T-Mobile network?
Never had unlocked phones so this will be a first, hence the questions...
I just flashed my Note 10+ with TMB fimware and it all went fine. here is the link from Sammobile https://www.sammobile.com/samsung/galaxy-note-10-plus/firmware/SM-N975U/
marctronixx said:
What about for the 512 version unlocked? Can use same as 256 unlocked?
And is it recommended to flash the firmware (T-Mobile in my case too) right out of the box or do you have to put your old sim in from your previous phone first, then setup your gmail acct and let the sim reach the T-Mobile network?
Never had unlocked phones so this will be a first, hence the questions...
Click to expand...
Click to collapse
It doesn't really matter. The storage size doesn't affect the firmware. It's all the same.
Flashing the carrier firmware will factory reset your device, so I wouldn't waste time setting it up first. Just put your SIM in and let it provision for T-Mobile. It happens automatically so there's nothing you have to do. Then flash the firmware with ODIN.
Just research and make sure you know what you're doing before flashing. ODIN is fairly fool proof, but it's still best to know what you're doing first.
Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
I thought you can flash without messing with your data.
stu5797 said:
Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
I thought you can flash without messing with your data.
Click to expand...
Click to collapse
Technically you can flash without messing data but will be difficult to identify the reasons if you encounter any issues after that. So its better to flash it now itself when its freshly out of the box
I was going to update the Unlocked firmware via OTA software update. Once I receive the update I will then flash the Tmobile firmware via Odin
marctronixx said:
What about for the 512 version unlocked? Can use same as 256 unlocked?
And is it recommended to flash the firmware (T-Mobile in my case too) right out of the box or do you have to put your old sim in from your previous phone first, then setup your gmail acct and let the sim reach the T-Mobile network?
Never had unlocked phones so this will be a first, hence the questions...
Click to expand...
Click to collapse
Just received my unlocked Note10+ 512GB an hour ago and, as was the case with my unlocked Note9, it works great out of the box with T-Mobile and Mint (a discount reseller). No custom flashes needed unless you want the TMO bloatware. I would leave it as-is and just download the respective carrier apps individually. Love this BEAST so far! :good:
I bought the note 10+ and i'm on the tmobile network. The only issue I'm having is VOLTE. To my knowledge VOLTE should work. Can anyone confirm this?
Hi guys I got a Verizon N975U note 10 plus and its stuck on Verizon I'm trying to flash it with U1 so I can pop a sim in and changes it to that carrier. Do I just need to flash it with the U1 file here https://androidfilehost.com/?w=files&flid=297980 or will it need something special the build # is SQS2ASJ8
johntudd said:
Hi guys I got a Verizon N975U note 10 plus and its stuck on Verizon I'm trying to flash it with U1 so I can pop a sim in and changes it to that carrier. Do I just need to flash it with the U1 file here https://androidfilehost.com/?w=files&flid=297980 or will it need something special the build # is SQS2ASJ8
Click to expand...
Click to collapse
Can't say for sure it would work on U firmware (lack of first hand experience to verify) as it would for U1.... As long as the phone is network/sim unlocked then you should be able to just put the new sim card in it (and the phone will read the sim card settings and apply them).
Flashing the U1 firmware instructions on flashing U1 firmware have been at link below (bottom of first post). You can get the firmware from that thread also.
https://forum.xda-developers.com/showpost.php?p=80072192&postcount=1
Of course keep in mind that none of this will matter unless the phone is sim/network unlocked. As long as you meet the requirements from Verizon (or the phone was blacklisted for either non payment, lost/stolen or a warranty/insurance exchange that wasn't sent in) then this shouldn't be an issue.
its locked to Verizon at the moment when I put a sim in it will work for a bit then say its not allowed to use another carriers sim at this time.
johntudd said:
its locked to Verizon at the moment when I put a sim in it will work for a bit then say its not allowed to use another carriers sim at this time.
Click to expand...
Click to collapse
Either wait until the phone is able to be unlocked by Verizon, or call them and request that they unlock it for you. Until that happens you will not be able to use a non-verizon sim card.
I would also advise keeping the U firmware for Verizon installed and not flashing the U1 firmware, as the Verizon sim/network unlock requires the carrier firmware... At least that is what I am gathering from various discussions/threads.
johntudd said:
Hi guys I got a Verizon N975U note 10 plus and its stuck on Verizon I'm trying to flash it with U1 so I can pop a sim in and changes it to that carrier. Do I just need to flash it with the U1 file here https://androidfilehost.com/?w=files&flid=297980 or will it need something special the build # is SQS2ASJ8
Click to expand...
Click to collapse
Is your phone carrier locked to Verizon? Has it been activated on Verizon's service for 30 days? If not, I'm pretty sure firmware flashing won't help anything. I'm on a Verizon MVNO and they wouldn't even unlock it for me to use on their own network. I had to activate with them for 30 days.
However, now that mine is unlocked, it's still locked down to Verizon in a lotof ways. My SIM card for my current carrier can't apply an APN, for example, so I have to do it manually. I'm contemplating flashing U1 to fix that issue (I hope).
I have a very similar situation. I bought a Note 10+ N975U (Verizon Unlocked) and I want to take it to U1 and then maybe to Sprint. I tried to go to the OP here and follow instructions. So I downloaded and selected all the files for U1 and apparently I did the "no-no" and got stopped with the SW Rev Check Fail : abl Fused 2 > Binary 1. I looked at what my phone is on and it is the SJ8 (November?) from Verizon. I'm guessing that means the BL file (bootloader?) in the U1 folder (SGO?) is older than what is on my phone? What do I need to do differently? I already tried without selecting the BL file, but it still gives the same error. Any help is appreciated! Thanks in advance!
baumanbt said:
I have a very similar situation. I bought a Note 10+ N975U (Verizon Unlocked) and I want to take it to U1 and then maybe to Sprint. I tried to go to the OP here and follow instructions. So I downloaded and selected all the files for U1 and apparently I did the "no-no" and got stopped with the SW Rev Check Fail : abl Fused 2 > Binary 1. I looked at what my phone is on and it is the SJ8 (November?) from Verizon. I'm guessing that means the BL file (bootloader?) in the U1 folder (SGO?) is older than what is on my phone? What do I need to do differently? I already tried without selecting the BL file, but it still gives the same error. Any help is appreciated! Thanks in advance!
Click to expand...
Click to collapse
The bootloader of the U1 firmware you were trying to flash is lower then what is currently on your phone. So yes you are correct that is the no-no. Also you can not skip the bootloader file when flashing, so that wouldn't have worked.
If you read through that thread you will have found others asking how to go from U to U1 firmware. Also the error within regards to trying to flash a lower bootloader version firmware was also asked and answered. I would encourage you to browse that thread and the Q&A forum because this process has been discussed on more then one occasion... It might contain helpful/useful info for you.
In short you need to get a newer firmware release. Using samfirm or frija apps, or the sammobile website look for the firmware your seeking. Google searching will show you how to obtain samfirm, frija is posted the forum here if I recall correctly.
For U1 the model is SM-N975U1 and the region is XAA.