Hello,
My wife recently had the misfortune to drop her newish HTC Desire A8183 on the kitchen floor, thanks to my daughter's over eager grab. The digitizer has some lovely cracks all over it now... :-(
Needless to say, my wife is dismayed, and my daughter (she's only 3 and didn't mean it) is very sorry.
I thought I'd try replacing the digitizer myself, having read many tales of repairs taking 3 weeks and costing 300+ dollars.
Bought a new digitizer, took phone apart (even had a handy little "oven" that I could set to 60 degrees to melt the glue).
Phone taken to pieces quite happily.
Put in new digitizer, reassemble.
Now start up phone, all looks good.
BUT... only a small section of the screen is responding to touch (where the 7,8,9) keys are when entering SIM PIN. The row below has also worked (although intermittently) and the emergency call button too...
So my question:
Is this a problem with the digitizer I bought? Is there a particular model number of digitizers that I should be using? I note that the old digitizer had an "I2" printed on the pcb, whereas the new one has an "E5", the old one has a sticker with SHAB1 on it whereas the new on has SHABN...
I'm not sure that this is important - but given that the thing only partly works, I think it might be.
Anyone got any ideas/hints for me to try... I'll phone the supplier tomorrow and suggest to them that the part is faulty, as I can't see any threads out there where this has happened to someone else.
EDIT: I thought I should add that the old digitizer despite looking like a spider's web, still actually works - which really make me think it is a problem with the new one...
Thanks for any help!
Chris
I can't really help you from experience all knowledge.
But I did read somewhere that you have to use specific digitizer for specific Desires.
I could be wrong
Did you work out any solution for your replacement digitizer issue?
I have a similar problem and I just realized the different ghost pattern of the screens (original has diagonal, new has square arrangements of dots) and also the electronics of the digitizer is slightly different (Original: Synaptics 940-663-1R1, replacement: Synaptics 940-682-1R2)
Hello,
I'v got the same problem, i even bought two digitizers from different sellers. I thought that it is because i did something wrong when I disassembly and assembled the phone but I put my old digitizer again and it works ok ( except the corner where it's crashed ).I asked my sellers if there are some different digitizers and they replayed that no and the one I'v got are checked and ok ( the electronics is identical, the only difference are white big number E2 and G2 ). What can I do more to repair my poor thing?
Stan
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Hey everyone,
I recently bought my HOX at my local AT&T store about a month ago and managed to drop within the first 2 weeks I had it, and break both the glass and LCD. I went on ebay and bought both the LCD and glass together and installed it on my phone with no luck. Screen is totally black with no response. Everthing else works flawlessly, vibrator, capacitive buttons, and speaker. The aftermarket LCD screen's cable was straight so I had to make a fold in it like the original cable was. I worry that that might be what the problem is, though I highly doubt it. I would appreciate it greatly if someone could give me some advice on what I should do at this point. Return the LCD and glass or try something else. Thanks
This is the forum for the quad core Tegra 3 OneX, I don't know if your phone (One XL, dual core snapdragon) has the same LCD.
Might be best to ask in the correct sub forum.
So while i was replacing the digitizer on this beauty, the lcd flex must have broken inside because it didnt seem like it so i have no display
also the optical button flex broke (Now im really screwed Tiny)
So im looking into ordering a samsung amoled screen from ebay even though my hardware version is the slcd version
Is it compatible or were there just screen changes and not motherboard changes when HTC said they're going to slcd for these devices?
MoonMaster345 said:
So while i was replacing the digitizer on this beauty, the lcd flex must have broken inside because it didnt seem like it so i have no display
also the optical button flex broke (Now im really screwed Tiny)
So im looking into ordering a samsung amoled screen from ebay even though my hardware version is the slcd version
Is it compatible or were there just screen changes and not motherboard changes when HTC said they're going to slcd for these devices?
Click to expand...
Click to collapse
I dont believe they are interchangable. Something to do with a graphics chip or something, ive seen this asked and answered somewhere here on xda before. Mabey someome who knows for sure will chime in.
Well this is unfortunate. And the fact that SLCD screens are more expensive than the amoleds online.
Can someone else confirm that they are not interchangable?
MoonMaster345 said:
Well this is unfortunate. And the fact that SLCD screens are more expensive than the amoleds online.
Can someone else confirm that they are not interchangable?
Click to expand...
Click to collapse
I would think they are but I don't know either way. The best thing for you to do is an xda or Google search into this.
Sent from my Galaxy Nexus using Tapatalk 2
I did some googling but couldnt find much. Found a lot of people asking but no one answering. I saw one thread where a guy said he did it, but when he turned it on he just got a pink screen. He wasnt sure if it was because of the screen type change, or if he just messed something up when putting it back together. Then the thread just died. The connectors on both are the same. I did notice though on some sites selling slcd replacements that there are 2 different types of slcd screen that shipped with the inc, and they make it sound as though they are not interchangable. You could try to contact htc, but who knows what would come of that.
They are not interchangable. AMOLED and SLCD. The way the pixels receive signal is different. AMOLED can turn individual pixels on/off while LCD can only change their color. They need different chips/drivers to work properly.
Hey guys, I bought the Samsung Galaxy TabPro 8.4 LTE variant (SM-T325) and unfortunately, just after 2 weeks of use, my friend dropped it and cracked the screen and scratched the bezels. I live in the UK and I bought this tab online. I know dropping the tab is out of warranty and I have to pay for the damages but I have contacted Samsung which they referred me to some of their repair centres but with no hope as they couldn't replace/repair the damage because my tab is the LTE variant and it's not of European Region.
I'm pretty pissed that my beautiful TabPro 8.4 is cracked and I'd do anything to fix it.
I just want to ask you guys for advice on how I should fix my tab if official samsung repair centres here can't do it because they don't have the parts? Or is my best bet taking it to a repair centre in Asia (where it's most likely from)?
Thank you if anyone replies ;_;
Not good when you crack your screen
The only and best advice i can give you is check Ebay, look up LCD & Digitizer for Galaxy Tab Pro 8.4 LTE, you should find it there. The best of luck Buddy..
Zakanam said:
Hey guys, I bought the Samsung Galaxy TabPro 8.4 LTE variant (SM-T325) and unfortunately, just after 2 weeks of use, my friend dropped it and cracked the screen and scratched the bezels. I live in the UK and I bought this tab online. I know dropping the tab is out of warranty and I have to pay for the damages but I have contacted Samsung which they referred me to some of their repair centres but with no hope as they couldn't replace/repair the damage because my tab is the LTE variant and it's not of European Region.
I'm pretty pissed that my beautiful TabPro 8.4 is cracked and I'd do anything to fix it.
I just want to ask you guys for advice on how I should fix my tab if official samsung repair centres here can't do it because they don't have the parts? Or is my best bet taking it to a repair centre in Asia (where it's most likely from)?
Thank you if anyone replies ;_;
Click to expand...
Click to collapse
Zakanam said:
Hey guys, I bought the Samsung Galaxy TabPro 8.4 LTE variant (SM-T325) and unfortunately, just after 2 weeks of use, my friend dropped it and cracked the screen and scratched the bezels. I live in the UK and I bought this tab online. I know dropping the tab is out of warranty and I have to pay for the damages but I have contacted Samsung which they referred me to some of their repair centres but with no hope as they couldn't replace/repair the damage because my tab is the LTE variant and it's not of European Region.
I'm pretty pissed that my beautiful TabPro 8.4 is cracked and I'd do anything to fix it.
I just want to ask you guys for advice on how I should fix my tab if official samsung repair centres here can't do it because they don't have the parts? Or is my best bet taking it to a repair centre in Asia (where it's most likely from)?
Thank you if anyone replies ;_;
Click to expand...
Click to collapse
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
THEDEVIOUS1 said:
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
Click to expand...
Click to collapse
LowaEastSide said:
The only and best advice i can give you is check Ebay, look up LCD & Digitizer for Galaxy Tab Pro 8.4 LTE, you should find it there. The best of luck Buddy..
Click to expand...
Click to collapse
Thanks guys for replying, I totally appreciate it but yeah, my LCD itself isn't broken, just the glass so the touch screen digitizer is what I need. However, if I buy from eBay or from the given link, will the glass be of the same quality/made from the same thing? Cause the touch screen glass on the TabPro 8.4 feels so smooth and not cheap so I don't really wanna change that :/
And also, do you guys now if they sell the bezels? since they scratched too
Thanks again!
Wow.
Im sorry to read the situation the both of you are in, as for the first post i replied to i did mention the LCD & Digitizer, however doing the research on Ebay the Digitizer Cant be found, that really sucks, just makes me MUCH MORE aware of NOT dropping my device, they do feel really light a delicate, with that said I love watching movies on it in 1080p, the clarity is unbelievable. I'm loving this device, But on the other hand there isn't any development for it out, really sucks cause i was looking to switch it to the Google Addition of Android.. Or if a developer can cook up a Custom Rom from the S5 Operating System that would be SICKKK... That how i have my Note 3 running, exactly like the S5, its hottt... the best of Luck to you both, hope it works out. BLESS..!!
THEDEVIOUS1 said:
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
Click to expand...
Click to collapse
LowaEastSide said:
Im sorry to read the situation the both of you are in, as for the first post i replied to i did mention the LCD & Digitizer, however doing the research on Ebay the Digitizer Cant be found, that really sucks, just makes me MUCH MORE aware of NOT dropping my device, they do feel really light a delicate, with that said I love watching movies on it in 1080p, the clarity is unbelievable. I'm loving this device, But on the other hand there isn't any development for it out, really sucks cause i was looking to switch it to the Google Addition of Android.. Or if a developer can cook up a Custom Rom from the S5 Operating System that would be SICKKK... That how i have my Note 3 running, exactly like the S5, its hottt... the best of Luck to you both, hope it works out. BLESS..!!
Click to expand...
Click to collapse
I actually replied to your thread about custom roms with something I was working on before the incident happened...its an extremely basic test build so its probably no where near what u want (no s5 setup) but if u want to test it out I posted the link in the other thread. I wish it was just my glass that was broken right now because it would already be fixed....I was able to find the digitizers on ebay althought there are only a few listings I'll post the lowest link below
EDIT: nevermind...probably should have checked my pm first. As far as the selinux function...if u go to "settings-general-about device" and scroll down to the very bottom u should see "se for android device" which will probably say "enforcing" although hopefully it will be set to "permissive" which would allow us to connect NTFS(WINDOWS) formatted hard drives to our device as well as other things
Zakanam said:
Thanks guys for replying, I totally appreciate it but yeah, my LCD itself isn't broken, just the glass so the touch screen digitizer is what I need. However, if I buy from eBay or from the given link, will the glass be of the same quality/made from the same thing? Cause the touch screen glass on the TabPro 8.4 feels so smooth and not cheap so I don't really wanna change that :/
And also, do you guys now if they sell the bezels? since they scratched too
Thanks again!
Click to expand...
Click to collapse
@Zakanam as for the quality of the part as far as I know most lcds are factory originals while most digitizers are usually aftermarket reproductions although I haven't EVER had an issue with any I've replaced as far as registering touches or smoothness. As I stated above device repair is part of what I do for a living although i'll admit I may have just been lucky...u will most likely have to wait until someone puts an 8.4 up for parts on ebay before u can find the bezels however I hope this helps
http://www.ebay.com/itm/Touch-Screen-Digitizer-Glass-For-Samsung-Galaxy-Tab-Pro-8-4-T320-T321-T325-/201077168569?pt=Other_Tablet_eReader_Accessories&var=&hash=item2ed12219b9
^CHEAPEST DIGITIZER ON EBAY
Does anyone know where I can buy the OEM backplate and possibly the cheap silver trim between the backplate and the screen?
I wrote a review on Amazon about what happened under the same name. Got nowhere with Samsung support, while looking for parts I found this post. Figured someone here may know.
THEDEVIOUS1 said:
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
Click to expand...
Click to collapse
In the same predicament. The lcd display on my 8.4 LTE T325 is broken, but the digitizer still recognizes touch. Finding a replacement screen is a pain, especially in the UK. Only quote I've managed to get is for £169, which is more than what I paid for it on ebay....decisions decisions...
stoney73 said:
In the same predicament. The lcd display on my 8.4 LTE T325 is broken, but the digitizer still recognizes touch. Finding a replacement screen is a pain, especially in the UK. Only quote I've managed to get is for £169, which is more than what I paid for it on ebay....decisions decisions...
Click to expand...
Click to collapse
Similar situation when I broke the screen on my Note 8. While glass was available at a reasonable price, the process to get it unglued from the digitizer looked too involved for me. The price for screen + digitizer was similar to the price of buying a new Note 8. So my solution . . . was to buy the Pro 8.4!
redpoint73 said:
Similar situation when I broke the screen on my Note 8. While glass was available at a reasonable price, the process to get it unglued from the digitizer looked too involved for me. The price for screen + digitizer was similar to the price of buying a new Note 8. So my solution . . . was to buy the Pro 8.4!
Click to expand...
Click to collapse
Lol. My solution was to buy the tab S 8.4 LTE. Still wondering whether it's worth fixing the tab pro or not
Hello, i broke my lcd a week after buying it and found only one place that has the digitizer and lcd as one unit. Its costly! $159.00 + $10.00 shipping from Singapore! here is the link
http://www.parts4repair.com/samsung-galaxy-tab-pro-8-4-t320-parts/
I did it on mine but proly could have found a new tablet for the cost! The repair was very easy.
Hi I have a similar problem but with a different tablet thr tab 4 7 inch which does not have gorilla glass so whatever glass is put in it does the tabpro have gorilla glass?
Anyway 2 days after buying it I sat on my tab 4 by accident while it was sitting in its box on my bed, the tablet just sunk to 1 side and collapsed in the box so I am hoping I didn't do any damage. Ive been so worried about it when I look at the screen and lcd thrre is no damage or cracks I can see is it possible the lcd at thr back of it cluld be cracked? Or is it pretty obvious if it is cracked?
Looking at youtube for vids I see cracked screens but if thr lcd is cracked even just a little bit will it show?
I put thr tablet back in thr box an d pushed down on it with my fingers to try to see how mufh pressure it takes to collapse in the box again..and I heard a crack sound im so stupid..I don't see any damage still and I think the crack sound was from the see through plastic sheet inside rhe box and the cardboard pressing dosn against it.
If I dont see any cracks or damage to thr lcd is it most likely ok? Im so paranoid now. Maybe I should return it just ij case and get a replacement seeing as I am in my 28 day returns period
Is it safe to assume if I can't see any cracks its unlikely to br damaged?
i may say had a bad luck when buying online via lazada.my , CANT claim warranty . still under warranty, not caused by dropping, its factory defect.. sent to singapore but not fixed, send to local seller and returned back. this is my timeline https://www.youtube.com/watch?v=9DD4dz3VTUs
no choice i gotta put aside till have enough money by myself. looking at aliexpress and dhgate, price still beyond my budget
fyi, aliexpress and dhgate i had good purchase track record
please watch and spread this https://www.youtube.com/watch?v=9DD4dz3VTUs
price complete set http://www.aliexpress.com/item/For-...2272498413.html?spm=2114.32010308.5.11.WBmYM2
might be mean but if your friend dropped it, he should be paying
this happened to me to, but about a month, and a half latter.
THE ONLY ADVICE I would give you is to go take it somewhere and get it fixed by a professional. If you follow that one YouTube Video, all your going to manage is cracking the Actual Display underneath the Glass. As it is these pieces are fused and, are essentially one unit. While it might be possible to just replace the Glass. It's doubtfull that finding the right fixer (i.e. Glue) would-be that simple. It also (to me) seems like the Tab Pro also has a thin polarising film between the Glass and the LCD display. Which was too easily damaged with the String technique. Not so much a problem if you have an extra 50.00€ for a pack of 25 Strips @ 8.4"
About your best option is to locate the next Samsung Depot (for myself that would be in the Netherlands), and they want ca. ~120.00€ (Before Tax!), for a replacement unit. (i.e. the Touchscreen + LCD + Frame. e.g. more like 169~€ by the time you work out shipping & tax.
Having a thought about it... It was just cheaper in the end to by a totally new neused Device. Which then set me back a 175.00€.
but those Displays from Fleebay, are as I gather chepo counterfeit Chinese Displays which are not as good as the original ones. Be that as it may... I'd have yet to find one that came with the Frame (i.e. with the Home Button.), cause for ~115€ they sure don't, and again you'd have to figure out how to reglue that bit without destroying the new Display.
1miracle2 said:
Does anyone know where I can buy the OEM backplate and possibly the cheap silver trim between the backplate and the screen?
I wrote a review on Amazon about what happened under the same name. Got nowhere with Samsung support, while looking for parts I found this post. Figured someone here may know.
Click to expand...
Click to collapse
My guess is your supposed to recycle the Backplate from the Original Screen. I guess getting it off the old one may be one thing. But how you'd go about regluing it back to the new Screen is to me questionable.
The 'Silver' bit is the rear cover. So One would think you already had that bit. in fact it's between this and the Glass Panel where you need to take a thin but very stiff like a Driver's License. To pry open the Device.
Again the best way to go is either though Samsung Direct, or one of its other partners.
It would also be helpful to know the Part Nr. Which are:
GH97-15740A (White)
GH97-1574B (Black)
Needless to say at those prices... You may well be better off buying a whole new Device.
I have an excellent condition digitizer but the glass is cracked. If wants to buy it they will have to remove the glass. Its from a T705
I too have a replacementWhite Digitizer Screen (White), still in the Envelope it came in with. Which I bought in a panic, after having also dropped my first T325. T_T.
Unless your very skilled, or know someone who is, at removing said Damaged Digitizer. I would forget this exercise. As you will at the least of it damage the Polarising Filter (Between the Digitizer, and the LCD Display), and at worst actually damage the LCD Display.
Having replaced a few Chinese Devices with their cheap plastic Digitizers is nothing like the way Samsung have done it. Unfortunately both the Digitizer, and the LCD have been fused together, as One unit. Again with a sandwiched Polarising Filter in the Middle.
There have been some Videos of People fixing the T320 that way, but the T320 doesn't have a Speaker Grill on it either. When I tried it on m, first One, the Dental Floss kept getting caught on it, an eventually damaged the underlying Filter (Which if you had done this would appear as just White Light.) Eventually in that game of tug, and war the LCD completely disintegrated.
I eventually found the Part Number (from a Samsung Tech Manual) p, and was able to locate two possible locations from which to order a replacement Screen from. Samsung in the Netherlands, and some other 3'erd Party from Poland. But either way you were looking at about 160€'s before Postage, and VAT (e.g. Sales Tax, which was higher in the NL). Making a total replacement, both simplier, and more cost effective.
Did you try heating it up like in the videos? I think the key is getting the glue loosened up
Hi,
I need help regarding my Lg g3, model number is D858 HK dual sim. My outer screen lens cracked but the screen underneath works but of course the touch is not working probably. My questions are:
- Is my phone screen is the same as other lg g3 models like the single sim ones or since it is dual sim then the cable that fit to the board is different?
- How can I buy the proper screen? And do I have to buy the whole screen including the LCD as well?
flupo2000 said:
Hi,
I need help regarding my Lg g3, model number is D858 HK dual sim. My outer screen lens cracked but the screen underneath works but of course the touch is not working probably. My questions are:
- Is my phone screen is the same as other lg g3 models like the single sim ones or since it is dual sim then the cable that fit to the board is different?
- How can I buy the proper screen? And do I have to buy the whole screen including the LCD as well?
Click to expand...
Click to collapse
1) From looking at the listing on aliexpress im pretty sure it is the same as the D855 edition.
2) Buy from aliexpress. Yes you have to buy the whole thing, unless you want to apply the adhesive that glues the lcd and digitizer together yourself which is nearly impossible to do
3) Please be careful, aliexpress has some shady people. I bought a Nexus 5 screen once off it and it was broken when i recieved it in the mail. In your case there is also the possibility that lcd isnt a 2k screen
Thanks for the reply.
Actually I looked at aliexpress which comes in Google search intensively. The point is a couple of workshops told me its different while on ebay and aliexpress it shows it's the same screen. That's why I'm confused and decided to seek help here. The other thing is I would like to go for the whole thing complete but I was worried to buy it fofrom unreliable source and pay that much. So I need a good source.
Checked Aliexpress one more time and found no information about any of the screen is 2K. Does this mean there is no real replacement here for a cracked device? or better buy the glass lens only? please advise
flupo2000 said:
Checked Aliexpress one more time and found no information about any of the screen is 2K. Does this mean there is no real replacement here for a cracked device? or better buy the glass lens only? please advise
Click to expand...
Click to collapse
If you search ebay for 'g3 genuine screen replacement' or something similar you'll find what you need, they also state that the display is QHD (1440p). Costs around $150.
Hello,
the digitizer touch screen is interchangeable for all lg g3 models.
The LCD+touchscreen is interchangeable, too.
But the LCD+touchscreen+frame is not interchageable.
This is the part you may need:
http://www.etradesupply.com/lg-g3-d855-touch-screen-replacement.html
xymay said:
Hello,
the digitizer touch screen is interchangeable for all lg g3 models.
The LCD+touchscreen is interchangeable, too.
But the LCD+touchscreen+frame is not interchageable.
This is the part you may need:
http://www.etradesupply.com/lg-g3-d855-touch-screen-replacement.html
Click to expand...
Click to collapse
Are you that it is same for all models? Has anyone tried it and has it worked well?
---------- Post added at 09:17 AM ---------- Previous post was at 09:14 AM ----------
flupo2000 said:
Hi,
I need help regarding my Lg g3, model number is D858 HK dual sim. My outer screen lens cracked but the screen underneath works but of course the touch is not working probably. My questions are:
- Is my phone screen is the same as other lg g3 models like the single sim ones or since it is dual sim then the cable that fit to the board is different?
- How can I buy the proper screen? And do I have to buy the whole screen including the LCD as well?
Click to expand...
Click to collapse
Were you able to solve this problem using D855 screen on D858? I have the same issue. Replacement screens for D855 are available at my location but not for D858.
flupo2000 said:
Hi,
I need help regarding my Lg g3, model number is D858 HK dual sim. My outer screen lens cracked but the screen underneath works but of course the touch is not working probably. My questions are:
- Is my phone screen is the same as other lg g3 models like the single sim ones or since it is dual sim then the cable that fit to the board is different?
- How can I buy the proper screen? And do I have to buy the whole screen including the LCD as well?
Click to expand...
Click to collapse
Were you able to solve this problem using D855 screen on D858? I have the same issue. Replacement screens for D855 are available at my location but not for D858.
I switched motherboard from my D855 (EU) into D852 (canada) and it works perfectly..so screens are same.. only thing I noticed was back cover - specifically NFC antenna has 4 (EU) vs 2 (CAN) contacts...