Does anyone know if it's possible to buy replacement touch screen panels for these units? My capacitive touch panel shattered while I was applying a screen protector (I know right, what the hell?!). The LCD panel and everything else is fine, but the unit is useless without a touch screen.
It's a Belsee 10.1" Android 8.0 model (sorry, I'm too new to post links) which appears to be a resold KLD/Klyde model.
I ended up sourcing one from Klyde directly via Alibaba. I’m surprised by how big a gap there is between the actual LCD and the touch panel. No wonder this thing is hard to read in direct sunlight!
Related
Hi you guys, does anyone know if you disamble the artemis easy and replace the touch screen? ( i was mad and smashed it, i kind of regret it, i know i shoud get anger management !). The phone is working fine, since i can connect it to my pc, the only problem the screen is black!
any guys any ideas or experience?
thank you.
hi, depending on which part you have broken, will depend on how much it will cost. Its fairly easy to change tho. If you have a look in the Wiki there is a guide to repairing the Artemis.
There are two parts to the screen the 'touch' bit on top (digitiser) and the actual LCD screen. If it is just the touch bit that has broken, then you can get a replacement one for around £7 on eBay. If the LCD has broken (which i am guessing it has caus u said it is just a black screen) then you can get a digitiser and a LCD for around £30. It is easier to replace both, as it is just a unit which is stuck in with double sided tape. WARNING: the ribbon cable which plugs into the main board from the screen is VERY fragile!
Hope this helps
broken screen
there are two different screen modules available for the Artemis. They are NOT interchangeable. In one case touch-screen module and LCD screen are seperate and in the other case they are both integrated into one module.
regards,
Bjorden
your gonna have to open it like i did, and find out which screen!.. also the touch screen is replaceable but its a ***** to do.. just get the whole screen on ebay 40 usd lcd and touchscreen very simple plug and play
Today I received a replacement digitizer from China for my broken HTC Desire and I replaced the screen.
However it did fit perfect, I have a problem with the touch screen. Only the top right part of the screen is sensitive and the rest is irresponsible.
All the other functions of my phone is OK or at least seem to be OK.
I dismantled the device again and double checked the connections and I realized some difference between the electronics of the touch screens such as:
Original: Synaptics 940-663-1R1
Replacement: Synaptics 940-682-1R2
Has anyone have a similar experience or know a cure for that?
Hi all, i recently bought a new touch panel for my HOX couse the old one is semi working due a fall. With great surprise i see that the original lcd is literally attached to touch glass. So trying to remove original touch, is equal to break original LCD. And this happen to me. However, i bough the a new lcd and finally remount my HOX. But there something strange. The touch is in contact with the display, stange artifacts are visible on the screen on the contact points and the touch has only a semi working response. I've tried to move away the touch from the lcd to be sure that the new components are working...and infact are working well. So i understood thath i must use something to prevent the touch came in contact with the LCD. What can or must i use to complete the remount? Thanks
stalvatero said:
Hi all, i recently bought a new touch panel for my HOX couse the old one is semi working due a fall. With great surprise i see that the original lcd is literally attached to touch glass. So trying to remove original touch, is equal to break original LCD. And this happen to me. However, i bough the a new lcd and finally remount my HOX. But there something strange. The touch is in contact with the display, stange artifacts are visible on the screen on the contact points and the touch has only a semi working response. I've tried to move away the touch from the lcd to be sure that the new components are working...and infact are working well. So i understood thath i must use something to prevent the touch came in contact with the LCD. What can or must i use to complete the remount? Thanks
Click to expand...
Click to collapse
And that is the reason why you can find lcd panel + touch assembly (yes its more expensive), touch panel is already glued to lcd with "special" compound. It is not glued actually, more like adhesive compound.. When you broke lcd you should go for lcd+touch..
But you can check this one, maybe you find some answers :http://forum.xda-developers.com/showthread.php?t=1720900 and here :http://www.repairsuniverse.com/htc-one-x-screen-repair-video.html
Hello everyone.
Months ago my Samsung Tab Pro 8.4 felt into the floor which cracked the screen.
The touch screen was working and the colors of the tablet were still good.
Later I went to a store to put a new front which resulted in what you can see in the attached pictures [I CAN'T UPLOAD PICTURES YET]. They did a really bad job.
I don't know if the problem is just the front screen or if the entire LCD needs to be replaced. The difference is quite big in terms of money.
Can you help me on this? What should I buy: only the front LCD or the entire screen and touch?
Thanks for your help.
Can you give me an explanation, please? I really need to understand why.
tbica said:
Can you give me an explanation, please? I really need to understand why.
Click to expand...
Click to collapse
The digitizer+glass and the lcd are two different parts. If you see oddness in the screen display in terms of weird colors, stripes or artifacts, the lcd is broken. If touch doesn't work, or the glass is broken but it can still display normal colors etc, generally only the digitizer+glass needs replacement.
Sent from my SM-T320 with Tapatalk 4
amandalopolo said:
LCD Only: If the image under the glass is broken and the touch panel is NOT then you only need an LCD.
Touch Panel aka Digitizer: If the top touch panel or aka glass top is cracked or broken but the image under it is fine then you only need the Touch Panel.
Complete Screen with Touch Panel and LCD: If the top touch panel is broken and the lcd image is either black liquid or cracked you need a complete screen.
Click to expand...
Click to collapse
Thanks for the explanation.
So, I need the entire set. It's so expensive.
It's a shame that in the end the specs don't count so much. If we drop our toy, all depends on the screen.
tbica said:
Thanks for the explanation.
So, I need the entire set. It's so expensive.
It's a shame that in the end the specs don't count so much. If we drop our toy, all depends on the screen.
Click to expand...
Click to collapse
Your best bet would probably to send it to Samsung (maybe its under warranty or can make and exception), plus samsung probably warrantys their work.
or find a new /used lcd with the digitizer already pre-attached so its a easy install.
Got a great deal for this tablet locally ($75) with broken glass only and I've removed all the glass from lcd, tested it and still good. I have the glass screen already with LOCA and a UV lamp en-route. My question is about lcd assembly compatibility. If after re-gluing the screen and lcd back together and its not up to par and I have to buy the assembly can I use other model assemblies as a replacement like the t-800 ? I know I've probably word nuked this question but that's just me. Lol
Thanks for the help