Related
Hello everyone,
i tried to flash system via fastboot -u flash system with different treble rom arm64 a only:
phh 8.1
phh 9
havoc 1
and i got always the same issue: bootloop
i made factory reset with/without before/after, no change.
i also try recovery_ramdisk from emui 8.1 and emui 9, no change
Does anyone have successfully flash a treble img on P20 ?
thanks
Have you tried OpenKirin? Look on their website, they have roms with the aim of good compatibility with Kirin devices.
The only thing is that some people get this touchscreen issue but its a hit and miss. I managed to boot to the setup screen but I had the issue so I went back to stock. Apparently its supposed to be fixed in the next build.
i didn't know thanks i will try
The below is a guide to installing GSI images on the Mi 8 Pro. I specifically have experience with the PixelExperience 9.0 (Unofficial) but have had other GSI ROMs booting and working. I hope this is useful for some.
GSI (Generic System Image) ROMS can be flashed to any Project Treble enabled device. These devices have either an A/B partition layout (these allow for seamless updating as the system can boot from A or B partition) or just an A only partition layout. The Mi 8 Pro is an arm64 a only device and support project treble ROMs. You can choose from suitable ROMs listed here and here.
The instructions given below are for Android Pie (9.0). The same basic setup can be used for Android Oreo (8.0, 8.1) ROMs, but the Mi 8 Pro should be flashed with the appropriate Xiaomi base ROM first before flashing any 8 based GSI ROM
As the ROM development for the Mi 8 Pro is basically dead, I decided to buy a OnePlus 6T and sell my Mi 8 Pro. However, due to having my new OnePlus 6T stolen, and due to a lack of funds to buy a new device, I have revived my Mi 8 Pro to try to get something other than MIUI working on it. I now have The PixelExperience (Unofficial) GSI ROM running very smoothly on my Mi 8 Pro.
As the PixelExperience team has stated they will be delivering GSI images again, if there are enough of us asking, we could get better support for things like the fingerprint sensor, for a more complete experience.
Some of the below steps may be unnecessary, but are there for a complete beginner's guide to doing this and getting the right results.
Working:
WiFi
Bluetooth (with APTX)
NFC (Including Google Pay)
RIL
Mobile data (LTE / HSPDA / 3G / EDGE)
GPS
Camera (with camera built in to ROM, as well as some GCAM implementations)
Video Camera (not working on GCAM implementations tested so far - only working on Camer built in to ROM)
Flashlight
Sound / Vibrations
Face Unlock
Hotspot
Not Working:
VoLTE (I have had it working, but unable to end phone calls and problems receiving SMS messages, so reverted)
Fingerprint (There is some support. The fingerprint area of the screen lights up when trying to enrol a new fingerprint. The screen dims when a finger is placed on the sensor, and a green light us emitted from the sensor area, but it does not register the fingerprint and this is not currently working.)
Notification LED
You Tell Me
How to install
Flash the latest Fastboot Global Stable Android PIE (9.0) ROM for the Mi 8 Pro. (eg. equuleus_global_images_V10.3.4.0.PECMIXM_20190712.0000.00_9.0_global_9a181f79c1.tgz) using the Xiaomi Tool.
Update: Use the latest MIUI system. The contents of the vendor partition are important. The most compatible vendor partition as of 2019-08-19 is from equuleus_global_V10.3.5.0.PECMIXM. You can download and flash that vendor independantly, if you have already set up your GSI image.
Reboot and finish basic MIUI setup.
Reboot to recovery.
[*]Format data (Wipe - Advanced - format data - confirm by typing yes)
DO NOT FORMAT DATA. Just perform a factory reset. Formatting data can cause issues and prevent booting.
Wipe Cache - Dalvik Cache and System
Reboot recovery
Use adb to push PixelExperience GSI image (img file extracted from download) and latest version of Magisk to root of SDCard. (Empty due to formatting data).
("adb push c:\path\system.img /sdcard/" and then "adb push c:\path\Magiskv19.3.apk /sdcard/")
Flash the image to system partition by taping INSTALL and then on the "Install Image" button (to toggle between flashing zip and img files). Do not reboot yet.
Flash magisk zip in the normal way (hit the same button as in previous step to show zip files to flash. (This is necessary to avoid bootloops)
Reboot, and enjoy.
You can now set up your "PixelExperience" device with your apps and settings, including registering a face for face unlock.
To pass cts validation for the safetynet and to allow service such as Google Pay to work
In Magisk, under settings - Find “Magisk Hide” and toggle the switch on
Magisk restarts. Go to Magisk Hide from the Magisk menu and ensure that...
Google Pay
Google Play
Google Play Services
Google Service Framework
Any Banking Apps
...are checked so that they cannot see Magisk (canont see phone as rooted).
Now go to downloads and install the SafetyPatch v3 module (created by hackintosh5).
Reboot.
Open settings - go to apps and notifications - and find the above apps to clear all data.
Enjoy your rooted safetynet compliant, as close to stock as possible Xiaomi Mi 8 Pro.
nice work thanks for this great notice, i will test PixelExperience, how work the face unlock? i use the finger print very much, all day, but not work i will use the facial unlock. Then i wanna know how work this.
thanks!!
axelgrox said:
nice work thanks for this great notice, i will test PixelExperience, how work the face unlock? i use the finger print very much, all day, but not work i will use the facial unlock. Then i wanna know how work this.
thanks!!
Click to expand...
Click to collapse
Face unlock works fine. I have it paired with Pick to wake phone - so when I pick it up it wakes up to allow face unlock.
However, be prepared for some investment of time (not for face unlock).... I am a bit stuck now and cannot reproduce the above to get this working. Sometimes the results are different depending on base ROM etc.
Share how you get on and anything you may need to do to get this working.
Thanks
Nice work, i will try it .
The mi8 pro 's fingerprint is so bad which can be ignored, and the face unlock is the mostly used, hahahah
thank you very much for your work
Hi, I am waiting to unlock bootloader. Need 148hrs. Will install this. Thanks for sharing.
Quick update: There are some issues with GSI ROMs and the Mi 8 Pro. SOe of these relate to the SIMcard settings - and selection of preferred SIM for data, calls etc.
My experience shows that the vendor image from equuleus_global_V10.3.5.0.PECMIXM fixes many of these. The vendor image from the original MIUI ROM is used with the GSI system image to make the whole Project treble stuff work. I advise flashing this latest vendor image for maximum compatibility.
Do you know what issues remain after flashing the latest vendor image?
Does the face unlock on Pixel Experience work with IR camera or front cam?
I tried installing this and it got stuck on the loading screen with the Google logo. I tried following your instructions and a few other ways and couldn't get it to work at all i'm also not able to root my phone at all. When ever I try rooting my phone just reboots to twrp until I reflash the ram or flash the magisk uninstaller.
Do you have any tips, tricks, or suggestions I might try?
Thanks!
eremeya said:
I tried installing this and it got stuck on the loading screen with the Google logo. I tried following your instructions and a few other ways and couldn't get it to work at all i'm also not able to root my phone at all. When ever I try rooting my phone just reboots to twrp until I reflash the ram or flash the magisk uninstaller.
Do you have any tips, tricks, or suggestions I might try?
Thanks!
Click to expand...
Click to collapse
Have experienced this on occasion also.
What GSI image have you tried? after my multiple efforts, I would recommend... in this order: Omni. HavocOS, Descendant(no future updates), PIxelExperience. I am hopeful about the PixelExperience team who have made an announcement that as of August they will no longer produce CAF versions of PixelExperience, and that they will maintain regular GSI builds also. PE official GSI - I am full of hope.
Anyway, back on topic: Try this.
Follow the instructions - a few precisions:
Use XiaoMiFlash to flash the equuleus_global_images_V10.3.4.0 as a base. You can update the vendor partition once you have GSI up and running, but don't let the MIUI update to 10.3.5. Ensure you define a PIN to make sure that data partition is encrypted. (everyone should use encryption nowadays, and besides, I have had bad experiences whn using a xiaomi eu or mi-globe ROM (unencrypted) as the base
Reboot and finish basic MIUI setup. - What I mean here is to let the ROM boot, don't have to sign in to Google or Mi, but get to the home screen after the initial setup.
Then reboot fastboot and flash TWRP 3.3.0. Search for TWRP-3.3.0-0504-XIAOMI8UD-CN-wzsx150.zip.
Boot to TWRP. Make sure that you are able to decrypt the data partition with the PIN you set earlier. If TWRP does not ask you for the passcode / PIN - something is wrong. Try again. ONce all is OK in TWRP, perform factory reset. (DO NOT FORMAT DATA for the aforementioned encryption reason).
adb push the img file.
adb push the Magisk 19.3 zip.
Flash both in TWRP
Reboot TWRP
Reboot system. If it appears to hang, after 5 minutes you can force restart with the power button. I have had the ROM boot OK after second boot only?
Pretty sure that if you strictly follow the above you should get a working GSI image on Mi 8 Pro. Let me know...
It's a bit flaky to set up, but once set up, apart from fingerprint sensor not working, very stable and lovely to have the stock ish android system on a MIUI phone!
Be careful with preferred network type for mobile network as some selections have messed up incoming SMS messages for me... a dealbreaker.
What happens when you flash Magisk? What does TWRP say? Have you tried flashing Magisk, rebooting TWRP, and flahing Magisk again? It may be a TWRP version issue?
Thanks for your reply!
The version of twrp you mention is what I have used. I have not tried installing then rebooting to twrp so I try that.
When flashing magisk it usually flashes fine (I have had a couple times where it just throws an error) then when I reboot the phone will boot past the Mi logo the the Android boot logo then after 10-15 sec. it just reboots to twrp.
I was finally able to get the twrp to stick across boots by flashing twrp, signing boot image, removing twrp then reboot to Miui.
Do I need to adb push the GSI image or should it be fine to install from a USB drive?
The SMS issue isn't really a big deal for me as I use Google Fi routed through hangouts for one sim and a local sim where I'm living for mostly data and a few phone calls for the second one
Thanks so much for this post. I was completely oblivious to the fact that the Mi 8 Pro would actually be different to the Mi 8 when it comes to custom roms. When I decided on my next phone, I read the positive reviews and saw enough Mi 8 roms to be willing to make a switch to Xiaomi. Until I read your post I was close to despairing as I don't want a Xiaomi rom on my phone for various reasons (among them is the fact that I don't trust them and the way they have decided to collect user data).
I've tried to follow your guide in every step (I've also flashed the updated vendor.img), but unfortunately I have not been able to install the Pixel Experience rom on my device. I do see the boot animation but it never stops, I'm forever stuck with the Google-G and the progress bar below it. Has anyone else managed to install the Pixel Experience rom on the Mi 8 Pro? If yes, did you follow the guide here or did you do something else?
Also, in your initial post you write that we should wipe the system in TWRP but as far as I can tell GSI roms need you to wipe data, cache and dalvik cache but not the system partition (if you do it, you also don't get asked for your PIN code in TWRP any more, which - as you said - indicates that something went wrong).
Did you install a particular version of the Pixel Experience rom? Maybe that might be part of my issue?
I have try many times installing it. Didn't manage to boot it up.
Finally, tested with Miroom ROM as base then flash the system.img manage to boot up.
Don't know why it didn't boot but at lease any one who have issue booting may want to try using Miroom rom as base.
tllim73 said:
I have try many times installing it. Didn't manage to boot it up.
Finally, tested with Miroom ROM as base then flash the system.img manage to boot up.
Don't know why it didn't boot but at lease any one who have issue booting may want to try using Miroom rom as base.
Click to expand...
Click to collapse
What did you do to install miroom? I've been trying to install it and it just stays on the boot screen. The only non-official from I've been able to install and boot is the unofficial LineageOS rom by fenix-UK.
eremeya said:
What did you do to install miroom? I've been trying to install it and it just stays on the boot screen. The only non-official from I've been able to install and boot is the unofficial LineageOS rom by fenix-UK.
Click to expand...
Click to collapse
I install it using twrp 3.3.0 version. Build 0503. But before that I have install the stock rom goble stable version 10.3.5.0. update FW & Vendor using the same twrp.
tllim73 said:
I install it using twrp 3.3.0 version. Build 0503. But before that I have install the stock rom goble stable version 10.3.5.0. update FW & Vendor using the same twrp.
Click to expand...
Click to collapse
Thanks.
Is your phone a Chinese version or EU version? Were you able to root global stock rom?
eremeya said:
Thanks.
Is your phone a Chinese version or EU version? Were you able to root global stock rom?
Click to expand...
Click to collapse
Hi, I am using a Chinese version. But once you unlock it you will be able to flash any version with the twrp.
I try rooting it with magisk but unable to boot up. That's why I turn to Miroom Rom. They have done something which can boot it up.
tllim73 said:
Hi, I am using a Chinese version. But once you unlock it you will be able to flash any version with the twrp.
Click to expand...
Click to collapse
I'm also using the Chinese version but no matter what I try I cannot root the global version of the rom. I can root the Chinese version fine.
eremeya said:
I'm also using the Chinese version but no matter what I try I cannot root the global version of the rom. I can root the Chinese version fine.
Click to expand...
Click to collapse
Might be the developer version is only for the Chinese Rom. Anyway I am happy now running with GSI Rom.
eremeya said:
I'm also using the Chinese version but no matter what I try I cannot root the global version of the rom. I can root the Chinese version fine.
Click to expand...
Click to collapse
What version of TWRP are you using?
Well, i have this problem. I'm on xperience pie (64 bits) and i have a problem with magisk (couldn't pass safety net) . I found a solution, but i had to change fingerprint, so i did it. Now, when i checked, i'm with a huawei fingerprint.
So, my question is if i will have problems when i'll go back to stock ROM. I don't want to brick my phone.
Thanks in advance.
No you don't gonan have any problem, fingerprint is in system, if you back to stock rom, the adb install procedure will clean system partition replace with motorola system images, and magisk is systemless, so this means, that not a real replacement of fingerprint and just a "mask"(a little more complicated than this, but just simplifying for you) that aplied on boot, you can test disabling the module of fingerprint and check the fingerprint that is implemented in xpe, and if you install again you gonna see the fingerprint of the module, even if you use this module on stock rom nothings gonna change permanently, and uninstalling module the stock fingerprint gonna back
jst98 said:
No you don't gonan have any problem, fingerprint is in system, if you back to stock rom, the adb install procedure will clean system partition replace with motorola system images, and magisk is systemless, so this means, that not a real replacement of fingerprint and just a "mask"(a little more complicated than this, but just simplifying for you) that aplied on boot, you can test disabling the module of fingerprint and check the fingerprint that is implemented in xpe, and if you install again you gonna see the fingerprint of the module, even if you use this module on stock rom nothings gonna change permanently, and uninstalling module the stock fingerprint gonna back
Click to expand...
Click to collapse
Thanks man. I did it. I'm back on stock oreo.
I need Global firmware. The version number is KLE2005121OS00MP1.Or other newer versions.
If you have any, you can send me a private message.
Thank you!
johnny886 said:
I need Global firmware. The version number is KLE2005121OS00MP1.Or other newer versions.
If you have any, you can send me a private message,
I will make it into an unbrick tool, which can repair the phone in 9008 mode.
And I will announce the method of unlocking the bootloader for Black Shark 3 and Black Shark 3Pro.
It is free and does not require any payment.
Thank you!
Click to expand...
Click to collapse
i have this phone on my hand the same version what you are looking for, but i dont know how to read the firmware or read dump etc.. sense this phone is new
do you have any other tool to back up the firmware for this device?
renskie said:
i have this phone on my hand the same version what you are looking for, but i dont know how to read the firmware or read dump etc.. sense this phone is new
do you have any other tool to back up the firmware for this device?
Click to expand...
Click to collapse
He cant do none of this he just want the firmware to sold it to peoples
bouyhy01 said:
He cant do none of this he just want the firmware to sold it to peoples
Click to expand...
Click to collapse
I released it for free. You can read my post. ROG2 and redmagic5G files, you don’t know the trouble, don’t talk nonsense.
johnny886 said:
I released it for free. You can read my post. ROG2 and redmagic5G files, you don’t know the trouble, don’t talk nonsense.
Click to expand...
Click to collapse
Redmagic and rog 2 firmwares are all over the net and the oems provides everythings so your argument is pointless
bouyhy01 said:
Redmagic and rog 2 firmwares are all over the net and the oems provides everythings so your argument is pointless
Click to expand...
Click to collapse
sb, what I publish for free is the unbrick tool. Is there any use not you alone
johnny886 said:
sb, what I publish for free is the unbrick tool. Is there any use not you alone
Click to expand...
Click to collapse
you mean edl files firehose etc
KLE2005121OS00MP1
this is incremental ota
how to get full of it
if u dont hav rooted bs3 phone :v
If u want to hav firmware
Lets share your loader firehose file
I will get full firmware for u
Need BS3S global rom. im using CN rom KLEN2011100CN00MQ3 with joyui12. As i know latest global rom for BS3S version is KLEN2010281OS00MP3 WITH JOYUI11. want to convert to global. any have global rom please share it here. thanks
xSasori said:
Need BS3S global rom. im using CN rom KLEN2011100CN00MQ3 with joyui12. As i know latest global rom for BS3S version is KLEN2010281OS00MP3 WITH JOYUI11. want to convert to global. any have global rom please share it here. thanks
Click to expand...
Click to collapse
There is no global ROM for 3s. You have to wait until there is a global version of the phone available and someone shares the link to Blackshark servers/dumps it.
in the meantime check out chinese firmware https://forum.xda-developers.com/t/...l-and-up-to-date-china-rom-downloads.4197717/
If you talk english its fine. You can also install magisk and use a system app disabler/"remover" so you can at least disable all the trash from china.
If you are uncomfortable with an English UI you could try installing a GSI-image (e.g. Lineage / MIUI / etc), which should basically work (just make sure to backup everything first and unlock bootloader in case sth goes wrong):
1. boot TWRP and wipe everything
2. install KLEN2011100CN00MQ3 from my thread
3. Download an A/B GSI ROM (refered to gsi.img later on)
Now there are different methods:
1. reboot to fastboot, "fastboot erase system" if it does not work try "fastboot reboot fastboot" and try to erase system again. if this does not work try "fastboot reboot fastbootd" and erase system (if it was successful stay in the mode it worked and go to 2., if you did not succeed with any, reboot to bootloader and go to 2 as well)
2. Flash GSI by either (you have to try what works):
2.1 fastboot flash system gsi.img, check if boots
2.2 fastboot flash super gsi.img, check if boots
2.3 fastboot reboot fastboot and then try 2.1 and 2.2, check if boots
2.4 fastboot reboot fastbootd and then try 2.1 and 2.2, check if boots
3. Report back if it worked (Exact steps so i can reproduce what you did and which GSI u used) if sth bugs you can send me a logcat (PM!), what the problem is (e.g. WLAN not working) and i can check if there is an easy solution.
It would be great to see if users stuck on china rom can just install a GSI and have full Languages.
wertus33333 said:
There is no global ROM for 3s. You have to wait until there is a global version of the phone available and someone shares the link to Blackshark servers/dumps it.
in the meantime check out chinese firmware https://forum.xda-developers.com/t/...l-and-up-to-date-china-rom-downloads.4197717/
If you talk english its fine. You can also install magisk and use a system app disabler/"remover" so you can at least disable all the trash from china.
If you are uncomfortable with an English UI you could try installing a GSI-image (e.g. Lineage / MIUI / etc), which should basically work (just make sure to backup everything first and unlock bootloader in case sth goes wrong):
1. boot TWRP and wipe everything
2. install KLEN2011100CN00MQ3 from my thread
3. Download an A/B GSI ROM (refered to gsi.img later on)
Now there are different methods:
1. reboot to fastboot, "fastboot erase system" if it does not work try "fastboot reboot fastboot" and try to erase system again. if this does not work try "fastboot reboot fastbootd" and erase system (if it was successful stay in the mode it worked and go to 2., if you did not succeed with any, reboot to bootloader and go to 2 as well)
2. Flash GSI by either (you have to try what works):
2.1 fastboot flash system gsi.img, check if boots
2.2 fastboot flash super gsi.img, check if boots
2.3 fastboot reboot fastboot and then try 2.1 and 2.2, check if boots
2.4 fastboot reboot fastbootd and then try 2.1 and 2.2, check if boots
3. Report back if it worked (Exact steps so i can reproduce what you did and which GSI u used) if sth bugs you can send me a logcat (PM!), what the problem is (e.g. WLAN not working) and i can check if there is an easy solution.
It would be great to see if users stuck on china rom can just install a GSI and have full Languages.
Click to expand...
Click to collapse
Successfully flashed on my first try
Kraya333 said:
Successfully flashed on my first try
Click to expand...
Click to collapse
Nice! Thanks a lot for trying now we'd have to try if the native shark apps (like rgb control/power overlay) work under lineage
wertus33333 said:
Nice! Thanks a lot for trying now we'd have to try if the native shark apps (like rgb control/power overlay) work under lineage
Click to expand...
Click to collapse
I followed the instructions of Redmi K30 Pro and also used its vbmeta.img because apparently you can't boot into non MIUI(JOYUI in this case) without flashing it.
Reboot to bootloader:
adb reboot bootloader
Flash vbmeta with
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
If using wzsx150's unofficial TWRP, flash stock recovery
fastboot flash recovery recovery.img
Reboot to fastbootd
fastboot reboot fastboot
Flash system with
fastboot flash system system.img
Wipe data
fastboot -w
Reboot phone
fastboot reboot
Home
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
I got the vbmeta.img here https://flashxiaomi.com/download-and-install-twrp-on-xiaomi-redmi-k30-pro/
I skipped flashing stock recovery cause I didn't flash twrp in my recovery. I don't know what will happen tho if flashing gsi with twrp installed.
I flashed GSI AOSP 10.0 v220 and v222 and both boot successfully.
Wifi, Bluetooth, and Camera seems working. Unfortunately I can't test Data, Messages and Call because I don't have any signal in my area.
The ROM was pretty smooth overall and they even have 120/90hz supported. Only reason I won't use the ROM as daily driver is because the rgb is always lighting green. Can't seem to find in the settings to turn it off, and even sideloaded the Light Effect app from the stock rom and it goes not responsive every time I open it.
Also, I got bootlooped after pressing Securize which was supposed to unroot superuser that came with the gsi ROM. I did get the phone back to revert to stock ROM.
wertus33333 said:
Nice! Thanks a lot for trying now we'd have to try if the native shark apps (like rgb control/power overlay) work under lineage
Click to expand...
Click to collapse
Also do you know any gsi ROM with working desktop mode? I can't wait for xiaomi to develop one.
Kraya333 said:
I followed the instructions of Redmi K30 Pro and also used its vbmeta.img because apparently you can't boot into non MIUI(JOYUI in this case) without flashing it.
Reboot to bootloader:
adb reboot bootloader
Flash vbmeta with
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
If using wzsx150's unofficial TWRP, flash stock recovery
fastboot flash recovery recovery.img
Reboot to fastbootd
fastboot reboot fastboot
Flash system with
fastboot flash system system.img
Wipe data
fastboot -w
Reboot phone
fastboot reboot
Home
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
I got the vbmeta.img here https://flashxiaomi.com/download-and-install-twrp-on-xiaomi-redmi-k30-pro/
I skipped flashing stock recovery cause I didn't flash twrp in my recovery. I don't know what will happen tho if flashing gsi with twrp installed.
I flashed GSI AOSP 10.0 v220 and v222 and both boot successfully.
Wifi, Bluetooth, and Camera seems working. Unfortunately I can't test Data, Messages and Call because I don't have any signal in my area.
The ROM was pretty smooth overall and they even have 120/90hz supported. Only reason I won't use the ROM as daily driver is because the rgb is always lighting green. Can't seem to find in the settings to turn it off, and even sideloaded the Light Effect app from the stock rom and it goes not responsive every time I open it.
Also, I got bootlooped after pressing Securize which was supposed to unroot superuser that came with the gsi ROM. I did get the phone back to revert to stock ROM.
Click to expand...
Click to collapse
Thanks a lot for the detailed instructions . Can i use your research to create a thread for gsi's in the future? (i will mention you ofc). There should be some option for notification lights somewhere in settings, does sth change if you change that?
i think gsi's only work with root.
for desktop mode, i think lineage had such a function in developer options once (no idea if its still there) or you could use linux4android and emulate a full linux (but you can only share your phone display that way--> not possible to use phone normally while using linux. Maybe by simulating a second screen and forcing the vnc viewer to this screen? but you would have to do some research concerning this)
johnny886 said:
I need Global firmware. The version number is KLE2005121OS00MP1.Or other newer versions.
If you have any, you can send me a private message.
Thank you!
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/black-shark-3-global-rom-support-ota-update.4203471/
You r wellcome
This mp3
Kraya333 said:
Also do you know any gsi ROM with working desktop mode? I can't wait for xiaomi to develop one.
Click to expand...
Click to collapse
android 10 has desktop mode by default you just have to activate it
see https://www.xda-developers.com/make-android-10-desktop-mode-useful/
wertus33333 said:
Thanks a lot for the detailed instructions . Can i use your research to create a thread for gsi's in the future? (i will mention you ofc). There should be some option for notification lights somewhere in settings, does sth change if you change that?
i think gsi's only work with root.
for desktop mode, i think lineage had such a function in developer options once (no idea if its still there) or you could use linux4android and emulate a full linux (but you can only share your phone display that way--> not possible to use phone normally while using linux. Maybe by simulating a second screen and forcing the vnc viewer to this screen? but you would have to do some research concerning this)
Click to expand...
Click to collapse
I tried the notification lights in the settings and it didn't work. I flashed back the gsi rom earlier in the morning and used it for a day and I discovered that call volume isn't working. Even when I slide it down to basically 0 call can still be heard at maximum volume. And there is an option on developer settings for desktop mode but there was only black screen on the monitor even after turning on the freeform and resizable settings, the same on joyui rom(there's also desktop mode in settings on joyui). Also audio is broken from the start, you have to disable audio effects on treble settings.
For going back to joyui rom restoring it from backup isn't possible(at least in my case it didn't boot up). You'd have to flash the firmware back. I flashed mine back to stock rom just now, and I just remembered I didn't get to test the shark space bar and what would happen if I slide it on.
And yeah, you can use my research for making the thread. I'm wondering why there's no one talking about flashing gsi on bs3 till now.
Kraya333 said:
I tried the notification lights in the settings and it didn't work. I flashed back the gsi rom earlier in the morning and used it for a day and I discovered that call volume isn't working. Even when I slide it down to basically 0 call can still be heard at maximum volume. And there is an option on developer settings for desktop mode but there was only black screen on the monitor even after turning on the freeform and resizable settings, the same on joyui rom(there's also desktop mode in settings on joyui). Also audio is broken from the start, you have to disable audio effects on treble settings.
For going back to joyui rom restoring it from backup isn't possible(at least in my case it didn't boot up). You'd have to flash the firmware back. I flashed mine back to stock rom just now, and I just remembered I didn't get to test the shark space bar and what would happen if I slide it on.
And yeah, you can use my research for making the thread. I'm wondering why there's no one talking about flashing gsi on bs3 till now.
Click to expand...
Click to collapse
If you try that again you can try getting a logcat and send it to me so i can see what the problems are. Maybe you could try any xiaomi optimized gsi. if i find the time i'll do some work over christmas.
maybe u have to reflash the original vbmeta after twrp restore to make it boot.
I think noone talks about gsi's bcs its not officially supported by xiaomi (u cant officially unlock bl) and xiaomi does not necessarily build after googles guidelines for compatibility...
This tread was discontined as far as I dropped support of PixelPlusUI Project.
Thanks to all users and supporters who was Interested to project.
Future Development for Poco F3 will be according to own new project - VoidUI Project
Github:
Android 12.1 VoidUI Project
Android 13.0 VoidUI Project (Beta, will be reworked)
Telegram Links according to Future VoidUI Development:
Monthly Stable Releases Telegram Chat
Weeklies / Development Telegram Chat
Regards,
Ivan Martynov
Thanks!
Thanks. Currently I'm using pixel experience custom ROM Android 11. If I install it, can I root my device using nesberry TWRP ? Does this ROM support Optimus drunk kernel?
Just a quick note I understand you want to save time and copy and paste the opening page but everyday this phone gets a dozen starting new threads for simple questions and the reason that is is because there's not good information out there. You guys have to quit saying boot into recovery and make a backup and flash rom. We can make a backup kinda but you can't restore it so it's a waste of time. But new users see that and maybe a backup goes through on USB C drive and they find out it won't restore. Really it should read take any photos or data and put it to hard drive on PC or USB otg. Make sure to have PC with miflash and miui rom for Poco F3 downloaded and available in case. Than when you do flash rom with Twrp, orange fox, whatever be prepared to get tons of errors and unable to mount errors and no OS error and reboot and see what happens. No where does anyone actually lay out what people should do or expect to happen. Also 0mb twrp data showing refresh sizes in twrp backups option
Android Auto and Face Recognition works?
Nice ROM.
Beautiful Rom but payment by card is not possible.
Gonna Try
Fixup Build has been pushed. Update to Latest
One of the best AOSP based ROMs that I would recommend for this phone.
LilBlinx said:
One of the best AOSP based ROMs that I would recommend for this phone.
Click to expand...
Click to collapse
Is it pretty stable and battery life good screen on and off?
I made a dirty flash from pixel extended and all ok. Waiting for more customization features. Great job!
One of the best, clean and close to stock pixel rom, highly recommended
JettaPlus said:
I made a dirty flash from pixel extended and all ok. Waiting for more customization features. Great job!
Click to expand...
Click to collapse
Any difference you found? Asking because I am on PEX and thinking out switching to this if it has more features and options to tweak around.
hi
do i need to root poco f3
if yes any link how
im on RKHEUXM
thanks
Facebook is very slow reopen.
I've tried multiple flash from MIUI 12.5 (A11) to this rom A12 onto a Poco F3 but I don't get how to get it working ?
I've:
- Rebooted into TWRP Vasi Recovery
- Make TWRP permanent in advanced tab (install recovery ramdisk with same TWRP img)
- Flash ROM (with or without twrp inject)
- Wipe Data (or not)
No OS is found and I cannot even see the storage until I flash again in fastboot mode with MIUI 12.5. What do I need to do ? It seems to be related to A12 since A11 version of Pixel UI is working fine (nevermind, it's going into bootloop) but I didn't find any informations about different steps to take.
FYI, it says decryption has been successful, always switch to inactive slot B and always getting those errors:
- Error opening : '/data/recovery/.version' (No such file or directory)
- E:backup /tmp/repackorig/
variamus said:
I've tried multiple flash from MIUI 12.5 (A11) to this rom A12 onto a Poco F3 but I don't get how to get it working ?
I've:
- Rebooted into TWRP Vasi Recovery
- Make TWRP permanent in advanced tab (install recovery ramdisk with same TWRP img)
- Flash ROM (with or without twrp inject)
- Wipe Data (or not)
No OS is found and I cannot even see the storage until I flash again in fastboot mode with MIUI 12.5. What do I need to do ? It seems to be related to A12 since A11 version of Pixel UI is working fine (nevermind, it's going into bootloop) but I didn't find any informations about different steps to take.
FYI, it says decryption has been successful, always switch to inactive slot B and always getting those errors:
- Error opening : '/data/recovery/.version' (No such file or directory)
- E:backup /tmp/repackorig/
Click to expand...
Click to collapse
Even if it says that no OS is found, reboot to OS. It will boot from the other A or B partition
LilBlinx said:
Even if it says that no OS is found, reboot to OS. It will boot from the other A or B partition
Click to expand...
Click to collapse
It won't, it just goes back to recovery without any storage
variamus said:
It won't, it just goes back to recovery without any storage
Click to expand...
Click to collapse
Flash stock miui and then flash custom roms using twrp