Related
Hi guys,
I'm trying to learn something about Android, GIT and Linux, and best way to do so is getting my hands dirty.
As a Slim user I'm playing a bit with with SlimROMs, and since they dropped support for our device, I'm sharing with you my builds.
FAQs:
SlimLP 5.1:
Q: Is SlimLP stable enough for daily use?
A: If you don't mind the issues reported bellow, yeah, it is.
Q: Can I use another kernel?
A: Yes, of course. Just be sure it includes new PVR drivers.
Q: Are RRO Overlays supported?
A: Yes.
Q: Is F2FS supported?
A: Yes, you can use F2FS as FS for data/ and cache/
Q: Is Xposed working on this ROM?
A: Yes.
SlimKAT:
Q: Is this SlimKAT build different from OFFICIAL?
A: It's just SlimKAT "stock", you will notice no difference between this and official. It's built with Linaro and has some optimizations under the hood.
Q: Is it really faster/smoother?
A: I would say YES, but I can't guarantee over placebo effect, so I will just say that I've got a slightly better average score [~7-8%] in Antutu Benchmarks, for what it's worth. Let me know guys.
Q: Is F2FS supported? A: Nope. You have to use this tool and a kernel that supports F2FS.
Q: Will you...
... update this ROM? A: r2 is already up to date with official.
... publish a changelog? A: Yes. See next post.
... push more tweaks and switch to new PVR? A: I hope so. I would like to say "I will update ALL THE THINGS" but as an engineering student I can't really promise I will.
Q: What kind of optimizations? A:
SlimKAT is built with Linaro 4.8.3 [2014.04]. -O3, LTO, C++11 and strict aliasing are enabled.
Built-in Kernel is compiled with with Linaro 4.9.3 [2014.11] optimized for ARM Cortex-A9. Anyway, it is built from official source and has no enhancement, so I highly recommend you use a custom kernel for better performances and battery life.
Thanks:
Really HUGE thanks to @MWisBest, @Ziyan and to everyone who is working on SlimROMs.
Disclaimer:
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or the current economic crisis caused by you following these directions.
* YOU are choosing to make these modificiations, and if you point your
* finger at me for messing up your device, I will laugh at you.
*/
Please, make a Nandroid backup of ALL your partitions (system, data, boot, EFS).
These zips work for me, but you know Murphy's law is always ready to strike.
Known issues: If you find more, please, let me know.
SlimLP: [what is NOT working yet - the most are common to all Lollipop (5.0 and 5.1) based ROMs]
There's still a small band on the bottom of recorded videos;
Do you have an issue with your device? Here's How to Report an Issue or a Bug:
Please, before reporting any issues take these few steps. Many of the bugs are NOT caused by the ROM itself.
Are you sure you installed the right Gapps package? If not, flash SlimLP one.
Have you recently installed (or updated) any app or Xposed module? If so, uninstall or disable it.
Disable Xposed.
Are you using stock kernel?
Have you dirty flashed over your previous installation?
5.1 requires a factory reset if coming from 5.0 or older.
Still got the issue? Take a logcat and a dmesg and attach them to your report.
Screenshots are welcome if you think they might help.
Keep in mind that "MY GNEX IS LAGGY!!!" is NOT a useful bug report.
Downloads: Be sure you have read the previous part of the post!
SlimLP Builds [5.1.1]
SlimLP_maguro-5.1.1-BUILD_12-25.zip
GAPPS: use SlimLP official gapps mini package.
Older builds:
SlimLP:
SlimLP_maguro-5.0.2-LOLLIPOP_BUILD_9v2.zip
SlimLP_maguro-5.0.2-LOLLIPOP_BUILD_9.zip
SlimLP_maguro-5.0.2-LOLLIPOP_BUILD_8.zip
SlimLP_maguro-5.0.2-LOLLIPOP_BUILD_7v2.zip
SlimLP_maguro-5.0.2-LOLLIPOP_BUILD_7.zip
SlimLP_maguro-5.0.2-LOLLIPOP_TEST_BUILD6.zip
SlimLP_maguro-5.0.2-LOLLIPOP_TEST_BUILD5.zip
MD5: 2D4D297B4C523F770D529DA6FA267895
SlimLP_maguro-5.0.2-LOLLIPOP_TEST_BUILD4.zip
MD5: 15FCC0974A56D3AD281D9EAA1BAEB9D0
SlimLP_maguro-5.0.2-LOLLIPOP_TEST_BUILD3.zip
MD5: B12B6865F8C801F453CB015C20E35BCA
SlimLP_maguro-5.0.2-LOLLIPOP_TEST_BUILD2.zip
MD5: FE0387E5D2B2C0FB5319076D94801736
SlimLP_maguro-5.0.2-LOLLIPOP_TEST_BUILD1.zip
MD5: CD11529BD4490B7D093D04B458C48EAE
SlimKAT:
slim_maguro-4.4.4-9.0-BETA_v1_UNOFFICIAL.zip
MD5: 4c746a31678c99f9f510c8a41e2dbcbc
slim_maguro-4.4.4-9.0_UNOFFICIAL_r2.zip
MD5: ED3273B360D655CB496D7350B8792397
GAPPS: use SlimKAT official gapps.
XDA:DevDB Information
SlimLP (maguro), ROM for the Samsung Galaxy Nexus
Contributors
theBlackEnd
Source Code: https://github.com/eMarco/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: SlimLP
Version Information
Status: Beta
Current Beta Version: 0.12
Created 2014-12-22
Last Updated 2015-12-25
Reserved
Changelog:
SlimLP 5.1:
TestBuild 1 >> TestBuild 2
- Some fixes here and there;
- 5.1.1 r3 has been merged
- SlimPIE is back;
TestBuild 2 >> 06/26:
- SlimRecents, Blacklist and Expanded Desktop are back;
- Cursor buttons in navigation bar while typing are back too (Settings -> Navigation);
- Fix to camera crashing while taking videos with WhatsApp\Snapchat\... built in camera app;
- Fix mic mute during call (thanks to @MWisBest);
- Bootanimation is now smooth;
- Synced with SlimROMs repos (alpha 0.4);
06/26 >> 08/07:
- Fixed sound when waking the device through Volume keys;
- Dialer vibration is back (vibrate when call is answered, etc)
- Bump to Beta 0.3 (based on Android 5.1.1 r9);
- Various fixes and translations updates;
08/07 >> 08/11:
- Fix for some apps FC;
08/11 >> 09/13:
- LiveDisplay and ColorCalibration have been fixed;
- Kernel: switch back to Boype's RAM Timings;
- Synced with SlimLP Beta 0.7 (Android 5.1.1 r16);
- Flip to Mute/Reject Call;
- CellularTile: Long-click triggers detail view instead;
- Show icon of the app associated to Toast notification;
- ResolverActivity: reduce elevation to make it flat
- More;
09/13 >> 10/31:
- BFQ IO Scheduler has been added (CFQ is still default though);
- Vibration intensity can be set;
- Synced with SlimLP Beta 0.10 (based on Android 5.1.1 r20);
- New Messaging App;
- Lock Pattern has been improved;
- A few fixes and improvements;
10/31 >> 12/25:
- Synced with SlimLP Beta 0.12 (Android 5.1.1 r30);
- A few fixes and improvements;
SlimKAT:
OFFICIAL >> r1
- built using Linaro 4.7.4 [2014.06-1~dev] (ROM), Linaro 4.9.3 [2014.11] (Kernel);
- Compilation flags: O3, C++11, strict aliasing;
- Minor changes;
r1 >> r2
- ROM is now built with Linaro 4.8.3 [2014.04];
- LTO is now enabled.
- Video playback has been fixed;
- Video recording now should work properly, too;
- Some enhancements to bionic (check my github);
- Minor changes;
SlimLP 5.0:
Initial revision:
- SlimLP on maguro;
- New PVR;
Test Build 1 >> TB 2:
- Toolchains: same as SlimKAT, check first post;
- Built-in kernel (based on @Ziyan's OMAP kernel) is now working;
- Stock camera is now saving pictures (YEEEEEEEEEEEEE!), unless you switch flashlight toggle on in notification drawer. If so, you probably need to reboot and\or clear camera cache in Settings > Apps > Camera;
- Synced up with SlimLP repos;
TB 2 >> TB 3:
- Improvements to the kernel, but you won't notice them unless you like your phone to be dead quiet; :silly:
- Photos should not look yellowish anymore. [NON-PIE support has been enabled (temporarily) to let fRom download camera calibration files];
- Long SMS sending should be fixed; (thanks to @Ziyan)
- Synced up with official repos;
- Minor changes;
TB 3 >> TB 4:
- Audio is now working properly and so is video recording, you won't need an external kernel;
- Kernel is now built with GCC 4.9.3 [12.14] Optimized for Cortex A9;
- Merged lastest MWisBest's changes to camera, I guess it should be a bit more stable now;
TB 4 >> TB 5:
- Torch tile is now working;
- ScreenRecord should be fixed;
- Video playback works fine on stock gallery apps;
TB 5 >> TB 6:
- F2FS support has been added (data and cache);
- New open-source bin to get camera calibration file (thanks to Ziyan), non-PIE support has been disabled;
- Built with SaberMod 4.8.5 [01.15]. C++11, -O3 and strict aliasing have been enabled (thanks to MWisBest);
- Synced up with official repos;
TB 6 >> Build 7:
- Enabled F2FS kernel support;
- Switched from SELinux Permissive to Enforcing (thanks to @freshgiammi);
- Darkened UI a bit (Dark Material) [boot to reduce screen burn-in, notifications, powermenu] (thanks to @ezio84);
- Added RRO Themes support;
- Some Updates to RIL [long text sending fix, ...];
- Brought back some audio changes to the kernel. Following MWisBest, this will allow bsmitty83 to build just one version of his kernel;
- Added pngquant PNG compression to lower ROM zip size;
- Synced up with official, minor changes;
Build 7 >> 7v2
- Built-in Superuser is now working;
- SettingsUI themed Dark Material, too;
- Tuned Low Memory Killer values. Thanks to Ziyan;
Build 7v2 >> 8:
- Workaround for Google Play Services FC. You need to wipe /system before updating;
- Revert Dark Material UI;
- Added full RRO Themes support;
- Minor changes;
Build 8 >> 9:
- Switch from JEMalloc to DLMalloc (memory allocation);
- Built-in ART now includes changes needed by XPosed (*);
- Recents lag fix;
- Some fixes here and there;
- Synced up with SlimROMs repos (improvements, updates to translations\built-in apps, ...);
Build 9 >> 9v2:
- Fix bootloop issues on VYL00M;
9v2 >> 10:
- XPosed updates to ART;
- Revert to old working controller for headset buttons;
- Netflix and other DRM using apps should work fine now; [TBC]
- OpenGL ES 2.0 support has been brought back;
- New Install App interface (more details, comparison between current and new permissions and more);
- Some improvements and fixes here and there (RRO, memory management, ...);
- Switch to new Camera\DOMX [Hashcode's omap4-next];
Reserved
Very smooth and seems to be very stable. Thank you for your ROM. But the scale is very small. How to make bigger ?
I want lollipop. please.
KATAMAPAH said:
Very smooth and seems to be very stable. Thank you for your ROM. But the scale is very small. How to make bigger ?
Click to expand...
Click to collapse
Change dpi. Use "prop editor" to do that
Sent from my Nexus 5 using XDA Free mobile app
Hey guys, I'm uploading r2 right now.
I'm sorry it took so long but I had to fix some bugs and each one required at least one clean build.
I tried to build with SaberMod 4.8.5, I got slightly better performances but had sudden reboots enabling WiFi, so I had to revert to Linaro 4.8.3.
LinkTimeOptimization is now enabled (for real). Video playback is fine, video recording should, too.
Changelog is now available in post #2.
Is Camera App Working
theBlackEnd said:
Hey guys, I'm uploading r2 right now.
I'm sorry it took so long but I had to fix some bugs and each one required at least one clean build.
I tried to build with SaberMod 4.8.5, I got slightly better performances but had sudden reboots enabling WiFi, so I had to revert to Linaro 4.8.3.
LinkTimeOptimization is now enabled (for real). Video playback is fine, video recording should, too.
Changelog is now available in post #2.
Click to expand...
Click to collapse
CM 12 and FML Roms does not have the Camera App working and there is bug in charging the mobile when its offline. Are these bugs fixed in this ROM? Just asking as I do not see any open bugs in the description.
Thanks,
fearlessaryan
fearlessaryan said:
CM 12 and FML Roms does not have the Camera App working and there is bug in charging the mobile when its offline. Are these bugs fixed in this ROM? Just asking as I do not see any open bugs in the description.
Thanks,
fearlessaryan
Click to expand...
Click to collapse
This ROM is still KitKat based and doesn't use new GPU drivers, so yeah, camera and offline charging are working.
CM12 and FML are based on Lollipop instead.
torch
Thank you for this amazing work.
SlimKat 9.0 the final release for kitkat is out, when will you work on it?
please don't forget to add the torch tile in quicksettings.
thanks
Egyoneman said:
Thank you for this amazing work.
SlimKat 9.0 the final release for kitkat is out, when will you work on it?
please don't forget to add the torch tile in quicksettings.
thanks
Click to expand...
Click to collapse
Everything should be already up to date since r2. I'll let you know.
I forgot to re-add torch, my bad. :|
Atm I'm working on Lollipop, I got it booting right now (you see my avatar? well, that's an actual picture of me) using @bsmitty83's FML beta-3 kernel.
The one I'm compiling won't work. I've got several logs, I hope I'll figure out what's wrong with it.
Audio is working fine, data too (on edge, I can't test HSDPA atm as I've got a very weak signal at my home), Camera2 doesn't save any picture, ...
BUT HEY, IT'S SLIMLP ON MAGURO!
Thanks again to @MWisBest, @Ziyan and @freshgiammi.
----- Edit
I heard you like test builds, so I'm uploading this one. I have to study for my exams and I don't think I'll work on it anymore for today.
Is this Rom EXT4 or F2FS or Both??
subabaduba said:
Is this Rom EXT4 or F2FS or Both??
Click to expand...
Click to collapse
Since it is using @bsmitty's kernel.. It supports both ext4 and f2fs
Sent from my AOSP on Galaxy Nexus using XDA Free mobile app
subabaduba said:
Is this Rom EXT4 or F2FS or Both??
Click to expand...
Click to collapse
rajputrajat said:
Since it is using @bsmitty's kernel.. It supports both ext4 and f2fs
Click to expand...
Click to collapse
SlimLP should, but SlimKAT r2 doesn't support F2FS, you have to use poo706's tool. I'll add f2fs support in r3, I think.
Edit:
Errata corrige, I didn't add f2fs support in device tree. You'll have to wait for next builds. However, keep in mind that adding f2fs support is not my priority. I have to get kernel working and try to help with camera.
New build is up.
Changelog:
- Built-in kernel is now working. Overclock is not enabled.
You can use another kernel, of course. Just be sure the one you're going to flash includes new PVR drivers (eg bsmitty83's betas).
- Stock camera is now saving pictures (YEEEEEEEEEEEEE!), unless you switch flashlight toggle on in notification drawer. If so, you probably need to reboot and\or clear camera cache in Settings > Apps > Camera;
- Now using same toolchains as SlimKAT, check first post;
- Synced up with SlimLP repos;
What's not working yet:
- Video recording and video playback.
- Offline charging
- If you boot while in airplane mode you will be prompted to enter your PIN and won't be able to unlock your SIM. You should manage to disable airplane mode before being prompted for it.
- More common to all LP builds and not. If you find more, please, let me know.
Edit: I made a mess with download links, please check you're downloading test build 2.
theBlackEnd said:
New build is up.
Changelog:
- Built-in kernel is now working. Overclock is not enabled.
You can use another kernel, of course. Just be sure the one you're going to flash includes new PVR drivers (eg bsmitty83's betas).
- Stock camera is now saving pictures (YEEEEEEEEEEEEE!), unless you switch flashlight toggle on in notification drawer. If so, you probably need to reboot and\or clear camera cache in Settings > Apps > Camera;
- Now using same toolchains as SlimKAT, check first post;
- Synced up with SlimLP repos;
What's not working yet:
- Video recording and video playback.
- Offline charging
- If you boot while in airplane mode you will be prompted to enter your PIN and won't be able to unlock your SIM. You should manage to disable airplane mode before being prompted for it.
- More common to all LP builds and not. If you find more, please, let me know.
Click to expand...
Click to collapse
Is the camera quality same as the quality in slimkat 4.4.4 camera or it is still yellowish ??
and flashlight thing i dint get it can u explain me again ??
thank u
iddu.daragah said:
Is the camera quality same as the quality in slimkat 4.4.4 camera or it is still yellowish ??
and flashlight thing i dint get it can u explain me again ??
thank u
Click to expand...
Click to collapse
I mean that flashlight toggle in notification drawer (check this gif) is not working and will break camera until reboot.
Flashlight is working in camera.
Some of the photos I took last night look slightly yellowish. I can't really say, I'm going out and I had to restore SlimKAT as I need everything working :/
You're welcome.
theBlackEnd said:
I mean that flashlight toggle in notification drawer (check this gif) is not working and will break camera until reboot.
Flashlight is working in camera.
Some of the photos I took last night look slightly yellowish. I can't really say, I'm going out and I had to restore SlimKAT as I need everything working :/
You're welcome.
Click to expand...
Click to collapse
So is it stable to use as a daily driver or camera will be soon fixed more ??
iddu.daragah said:
So is it stable to use as a daily driver or camera will be soon fixed more ??
Click to expand...
Click to collapse
Actually, these builds are not meant for daily use, but they're stable enough if you don't mind the issues in post #1. Make a full nandroid backup before flashing.
We're trying to get everything working, so yes, camera will get better, of course.
theBlackEnd said:
Actually, these builds are not meant for daily use, but they're stable enough if you don't mind the issues in post #1. Make a full nandroid backup before flashing.
We're trying to get everything working, so yes, camera will get better, of course.
Click to expand...
Click to collapse
No bootanimation ??? I am getting google logo with an unlocked bootloader sign.
Hello!
This is development thread of Ressurection Remix - Android 7.1.2 Marshmallow by NovaFusion.
Credits:
Macław
Thanks for support:
marcin1147
Meticulus
Huge thanks to Resurrection Remix / LineageOS team.
You can get it from http://novafusion.pl/.
Download is directly provided from our servers - it's fast, stable and fully resumable!
If you appreciate our work, please, use thanks button!
XDA:DevDB Information
Resurrection Remix / Android 7.1 for S3 Mini, ROM for the Samsung Galaxy S III Mini
Contributors
New Macław, New Macław
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Based On: Resurrection Remix
Version Information
Status: Stable
Current Stable Version: 20171220
Stable Release Date: 2017-12-20
Current Beta Version: 20170405
Beta Release Date: 2017-04-05
Created 2017-04-05
Last Updated 2017-12-20
Features:
RIL (phone/SMS/3G)
audio (both speakers/headphones/microphone)
Wi-fi
Bluetooth 4.0 with LE support A2DP
fully working GPS/Glonass/A-GPS with very fast and stable fix - only one Nougat for S3 Mini with fully working navigation!
sensors
compass
camera / camcorder including AF
video playing
2D/3D HW Acceleration
all native tethers (Wifi/BT/USB)
Google Play
CPU sleep mode
MTP
ADB
no tearing
tripple buffering
external storage
f2fs filesystem support
offline charging
all video playing support (including YouTube 480p)
Issues:
not known
20171220
RR sources update
removed unused media codecs introduced in last release
fixed phone app wakelock (battery improvement)
another try on wifi direct
huge RAM usage improvement
ODIN package update
20171117
RR sources update
device sources and patches made completely from a scratch
system is now completely fluid – no freezes, lags and etc.
reduced battery usage by RIL services
experimental support for Wifi Direct
experimental update of Wifi Drivers for better stability
fixed various issues with Phone functionality (incall issues, SIM card contacts managing etc)
much more which I don’t remember
ODIN package update
20170928
RR sources update
fixed issues with overheating CPU due to error loop with unsupported features in legacy blobs
battery life much improved
improved system smoothness
ODIN package update
20170822
RR sources update
another youtube playback improvements
resolved some issues with root permissions
system should be now less laggy while using custom themes
first part of BLN changes (not ready yet)
ODIN package update
20170804
RR sources update
much reduced battery usage on audio playback in background
better support for streaming apps, like YT, Spotify, Tidal etc.
minor cleanup
optimized system
ODIN package update
20170717
RR sources update
fixed download link
again fixed wifi autoconnection
better stability of wireless connections
full 5GHz wifi support
better performance for video playback
ODIN package update
20170716
RR sources update
again fixed wifi autoconnection
better stability of wireless connections
full 5GHz wifi support
better performance for video playback
ODIN package update
20170709
RR sources update
more improvements with battery drain
improvements with mobile signal
root should work correctly in more apps
ODIN package update
20170620
RR sources update
Bluetooth: A2DP music streaming in higher quality
Wifi: much improved stability
Wifi: better signal range
Wifi: better tether bandwidth
System: fixed compatibility with some apps, causing less issues and reducing battery drain
ODIN package update
20170605
RR sources update
fixed wifi auto connection
resolved issues with root which some users experienced on last release
improved smoothness of 480p YouTube videos
ODIN package update
20170529
RR sources update
fixed force 2G mode
fixed wifi auto connection – thanks ChronoMonochrome for inspiration
much improved wifi stability
ODIN package update
20170520
RR sources update
fixed Wifi/USB/BT tethering (thanks to ChronoMonochrome)
much improved Wifi stability
ODIN package update
20170516
RR sources update
milestone release
fixed focus in camera
switched to much better Camera app (Snap)
switched to opensource RIL – much faster boot, fully compatible with Nougat, causing overall system performance boost
much improved GPS signal, stability and fix time – working better than on any other ROM
fixed YouTube 480p video – working smooth
possibly fixed Instagram / Snapchat video issues
HWComposer updates for Nougat – now system is liquid smooth!
ODIN package update
20170504
RR sources update
fully working GPS / Glonass / AGPS navigation – no hacks, fully working even on “Device only” mode (it’s the only one Nougat ROM for S3 Mini with working GPS!)
milestone release
much improved system UI smoothness
ODIN package update
20170425
RR sources update
reduced system wakelocks for better battery life
fixed offline charging
more HW ui acceleration fixes
ODIN package update
20170417
RR sources update
fixed 1GHz bug (thanks ChronoMonochrome)
battery life is now simply great
much better performance
ODIN package update
20170416
RR sources update
updated to Android 7.1.2
fixed some compatibility issues with 3rd party apps
much faster boot
full HW acceleration
support for signature spoofing (on users request)
fixed issues with mounting external sd card
RIL (telephony) improvements
GPS fix improvements
ODIN package update
20170414
fixed stability of download server
fixed all issues with sticking on bootlogo
full f2fs support – /system, /data, /cache
prerooted – you don’t have to root device by yourself
fixed issues with ODIN packages unzip
huge stability improvements
/system default filesystem is f2fs for better performance
full GPU acceleration
much better performance – (look at animations right now)
ODIN package update
20170412
fixed boot on all S3 Mini’s revisions (still not support for I8200 – it’s different phone with different HW, only outside look is same)
updated Resurrection Remix sources
stability improvements
native videorecording support
ODIN package update
20170405
first release
All releases and Google Apps are available for download from:
http://novafusion.pl
Download is directly provided from our servers - it's fast, stable and fully resumable!
Sources: http://github.com/NovaFusion
New Macław said:
20170405
first release
Click to expand...
Click to collapse
Thank u so much Maclaw!
does it have OMS support? which version it is, 5.8.1 or 5.8.2?
New Macław said:
20170405
first release
Click to expand...
Click to collapse
Installed with twrp 2.8.0.0 stuck in Samsung logo. 6.0.1 wokrs. MD5 confirmed with independent pc
kurtn said:
Installed with twrp 2.8.0.0 stuck in Samsung logo. 6.0.1 wokrs. MD5 confirmed with independent pc
Click to expand...
Click to collapse
Could you please redownload release from same link? it seems my changes have some issues with other device revisions than mine.... but I hope now it's fine.
I also Installed with twrp 3.0.2-0 and stuck on samsung logo,,,,,,
brka35 said:
I also Installed with twrp 3.0.2-0 and stuck on samsung logo,,,,,,
Click to expand...
Click to collapse
When have you started the download?
i start download in 10:51 PM am in berlin time zone UTC +1:00
brka35 said:
i start download in 10:51 PM am in berlin time zone UTC +1:00
Click to expand...
Click to collapse
ok, my friend also has this issue. will fix it this week and release fixed package.
ok thank for your time and effort
I have done a clean installation from scratch with twrp 3.0.2.1 installing with the gapps and does not boot it stays in the samsung logo, then perform the installation again but this time without the gapps and again does not start is left in samsung logo. ..
Waiting for new release...
Thanks for keeping our S3 mini warrior alive :good::good:
regards...
This support shared storage?
Downloaded again de ROM and again it remains in a boot loop in the Samsung logo.
Thanks anyway for keeping this cell alive.
Back to RR 6.0.1 for the moment.
Thread cleaned.
Please do not share/discuss about other ROMs in this thread.
Thanks
Razvan
Forum Moderator
New Macław said:
ok, my friend also has this issue. will fix it this week and release fixed package.
Click to expand...
Click to collapse
Sorry Maclaw, i'd like to know if this ROM have OMS support, and which version it is, 5.8.1 or 5.8.2?
uptogeek said:
Sorry Maclaw, i'd like to know if this ROM have OMS support, and which version it is, 5.8.1 ir 5.8.2?
Click to expand...
Click to collapse
Yes, latest one. But please wait for next release, this one is quite unstable and works only on one revision of S3 Mini.
New Macław said:
Yes, latest one. But please wait for next release, this one is quite unstable and works only on one revision of S3 Mini.
Click to expand...
Click to collapse
Don't worry, thanks
I just installed it , it stuck on RR logo and repeats the Animation.
I tried to full wipe the device and again I installed it but the result was SAME and doesn't boot up.
LineageOS 14.1
FOR ROMS RELEASED BEFORE NOVEMBER 2018
Requirements:
1) active system1
2) merged system partition
Instruction
1) flash BootBlobs-SHIELD-mocha.zip
2) reboot to recovery
3) install this recovery
4) reboot to recovery
5) install the ROM
FOR ROMS RELEASED AFTER NOVEMBER 2018
Requirements:
1) active system1
2) merged system partition
3) BRAIN, READING SKILL and presence of basic knowledge about firmware (in the absence need learn to independently)
Instruction
1) download TosForPSCI-0.1.zip
2) unzip TosForPSCI-0.1.zip
3) download recovery-03.11.2018
4) go to fastboot mode
5) execute command: fastboot flash tos your path to tos.img
6) execute command: fastboot flash recovery your path to recovery-03.11.2018.img
7) reboot to new recovery(u can execute fastboot reboot holding vol+ button)
8) if you are on previous LineageOS 14.1 build then you may install the ROM without wipes. If you're not, make full wipes then
9) install current LineageOS 14.1 build
10) reboot to the system
Sources
Device
Kernel
Vendor
Changelogs
27.11.2019
system:
- the latest security patch by LineageOS team
- OMS support(Substratum)
- added color engine(Settings -> Display -> Themes)
- add/remove quick settings tiles with one touch
- optimized scroll gesture
- fixed bug in a gesture of calling the quick settings on the desktop
- open all apps gesture works across the entire desktop area
kernel:
- reconfigured Quick Charge mode(9V 2A)
28.10.2019
system:
- the latest security patch by LineageOS team
- Trebuchet replaced by Launcher3
kernel:
- all changes since release in December 2018
28.12.2018
system:
- the latest security patch
kernel:
- a little bit updated sdcardfs
- fixes of defects after switching to the new Synaptics touchscreen driver
03.11.2018
system:
- the latest security patch
- added tile for activatingdeactivating battery charging
kernel:
- new Synaptics touchscreen driver(possibly less lags)
- a little bit updated sdcardfs
- fixed a couple of security issues when using root
- PSCI downgraded to version 0.1
28.09.2018
system:
- the latest security patch
kernel:
- reworked binder driver(the system should be more stable)
19.08.2017
system:
- the latest security patch
kernel:
- dvfs driver was heavily updated(better power consumption)
- binder was updated
- therm_est thermal sensor was fixed
24.07.2018
system:
- source code was updated
- changes for devices with 3Gb RAM
kernel:
- added new driver(written by me) for reducing cpu power consumption in suspend mode.
- panel driver was changed for reducing power consumption in suspend mode
- palmas gpio driver was changed for reducing power consumption in suspend mode
18.06.2018
system:
- source code was updated
kernel:
- spectre patch by nvidia
- other small changes
21.05.2018
system:
- source code was updated
- usb internet sharing was fixed
- other small changes
kernel:
- sdcardfs was updated to the 3.18 kernel level.
- ability to change display colors was added
14.04.2018
system:
- sdfat was added(instead of vfat and exfat)
- audio HAL was updated(like in 15.1)
- 64-bit binder was returned
kernel:
Los14.1 and Los15.1 use an unified kernel for now. All updates from 15.1 are inside.
16.03.2018
kernel:
- usb otg for flash drives was fixed
- problems with battery percentages was fixed
09.03.2018
kernel:
- based on official rel-24-uda-r1 branch
- updated binder
system:
- we are using 64-bit binder for now
- updated sources
Broken:- Cameras
Download:Touchscreen hotfix for ROM released at 29.12.2018
ROM folder
Last build
XDA:DevDB Information
LineageOS 14.1, ROM for the Xiaomi Mi Pad
Contributors
Artemka2008
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2018-10-05
Last Updated 2020-03-09
27.11.2019
system:
- the latest security patch by LineageOS team
- OMS support(Substratum)
- added color engine(Settings -> Display -> Themes)
- add/remove quick settings tiles with one touch
- optimized scroll gesture
- fixed bug in a gesture of calling the quick settings on the desktop
- open all apps gesture works across the entire desktop area
kernel:
- reconfigured Quick Charge mode(9V 2A)
What is "tile for activating\deactivating battery charging"?
- this is system icon(like performance profiles) which permits\prohibits the supply of current to the battery at the time when the charger is connected.
Why do we need that tile?
- if you play, watch a movie or perform another costly action, then activating this mode will save the battery from unnecessary wear because energy will go directly from the charger. But you need a fairly powerful charger, if the power of the charger is not enough, then partially the consumption will be compensated by the battery.
What happens if you do not install TosForPSCI-0.1?
- at best, only one CPU core will be active. At worst, the recovery will not be started (if it has not been updated too) and the system too.
How to roll back on the firmware version, which came out before November?
- download TosForPSCI-0.2 and recovery. You'll be able to flash older ROMs after installing them
Why do I need to lower the PSCI version from 0.2 to 0.1?
- Using version 0.1 fixes a problem with shutting down a device.
Finally!an XDA thread.big thanks to Artemka2008
finally on xda thread!!big thanks to this rom contributor.
Best Rom for mi pad 1,dirty flash from previous build,works like a charm
Spassiba!
Absolutely great to see you back in XDA.
I've been following your progress thru 4pda.ru but sometimes google translate just doesn't do justice.
I would like to ask ppl who have used this ROM that how is the deep sleep power consumption?
There was few interesting changes in the 24.7 and 19.8 versions that could make the stand-by drainage less severe.
Tautologica said:
Spassiba!
Absolutely great to see you back in XDA.
I've been following your progress thru 4pda.ru but sometimes google translate just doesn't do justice.
I would like to ask ppl who have used this ROM that how is the deep sleep power consumption?
There was few interesting changes in the 24.7 and 19.8 versions that could make the stand-by drainage less severe.
Click to expand...
Click to collapse
i lost 4-5% around 9 hours deep sleep mode with wifi turned off + greenify
thats pretty good i guess
Hell o , im using last build
My battery indicator percentage stuck and after continously use , then the tablet suddenly got shutdown.?
what should i do? help this noob .
pussel said:
Hell o , im using last build
My battery indicator percentage stuck and after continously use , then the tablet suddenly got shutdown.?
what should i do? help this noob .
Click to expand...
Click to collapse
Your battery is not calibrated.use any app or fully discharge and charge to 100% 2 or 3 times and this will be fixed.issue and remedy common with new rom flash
hello,my battery is jump to 0 from 30-40
I've been on update 8 (2018/06/18) for months and Mipad finally stuck at LOS logo. Please tell me why.
Clean install (update 11) done, the issue's still there after a couple of days. Actually, I only need to do factory reset to fix this.
Hi guys, any news about camera patch?
Thanks ?
velociraptor68 said:
Hi guys, any news about camera patch?
Thanks
Click to expand...
Click to collapse
Forget about cameras
Why? ?
velociraptor68 said:
Why?
Click to expand...
Click to collapse
Because
Artemka2008 said:
Because
Click to expand...
Click to collapse
Eh eh eh ? the lineageos 14 alpha version rom 2017 have camera support... this rom not. We can take camera module from that rom? ?
velociraptor68 said:
Eh eh eh the lineageos 14 alpha version rom 2017 have camera support... this rom not. We can take camera module from that rom?
Click to expand...
Click to collapse
Stop writing stupid things pls
stupid me who doesnt read helps you guys to test what will happen if dont install the TOS patch...
it will install and boot without any issue... BUT if it is not connected to charger and once you off the screen, it turns off.
I tot my battery is dead but then I go back and read the whole thread again then realize there is a new instruction for installing new ROM... so guys... please read the whole thread next time... haha...
different device might have different results but this is what happen to mine...
---------- Post added at 01:17 PM ---------- Previous post was at 01:00 PM ----------
I found the on-screen navigation toggle (under button right?) is missing. Is it being removed in the latest version or i mess something up again? FYI, i did a clean install.
Hi, I installed last rom 03.11.2018, it is very smooth. I try to record audio by microphone, but don't work... instead google assistant understand my voice.
Thanks
I would like to try this ROM, does it have gapps and root already integrated?
Let me answer my question: no, gapps and root need to be installed separately.
This ROM is wicked fast and smooth!
Im in AOSP extended oreo right now. Can i install this rom directly?
This is Jaguar Q, a continuation of Jaguar Pie. The project aims at hardening of Android and Linux kernel + performance. :
1. Hardened bionic (which is responsible for C+/C++ portions of Android)
2. Hardened kernel (many features ported from 4.14 kernel)
3. Selinux replaced with Yama security
4. Various features, such as Alarm blocking and Wakelock blocker
5. Rom can boot on locked bootloader, but if you require root and Magisk, you must unlock
6. Various options from the top down starting from Status bar to Navigation bar.
7. Gestures, etc.
8. Kernel is the same as in Jaguar Pie with many security commits from Linux Hardened project
9. MicroG support
10. Adaway entries incorporated into Android native hosts file.
11. Calendar and Calculator with their own extensive theming options added, credit to Tibor Kaputa of Simple Mobile Tools
12. Toggle in Wireless options to get rid of Captive Portal (no more little 'x' if Captive Portal is removed)
and more...
Regular features include various customizations in statusbar, lockscreen, gestures, aggressive battery, smart battery, battery bar, ambient display, hardware buttons, smart pixels, power menu, notifications. Almost every custom feature from Pie has been ported
Requirements: Unlocked bootloader, if you require Magisk/Root, minimum 9.0.9 firmware and TWRP capable of mounting/writing Vendor partition
Instructions: Detailed instructions are in post #3 together with download links
New Kernel Source effective March 5, 2020: https://github.com/optimumpr/kernel_oneplus5_msm8998
Kernel Source: https://github.com/optimumpr/android_kernel_oneplus_msm8998-1
Credits: AOSP, DU, OMNI, BENZO, LINEAGE, CARBON, XTENDED, Paranoid Android and everybody who contributed to Kernel (all listed in the link)
XDA:DevDB Information
JAGUAR Q, ROM for the OnePlus 5
Contributors
optimumpro
Source Code:
https://github.com/optimumpr/android_kernel_oneplus_msm8998-1
ROM OS Version: 10.x Q
ROM Kernel: Linux 4.x
ROM Firmware Required: 9.0.9 Firmware minimum; Unlocked Bootloader, if Magisk is Required
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 10
Stable Release Date: 2020-01-15
Created 2020-01-15
Last Updated 2020-11-04
Some screenshots:
Preamble:
1. Android Q no longer has FDE, just FBE. So, Jaguar is force-encrypt, which means the phone will be encrypted on first boot. Don't use 'no force-encrypt addons', as you will have problems with hardware (WIFI/GPS/Bluetooth etc), as much of the init related code in Q have been re-written to adapt to 'force-encrypt' FBE. There is no reason whatsoever not to encrypt your phone. The only temporary con is that every time before upgrading, you would have to remove your pin code, that is until the Q version of TWRP is available
2. Locked bootloader: The rom will boot and function on locked bootloader with no warning whatsoever (like on stock). However, since Android Q no longer has AVB v1 boot signing (It has been replaced with AVB v2), on device signing is no longer available. That means any kernel modification (such as what Magisk does) will result in a red warning screen and no boot. So, if you want Magisk and Root, unlock your bootloader
Instructions:
1. If you are coming from any Pie rom, including stock, full wipe is required including internal SD card. That means selecting 'Wipe' and 'Format Data' in TWRP, where you'd need to enter 'Yes' to confirm formatting. Such formatting will erase everything on your internal SD card including all previous TWRP backups. So, transfer whatever you need to a PC. After formatting, reboot in TWRP again.
2. Make sure to have at least 9.0.9 firmware. Otherwise, flashing will abort
3. TWRP: wipe System/Data/Vendor/Cache
4. Flash the rom and boot once. After that do whatever you want: Gapps/Magisk, etc. .
DOWNLOADS
December 8, 2020. New release, V16
1. Android r49
2. December security patches
3. Lockscreen clock styles
4. One hand UI
Flashing on top of the previous release is fine. Otherwise, read instructions:
Download rom V16: Rom V16
November 5, 2020. New release, V15.1
This fixes SMS sending in V15
1. Android r48
2. November security patches
3. Seedvault backup added
4. Long pin/password compatible with quick unlock
5. Omniweather is back with extra provider
Dirty flashing is fine on top of the previous release
Download rom V15.1: https://androidfilehost.com/?fid=10763459528675578121
October 9, 2020. New release, V14
1. Android r47
2. October security patches
3. Volume Panel location left/right
4. Amoled theme added in keyboard
Dirty flashing is fine.
Download Rom V14: https://androidfilehost.com/?fid=10763459528675559111
September 23, 2020. New release, V13
1. Application Locker implemented - you can lock any app with a fingerprint (Settings/Security/Application locker)
2. Most userdebug overhead removed, including console, so, rom is more fluid now
3. Fix for Jaguar features icons not shown in light theme
Dirty flashing is fine on top of previous release, otherwise, read instructions above.
Download rom V13: https://androidfilehost.com/?fid=8889791610682943691
September 18, 2020. New release, V12.1
1. Device host name could be customized
2. Wired accessories additions
3. Jaguar rom options drawables made light/dark, as in the rest of Settings
4. Glonass gps enabled
5. Device name changed to pass Safetynet without Magisk
Dirty flashing is fine on top of the previous release
Download rom V12.1: https://androidfilehost.com/?fid=8889791610682940780
September 9, 2020. New release, V12
1. Google r46
2. September security patches
3. Updated kernel
4. Preventing apps from getting IMSI and Build numbers
5. Disabled Google analytics when Gapps are installed
6. Safetynet should work without Magisk
7. Latest CAF changes
Dirty flashing is fine on top of the previous release
Download rom V12: https://androidfilehost.com/?fid=8889791610682933697
August 9. New release, V11
1. Google r41
2. August security patches
3. Screen stabilization (enabled via Quick tile)
4. Bluetooth playing/media transfer fixed
5. Rom version added in 'about phone'
6. Guest user: Disallow audio recording and disallow app install
Dirty flashing is fine on top of previous release.
Download rom V11: https://androidfilehost.com/?fid=8889791610682911588
July 29: New release, V10.4
1. Fixes some third party apps access to media files on internal SD card
2. Fixes some NFC glitches, such as 'can't open secure_element'
Dirty flash is fine on top of the previous release
Download rom V10.4: https://androidfilehost.com/?fid=8889791610682902982
July 24. New release, V10.3
Fixes call recording, as well as other improvements
Dirty flashing is fine on top of the previous release. Otherwise, see instructions
Download rom V10.3: https://androidfilehost.com/?fid=8889791610682899179
July18. New release
1. Bluetooth fix: Keep in mind that codec selection will only work when bluetooth is ON
2. Ringtone audio focus options
3. Sensor access moved to Settings/Privacy/Jaguar permissions
Dirty flashing on top of previous release is fine. Otherwise, read instructions
Download rom V10.2: https://androidfilehost.com/?fid=8889791610682894733
July 16. Rom updated:
1. Fix for Cut/Paste issue
2. Separate settings for Background Clipboard Access per app (Settings/Privacy/Jaguar permissions)
3. Overclocked Slimbus (kernel)
Dirty flash on top of the previous release is fine. Otherwise, read instructions
Download rom V10.1: https://androidfilehost.com/?fid=8889791610682893361
July 7. Rom updated:
1. Android r40
2. July security patches
3. Kernel to 4.4.228
4. Touch response optimization
5. Completely redone Bluetooth – new codecs including TWS (see options in Development)
6. UI cleanup, where some settings appeared more than once
7. Additional Volte icon
8. Fix battery optimization taking long time to load
9. Redone notification lights
10. Dock settings (Settings/Sound)
11. Hide apps from recents
12. My version of Afwall included, but disabled by default
Dirty flash is fine on top of previous release. Otherwise, read instructions
Download rom V10: https://forum.xda-developers.com/devdb/project/dl/?id=32405
June 14. Rome updated:
1. Toggle access to all networks per app (in addition to granulated access)
2. Toggle access to Camera on secure lockscreen (in addition to removing a short cut)
3. Configure each app access to sensors
4. UI redesign: all 'disable on secure lockscreen' features moved to Settings/Security
5. Real battery capacity (in Settings/Battery)
Dirty flashing is OK on top of the previous release. Otherwise, read instructions above.
Download rom V9.1: https://forum.xda-developers.com/devdb/project/dl/?id=32397
June 6. Rom updated to V9:
1. June security patches
2. Google release 39
3. Screen recording with sound
4. Keyboard back to AOSP+ with an extra row for numbers
5. Most blobs from Oxygen 10 stable
Dirty flash on top of the previous release is fine. Otherwise read instructions.
Download rom v9: https://forum.xda-developers.com/devdb/project/dl/?id=32391
May 23. Rom updated. V-8.1
1. Rom rebuilt with dexpreopt for speed (100mb larger as a result)
2. Pocket judge driver implemented in kernel
3. Unprivileged userland implemented (in kernel) and disabled
3. Kernel to 4.4.223
4. Keyboard now has gestures
5. Webview updated to V83.xxx
6. Platform, Hardware and Ram info in about phone
7. Some blobs from Oxygen Q beta 3
Dirty flashing on top of the previous release is fine. Otherwise read instructions.
Download rom, v-8.1: https://androidfilehost.com/?fid=4349826312261816992
May 6. Rom updated. V-8
1. May security patches
2. Android r36
3. Kernel updated to 4.4.221
4. Graphics firmware and blobs from Oxygen (not buggy Hydrogen) Q beta
5. Qperformance blob from Oxygen Q to work with Qcom boostframework
6. Notification/alarm/ringtones added from Oxygen Q
Download rom V-8: https://androidfilehost.com/?fid=4349826312261799767
Dirty flashing on top of the previous release is fine. Otherwise, read instructions above.
April 21. Rom updated, V-7.2
1. Face unlock independent from Google apps/services
2. AOD QS tile.
3. Updated system apps.
4. Theme-able icons for Jaguar settings room (forgot to mention it in V7)
Dirty flash is fine on top of the previous release. Otherwise, read instructions.
Download rom V-7.2: https://androidfilehost.com/?fid=4349826312261778372
April 8. Rom updated, V-7
1. Android release 33
2. April security patches
Dirty flash on the previous release is fine
Download rom V7: https://androidfilehost.com/?fid=4349826312261765647
March 29. Rom updated, V-6
1. Theming changed, so now, you have dark and light interfaces with system wide accents of any color
2. Kernel updated to 4.4.217
3. Mobile data panel added (on long click in QS)
Dirty flash on top of the previous release is fine
Download rom V-6: https://androidfilehost.com/?fid=4349826312261757249
March 19. Rom updated, V-5.2
1. AOSP dark mode replaced with DU themes
2. More permissions added for Lawnchair
3. Wallpaper picker updated
Dirty flash on top of the previous release is fine.
Download V5.2: https://androidfilehost.com/?fid=4349826312261750138
March 16. Rom updated to V5.1
1. Option to adjust minimal brightness
2. AGPS switch
3. Switched to Lawnchair as home
4. Blobs updated to 9.0.11
Dirty flash on top of the previous release is fine. Otherwise - clean flash - read directions above
Download Rom V5.1: https://androidfilehost.com/?fid=4349826312261747017
March 5. Rom updated. V5
1. Rebased kernel
2. Offline charging
3. March security update and latest Android sources
4. Network traffic dynamic option
5. Night mode automatic (sunset/sunrise)
6. Sound picker backwards compatibility (no more f/c on older apps, when changing notification sounds)
Dirty flashing is fine, if on a previous release. Otherwise, clean flash, see instructions above
Download rom V5: https://androidfilehost.com/?fid=4349826312261738133
February 8. Rom updated, V4
1. February security patches and latest Android sources
2. Further simplification of UI
3. Get rid of certain features (font options) to lighten the rom
4. Notification vibration toggle
5. Google calendar crash fixed
Dirty flashing is fine. Otherwise, read instructions above.
Download rom V4: https://forum.xda-developers.com/devdb/project/dl/?id=32329
___________________________________________________________________________________________________________________
January 30. Rom updated, V3
1. Latest Android source
2. Revised UI (lockscreen features are now in 'Display/Lockscreen')
3. Fingerprint additional settings (vibration) are now in 'Security' next to Fingerprint
4. Notification options are now in 'Apps and Notifications'
5. Restored original 'hosts' file to prevent issues with Googleplay download
6. Call recording enabled for all
7. Priv-app permissions for several Google apps are introduced and enforced
8. Gboard is replaced with open source OpenBoard
9. Flashlight blinking on calls removed, as it couldn't be turned off
Credit for OpenBoard to dslul: https://github.com/dslul/openboard
Dirty flashing over the previous release is fine
Download rom V3: https://forum.xda-developers.com/devdb/project/dl/?id=32313
____________________________________________________________________________________________________________
January 20. Rom updated, V2
1. Redesigned UI. Theming and doze settings moved to Display; Extra battery settings to Battery
2. Lockscreen fonts options
3. New hosts file, which allows connection to googleplay
4. New icon for Private Dns
5. Print services icon now themeable.
Dirty flash is fine.
Download rom V2: https://forum.xda-developers.com/devdb/project/dl/?id=32287
__________________________________________________________________________________________________________________
Download rom V1: https://forum.xda-developers.com/devdb/project/dl/?id=32261
Thanks! Time to upgrade to android 10
Is there any feature list available?
Added to the OnePlus 5 Index Thread here.
Fyi GitHub link is dead
Binary Assault said:
Fyi GitHub link is dead
Click to expand...
Click to collapse
Fixed.
Play Store works neither with microG nor with gapps. Seems to be a problem with Jaguar, as a full clean install had the same problem. I just normally installed 9.0.10 firmware with Jaguar, Magisk and Gapps, but Play Store stuck at pending the download.
Pokemetti2 said:
Play Store works neither with microG nor with gapps. Seems to be a problem with Jaguar, as a full clean install had the same problem. I just normally installed 9.0.10 firmware with Jaguar, Magisk and Gapps, but Play Store stuck at pending the download.
Click to expand...
Click to collapse
1. See if anyone else has this problem.
2. Did you boot once before installing Gapps and Magisk?
3. Check if you didn't restrict wifi/mobile for 'Downloads' and 'Download manager'
4. If none of the above works, then open /system/system/etc/hosts, delete everything after '::1 localhost' (leave one empty line in the end), save and reboot. It is possible that the Adaway hosts file has some entries preventing connection
Had same issue but while deleting some hosts from the host file it started downloading from the play store
undopt said:
Had same issue but while deleting some hosts from the host file it started downloading from the play store
Click to expand...
Click to collapse
Which one did you delete? Or if you don't remember, just post your hosts file.
pixel theme bug
didn't work for cange accent color default
log :
https://del.dog/dapyrfarfi
Hi thanks for the update but the link seems to be dead
optimumpro said:
Which one did you delete? Or if you don't remember, just post your hosts file.
Click to expand...
Click to collapse
I just deleted some of the first few lines. Here is the file.
https://gofile.io/?c=KWSRpl
optimumpro said:
1. See if anyone else has this problem.
2. Did you boot once before installing Gapps and Magisk?
3. Check if you didn't restrict wifi/mobile for 'Downloads' and 'Download manager'
4. If none of the above works, then open /system/system/etc/hosts, delete everything after '::1 localhost' (leave one empty line in the end), save and reboot. It is possible that the Adaway hosts file has some entries preventing connection
Click to expand...
Click to collapse
Thanks for the response. I didn't boot before installing Gapps, I first tried doing microG and then FlameGapps. I installed crDroid but I'm gonna try your tips out now.
undopt said:
I just deleted some of the first few lines. Here is the file.
https://gofile.io/?c=KWSRpl
Click to expand...
Click to collapse
I think you have cut too much. Those were a few google entries like google syndication etc..
For now, everyone could use your file and manually transfer it (in TWRP) to /system/system/etc
mazino1003 said:
Hi thanks for the update but the link seems to be dead
Click to expand...
Click to collapse
The link is fine. You can also go into Download section on top and get it from there.
A kind of "feature request" to optimumpro: Please make the CPU Input boost configurable from FKM! Appreciated from my side, but your choice.
Pokemetti2 said:
A kind of "feature request" to optimumpro: Please make the CPU Input boost configurable from FKM! Appreciated from my side, but your choice.
Click to expand...
Click to collapse
Use Kernel Adiutor.
TELEGRAM CHANNEL ADDED: HERE
TELEGRAM CHAT GROUP: HERE
Jaguar is available on locked bootloader with working root (Magisk)
SAFETY NET PASSING FIXED AS OF Version 19 (confirmed)
Instructions Here
You can actually use alarm when the phone is shut down. It would boot 2 minutes prior to scheduled time and trigger the alarm on time
This is official build of Jaguar Rom.
I have been building Android roms since 2012 for various devices including multiple Sonys, Lenovo Zuk, Oneplus 3, Oneplus 5 and Oneplus 6 and Oneplus 8 series. You can check my Oneplus 8 or Oneplus 8T or Oneplus 6 or Oneplus 6T or Oneplus 8 Pro threads.
Jaguar rom is focused on hardening of AndroidOS and kernel. As such, the rom has hardened bionic, art, framework and tightened security.
1 Rom control with custom Power options, Statusbar, Buttons, Navbar, Quicksettings, Lockscreen, Notifications, Gestures, Themes etc...
2. Heavily modified Art, Bionic System/Vold and System/Security
3. Telephony response to Type Zero sms ('silently acknowledged') disabled
4. Toggle to disable Captive Portal logging.
5. Speakerphone proximity sensor toggle - could be set to automatically switch to speaker when not at the ear
6. IMEI and phone numbers hidden in About menu
7. Built-in encrypted DNS providers, such as: Cloudflare (US); LibreDns (Germany); AdguardDns (Cyprus); and PowerDns (Netherlands)
8. Wakelock and Alarmblocker
9. Fully working Call recording with the button visible in Dialer
10. Deskclock app modified to work with PowerOn alarm. The app will boot the phone 2 minutes before scheduled time to trigger the alarm on time
11. Default Dark mode
12. All regular customizations plus. You tell me which feature is missing.
13. Prebuilt Magisk 23 (coming soon to 9 Pro). You wouldn't have to flash it, just need to install Magisk manager.
Install instructions (first time use)
OOS 11 in both slots. This is not a Jaguar requirement, but rather a universal one for any custom rom, including Android 12.
Keep in mind, MSM takes care of one slot only. You need to manually install OOS-11 into another slot. Either boot into system (after MSM) and install OOS-11 by using a local option or boot into TWRP and install OOS-11 again. If there is no suitable OOS-11 for your device (branded etc), use Lineage's partition copy method. Link here
1. Fastboot flash recovery images:
Code:
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
2. Reboot in recovery (TWRP), now Lineage type, sideload and flash the rom, factory reset and reboot.
If you want Gapps on Vanilla (not necessary on Full version), they should be flashed before the first boot into system, i.e., after flashing the rom, reboot in Recovery (mandatory) and flash Gapps.
When downloading from XDA or Android File host, put your browser in incognito.
All Releases ARE in post #3
XDAevDB Information
JAGUAR R, ROM for the OnePlus 9 Pro
Contributors
optimumpro
Special thanks to @Warrkill for testing
Kernel Source Code: HERE
ROM OS Version: 11.x R
ROM Kernel: Linux 5.x
ROM Firmware Required: OOS11 in both slots
Based On: AOSP/Lineage/DirtyUnicorn/Crdroid
Version Information
Status: Stable
Stable Release Date: 2021-01-26
Created: 2022-01-26
Updated: 2023-06-07
Credit: AOSP, Lineage, DU, Crdroid, CalyxOS
The rom could be used on locked bootloader with ROOT (donate feature) with or without Gapps.
The benefits of LOCKED BOOTLOADER combined with WORKING AVB-2 protection are:
Get your DRM L1 certificate back. Most banking apps (if not all) will work with or without Magisk: you cimply get a warning 'your devices is rooted', but you can proceed to login
Security: Nobody and nothing can modify Kernel, Recovery and Virtual Partitions without triggering a red screen of death with the message 'your device is corrupted and cannot boot'.
At that point, the only option is to unlock bootloader. But, if a user had previously disabled OEM unlock in Developer settings, then unlocking becomes unavailable, and so does flashing via fastboot. In other words, if your phone gets into the hands of an adversary, their only option is to use MSM tool to make the phone work again, but no access to your data or any other partition.
The rom can also allow you to flash Magisk on locked bootloader. If interested, send me a PM.
Some screenshots of the rom (from Oneplus 8 thread): HERE
WHEN DOWNLOADING FROM XDA, PUT YOUR BROWSER IN INCOGNITO
For Indian Users Only: If you don't have 5G, that means that you have an older handset and Indian carriers didn't provide their modem configuration to Oneplus in time. In this case, use QPST method which has been confirmed working
June 7. New Release V-33
1. June security patches
2. Android r68
3. Updated webview
4. New 'about Jaguar' section
5. New system-wide accents added: total over 70
6. Forced disable AGPS toggle now disables PSDS servers too
7. Access to Radio preference in 'about phone'
8. Option for figerprint icons to take system-wide accents
9. DocumentsUI/Files now can set homescreen shortcuts for most files
Dirty flashing on a previous release is fine
Download rom V33 VANILLA: Here
Download rom V33 FULL: Here
May 7, New Release V-32
1. May security patches
2. Android r67
3. Amoled black switch (for dark mode)
4. Sometimes missing SMS fixed
5. Bionic and Art updated to latest upstream (Android 13)
6. Gray accents darkened
7. Updated webview
8. InCall UI now takes selected system-wide accents
9. Battery Bar centered.
Flashing on top of a previous release is fine
Download rom V32 VANILLA: superseeded
Download rom V32 FULL: superseeded
April 12. New Release V-31
1. April security patches.
2. Android r66
3. Toggle to disable AGPS
4. Toggle to disable Direct Share
5. Number of users increased to 32
6. Webview to 112.x
7. Missing OneplusDoze app included
8. No phone ID sent to servers when AGPS used
9. Shelter integrated as Work Profile Manager
10. No more statusbar icons cut off when burnin is shifting
11. No more ghost fingerprint icon
Dirty flashing on top of a previous release is fine
Download rom V31 VANILLA: Here
Download rom V31 FULL: Here
Recovery (UNZIP to INSTALL): Here
March 22. New Release V-30.1
1. Fixes a bug (not attaching photos in messengers) introduced in V30
2. Fixes a long press on Data QS toggle.
Dirty flashing is fine on a previous release
Download rom V30.1 VANILLA: Here
Download rom V30.1-FULL: Here
March 16. New release, V-30
FOD Issue has been Fixed
1. FOD non-wakeup issue has finally been fixed
2. March security patches
3. Android r65
4. Internal Firewall icon shown in status bar when an app access is denied
5. GPS does not turn automatically during emergency call unless enabled by user
6. Updated Webview
7. Some new ringtones/alarm/notification sounds added
8. Bug fixing
Dirty flashing on a previous release is fine
Download rom V30 Vanilla: Removed see above
Download rom V30 Full: Removed see above
February 7. New Release V-29
1. February Security patches
2. Android r64
3. Ability to display true app icons in Statusbar/Lockscreen Notification
4. Sound pulse: new placing options
5. Updated Opencamera
6. Webview to 109
7. Adaptive network connectivity (battery saving feature)
8. Fixed network traffic arrows
9. Fixed charging sounds - Connect/Disconnect
Download rom V29 VANILLA: Here
Download rom V29 FULL: Here
January 5. New release V-28
1. January security patches
2. Android r63
3. Updated kernel
4. Bionic ported from Android 13
5. Smart pixels removed (poorly implemented and unfixable)
6. Trustcor certificates removed
Dirty flashing on a previous release is fine
Due to some changes in kernel, and the fact I don't have any of the 9 series, there is a slight chance this version may not boot. If so, please run a logcat.
Download rom V28-FULL: Here
Download rom V28-VANILLA: Here
December 8. New release V-27
1. December security patches
2. Android r62
3. Full internal Firewall (In Settings/Network & Internet)
4. Multi-resolution for Gcam
5. Background notification opacity
6. Webview to 108
7. Reworked Connectivity settings: make sure it is OFF in Settings/Network & Internet, then toggle airplane mode OFF/On
Dirty flashing on a previous release is fine
Download rom V27 VANILLA: Here
Download rom V27 FULL: Here
November 10. New release V26:
1. November security patches
2. Android r61
3. Dialer, Contacts, Calendar and Calculator are aligned with system-wide accents
4. Screen flickering leftovers on FOD unlock are completely gone
5. Smart pixels no longer disable permissions
6. Toggle to turn on/off screenshot saving (Settings/Privacy)
7. Webview to .107
Download rom V26 VANILLA: Here
Download rom V26 FULL: Here
October 7. New release V-25
1. October security patches
2. Android r60
3. Fingerprint brightness flickering - addressed
4. Webview 106.x
5. Some selinux denials (system_suspend) - addressed
Dirty flashing is fine on a previous release
Download rom V25 VANILLA: Here
Download rom V25: FULL: Here
September 8. New release V-24: major update
1. September security patches
2. Android r59
3.Ability to change clock size in statusbar and quicksettings
4. Rom is now compatible with Magisk 25 and Lsposed
5. Fingerprint enrollment fixed
Dirty flashing is fine on previous releases
Download rom V-24 VANILLA: Here
Download rom V-24 FULL: Here
August 7. New release V-23
1. August security patches
2. Android r58
3. 5G network options in OneplusSettings
Dirty flashing is fine on a previous release
Download rom V-23 VANILLA: Here
Download rom V-23 FULL: Here
July 8. New release V-22
1. July security patches
2. Android r57
3. Clear clipboard quick setting toggle
4. Metro audio player
5. Many under the hood improvements
Download rom V-22 FULL: Here
Download rom V-22 VANILLA: Here
June 7. New release V-21:
1. June security patches
2. Android r56
3. Automatic sleep/suspend mode (scheduled by a user) in Settings/Battery
4. 'Internet permission missing' issue with several apps fixed. Now, all apps including Googleplay, as well as third party apps, have no problems connecting to the internet (no F/C)
Dirty flashing is fine on a previous release
Download rom V21-VANILLA: Here
Download rom V21-FULL: Here
Download recovery: Here
May 29. New release V-20.2
1. Captive portal now On/Off
2. Addressed some apps crashing with message "missing Internet permission'
3. HBM fixed, now fully working (Auto HBM is recommended with trigger set to 40000 lux in Oneplus Settings)
4. One shot auto-brightness
5. In-call volume increased for Speaker and Headset
Dirty flashing is fine on a previous release
Download rom V20.2 VANILLA: Here
Download rom V20.2 FULL: Here
Recovery: Here
May 12. New release V-20.1
1. Redone adaptive brightness
2. Call recording (bug introduced in V-20) fixed
3. Captive portal: added 3 options Standard (Google), Alternative and Disabled) and moved to Settings/Network
4. Fingerprint icons and colors made more transparent, so, now fingerpint works flawlessly.
Dirty flashing is fine on a previous release
Bootlooping issue has been fixed. You can use this user-debug full version or wait for June release.
May 7. New release, V-20
1. May security patches
2. Google r55
3. Recovery fixed to have 'yes/no' prompt on signatures mismatch (for Magisk). Recovery will install automatically, just reboot to flash Magisk etc.
April 29. New release V-19.1
1. Wakelock blockers in kernel
2. Jaguar version is now displayed in About phone
3. Choice for temperature units F/C for lockscreen battery info
4. A bunch of other under the hood improvements
5. Fixes array mismatch in fingerprint
Dirty flashing is fine
Download rom V19.1 VANILLA: Here
Download rom V19.1 FULL: Here
April 16. New release V-19.1:
1. AOD is fully working (see screenshot Here)
2. Experimental feature: toggle to spoof Pixel to get unlimited storage for Google Photos (in Settings/Accessibility)
Dirty flashing on a previous release is fine.
Download V-19.1-VANILLA: Here
Download V-19.1-FULL: Here
Recovery: Here
April 7: New release V-19. Safetynet is fixed, confirmed by an Oneplus 8 user here with detailed explanation here
1. April security patches
2. Google r54
3. Switched to AOSP webview 100.x
4. Working with Zgisk (confirmed)
5. Seedvault is back
Dirty flash is fine on a previous release
Download rom V19-VANILLA: Here
Download rom V19-FULL: Here
Download recovery: Here
March 12. New release, V-18
1. March security patches
2. Android r53
3. User build
4. Updated kernel
5. Options to choose between Bromite and Vanadium webivew
6. Optional torch flashing on incoming calls
7. Night display renamed into Display calibration
8. Full version of the rom added
Dirty flashing is fine on top of a previous release
Download rom V-18 Full version: Here
Recovery: here
Download rom V-18 Vanilla Vanilla version : Here
Recovery: Here
February 10, 2022. New Release - V-17
1. February security patches
2. Android r52
3. TWRP recovery replaced with a Lineage type
4. Toggle to hide statusbar clock (when launcher is active)
Dirty flashing is fine on top of a previous release
Download rom V-17: HERE
Boot: HERE
Vendor_boot: HERE
Reserved.
Reserved
Badass
I'm interested in flashing but want to know about the locked bootloader feature. I'd seen that it's been a possibility for some time but not sure I've understood what I've seen about it, and you say it is a donate feature. Does that mean we need to donate, then get a flashable file that would prevent bricking upon locking the bootloader, or is it simpler/more complex than that?
thats_the_guy said:
I'm interested in flashing but want to know about the locked bootloader feature. I'd seen that it's been a possibility for some time but not sure I've understood what I've seen about it, and you say it is a donate feature. Does that mean we need to donate, then get a flashable file that would prevent bricking upon locking the bootloader, or is it simpler/more complex than that?
Click to expand...
Click to collapse
Yes. The process is as easy as it gets: you just flash one file in fastboot and relock.
This issue has been run by XDA moderators and their official response was: this donate feature is allowed, see HERE from my Oneplus 8 Pro thread:
About donation features: YES, IT'S ALLOWED! Sometimes. Shocker, I know. The moderation team may be tasked with – among many many many other things – shutting down projects that have only the goal of making money but this does not mean that donation features are forbidden. We expect that core features and most important functionality of any release remains free. We also understand that developing software is hard work which should be rewarded. Our goal is to find a balance and we do this together, as a community. To achieve this we often work with developers to find the best outcome for everyone.
Click to expand...
Click to collapse
So, if anyone is interested in relocking feature, please contact me via PM.
optimumpro said:
Yes. The process is as easy as it gets: you just flash one file in fastboot and relock.
This issue has been run by XDA moderators and their official response was: this donate feature is allowed, see HERE from my Oneplus 8 Pro thread:
So, if anyone is interested in relocking feature, please contact me via PM.
Click to expand...
Click to collapse
Great to know, just finding the time to flash and restore is what's holding me back, but will try it out soon
Bro, I appreciate your work on rom. However, few bugs I should mention:
1. There is a bug that recent key button doesn't work. I tried everything. Even in gesture it doesn't work.
2. Speaker sound is bit low compare to OOS 11.
3. Wifi speed is just bit slower compare to OOS 11.
4. Some apps crashes like Tiktok, Skype and Banking app.
other than that, good rom. Nice job
break.cold said:
Bro, I appreciate your work on rom. However, few bugs I should mention:
1. There is a bug that recent key button doesn't work. I tried everything. Even in gesture it doesn't work.
2. Speaker sound is bit low compare to OOS 11.
3. Wifi speed is just bit slower compare to OOS 11.
4. Some apps crashes like Tiktok, Skype and Banking app.
other than that, good rom. Nice job
Click to expand...
Click to collapse
You probably installed another launcher. Starting from Android 10, only one launcher can have recents. You need a Magisk module that will switch to your specific launcher and then you'll have recents.
WIFI: My home internet connection speed is 300MB. My PC is hardwired and shows about 330/330MB, my Oneplus 8 shows around 310/290MB. See screenshot:
optimumpro said:
You probably installed another launcher. Starting from Android 10, only one launcher can have recents. You need a Magisk module that will switch to your specific launcher and then you'll have recents.
WIFI: My home internet connection speed is 300MB. My PC is hardwired and shows about 330/330MB, my Oneplus 8 shows around 310/290MB. See screenshot:
Click to expand...
Click to collapse
I used stock launcher meaning the one come with rom. Didn't install any other launcher.
I even tried to reinstall rom with Gapps from scratch but still problem exist.
optimumpro said:
Yes. The process is as easy as it gets: you just flash one file in fastboot and relock.
This issue has been run by XDA moderators and their official response was: this donate feature is allowed, see HERE from my Oneplus 8 Pro thread:
So, if anyone is interested in relocking feature, please contact me via PM.
Click to expand...
Click to collapse
in future jaguar rom updates you release, it is posible to update with dirty flash in relocked bootloader?
Also, how much time you hoping to support this op9pro rom? You will release only Security patches?
bugac said:
in future jaguar rom updates you release, it is posible to update with dirty flash in relocked bootloader?
Also, how much time you hoping to support this op9pro rom? You will release only Security patches?
Click to expand...
Click to collapse
After relocking, updates are done the same way as with unlocked bootloader. You'd only need to unlock, if you switch to another rom.
9 Pro will be supported for longer than Oneplus 6s and 8s. Android 12 will replace 11 eventually, probably around r30.
break.cold said:
I used stock launcher meaning the one come with rom. Didn't install any other launcher.
I even tried to reinstall rom with Gapps from scratch but still problem exist.
Click to expand...
Click to collapse
Gapps are known to override stock launcher. Launcher3 included with Jaguar has no problem accessing recents.
optimumpro said:
Gapps are known to override stock launcher. Launcher3 included with Jaguar has no problem accessing recents.
Click to expand...
Click to collapse
So what do you recommend me to do?
break.cold said:
So what do you recommend me to do?
Click to expand...
Click to collapse
Install another Gapps package that doesn't override launcher. Or open a configuration file in your current gapps zip, There will be a list of apps to install. Find a launcher (Google or whatever it is) and either delete the line or put an '#' at the beginning of it.
Or find the same of the launcher in Settings/Apps and Notification and install a Magisk module that switches recents to the new launcher.
optimumpro said:
Install another Gapps package that doesn't override launcher. Or open a configuration file in your current gapps zip, There will be a list of apps to install. Find a launcher (Google or whatever it is) and either delete the line or put an '#' at the beginning of it.
Or find the same of the launcher in Settings/Apps and Notification and install a Magisk module that switches recents to the new launcher.
Click to expand...
Click to collapse
I use OpenGapps.
break.cold said:
I use OpenGapps.
Click to expand...
Click to collapse
Don't install the full package. Do Pico and then install additional apps you need as regular apps.
This is not a rom problem. As I have already said, Android frameworks allow only one app to be registered for Quickstep recents. To have another launcher, you must use Magisk module that does the switching.
break.cold said:
I use OpenGapps.
Click to expand...
Click to collapse
Here is the module. Get the name of your current launcher from Settings/Apps & Notifications, and use the module.
optimumpro said:
Here is the module. Get the name of your current launcher from Settings/Apps & Notifications, and use the module.
Click to expand...
Click to collapse
Ok. Thank you I will try.