Related
primou-ics-3.0.16-e45af48.tar.gz
primou-ics-3.0.16-e361aa7.tar.gz
http://www.htcdev.com/devcenter/downloads
my github: HERE
kernel for test: HERE
V2:
- patched to 3.0.30
great news for the HTC One V-community?
mrmad23 said:
great news for the HTC One V-community...
Click to expand...
Click to collapse
Ya... only when we have developer for One V but I don't see any yet. We don't even have a custom recovery
well, it could be a starting point...
I can compile some good kernels,
but I will need testers since I do not have the device..
Whatsay??
Adi_Pat said:
I can compile some good kernels,
but I will need testers since I do not have the device..
Whatsay??
Click to expand...
Click to collapse
Please do... I will test it for sure.
ckpv5 said:
Please do... I will test it for sure.
Click to expand...
Click to collapse
Me too! Thanks.
Sent from my HTC One V using xda premium
Ok, I am downloading the sources now.. Will update you'll ..
I won't make a new thread till the kernel boots, I am mainly a Samsung dev so i am a bit new to HTC.. Anyways ..
Ill give you'll test kernels !
EDIT: The sources are downloaded , Exploring a few things, if time permits I will post a test build tonight or tomorrow early morning!
Cheers !
Someone please send me the kernel in stock ROM
One more thing, pull out a working config for me.
adb pull proc/config.gz
Adi_Pat said:
Someone please send me the kernel in stock ROM
One more thing, pull out a working config for me.
adb pull proc/config.gz
Click to expand...
Click to collapse
I'll upload in a short while
Here you go....
mdeejay said:
primou-ics-3.0.16-e45af48.tar.gz
primou-ics-3.0.16-e361aa7.tar.gz
http://www.htcdev.com/devcenter/downloads
Click to expand...
Click to collapse
will you make ics with sense for dhd fully functional with this kernel source????
i was waiting for fully function android 4.0 with sense...... but there was no ROM as of now.....
now only you are the ray of hope
ckpv5 said:
I'll upload in a short while
Here you go....
Click to expand...
Click to collapse
Ah! Thanks, now give me some time, I'll come up with something
Having some issue extracting initramfs from zImage, I am getting an empty directory.
Adi_Pat said:
Ah! Thanks, now give me some time, I'll come up with something
Click to expand...
Click to collapse
Take your time... will check this thread tomorrow...
Adi_Pat said:
Ah! Thanks, now give me some time, I'll come up with something
Having some issue extracting initramfs from zImage, I am getting an empty directory.
Click to expand...
Click to collapse
hey adi_pat,what say abt a little bit of company from me,eh?
Bring it on! One of my best fellow devs!
I got compiled zImage and modules, but I am not getting this initramfs thing.. Its usually built into zImage..
EDIT: Someone please test the compiled zImage and let me know
PS: Its a plain compiled kernel, let me know if it is booting.
Hello, i saw that you guys got source and thought that maybe an article on the XDA Portal would help get you guys some more dev support.
Link!
http://www.xda-developers.com/android/htc-one-v-ruu-and-kernel-source-released/
I wrote about the RUU as well Hope it helps!
can someone start cm9 port ?
To build CM9 you need to have a device tree which takes a while
Sent from my Desire S
n1kolaa said:
can someone start cm9 port ?
Click to expand...
Click to collapse
Can someone please test the kernel ? Without prompt user feedback how will we continue development ?
Testers please keep your stock kernel handy as a backup.
Adi_Pat said:
Can someone please test the kernel ? Without prompt user feedback how will we continue development ?
Testers please keep your stock kernel handy as a backup.
Click to expand...
Click to collapse
Downloaded the test kernel but I can only test and give feedback in next 9 hrs when I'm at home
Meantime, any info what we can expect from the test kernel ? Or you want to know if it boots ok ?
ckpv5 said:
Downloaded the test kernel but I can only test and give feedback in next 9 hrs when I'm at home
Meantime, any info what we can expect from the test kernel ? Or you want to know if it boots ok ?
Click to expand...
Click to collapse
Yeah I just need to know if it boots..
I'll go slow..
These are untested by me as they failed to flash on Omni/DU (LVM) - If anybody else wants to report back, that would be great. These have not exactly been advertised so please don't complain to the developer or to myself.
sensei R72
sensei R74.1
I have no other information besides what is available from this thread
All credits go to @RIPng
uppon2 said:
These are untested by me as they failed to flash on Omni/DU (LVM) - If anybody else wants to report back, that would be great. These have not exactly been advertised so please don't complain to the developer or to myself.
Click to expand...
Click to collapse
Did you ported this kernel?
dextructor said:
Did you ported this kernel?
Click to expand...
Click to collapse
Negative. I'm just a bearer off gifts
If you would like fixes I can try to help out and maintain a variant for this. Let me know please!
RIPng said:
If you would like fixes I can try to help out and maintain a variant for this. Let me know please!
Click to expand...
Click to collapse
Of course we would like fixes! It would be great if you can support Find7a and Find7
Doomboss said:
Of course we would like fixes! It would be great if you can support Find7a and Find7
Click to expand...
Click to collapse
I need someone who knows if these devices use the same base and everything to chat me on hangouts [email protected]
EDIT: I am still waiting if someone is able to assist.
How knowledgeable would the person have to be?
I can't believe people aren't jumping at the chance to help. We don't have a dedicated kernel dev at all for find7/s/a
It's not that I don't want to help, but I don't think I know enough to help.
But, I think I read it somewhere that the CM11 for Find 7 does used a kernel based on the Oneplus One CM11 kernel.
I hope @Entropy512 or maybe @maxwen can help
I know @ayysir used Franco for a short bit on PA. Outside of there you may have better luck on Oppoforums.
Can anybody help me? I cant flash this zip!
Everyone I am sorry, I wasn;t being notified of any updates on this thread, I now officially support Find 7/7a, but they are blind builds for the time being.
See here for more information
Hi I want to compile the Kernel myself.
Can't find source code
James T. Kirk said:
Hi I want to compile the Kernel myself.
Can't find source code
Click to expand...
Click to collapse
You sure you checked this thread already? http://forum.xda-developers.com/find-7/find7-development/kernel-sensei-kernel-t2938132
Yes but there is only the source code for the OnePlusOne and Nexus 6.
James T. Kirk said:
Yes but there is only the source code for the OnePlusOne and Nexus 6.
Click to expand...
Click to collapse
Hmm my bad, I thought I saw the find7 branch in the OnePlusOne repository on github before
Download the hold here Roll-L3-BE - custom firmware rom -> <MODERATOR EDITED>
Odexed. Rooted.
Installation Instructions:
- install a custom recovery...
- download Roll-L3-BE rom zip
- reboot recovery
- Install Roll-L3-BE with Full Wipe
- reboot device
XDA:DevDB Information
Roll-L3-BE, ROM for the Samsung Galaxy S 4
Contributors
trellurr
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Stable
Created 2016-01-29
Last Updated 2016-02-04
It's an Imperium Rom copy? XD
jcandgxd said:
It's an Imperium Rom copy? XD
Click to expand...
Click to collapse
Yes, I'm a fan of the Imperium.
So what are the changes that you made ? Only root and changed kernel ?
rapttorx said:
So what are the changes that you made ? Only root and changed kernel ?
Click to expand...
Click to collapse
Yes. Do not kick me a lot, this is my first hack I'm new and just learning
trellurr said:
Yes. Do not kick me a lot, this is my first hack I'm new and just learning
Click to expand...
Click to collapse
No, its fine, just wanted to make sure. Actually a lot of ppl prefer just the stock prerooted and with a customizable kernel.
rapttorx said:
No, its fine, just wanted to make sure. Actually a lot of ppl prefer just the stock prerooted and with a customizable kernel.
Click to expand...
Click to collapse
:highfive: And yes, I, too, among those people. I'm not a fan of big changes.
Your this guy yeah?
http://forum.xda-developers.com/galaxy-s4/i9505-develop/roll-ser-i9505f2-t3173578
DSA said:
Your this guy yeah?
http://forum.xda-developers.com/galaxy-s4/i9505-develop/roll-ser-i9505f2-t3173578
Click to expand...
Click to collapse
No.
Why did not I seen your firmware? BlackBoxRoms. That this firmware upgrade http://forum.xda-developers.com/gal...-untouched-google-play-edition-5-1-t3198177:p
trellurr said:
No.
Why did not I seen your firmware? BlackBoxRoms. That this firmware upgrade http://forum.xda-developers.com/gal...-untouched-google-play-edition-5-1-t3198177:p
Click to expand...
Click to collapse
very coincidental you name your roms exactly the same...
i dont get the rest of what you wrote..it looks like you may be accusing me of basing blackbox off the rom you linked..
DSA said:
very coincidental you name your roms exactly the same...
i dont get the rest of what you wrote..it looks like you may be accusing me of basing blackbox off the rom you linked..
Click to expand...
Click to collapse
I'm not lying, I am writing the truth.:highfive:
the core to do this firmware.
http://forum.xda-developers.com/gal...-untouched-google-play-edition-5-1-t3198177:p
trellurr said:
I'm not lying, I am writing the truth.:highfive:
the core to do this firmware.
http://forum.xda-developers.com/gal...-untouched-google-play-edition-5-1-t3198177:p
Click to expand...
Click to collapse
You do understand my ROM is built from source don't you
Do you know what source built means?
How can a source built marshmallow ROM be based off a pre built lollipop ROM?
You really have no clue what you are talking about and I don't trust you or your 'roms' either
You got banned once, I can guarantee it will happen again
DSA said:
You do understand my ROM is built from source don't you
Do you know what source built means?
How can a source built marshmallow ROM be based off a pre built lollipop ROM?
You really have no clue what you are talking about and I don't trust you or your 'roms' either
You got banned once, I can guarantee it will happen again
Click to expand...
Click to collapse
Kernel for firmware do 5.1.
trellurr said:
Kernel for firmware do 5.1.
Click to expand...
Click to collapse
What are you talking about? I'm out..
Strange that your username is the opposite of rrullert though..
gsal said:
Strange that your username is the opposite of rrullert though..
Click to expand...
Click to collapse
I was thinking the same [emoji2]
Enviado desde mi GT-I9505 mediante Tapatalk
You guys are correct :good:
I called him out on it, he has no defence so tried to claim I kanged something...would you really wanna use something this guy provides?
DSA said:
What are you talking about? I'm out..
Click to expand...
Click to collapse
the kernel to make the hands 5.1 GPE untouched. For cyanogen did make for 5.1.
trellurr said:
the kernel to make the hands 5.1 GPE untouched. For cyanogen did make for 5.1.
Click to expand...
Click to collapse
Lol
Your attempt to discredit me by claiming I've kanged a gpe kernel to use on my cm rom is hilarious, thanks for making me smile today
You really have no clue what you are talking about or doing, and I advise anyone reading this thread NOT to flash this ROM or anything else he provides (which is someone elses ROM and kernel repackaged, which he has been banned for already)
DSA said:
Lol
Your attempt to discredit me by claiming I've kanged a gpe kernel to use on my cm rom is hilarious, thanks for making me smile today
You really have no clue what you are talking about or doing, and I advise anyone reading this thread NOT to flash this ROM or anything else he provides (which is someone elses ROM and kernel repackaged, which he has been banned for already)
Click to expand...
Click to collapse
Do kernel.
This is a provocation to you to click on a complaint! :good:
Hello fellow XDA members, I recently purchased a Le Pro 3 and a Le S3 during the flash sale and would like to use Cyanogenmod on my devices. I was wondering if anyone on this forum has ever ported a ROM before as I have not, and only know about the CM porting guide and opensource.le.com for the kernel source. If anyone has any tips or would like to assist me in porting CM13 to the Pro 3 please reply to this thread or PM me. Thanks, and let's hope LeEco releases the source soon!
Love to help but this isn't my department ????. But we should probably see more support in a couple more days once they start arriving here
Just out of curiousity, what exactly had you hoped to achieve with this post? If you're interested in porting, ideally you should at least be able to build a rom (for another pre-existing device)... and then you'll have to hunt down help on the CM forums and then eventually IRC.
Talking about this on XDA is pointless.
dr4stic said:
Just out of curiousity, what exactly had you hoped to achieve with this post? If you're interested in porting, ideally you should at least be able to build a rom (for another pre-existing device)... and then you'll have to hunt down help on the CM forums and then eventually IRC.
Talking about this on XDA is pointless.
Click to expand...
Click to collapse
The purpose of my post was to see if anyone in the XDA community had experience porting a ROM to a new device, and if they'd be interested in helping me. I have read through a few guides and understanding building a ROM, but am struggling to find what I must "merge." From what I've found so far, I'll need to edit/merge the directories in /system/libs and edit the kernel?
limitlesscodes said:
The purpose of my post was to see if anyone in the XDA community had experience porting a ROM to a new device, and if they'd be interested in helping me. I have read through a few guides and understanding building a ROM, but am struggling to find what I must "merge." From what I've found so far, I'll need to edit/merge the directories in /system/libs and edit the kernel?
Click to expand...
Click to collapse
No, it's far more complicated than that. You'll need a copy of the kernel for sure, but you'll also need a device definition. You can use the op3's device as a template, it's probably the best example of an msm8996 device you can have.
You really should be checking into the CM forums. CM people are pretty uppity about not supporting things on XDA. They also don't tend to help. Even as a developer I find it difficult sometimes to get their attention. Your best bet is to go to them if you want their help. Good luck.
dr4stic said:
No, it's far more complicated than that. You'll need a copy of the kernel for sure, but you'll also need a device definition. You can use the op3's device as a template, it's probably the best example of an msm8996 device you can have.
You really should be checking into the CM forums. CM people are pretty uppity about not supporting things on XDA. They also don't tend to help. Even as a developer I find it difficult sometimes to get their attention. Your best bet is to go to them if you want their help. Good luck.
Click to expand...
Click to collapse
Yeah, I understand. I also found out that it will be about a month until LeEco officially releases all of the source.
limitlesscodes said:
Yeah, I understand. I also found out that it will be about a month until LeEco officially releases all of the source.
Click to expand...
Click to collapse
Where did you get that information from? They "accidentally" released kernel sources not too long ago and seemingly withdrew it. I got a copy of them and that's what I've been working with. I don't have a device to verify if any of it works.
dr4stic said:
Where did you get that information from? They "accidentally" released kernel sources not too long ago and seemingly withdrew it. I got a copy of them and that's what I've been working with. I don't have a device to verify if any of it works.
Click to expand...
Click to collapse
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
limitlesscodes said:
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
Click to expand...
Click to collapse
Not a lot. I've identified the CAF tag the sources are based on and have been working to separate the relevant LeEco mods from the less relevant ones. I've also been attempting to remove the leeco specific things from the drivers that i'm keeping since they're a horrible mess and CM won't be able to make use of them anyway. I've also been finding the appropriate open versions of the drivers and taking the latest ones instead.
The mods from LeEco seem to be a mess, the dmesg output I got from a user on the chinese model (the x720) had segfaults from the modifications just after boot. The logcats are so full of errors I was unable to get the user to send me a full logcat from boot.
Interestingly enough, the chinese system rom looks like it came from a Le Max2. This makes sense since it's LeEco's first msm8996 device, and the Le Pro3 is the second one. I imagine the kernel sources work across a number of the 8996's.
Can you send me the link to where you got the open drivers.
limitlesscodes said:
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
Click to expand...
Click to collapse
Please share the sources.
Sent from my LEX727 using Tapatalk
ceo.mtcl said:
Please share the sources.
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
here
limitlesscodes said:
here
Click to expand...
Click to collapse
Thank you so much!
limitlesscodes said:
here
Click to expand...
Click to collapse
This is not a International version? Its USA version? Where is the International source code?
Here's a mega mirror in case the drive link goes down.
https://mega.nz/#!7Ek3HYaB!1H0WibOjwlg1P0vaaJ2qcrAAsl-PjruB9-_X1ECqfnw
Wish i could help more, but it looks like the kernel source is in there too, perhaps that means a fully functional cm13 rom that works AT LEAST as well as the stock rom. VERY EXCITE!
+1
I'm also waiting for CM13.
csyann said:
I'm also waiting for CM13.
Click to expand...
Click to collapse
:good:
csyann said:
I'm also waiting for CM13.
Click to expand...
Click to collapse
giogio1 said:
:good:
Click to expand...
Click to collapse
Waiting for CM 14.1
http://opensource.le.com
I Want A Leanr That How Build A Custom Rom For One Plus 5t
Deepusingh786 said:
I Want A Leanr That How Build A Custom Rom For One Plus 5t
Click to expand...
Click to collapse
Learn java first bud
Deepusingh786 said:
I Want A Leanr That How Build A Custom Rom For One Plus 5t
Click to expand...
Click to collapse
That was the dumbest answer, u don't need to learn Java first, lol. Hines u can learn Java in the process. This guide is all u need to build, https://raw.githubusercontent.com/nathanchance/Android-Tools/master/Guides/Building_AOSP.txt.
You have to sync the CAF Branch for 5T on whatever ROM you choose. I didn't Know first thing about building, and this guide got me successful build. If u fillow the guide toul have zero issues.
yung40oz84 said:
That was the dumbest answer, u don't need to learn Java first, lol. Hines u can learn Java in the process. This guide is all u need to build, https://raw.githubusercontent.com/nathanchance/Android-Tools/master/Guides/Building_AOSP.txt.
You have to sync the CAF Branch for 5T on whatever ROM you choose. I didn't Know first thing about building, and this guide got me successful build. If u fillow the guide toul have zero issues.
Click to expand...
Click to collapse
The link you posted doesn't work but it was simple to find an alternative on Google. I've always wondered how to build a ROM so it was interesting to look at, maybe I'll give it a shot sometime one I get Linux dual-booting on my laptop. Thanks!
yung40oz84 said:
That was the dumbest answer, u don't need to learn Java first, lol. Hines u can learn Java in the process. This guide is all u need to build, https://raw.githubusercontent.com/nathanchance/Android-Tools/master/Guides/Building_AOSP.txt.
You have to sync the CAF Branch for 5T on whatever ROM you choose. I didn't Know first thing about building, and this guide got me successful build. If u fillow the guide toul have zero issues.
Click to expand...
Click to collapse
link dead, update pls,
I build GZOSP and I hardly know Java.
Mikxx said:
link dead, update pls,
Click to expand...
Click to collapse
haha if you look at the URL there is a " . " on the end that shouldn't be there. If you cant solve that simple problem I wouldn't recommend getting into building roms since that is 90% problem solving and you do need some knowledge about basic stuff.
Misanful said:
haha if you look at the URL there is a " . " on the end that shouldn't be there. If you cant solve that simple problem I wouldn't recommend getting into building roms since that is 90% problem solving and you do need some knowledge about basic stuff.
Click to expand...
Click to collapse
hahaha lol link was clickable so i assumed it woud be the right one lol, anyways thanks for the clarification