Hi guys, sorry for my bad english.
Since today can't sinchronize my ppc with wm 5.0.
Here's the problem: when I pug it with usb cable, nothing happens.The orange light is on, the phone is in charge but nothing happens.Usually when I connect the phone I can see windows looking for ip address, and the activesynch shows... but this is not going to happening anymore.
I tried to reistall activesinch, I've cleaned the registry and i tried to connect it with others software.Still nothing.
Firewall is disabled.Any solutions?
Thank you in advance.
Zealot87 said:
Here's the problem: when I pug it with usb cable, nothing happens.The orange light is on, the phone is in charge but nothing happens.Usually when I connect the phone I can see windows looking for ip address, and the activesynch shows... but this is not going to happening anymore.
Click to expand...
Click to collapse
I had the same problem sometime ago. I've changed the wire first but nothing happened. My speaker, my Mic was dead and I could switch on FMRadio without the Hands-free!!!
What I did...??? I updated my mobile's Radio with 3.39.90 Version. How can you do this without active sync???
1. Remove SIM Card and Storage Card from the Mobile.
2. Press and Hold the Right Button (Recording Button) and Press together the Power Button. You will be in the Bootloader Screen. Try to update the Radio first.
3. Check it if it's working ok.
2nd way...
1. Copy the official ROM of WindowsMobile to the Storage Card.
2. Press Right Button (you know the Voice Rec) and holding that press the Power Button...
the mobile will be bootloader mode and will try to install the official ROM from the Storage Card...
wait a bit and then when it finish, check it if it is working properly!
Hope to help... waiting to "hear" sorry, to read good news
I have the same problem i cant sincronize the pda whith the activesync and i wish to change the rom. Now it's in france and i wish to change it to english, and it's locked to orange france i think. What can i make? It starts in bootloader, but the instalation from the card is not starting. thankx
le. and if i want to install something gives error 260
I had the same problem 1 month back, checked the mini usb data cable with a multimeter just to find that one of the data TX/RX wire was short with +5v wire, cable was faulty. the 1st and the last wires (+5v , -5v) were ok thats why it was charging the phone, but not connecting to pc, it was giving error unrecognised usb device.
u can also check for bent contacts at the USB mini connector on ur phone.
strange
hy guys
i´ve got a strange problem with my arte110.
for some reason i cant establish an activesync-connection,a few days ago i had some wm6.5 rom running and couldnt connect my device, then suddenly today (maybe because i reinstalled windows on my computer yesterday, i dont know) i was able to connect the phone while in bootloader... so i flashed happy and lucky the original wm (os 5.2.1620 build 18125.0.4.2) rom i got from t-mobile austria.
now its the same problem as before, i cant connect my device, i've restartet artemis and my computer several times, i've reinstalled activesync 4.5 a million times, i've tried all available usb-ports- different usb cables (same cable works with external harddrives) and even my office-computer, and so on...
my pda is (and was allways) charging but i cant syncronize.
has anyone any idea what could cause this problem?- please don't tell me the usb port of the pda is damaged, I wouldn't want to have to fix anything in this case...
hoping for good news, McPerfuntory
[by the way, please dont judge me for spelling mistakes, i'm from austria!!!]
done
okay guys, no need to respond anymore, i got it right..
but i don't really know how i repaired that one, i disassembled the devive cleaned everthing in there and cleaned the usb connector..
..works again
Hello to all
I have a huifei 4.4.4 system and both the rear USB ports have stopped working. 5V on the ports is working OK. SD cards are working fine. Wifi and bluetooth is working fine. I tried to update mcu with newer version but no luck. I have been playing around with different music players and car service app. System was rooted at the time they stopped working. I have also tried factory reset but still not working. Not sure if I upset something while playing around. Hoping someone out there can help me re enable the ports. Thanks in advance for any help.
I'm experiencing an issue like that: Whenever I'm listening to mp3 files via USB it stops playing after some time. At that point I am not able to browse the USB stick - it simply stuck. Only a device restart helps at that point.
But playing mp3 via sd card works fine!
Thats what I'm doing. SD card works fine for me. My usb's are completely dead. Nothing is detected when I plug in.
Sent from my SM-G900I using Tapatalk
Mine front one too (back ones I didnt tested yet).
Is there many of us with USB problems? Any fix? I was searching HW thread but didn't found much there.
There is just some hint on enabling "adb debugging" ("adbon" password in Factory Settings or option in Debugging Options on rooted ROMs) but that didn't worked for me.
Mine isn't completely broken. It only stucks at some point - after booting, both back USB ports are working fine...
I've tried that. Still not working. You think if i use different rom it might reset something snd get it working again? You running standard rom or have you updated?
Sent from my SM-G900I using Tapatalk
It standard rooted... But as I mentioned: its not fully working on my unit, too.
I had a problem where the WiFi would shutoff and couldn't be turned on until a reset. Ended up being the USB power due to a bug in the MCU software. If you haven't already tried the MCU update, it might be worth a shot.
I had that too where i couldn't turn the wifi on. For some reason the wifi is working again. I checked 5v supply on usb port. Supply seems ok.
Sent from my SM-G900I using Tapatalk
None USB ports working in my Android HU.. they just charge but don't read
Hello friends!
I bought an Android Head Unit MIB4 (SC9853I) for my VW Golf 7:
https://www.alibaba.com/product-det...l?spm=a2700.7724838.2017115.25.71201862OEMWlE
Everything works fine but I'm having problems with the USB ports.. the 3 usb ports charge my phone but they don't read any usb drive with music. I don't know if this is a hardware or software problem.. I've tried formatting several usb drives (4gb , 1gb, 64gb) in fat32 but none of them are read by any usb port of the headunit.
Please, help me! and thanks in advance..
---------- Post added at 08:48 PM ---------- Previous post was at 08:40 PM ----------
Hello friends!
I bought an Android Head Unit MIB4 (SC9853I) for my VW Golf 7:
https://www.alibaba.com/product-detail/Hot-selling-android-system-octa-core_62185754927.html?spm=a2700.7724838.2017115.25.71201862OEMWlE
Everything works fine but I'm having problems with the USB ports.. the 3 usb ports charge my phone but they don't read any usb drive with music. I don't know if this is a hardware or software problem.. I've tried formatting several usb drives (4gb , 1gb, 64gb) in fat32 but none of them are read by any usb port of the headunit.
Please, help me! and thanks in advance..
Majelogo said:
Hello friends!
I bought an Android Head Unit MIB4 (SC9853I) for my VW Golf 7:
https://www.alibaba.com/product-det...l?spm=a2700.7724838.2017115.25.71201862OEMWlE
Everything works fine but I'm having problems with the USB ports.. the 3 usb ports charge my phone but they don't read any usb drive with music. I don't know if this is a hardware or software problem.. I've tried formatting several usb drives (4gb , 1gb, 64gb) in fat32 but none of them are read by any usb port of the headunit.
Please, help me! and thanks in advance..
---------- Post added at 08:48 PM ---------- Previous post was at 08:40 PM ----------
Hello friends!
I bought an Android Head Unit MIB4 (SC9853I) for my VW Golf 7:
https://www.alibaba.com/product-det...l?spm=a2700.7724838.2017115.25.71201862OEMWlE
Everything works fine but I'm having problems with the USB ports.. the 3 usb ports charge my phone but they don't read any usb drive with music. I don't know if this is a hardware or software problem.. I've tried formatting several usb drives (4gb , 1gb, 64gb) in fat32 but none of them are read by any usb port of the headunit.
Please, help me! and thanks in advance..
Click to expand...
Click to collapse
I Am alose facing same issue.... tried 8 GB flash drive in FAT32 and NTFS and ExFAt.. none of them working... Any idea ?
Same here, I had a problem with android auto, the Dasaita vendor sent me this message:
Here the latest link with system and updatesX6 android 10 （1113） https://drive.google.com/file/d/1rO-wBK8rvVZsXT_5IjN3MyuMY00utZZX/view?usp=sharing Please download, then ONLY put the update.zip file to the USB (format the USB firstly). Finally, click the setting > system > system updates to update it. Here the latest link with MCU and updates 3.67 MCU https://drive.google.com/file/d/1VHmt2nffbQdc2iHiy_Pl3rNwLXN4cVea/view?usp=sharing Please download then ONLY put IMG file to the USB (format the USB firstly). Finally, click the setting > system > MCU update to update it. Hope the update can help you fix the issue. How to update the system:
(If you can't download the file, please change the Explorer or computer to do it. If it ask you for the Credit card id, just create the sendspace account then you can download it, No need to write your Credit card id information! )
After updating everything, my external USB ports don't work anymore.
Any clues on how to fix it?
magoanubi said:
Same here, I had a problem with android auto, the Dasaita vendor sent me this message:
Here the latest link with system and updatesX6 android 10 （1113） https://drive.google.com/file/d/1rO-wBK8rvVZsXT_5IjN3MyuMY00utZZX/view?usp=sharing Please download, then ONLY put the update.zip file to the USB (format the USB firstly). Finally, click the setting > system > system updates to update it. Here the latest link with MCU and updates 3.67 MCU https://drive.google.com/file/d/1VHmt2nffbQdc2iHiy_Pl3rNwLXN4cVea/view?usp=sharing Please download then ONLY put IMG file to the USB (format the USB firstly). Finally, click the setting > system > MCU update to update it. Hope the update can help you fix the issue. How to update the system:
(If you can't download the file, please change the Explorer or computer to do it. If it ask you for the Credit card id, just create the sendspace account then you can download it, No need to write your Credit card id information! )
After updating everything, my external USB ports don't work anymore.
Any clues on how to fix it?
Click to expand...
Click to collapse
My USB ports only charge on my Px6 and no updates seem to fix it. I don’t have usb debugging options either. Not sure what to do to fix. Any suggestions?
Cbenton82 said:
My USB ports only charge on my Px6 and no updates seem to fix it. I don’t have usb debugging options either. Not sure what to do to fix. Any suggestions?
Click to expand...
Click to collapse
Perhaps posting in correct forum might yeild responses. The last few posts none of the units are MTCB.
Cbenton82 said:
My USB ports only charge on my Px6 and no updates seem to fix it. I don’t have usb debugging options either. Not sure what to do to fix. Any suggestions?
Click to expand...
Click to collapse
I have same problem. Did you find a solution?
famepa said:
I have same problem. Did you find a solution?
Click to expand...
Click to collapse
Far out. Posting in wrong forum.
Hi .
I have a new A5 2017 with Nougat and last update available, all is working ok but Android auto doesn't work with my car , app android auto has been installed and works ok using the phone display but not using my car radio system,this is the first time I will use it , I have been using carplay until yesterday.
When I connect to my car phone is not detected via USB ,.
Anyone can confirm that A5 2017 with NOUGAT works well ??????
EDIT: i enabled the usb debugging and changing between mode MTP mode, RNDIS , connect correcty and I can see android auto in my car later it disconnect by itself.
SOLVED!!! using the samsung cable works perfectly without activate usb debugging, just as default settings.
Br
my probleme with samsung A7 2018 android 8.0 and not compatible with android auto????
Hello. I've tried to connect Huawei E3372 dongle to Joying Head Unit running Android 8.0.0 PX5 Octa Core. When I plugged it in it wasn't detected by the Head Unit. So after looking for a solution online I've rooted my head unit and installed PPP Widget 3, but still the dongle isn't detected by the head unit and PPP Widget 3. A light on the dongle flashes when it's plugged into the head unit the same way it's flashing when plugged into a PC. When I plug the dongle into a PC it opens up a browser window with HiLink.
I've read the PPP Widget 3 description in Play Store where it said it was tested with Huawei E3372, so is the head unit the problem?
Is there anything that can be done to make it work or should I purchase a different dongle or maybe go for a Mobile WiFi Router?
I would really appreciate it if someone could help me out what to do next.
Also I'm sorry if I posted in the wrong section of the forum.
Try to install moded firmware for 3372. Then u can switch your modem to ndis mode and voila.it works
I have e3372h and it works like a charm
I did the needle method, but every guide I found on the internet either says to compile the balong utility and balong flash (I have no clue how to do it) or Linux is required. I'm on Windows 10.
Edit: It turned out the utility didn't required compiling, but even after following a guide (i can't post links) E3372 is still in HiLink mode. After running balong utility all I got is question marks in the command prompt.
Hello i I have a problem I wanted to use Android Tools to fix the crashed navi s160. The problem is that after connecting the USB cable to the 4 pin socket in navi, the computer does not see the device. I tried to connect with the RESET button pressed but also without result. The CPU is a Rockchip 3188. Is there a jumper on the disc or something I'm doing wrong?