I followed the steps to use blankflash but the phone stops at identifying cpu
Related
Hello, after running the LP downgrade script provided in AICP thread to downgrade my bootloader to LP, it hangs at ASUS logo (splashscreen, not bootanimation). Before that I was running Dirty Unicorn. After that, i used xFSTK to unbrick and it reboots to fastboot. But it shows serial number 01234....DEF (i know it's normal) and product name changed to Z00A while mine is Z008. I'm sure i used the correct xFSTK files from amtech.vn. I used AFT to flash, the fastboot status line show different commands and stopped at RESULT: OK. After that, it doesn't flash anymore despite AFT still running. When I disconnected my Z008 and rebooted to bootloader again (@fanfan54) mentioned it in his unbricking thread), it shows USB logo and I unbrick again like above. After AFT and RESULT: OK, I disconnect and rebooted to fastboot, the serial number still like that and device was Z00A, not Z008. I tried AFT again and disconnect, reboot and now it shows USB logo!!
I unbrick by xFSTK then i loops the above steps, still can't unbrick. Now i plugged it to charge, it shows USB logo and the screen keeps on, so it heat up and annoy me very much
Please reply me soon. Thanks in advance:crying::crying:
I solved myself by this thread: http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
I have a lenovo vibe k5 plus smartphone, which i erased accidentally, complete emmc erased. Now my phone won't start. It is neither booted into fastboot nor adb, not even recovery. When i plug it into my PC, red LED is on and it is automatically detected as Qualcomm HS-USB QDLoader 9008. I have tried qfil, Tool studio, QDloader, and even Miflash,but nothing worked.
Qfil says: QSahara error,
Tool studio: MPRG.mbn download failed,
QDLoader: send result,
Miflash: Reached end packet, can not receive hello packet.
if anyone can help me please tell me a proper way to recover/unbrick my phone Thanks in advance.
sahirali920 said:
I have a lenovo vibe k5 plus smartphone, which i erased accidentally, complete emmc erased. Now my phone won't start. It is neither booted into fastboot nor adb, not even recovery. When i plug it into my PC, red LED is on and it is automatically detected as Qualcomm HS-USB QDLoader 9008. I have tried qfil, Tool studio, QDloader, and even Miflash,but nothing worked.
Qfil says: QSahara error,
Tool studio: MPRG.mbn download failed,
QDLoader: send result,
Miflash: Reached end packet, can not receive hello packet.
if anyone can help me please tell me a proper way to recover/unbrick my phone Thanks in advance.
Click to expand...
Click to collapse
Perdonnaly I would suggest QFil :
- remove the battery
- put it back
- push volume + and - and plug your phone at the same time
- be careful to use qpst 2.7.430 (you can find it on other threads)
Sent from my Lenovo Vibe K5 Plus using XDA Labs
I have tried qfil of qpst 2.7.422, 2.7.430, 2.7.437 and 2.7.472 but nothing worked.
My p2 suddenly stopped ,no recovery, no fastboot
I followed the steps to use blankflash but my phone stops at identifying cpu
Can anyone help please?
Hi durning flashing factory image i have bricked my phone. I did factory reset in recovery mode and after that i get stuck in bootloop, so i tryied flash factory img via fastboot not the first time. Then i get stuck in bootloop and couldn't access recovery mode or download mode. Phone didn`t wake up after few reboots when i used flash_all command(i did this many times with no problem) so i unpluged usb cable after few munutes if "waiting for device". Now phone is dead and only respond is when i plug it to pc in device manager it's found now as a "Qualcomm HS-USB QDLoader 9008". I have searched all internet and there is no thread about our razer phone. The very few methods and not for razer phone. My only hope that i think my work in this situation is use backup of 'mmcblk0.img' or "debrick.img" from a working device and try to flash it using sd card and "Win32 Disk Imager" Could somone pleas extract mmcblk0.img from its own working razer phone and share it to me/us here? Or if you have another idea pleas tell me. Ps:sorry for my english.
Unbrick project razer phone
Hi i have found company (if you google "arykstore") that deals with hardbrick issues as mine. They just started unbrick project on razer phone after my request for help. If they rise money to obtain working razer device they will extract and provide essential filles to resurrect any hardbricked razer phone
I have the same problem, only download mode available and flaahing is not working
Hello, after flashing RROS-Q-8.6.5 from stock MIUI and forgetting to format data after flash - my phone won't boot anymore. It will just turn on backlight for a second and vibrate and then turn off. If I try to acces fastboot the same happens together with fastboot picture. I uploaded the video here
Most people report bricked phone like no screen turning on - only flashing LED light so I don't know what is the state of my device or if this ever happened to anybody and can provide tips how to solve it, I would really appreciate it.
Thanks in advance.
Follow this thread
Need Redmi note 8 firehose without authentication
My device is bricked with no fastboot. The only thing working is edl. But xiaomi has put an edl authentication for flashing. The authentication is put into prog_emmc_firehose6150_ddr.elf. Is there anyone has the firehose programming patch for...
forum.xda-developers.com