i recently bought a Erisin ES8898V, work fine, only the parking sensors dont turn off when i pull the car out of the reverse gear car but stay beeping for 5-10 sec. is there a way that they turn off immediatly when i pull the car out of the reverse gear ? because this is the way it worked before i installed the headunit.
Related
i just bought the incredible 2 and i have a nissan altima and on my last phone (blackberry tour) i would connect my phone through bluetooth in my car. Now it connects fine no problem but everytime i get a notification my phone no longer goes through the speaker in my car but my phone still says im connected through bluetooth.
and only way to get it back is to turn it off and sync back up again and pray i don't get a notification.
Any ideas?
Hi,
I have several bluetooth questions.
1. On my old TP2, once paired with BT in my car, as long as I would leave phone bluetooth on, it would auto connect every time I started my car. Nothing had to be done unless I reset the phone or turn BT off.
With ET4G, I have to manually go to BT settings and clique on my car BT to have it paired every single time I get into my car. Is that the way it works for everyone or is there a problem? It finds the car BT when I start the car, but does not auto pair.
2. I know officially Skype and Gtalk do not support BT audio out. Is there a way around? I use those apps to video chat while on the road, and on highway, speakerphone is too weak. Besides, it is located on the back of the phone, right against the windshield holder. Any ideas???
Thanks.
Mike
My BT connects every time I start my car or truck. I have a Pioneer Navigation Radio in the Car and Ford Sync in the Truck. BT has been pretty good for me so far. If you have not done so, maybe try and un-pair and re-pair it and see if that helps.
No problem here with car BT connecting automatically.
If you want Skype BT, use this: http://forum.xda-developers.com/showthread.php?t=1148708 (bonus: you can turn off annoying start up/exit sound)
I've been using my Galaxy 3 for a couple years with my car's stereo to listen to MP3s and Audio Books and hoped to continue doing the same with my new Note 4 DE.
Previously, once everything was paired up and working fine, if I turned off the car to go into a store or work or whatever, when I got back in and started the car up, after a couple seconds the bluetooth device would just continue playing where I left off.
Now, when I start the car the stereo flashes "acquiring Bluetooth data" and then for like half a second it shows the normal screen with the info on what the phone is trying to play, like track listings and all that, then instantly flashes back to the "acquiring..." message, and repeats endlessly.
I have to turn off Bluetooth on the phone for a second to get it to stop, then I re activate Bluetooth and have to either re-pair, or change the stereo source to FM/CD/etc, then back to Bluetooth, and then it will start working as intended.
This thing is brand new, all stock software except the basic root done on it.
It's not a Bluetooth or note 4 issue and maybe more of an interoperability issue. I have a Rav4 with my note 4 stock retail and it functions like you describe with automatically starting when I enter the car. It starts where I left off.
Hi all, new guy here with some problems.
I've bought a new headunit to replace my factory Skoda Stream Radio CD.
My car is an Skoda Octavia mk2 vRS year 2007, so any VW headunit should be OK in my car.
New headunit is a Joying Android 4.4.4 RK3188 with latest official firmware (June 2015).
I was trying to install it this morning for the first time and found several problems.
The most important one is the headunit doesn't power off even with my car completely shutdown and closed.
Headunit install instructions state there are two different methods to connect the headunit.
First and preferred one is using CANBUS decoder box, so headunit power is controlled through CANBUS decoder.
But if headunit doesn't power on when you turn on the car (that's happening to mine), you have to use second method: unplug CANBUS decoder box and connect ACC +12V red wires so that headunit gets powered.
With this second method the headunit starts up OK, but when i turn off the engine, take out the key or even close the car with remote control, headunit doesn't power off at all. I even tried to wait for 20 minutes but with no results. So i had to remove new headunit from the car to avoid battery drain...
I have upgraded firmware from Abril to June version so i got a new feature that allows to delay shutdown after ACC is off.
I set it to 30 seconds delay but still nothing. Headunit stays on.
I already asked to seller, and i'm waiting for an answer. But i thought maybe i could get some valuable ideas here at the forum.
Still don't understand why headunit is not powering on with CANBUS decoder connected. My car should support it, my factory Skoda Stream Radio CD is able to show climatronic info on display.
Other problems i found:
- Headunit buttons don't light even if i turn on car headlights. If i set button's colour in Settings\Elements buttons light for a pair of seconds to show new color, but then they go off again.
- I wanted to set Skoda logo at boot at Factory Settings but asks for a pin/password. Thought it was 126 but it isn't. What is the pin for Factory Settings?
- There's a slight buzzing coming from speakers when i turn on car headlights. That buzzing is not there with Skoda factory radio unit.
Long post, thanks in advance for your answers. :good:
Seems to me wrong or defected harness?
Does your car have factory amplifier? I had one that was making lot of issues. I figured out that the harness was the problem because they sent me a harness that is compatible with my factory head unit. But my car was standard trim that didnt include it. I had to cut one wire they told me to cut it. And it worked fine after that.
أرسلت من LG-D802 بإستخدام تاباتلك
Thanks for your answer Scorbion,
Seller is going to send me a new Canbus box decoder. We think it must be faulty, that's why headunit doesn't power on or power off with it. Without Canbus box, ACC coming from VW harness is not a real ACC but a +12V to battery, because VW factory radio does all through canbus, and so headunit is always connected and doesn't power off.
Will update info when i get the new canbus box from seller.
Thanks
Scorbion said:
Seems to me wrong or defected harness?
Does your car have factory amplifier? I had one that was making lot of issues. I figured out that the harness was the problem because they sent me a harness that is compatible with my factory head unit. But my car was standard trim that didnt include it. I had to cut one wire they told me to cut it. And it worked fine after that.
أرسلت من LG-D802 بإستخدام تاباتلك
Click to expand...
Click to collapse
GAF70 said:
Hi all, new guy here with some problems.
I've bought a new headunit to replace my factory Skoda Stream Radio CD.
My car is an Skoda Octavia mk2 vRS year 2007, so any VW headunit should be OK in my car.
New headunit is a Joying Android 4.4.4 RK3188 with latest official firmware (June 2015).
I was trying to install it this morning for the first time and found several problems.
The most important one is the headunit doesn't power off even with my car completely shutdown and closed.
Headunit install instructions state there are two different methods to connect the headunit.
First and preferred one is using CANBUS decoder box, so headunit power is controlled through CANBUS decoder.
But if headunit doesn't power on when you turn on the car (that's happening to mine), you have to use second method: unplug CANBUS decoder box and connect ACC +12V red wires so that headunit gets powered.
With this second method the headunit starts up OK, but when i turn off the engine, take out the key or even close the car with remote control, headunit doesn't power off at all. I even tried to wait for 20 minutes but with no results. So i had to remove new headunit from the car to avoid battery drain...
I have upgraded firmware from Abril to June version so i got a new feature that allows to delay shutdown after ACC is off.
I set it to 30 seconds delay but still nothing. Headunit stays on.
I already asked to seller, and i'm waiting for an answer. But i thought maybe i could get some valuable ideas here at the forum.
Still don't understand why headunit is not powering on with CANBUS decoder connected. My car should support it, my factory Skoda Stream Radio CD is able to show climatronic info on display.
Other problems i found:
- Headunit buttons don't light even if i turn on car headlights. If i set button's colour in Settings\Elements buttons light for a pair of seconds to show new color, but then they go off again.
- I wanted to set Skoda logo at boot at Factory Settings but asks for a pin/password. Thought it was 126 but it isn't. What is the pin for Factory Settings?
- There's a slight buzzing coming from speakers when i turn on car headlights. That buzzing is not there with Skoda factory radio unit.
Long post, thanks in advance for your answers. :good:
Click to expand...
Click to collapse
i have the same problem. can u fix it?
Did you solve this canbus problem?
Yes, new can bus decoder did the trick.
Long time ago though...
Hardware solution trumps everything
Had the same issue. Im also waiting for the supplier to respond. In the meantime, I just pulled the acc pin off the box and connected the radio to cig. lighter possitive. Works.
hI, after get in the car to start driving, in some cases the subwoofer just dont get signal from the unit, the only thing that makes it come back is to unplug the main radio fuse ( in the car ) wait few seconds and plug in back. ( Then start the car/ Ignition again ) , reset button makes subwoofer pop and after the restart still no sound, all other outputs like front/rear RCA outputs and front/rear speaker unit amplifer working fine always
I check RCA OUTPUT when i get the problem and there is not signal, it's like it's muted, this is happening like 1 time per week, because i have it on auto sleep mode, the unit doesn't power off when I cut the ignition so that is the reason I need to remove the fuse, another workarround is to put power mode to 1 minute, cut the ignition, wait 1 minute to get sure unit is totally off and start again, problem solved but...
Android 9 20190815
MTCE_GS_V3.30_4
Gracias!
Did you find solution ? i have updated my MTCE_GS_V2.78_3 to MTCE_GS_V3.44 and my subwoofer stopped playing... PX5 DSP unit.