Develop Bugs

Stuck on Mi-Logo after GSI installation

Hey guys,
I have recently bought my "Whyred" (4/64 global) and have already unlocked the bootloader.
After switching to Miui 10 global developer rom (with official MiFlash Tool) I wanted to test some custom roms. Therefore I have enabled the developer options, USB-Debugging and OEM Unlock. After this I have booted TWRP 3.2.2.0 with fastboot and flashed the TWRP image to the phone via the booted recovery. Followed by the no-verity-opt-zip (6.0) and Magisk v16.7 to root the phone.
On this basis I went back to the recovery and did a factory reset, followed by an advanced wipe of dalvik, cache, data, system and vendor. Afterwards I have moved the whyred-treble-vendor (zip-file) and the PixelExperience GSI to my phone. First I have flashed the vendor-zip and then switched to image and flashed the GSI as system-image.
And now comes the problem: when I try to reboot to the system it always states "No Os installed". By wiping the cache and data again, I am able to boot to the system, but the phone is stucked on the Mi-Logo
After recovering my phone with the MiFlash Tool (Miui 10 global developer rom), I have tried to flash the GSI in different ways according to a lot of guides I have found in the net, but nothing is working. All methods are leading to the same result: my phone stucks on Mi-Logo
Could anyone of you give me a hint about what I am doing wrong?
Thank you!
Best regards,
nkl

At a guess with wiping system and data. Your also removing changes done by "no-verity-opt-zip (6.0)", and since your still using the MIUI Bootloader the device won't boot the associated GSI.
Maybe try flashing/booting a Treble enabled custom rom, first and then install your GSI. Or avoid the whole Treble thing and just use a custom rom.
You may get more assistance in Treble specific threads/forums.

corkiejp said:
At a guess with wiping system and data. Your also removing changes done by "no-verity-opt-zip (6.0)", and since your still using the MIUI Bootloader the device won't boot the associated GSI.
Maybe try flashing/booting a Treble enabled custom rom, first and then install your GSI. Or avoid the whole Treble thing and just use a custom rom.
You may get more assistance in Treble specific threads/forums.
Click to expand...
Click to collapse
Hey,
Thank you for your quick reaction!
But did I get something wrong? Doing a factory reset and then doing an advanced wipe of dalvik, cache, data, system and vendor is more or less an essential part of all the guides out there?
So you think, I should try to flash for example LineageOS first and then take an approach on the GSI? And which steps should I take? Should I flash no-verity-opt and Magisk under Miui 10 global dev first and then flash custom, i.e. LineageOS? Or should I flash LineageOS first (on a fresh Miui dev rom) and then no-verity-opt and Magisk?
Thanks!

@nkl0806 After installing the GSI while using MIUI as the base you could try flashing no-verity-opt before trying to boot.
no-verity-opt is only required on MIUI based roms (or in your case with a GSI).
Flash a custom rom and boot it. Don't worry about magisk etc.
Then install your GSI and boot it, avoid flashing magisk or gapps.
Once it boots, go back and install magisk and gapps etc and wipe data.
Hopefully then boot and setup your GSI rom.
Also make sure your using a Treble enabled TWRP!
Noob guide to install GSI on whyred
Again look for support in Treble Threads/Forums, I haven't experiment with it, so only going by what I have read.

corkiejp said:
@nkl0806 After installing the GSI while using MIUI as the base you could try flashing no-verity-opt before trying to boot.
no-verity-opt is only required on MIUI based roms (or in your case with a GSI).
Flash a custom rom and boot it. Don't worry about magisk etc.
Then install your GSI and boot it, avoid flashing magisk or gapps.
Once it boots, go back and install magisk and gapps etc and wipe data.
Hopefully then boot and setup your GSI rom.
Also make sure your using a Treble enabled TWRP!
Noob guide to install GSI on whyred
Again look for support in Treble Threads/Forums, I haven't experiment with it, so only going by what I have read.
Click to expand...
Click to collapse
Thank you!
I have also followed this noob guide to flash the GSI, but it did not work out. Maybe I should really skip the Treble stuff and just use the normal custom rom!
I will try to flash the PixelExperience rom and not the GSI - or maybe follow another Guide and flash the Mokee rom first as a base for the GSI.
Thanks again!

Bliss Rom Pie On Realme2pro

I tried bliss rom pie on realme2pro.Here is some screenshot link-
https://imgur.com/rBKNRQQ
https://imgur.com/Q7g68mR
https://imgur.com/bEKYvS8
https://imgur.com/nDkrhiH
https://imgur.com/mddj5yk
https://imgur.com/xfN23Yp
Anyone tried yet?please try and let me know is it suitable for our realme2pro or not.
bliss rom gsi pie arm64 a only
link- https://www.xda-developers.com/bliss-roms-android-pie-gsi-project-treble-release/

it booted fine

Is fp working in this and the gcam??

No brother,fp not working

I tried A only using TWRP (latest version), but it just hangs at the realme logo then reboots back to recovery.
Note: even though I flashed the img to the system partition it complained no OS was installed.
Prior to that I had done a factory wipe and then a system wipe.
https://forum.xda-developers.com/pr.../rom-blissroms-9-0-official-4-4-2019-t3918303
11.7 A-Only Build with Gapps built in
11.8 A-Only Build Stock (without Gapps)
Both versions failed!

Many a times brother due to vendoe problem this loop happens. When this loop happens try to boot to recovery and flash vendor.img and you will be able to boot to rom

Step For Flashing-
1.latest twrp or r2x2 recovery
2.then backup
3.wipe system,vendor.userdata,cache,delvik cache for clean install
4.flash vendor zip first link- https://androidfilehost.com/?fid=1395089523397931146
5.unpack sytem image flash to system link- https://androidfilehost.com/?fid=1395089523397933944
6.wipe cache and delvik cache
7.Swipe to reboot
8.wait for few minutes it booted to bliss rom
caution-
latest system color os a.17 build vendor not worked
flash only linked vendor zip from above
then you good to go
best of luck

galibalmasanick said:
Step For Flashing-
1.latest twrp or r2x2 recovery
2.then backup
3.wipe system,vendor.userdata,cache,delvik cache for clean install
4.flash vendor zip first link- https://androidfilehost.com/?fid=1395089523397931146
5.unpack sytem image flash to system link- https://androidfilehost.com/?fid=1395089523397933944
6.wipe cache and delvik cache
7.Swipe to reboot
8.wait for few minutes it booted to bliss rom
caution-
latest system color os a.17 build vendor not worked
flash only linked vendor zip from above
then you good to go
best of luck
Click to expand...
Click to collapse
The same problem persists. It loads the REALME logo, and immediately reboots into the Bootloader.

Is vendor.zip flashed using TWRP Install? Or does it have to be flashed to "boot"?

vendor only flashable from twrp recovery

batflashholmes said:
The same problem persists. It loads the REALME logo, and immediately reboots into the Bootloader.
Click to expand...
Click to collapse
whats the variants phone are you using?
4/64 or 128ufs
indian or others
are you flashing inside any mode?
just flash vendor zip & bliss img to system and reboot,wait some time

Got it to work after flashing vendor.img
Does this require a device specific kernel to already be installed from a previous ROM? When I checked the kernel in my Realme 2 Pro it was the same kernel as what is used by device specific ROMs: 4.4.78-perf+
Can I flash a different kernel from here?
https://github.com/BlissRoms-Kernels

i am not responsible for that,you may try but recommend-no,thanks a lot

galibalmasanick said:
whats the variants phone are you using?
4/64 or 128ufs
indian or others
are you flashing inside any mode?
just flash vendor zip & bliss img to system and reboot,wait some time
Click to expand...
Click to collapse
I use a 4/64 model. Indian itself.
I did not flash inside any mode (that I know of at least).
I ended up bricking my phone completely somehow. It would show the RealMe logo, and then boot up into a blank white screen with an input bar, and keyboard. But nothing else. It refused to boot into the bootloader as well, saying that there was some error.
Also, I had tried flashing the vendor zip first, and then the bliss img. Whenever I did that though, it would show "No OS installed. Do you want to continue?"

Thanks for trying it but this isn't working on your device & I am also sorry, plz try stable rom from xda or stock rom that can be best for you,best of luck ?

cant boot os, can access twrp, fastboot

Hello all,
I tried to flash lineageos official rom, I previously had crdroid ... now the phone just wont boot and it always goes back to twrp
I also wiped a bit too many things so now it seems I am only adble to use adb sideload to try to flash things...
and XiaoMiTool unbricking didn't work maybe because I can only choose ginkgo there and not willow ?
Please if you have any idea help
Thank you

francou said:
Hello all,
I tried to flash lineageos official rom, I previously had crdroid ... now the phone just wont boot and it always goes back to twrp
I also wiped a bit too many things so now it seems I am only adble to use adb sideload to try to flash things...
and XiaoMiTool unbricking didn't work maybe because I can only choose ginkgo there and not willow ?
Please if you have any idea help
Thank you
Click to expand...
Click to collapse
Just Format Data. Not Wipe.
Note: All data will be erased.

happy bricking your device for trying flash other device rom

francou said:
Hello all,
I tried to flash lineageos official rom, I previously had crdroid ... now the phone just wont boot and it always goes back to twrp
I also wiped a bit too many things so now it seems I am only adble to use adb sideload to try to flash things...
and XiaoMiTool unbricking didn't work maybe because I can only choose ginkgo there and not willow ?
Please if you have any idea help
Thank you
Click to expand...
Click to collapse
Flash DFE if your phone is not crypted, then format data : yes
if not just format data and reboot

question about system partition

So Iam on miui 12 and I want to install lineageos , When Flashing a new custom rom Should I wipe The system partition in twrp or not ? I did some search but didn't get The right answer
Some said Yes you should and the other said no
So can anyone did an install of lineageos give the right answer ? Thanks

Ismail_M74 said:
So Iam on miui 12 and I want to install lineageos , When Flashing a new custom rom Should I wipe The system partition in twrp or not ? I did some search but didn't get The right answer
Some said Yes you should and the other said no
So can anyone did an install of lineageos give the right answer ? Thanks
Click to expand...
Click to collapse
You don't have to wipe the system partition. What you should do is doing a factory data reset to remove encryption (this will wipe your userdata partition).
If you do the exact same thing as stated on the official LOS page, that will work. If you want to keep twrp, don't do the fastboot flash boot LOS_recovery.img part but follow the other instructions.

Ismail_M74 said:
So Iam on miui 12 and I want to install lineageos , When Flashing a new custom rom Should I wipe The system partition in twrp or not ? I did some search but didn't get The right answer
Some said Yes you should and the other said no
So can anyone did an install of lineageos give the right answer ? Thanks
Click to expand...
Click to collapse
Installing Magisk on Redmi Note 8T (Willow) with Lineage OS and recovery
I am trying to get Magisk to work on my Xiaomi Redmi Note 8T with Lineage OS, but the step where I am patching the boot.img is failing. I am using LOS recovery, and I followed the instructions provided by topjohnwu [1]: because the 8T doesn't...
forum.xda-developers.com

Question System and vendor not showing up in custom recovery.

Hello,
I wanted to get lineage os on my phone but when I got to the step where I have to wipe system, data and a few other things system and vendor don't show up, I don't want to flash it without wiping them because I don't want to brick my phone.
I am almost completely new to this so any help would be very appreciated.

Which custom recovery are you using?

ace120ms said:
Which custom recovery are you using?
Click to expand...
Click to collapse
I've tried ofox and TWRP both don't show it and TWRP 3.5.1 and 3.5.2 refuse to boot also I have an xt2052-1 if that helps

Use orangefox it boots up

Krykes said:
I've tried ofox and TWRP both don't show it and TWRP 3.5.1 and 3.5.2 refuse to boot also I have an xt2052-1 if that helps
Click to expand...
Click to collapse
You have to do adb sideload it and get copy partition, join the Moto e 2020 telegram group to get it