can it be battery problem, or can it be problem with rom?
bedencic said:
can it be battery problem, or can it be problem with rom?
Click to expand...
Click to collapse
Battery, hardware, lower ARB flashed, wrong kdz flashed,...
What happens in the device manager when you connect the phone? Something like qhusb or EDL or 9008 appear?
Sent from my LG-H815 using XDA Labs
steadfasterX said:
Battery, hardware, lower ARB flashed, wrong kdz flashed,...
What happens in the device manager when you connect the phone? Something like qhusb or EDL or 9008 appear?
Click to expand...
Click to collapse
Hey mine did show qualcomm 9008 is usb in device manager I did flashed some qfil from pakphones.com
It successfully flashed black screen need help
Akash_cr7 said:
Hey mine did show qualcomm 9008 is usb in device manager I did flashed some qfil from pakphones.com
It successfully flashed black screen need help
Click to expand...
Click to collapse
It's always a good idea to flash random files from dubious places..
Sent from my OnePlus 6T using XDA Labs
Related
So....... my LG G3 had a new OTA update for T-Mobile and I was an idiot to download and install the Update(YES I WAS REALLY DUMB TO DO THAT). So when my phone restarted, it automatically went to TWRP and I couldn't boot to system. I tried everything from hard reset to fiddling with the settings. When I attempted to turn on my phone, it wouldn't turn on even with charging the phone, using the buttons, and especially when I plug my phone into my computer. It gives me Code Error 43( Unrecognized USB Device) and now I'm in a hellhole attempting to fix this device by tomorrow. I need help ASAP before I lose my mind
P.S I'm rooted with Purple Drake and using ZoneROM
Can you boot into Download mode ? (Device turned down hold Vol Up then plug in to pc)
Nope. Can't even turn on the device and keeps on saying error 43. PLEASE SOMEONE HELP ME OUT OF THIS NIGHTMARE
xmagiicsx said:
Nope. Can't even turn on the device and keeps on saying error 43. PLEASE SOMEONE HELP ME OUT OF THIS NIGHTMARE
Click to expand...
Click to collapse
Try to plug it on another usb port. And when you try to boot into download mode nothing happens ?
Yep! For two hours straight and I have all the drivers downloaded. Drivers worked perfectly until it turned off.......
I hope it turns on before tomorrow. Keeping my head up until it is fixed
http://answers.microsoft.com/en-us/...cognised/6a2a5531-8b80-4798-9aa6-ee2dcb705c7f
and if that doesn't help try to uninstall that Unknown Device from your device tree in Device Manager and install the drivers again.
That didn't work either. I believe its my LG G3 because I was fiddling with the "SD Card Partition" and it had an System Fat32 error and it shut my phone off completely and now it won't turn on after that. Is there a way to reset or reverse my Partition settings?
Update: The phone is charging on my portable charger but won't turn on nor connecting via Windows 8.1
I found the problem. After doing some research, my phone is being half brick and im using Qualcomm HS-USB QDLoader 9008(COM3) but I don't know how to push files or how to use qhsusb_dload on the LG G3. PLEASE HELP ME
I found the problem. After doing some research, my phone is being half brick and I'm on Qualcomm HS-USB QDLoader 9008(COM3) port but I don't know how to push files or how to use qhsusb_dload on the LG G3. PLEASE HELP ME
I've never seen a device that doesn't boot into Download Mode.
So you're doing everything exactly like this man does and on 0:25 you can't see that Download Mode icon ?
Nope not working at all, either its trolling me or its officially dead. It just says im still ported into Qualcomm on my screen instead of download mode
Please help guys, I really need help before tomorrow. No boot, no screen,no download mode, no usb connected except for qualcomm hs-usb qdloader 9008 (com3) and can not use lgflashtool. Does this means its a hardbrick and I can't do anything to unbrick this device and I need to call T-Mobile for another phone or can the dev gods help me fix this phone problems soon. Please answer asap
U said, u fiddle with the sd card partition which I think shouldn't do... Best option is to take back for a replacement or repair my friend...
Thats the only option? I heard there is another way to reset it
I had the same problem .. I tried to update my phone with ota and the same happend to my phone .. I downloaded the latset stock software it was .kdz and i used lg tool and from control panel i changed the port to 41 and it did work
Akhayev said:
I had the same problem .. I tried to update my phone with ota and the same happend to my phone .. I downloaded the latset stock software it was .kdz and i used lg tool and from control panel i changed the port to 41 and it did work
Click to expand...
Click to collapse
Exactly how to change com port to 41
Sent from my LG-D855 using Tapatalk
newstar said:
Exactly how to change com port to 41
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
http://www.lg-phones.org/how-to-flash-unbrick-lg-g3-back-to-stock.html
Put the phone into download mode, go into device manager, ports(COM), you should see LGE then right click on properties, Port settings, advanced, then change COM port 41.then click ok and you should be fine.
Sent from my LG-LS980 using XDA Free mobile app
As I explained before I cant put on download mode nor turn it on
http://forum.xda-developers.com/showthread.php?t=2582142
It has to be similar to this but I dont think the LG G2 variant would work on this and forgot to mention the usb is called qhsusb_bulk
[Note to modo: feel free to move this post to apropriate place]
NB2: I can't post attachment, but github can
You can hard brick a lenovo K920 phone, if you (me) are too lame and flash anything you can find, so there's even no lights, not recovery/factory reset/bootloader anymore, here's how to recover:
github.com/juju2013/K920HardBrickRecovery
Have fun!
Is that realy true
I have bricked my Lenovo Vibe Z2 Pro (ROW). I also lost the partition. How to recover? I can boot in to recovery mod as well TWRP.
Lenovo Vibe Z2 Pro CN
vendredi13 said:
[Note to modo: feel free to move this post to apropriate place]
NB2: I can't post attachment, but github can
You can hard brick a lenovo K920 phone, if you (me) are too lame and flash anything you can find, so there's even no lights, not recovery/factory reset/bootloader anymore, here's how to recover:
github.com/juju2013/K920HardBrickRecovery
Have fun!
Click to expand...
Click to collapse
Is this thing working?
jOkErHROM said:
Is this thing working?
Click to expand...
Click to collapse
Yes, in my curiosity of trying to flash various new ROMs and Kernals, I have bricked my mobile twice after which it was completely dead and this did work. When I plugged out the battery connector, there was a little spark which appears to be a static current (???!!!) preventing my battery from charging or powering on my device.
---------- Post added at 11:30 AM ---------- Previous post was at 11:28 AM ----------
ketan_naik said:
I have bricked my Lenovo Vibe Z2 Pro (ROW). I also lost the partition. How to recover? I can boot in to recovery mod as well TWRP.
Click to expand...
Click to collapse
If u are able to get to bootloader, flash firmware with QFIL. You will get everything back.
If u are able to get to bootloader, flash firmware with QFIL. You will get everything back.
Click to expand...
Click to collapse
There's no need to get to bootloader. He needs Qualcomm HS-USB drivers for 9006 and 9008 mods. Get the proper ROM with prog_emmc_firehose; flash(something).xml, rawprogram0.xml and patch.xml, and you're ready to flash!
jOkErHROM said:
There's no need to get to bootloader. He needs Qualcomm HS-USB drivers for 9006 and 9008 mods. Get the proper ROM with prog_emmc_firehose; flash(something).xml, rawprogram0.xml and patch.xml, and you're ready to flash!
Click to expand...
Click to collapse
Hi Guys,
I bricked my Vibe Z2 pro. Not able to make screen on. its all black. No sign of charging. when connected to PC getting message of unrecognized device. Hence not able to use QFIL utility to load original ROM. Please Help me
[email protected] said:
Hi Guys,
I bricked my Vibe Z2 pro. Not able to make screen on. its all black. No sign of charging. when connected to PC getting message of unrecognized device. Hence not able to use QFIL utility to load original ROM. Please Help me
Click to expand...
Click to collapse
Hi All,
I waited to drain the battery fully. And out of curiosity just connected it to my laptop. I saw red light blinking and then finally connected to original charger. And I got my device back to life. Then installed S288_ROW using OFIL.
Hi,
I tried to install a custom rom on my LG G3 d858hk model. I was in twrp recovery and trying to install rom. Suddenly the phone got stuck. I waited for some time and then pulled the battery out and reinserted it. But still no light etc. Even nothing happens when I plug in charger. Looks like its completely dead. Any body any idea, how can i recover it from the black screen.
Regards,
Khurram.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 follow this guide just download ure files
Hi. am facing the same issue. Is there any other way to fix it, that doesn't include opening up the phone?
antony990 said:
Hi. am facing the same issue. Is there any other way to fix it, that doesn't include opening up the phone?
Click to expand...
Click to collapse
Do you have a warranty for you phone ? do you tried to download mode, fastboot mode and not working? In case the phone is completely dead, I can suggest you the option boarddiag (open phone) and jtag.
cesarandres_8911 said:
Do you have a warranty for you phone ? do you tried to download mode, fastboot mode and not working? In case the phone is completely dead, I can suggest you the option boarddiag (open phone) and jtag.
Click to expand...
Click to collapse
Yes I have a warranty. But I had installed a custom ROM (cloudy g3), so I guess that violates mine. The phone is dead, and shows up in device manager as LGE AndroidNet USB Serial Port. Don't even know why its showing up like that
Okay, am i'm searching for any available software fix that's gonna work for me at least before I resort to opening up the phone
Let me shed some light on what caused my phone to go dark, to save someone else from repeating the same mistake... I was trying to upgrade twrp from version 2.8 to 3.0. I thought using autorec would help me achieve that. But once it had finished, I attempted to boot to recovery and since then my phone has gone completely dark
OK, you could try to carry the cellphone to LG support and you can tell that after an upgrade, your phone has not returned to turn on. Usually, they change the motherboard. If you want to do it through BoardDiag, here is an explanation:
http://forum.xda-developers.com/showpost.php?p=65003040&postcount=300
cesarandres_8911 said:
OK, you could try to carry the cellphone to LG support and you can tell that after an upgrade, your phone has not returned to turn on. Usually, they change the motherboard. If you want to do it through BoardDiag, here is an explanation:
http://forum.xda-developers.com/showpost.php?p=65003040&postcount=300[/url]
Click to expand...
Click to collapse
Thanks for your help. Ive been able to get my phone to 9008 mode. So, am getting the part where I have to use the boarddiag tool, but am abit confused. What should be the value of my target dir, and AP chipset?. For the chipset, i'm thinking I should use the value that's similar to the one at this guide
http://forum.xda-developers.com/spr....
My phone is an LG g3 d855, so please guide
antony990 said:
Thanks for your help. Ive been able to get my phone to 9008 mode. So, am getting the part where I have to use the boarddiag tool, but am abit confused. What should be the value of my target dir, and AP chipset?. For the chipset, i'm thinking I should use the value that's similar to the one at this guide
http://forum.xda-developers.com/spr...and "TARGET DIR" should be the same location.
Click to expand...
Click to collapse
cesarandres_8911 said:
The first thing you should do is download the .tot file corresponding to your Variant (D855), I think that you can find it here: http://forum.xda-developers.com/lg-g3/help/tot-dll-file-d855-t2859828
Follow this guide to use boarddiag:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
In the "Image EXTRACTION" sections, in "BIN" must locate the file .tot that you downloaded.
In "DIR" you put the location where will be extracted the content of the .tot file.
Note that "DIR" and "TARGET DIR" should be the same location.
Click to expand...
Click to collapse
Yes. Iam following the guide you provided. But am stuck at this error. Check the image attached
antony990 said:
Yes. Iam following the guide you provided. But am stuck at this error. Check the image attached
Click to expand...
Click to collapse
And then, every time I unplug the device and plug it back into the PC, the device ends up being undetected by windows, and I have to redo the shorting procedure again. Is this normal behaviour, or something is wrong??
Also, when I put the battery back, and plug the device, it shows up as LGE androidnet usb
Anyone explain to me what this means. Please check the image attached
antony990 said:
Anyone explain to me what this means. Please check the image attached
Click to expand...
Click to collapse
I have the same error, and have tried about everything including 4 different computers and OSs, different cables, different versions of BoardDiag 2.99a - 3.99c, and still the same error.
singingandroid said:
I have the same error, and have tried about everything including 4 different computers and OSs, different cables, different versions of BoardDiag 2.99a - 3.99c, and still the same error.
Click to expand...
Click to collapse
It could also mean your device isn't in EDL mode 9008.
TheMadScientist said:
It could also mean your device isn't in EDL mode 9008.
Click to expand...
Click to collapse
I believe I am in the right 9008 mode. Screenshot is attached.
singingandroid said:
I believe I am in the right 9008 mode. Screenshot is attached.
Click to expand...
Click to collapse
I had be not dealt with edl on LG in a long time been on Samsung for a while that being said i could suggest maybe be uninstall the current 9008 driver and try to find a different source or updated and or try other usb ports. We on s8 have a lot of issues with usb 3.0 ports on pc's
TheMadScientist said:
I had be not dealt with edl on LG in a long time been on Samsung for a while that being said i could suggest maybe be uninstall the current 9008 driver and try to find a different source or updated and or try other usb ports. We on s8 have a lot of issues with usb 3.0 ports on pc's
Click to expand...
Click to collapse
Yeah, I've tried pretty much everything, but thank you for the reply.
Hello.
My LG G3 D855 Variant has been bricked.When trying to enter download mode startup screen Flashing and then to black screen.My PC is detecting my phone as Qualcomm HS-USB QDLoader 9008.Please help!:crying:
sachinvfrancis said:
Hello.
My LG G3 D855 Variant has been bricked.When trying to enter download mode startup screen Flashing and then to black screen.My PC is detecting my phone as Qualcomm HS-USB QDLoader 9008.Please help!:crying:
Click to expand...
Click to collapse
Hello,
Can you tell us what exactly you were trying to do? Also what firmware was your device running?
-Vatsal
Vatsal said:
Hello,
Can you tell us what exactly you were trying to do? Also what firmware was your device running?
-Vatsal
Click to expand...
Click to collapse
I'm Using LG G3 D855 European Variant
sachinvfrancis said:
I'm Using LG G3 D855 European Variant
Click to expand...
Click to collapse
Im in exactly the same position with exactly the same phone. Just got my phone back from LG repair and they said because it was rooted they wont repair it. Its stuck in boot loop and will only enter download mode for about 2 seconds before it enters boot loop again.
Computer only recognises it as Qualcomm HS-USB QDLoader 9008
Only message it gives is [330] boot verification fail - cause : MISMATCH_SIG_LEN
I was on CM13 and started to flash a new rom and it got stuck at 5%. After hours I disconnected the battery and this is what im left with.
Please help as every guide for Qualcomm HS-USB QDLoader 9008 is for different variants
Can anyone help??????
Matt
search for boarddiag 2.99 in g3 subforum, it will help you. Also see links in my signature. I do also have the tool somewhere on my androidfilehost. Also note that you need a tot file(it can be older, yes)
bender_007 said:
search for boarddiag 2.99 in g3 subforum, it will help you. Also see links in my signature. I do also have the tool somewhere on my androidfilehost. Also note that you need a tot file(it can be older, yes)
Click to expand...
Click to collapse
OK bit overwhelmed so much info on this subject but not found a guide I can follow yet. The only one I found has a password on the zip containing the tool. I've emailed the developer and will sit and wait.
Feel like I may not see my G3 again
Matt
matt1500 said:
OK bit overwhelmed so much info on this subject but not found a guide I can follow yet. The only one I found has a password on the zip containing the tool. I've emailed the developer and will sit and wait.
Feel like I may not see my G3 again
Matt
Click to expand...
Click to collapse
Hm, have you seen: this
bender_007 said:
Hm, have you seen: this
Click to expand...
Click to collapse
Wow nice find very good although zappin the motherboard looks well scary. Also after my device has been returned by LG it is not longer recognized by device manager as Qualcomm HS-USB QDLoader 9008 but rather as LGE AndroidNet USB Serial Port (COM 3)
Is this a significant change?
Has it made it easier or harder to fix?
Thanks guys for your help and input
Matt
You don't have to open it, you are already in 9008 mode
Sent from my LG-H815 using Tapatalk
bender_007 said:
You don't have to open it, you are already in 9008 mode
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Ok so I got it back to 9008 mode I follow the thread and after downloading the tot file I extract it using the said method in BoardDiag 2.99 and it just comes up Error-Max number of partition
Do you know what this means???
Matt
I am on the same page
Have you fixed the error message:
Max number if partition coming from Boarddiag ?
hi, My redmi note 5 ai is dead! no recovery, no fastboot
but when i connect it to pc it's shown in device manager "qualcomm hs-usb qdloader 9008 com3"
is it in EDL mode?!
I see more threads about open back covers and turn battery socket and these things to go to EDL mode, But i didnt make anything of that .. i just connect it to the pc and it's shown "qualcomm hs-usb qdloader 9008 com3"
but when i tried to flash stock rom by miflash , it told me error and not flashed
please help
https://forum.xda-developers.com/re...tutorial-unbrick-redmi-note-5-whyred-t3816260
Sent from my whyred using XDA Labs
MikiGry said:
https://forum.xda-developers.com/re...tutorial-unbrick-redmi-note-5-whyred-t3816260
Sent from my whyred using XDA Labs
Click to expand...
Click to collapse
it tells me unauthorized for this operation
There is no other way (at least currently)
You need an authorised account to unbrick your phone
Sent from my whyred using XDA Labs
MikiGry said:
There is no other way (at least currently)
You need an authorised account to unbrick your phone
Sent from my whyred using XDA Labs
Click to expand...
Click to collapse
Is there any way to authorize my account?