Hello everyone, I had a big problem with my letv x800 US version when I installed a CN Rom but I managed to solve the problem with QFIL after I installed TWRP and the Couco92 Rom ( The1PRO_US_X800-ROW-v48RL-CUOCO92-5.5.011S) but at the end of the installation my letv x800 restarts on the Rom but before it shows me (Letv with two lines in Chinese) with a led light in blue and it is the same when I restart my phone.
And when I turn off my letv x800 to turn it on again I can not turn it back on with a normal press on the power button but you have to press for about 10 seconds so that it always comes on with the same problem.
Final problem: to turn on my letv x800 it is necessary to press the button power laying more than 10 seconds and with a normal press of 5 seconds it does not light, and when it lights with a long press of more than 10 seconds he shows me (Letv with two lines in Chinese) after he goes to the Rom but always with a led light in blue.
Please help me solve this problem.
Related
Hi guys,
I need your help : I was using my One X when suddenly, black screen, not even a led.
I tried to hold power + vol -, power + vol +, only power, ... during few seconds, during 30 seconds... nothing changes.
The best I can have is a red blinking led and my phone detected by my computer, the internal memory mounted (in recovery). But still no screen...
Can someone help me throught this please ?
Thanks in advance.
Hey, you best bet is to join the #htc-one-x IRC over at freenode. Someone over there should be able to provide you interactive support.
It may also help if you post back the information about your phone here, e.g. recovery version, unlock status, and the Rom you are running, what exactly you were doing when the screen died. It may be software, but from the sound of this your screen has just broken as hboot and recovery should still display despite any Rom issues.
Hope you can get some help on this
Hello,
Finally when I Alume so with the volume + button: led blue color, then the phone vibrates then the computer detects the phone for 5 seconds, then the LED will turn off. NOTHING TO READ
When I Alume so with the volume button -: led green color that vibrates and then which then detected by my pc, and the LED ettein. NOTHING SHOW
Forced to start: I press the power button + volume + flight, as the vibrate 3 times, and that's all ...
The Sony logo is not playing
this is after I install this rom damn, which i had this problem.
What to do?
beran57 said:
Hello,
Finally when I Alume so with the volume + button: led blue color, then the phone vibrates then the computer detects the phone for 5 seconds, then the LED will turn off. NOTHING TO READ
When I Alume so with the volume button -: led green color that vibrates and then which then detected by my pc, and the LED ettein. NOTHING SHOW
Forced to start: I press the power button + volume + flight, as the vibrate 3 times, and that's all ...
The Sony logo is not playing
this is after I install this rom damn, which i had this problem.
What to do?
Click to expand...
Click to collapse
Assuming you're using a xperia S / SL
-> Just flash the stock firmware (as your choice) with Flash tools - GO HERE (you will need all xs drivers installed in your pc like flashmode,fastbootmode
Xperia SLT26i JB 4.1.2 - [6.2.B.0.211] World GENERIC - if you want the Last one - GO HERE
[TUT] Flashing A FTF File Using Flashtool - GO HERE
Hi, my phone is worked good but I am make a s***,
phone is been rooted and I start bootloaderg300.exe,after this phone is going in restart and now is a big problem. Now phone is in the loop - start huawei screen - restart -start huawei screen - restart -start huawei screen - restart...
vol down and start button doesn't work ( huawei logo -restart ..), only vol down + vol up + start button - than phone go in pink screen and stop there
can somebody help me (I am a donkey ).
update,
I found original version of my rom v100r001c66b886
put on sd card - dload/update.app
pres vol+- i power , installation is going and stop on 1/3 ,
pls help ....
My phone is HTC desire 816g dual Sim
I downloaded rashr and downloaded the twrp within it was 3.1.1 i think and reboot to go to recovery mode but the phone didn't turn on its screen turns from black to dark blue with vibration I tried to press and hold the power button and volume down but nothing happend I tried to press them all too but it didn't work
What should I do?
Hold volume up and power for ten or fifteen seconds, as soon as it goes black hold volume down and power to get to the bootloader.
Cannot fastboot or display output at all.
Only the black screen dies
Initially I was in TWRP then I wanted to get out of TWRP I rebooted, the display on my display was Slot A then I pressed Slot B and there was a black screen. I waited for a while but didn't show up either.
Just got a black screen.
Pressing the power button / volume button goes up 5 seconds and doesn't get anything.
Waiting for 60 seconds and trying to hold the power button (using charging) only blinks white the charger LED is only for a moment :crying:
do you have any solution
Morriseta said:
Cannot fastboot or display output at all.
Only the black screen dies
Initially I was in TWRP then I wanted to get out of TWRP I rebooted, the display on my display was Slot A then I pressed Slot B and there was a black screen. I waited for a while but didn't show up either.
Just got a black screen.
Pressing the power button / volume button goes up 5 seconds and doesn't get anything.
Waiting for 60 seconds and trying to hold the power button (using charging) only blinks white the charger LED is only for a moment :crying:
do you have any solution
Click to expand...
Click to collapse
Flash stock by EDL MiFlash.
Enter fastboot mode by pressing vol- and power for 15 seconds, then type fastboot oem edl, then open MiFlash, then locate stock fastboot images, then select clean all and start flashing.
After all flashing stock done (should have 'success' on MiFlash), you can start all over again redoing the custom ROM thing again.
Morriseta said:
Cannot fastboot or display output at all.
Only the black screen dies
Initially I was in TWRP then I wanted to get out of TWRP I rebooted, the display on my display was Slot A then I pressed Slot B and there was a black screen. I waited for a while but didn't show up either.
Just got a black screen.
Pressing the power button / volume button goes up 5 seconds and doesn't get anything.
Waiting for 60 seconds and trying to hold the power button (using charging) only blinks white the charger LED is only for a moment :crying:
do you have any solution
Click to expand...
Click to collapse
If the screen is off and notification LED is blinking it means the device is in EDL mode, so go ahead and flash the stock ROM via EDL. (it's not the same as flashing the stock rom the normal way)