Related
Hello
After I got the OTA update of my rooted Chinese Mate 8 AL10, I obviously lost root access, but luckily the update didn't wipe my data. I also had TWRP
Now I have Android 7 and EMUI 5. I recall there were different TWRP versions depending on the version of EMUI, whether it was 4.0 or 4.1.
So is there a specific version of TWRP for Android 7 running with EMUI 5? If yes, what is it? I tried searching with scarse results! I want to avoid boot loops and phone recovery.
Also, is there a specific version of SuperUser to flash?
Thanks
HuaweiMate8 said:
Hello
After I got the OTA update of my rooted Chinese Mate 8 AL10, I obviously lost root access, but luckily the update didn't wipe my data. I also had TWRP
Now I have Android 7 and EMUI 5. I recall there were different TWRP versions depending on the version of EMUI, whether it was 4.0 or 4.1.
So is there a specific version of TWRP for Android 7 running with EMUI 5? If yes, what is it? I tried searching with scarse results! I want to avoid boot loops and phone recovery.
Also, is there a specific version of SuperUser to flash?
Thanks
Click to expand...
Click to collapse
I have L09C432B560. I use the following twrp:
http://sillanwali.com/downloads/twrp-3.0.3.img
I boot into twrp, mount system and vendor then flashed the following patched boot.
https://mega.nz/#!Yx4h3LwL!XNdOjpo-J...j6opIqSemyqI80
I now have full root on my mate 8. Remember, this might not work with your phone. If you want to try it out you should be able to reflash the current boot.img of your phone if necessary.
If the above link does not work, try the link in #3573 or #3572 of the following page:
https://forum.xda-developers.com/mate-8/development/rom-kangvip-slim-t3318572/page358
Thanks. I'll try this when I can
[email protected] said:
I have L09C432B560. I use the following twrp:
https://forum.xda-developers.com/mate-8/development/rom-kangvip-slim-t3318572/page358
Click to expand...
Click to collapse
Hi
Official TWRP is 3.0.2.0 as per https://twrp.me/ and it doesn't seem to work on Chinese Mate 8 AL10 and EMUI 5.0. So I tried the TWRP version you mentioned and it does work up to a certain point. I mean I can successfully install it, and boot to TWRP, but it seems that it doesn't recognize any file system, even my data partition cannot be seen. Yet if I just reboot the phone, I can successfully see my data partition and my data.
Maybe this unofficial version still has problems and doesn't recognize the data partition because it is somehow encrypted? I really don't want to format the phone, I have loads of data I don't want to lose and taking a backup takes ages.
All I want now is to be able to see any partition that has the SuperUser.zip to flash. I really don't care about TWRP as much as I care of gaining root access. I still didn't try with an OTG key as I am travelling, but once I get back home, I'll try that, but if TWRP cannot mount the SYSTEM partition I guess then it cannot flash SuperUser.zip even with OTG...
Right?
HuaweiMate8 said:
Hi
Official TWRP is 3.0.2.0 as per https://twrp.me/ and it doesn't seem to work on Chinese Mate 8 AL10 and EMUI 5.0. So I tried the TWRP version you mentioned and it does work up to a certain point. I mean I can successfully install it, and boot to TWRP, but it seems that it doesn't recognize any file system, even my data partition cannot be seen. Yet if I just reboot the phone, I can successfully see my data partition and my data.
Maybe this unofficial version still has problems and doesn't recognize the data partition because it is somehow encrypted? I really don't want to format the phone, I have loads of data I don't want to lose and taking a backup takes ages.
All I want now is to be able to see any partition that has the SuperUser.zip to flash. I really don't care about TWRP as much as I care of gaining root access. I still didn't try with an OTG key as I am travelling, but once I get back home, I'll try that, but if TWRP cannot mount the SYSTEM partition I guess then it cannot flash SuperUser.zip even with OTG...
Right?
Click to expand...
Click to collapse
This twrp cannot mount the data partition but you can mount the system partition and vendor. You then can flash the patched boot mention which also contain superSU that gives you root.. Do not use this twrp to format the data partition.
---------- Post added at 03:29 PM ---------- Previous post was at 03:00 PM ----------
HuaweiMate8 said:
Hi
Official TWRP is 3.0.2.0 as per https://twrp.me/ and it doesn't seem to work on Chinese Mate 8 AL10 and EMUI 5.0. So I tried the TWRP version you mentioned and it does work up to a certain point. I mean I can successfully install it, and boot to TWRP, but it seems that it doesn't recognize any file system, even my data partition cannot be seen. Yet if I just reboot the phone, I can successfully see my data partition and my data.
Maybe this unofficial version still has problems and doesn't recognize the data partition because it is somehow encrypted? I really don't want to format the phone, I have loads of data I don't want to lose and taking a backup takes ages.
All I want now is to be able to see any partition that has the SuperUser.zip to flash. I really don't care about TWRP as much as I care of gaining root access. I still didn't try with an OTG key as I am travelling, but once I get back home, I'll try that, but if TWRP cannot mount the SYSTEM partition I guess then it cannot flash SuperUser.zip even with OTG...
Right?
Click to expand...
Click to collapse
This twrp cannot mount the data partition but you can mount the system partition and vendor. You then can flash the patched boot mention which also contain superSU that gives you root.. Do not use this twrp to format the data partition.
View attachment SuperSU-v2.79-201612051815-EMUI5.0.zip
TWRP_N.img https://mega.nz/#!9ZEhgALb!uzffZsUi6bJXev2pymFE2Bb_v1Zs949PY8amtALNStc
We are having the same issue with the Mate 9. Have a look the forums there as a lot of things are very similar up to this point. In emui 5 flashing SuperSU will put you in a bootloop. I'm sure KangVIP had a modded boot with root available for the Mate 8 that you guys can flash to have root. They do for the Mate 9.
[email protected] said:
This twrp cannot mount the data partition but you can mount the system partition and vendor. You then can flash the patched boot mention which also contain superSU that gives you root.. Do not use this twrp to format the data partition.
Click to expand...
Click to collapse
You're right, this TWRP can't mount /data and you cannot use it to make a backup but it can perfectly flash system images.
If you flash this one https://mega.nz/#!Yx4h3LwL!XNdOjpo-JmTXCPXz5wcuSGzxtHLVyj6opIqSemyqI80 you will be rooted with phh's SuperUser/ OpenSource SELinux-capable SuperUser (https://forum.xda-developers.com/android/software-hacking/wip-selinux-capable-superuser-t3216394).
For me this is better because it allows me to use YeloPlay, a Belgian Telenet TV watch program that doesn't work on rooted devices but now it does
I tried flashing unsecured boot.IMG for b577 but I had fingerprint I'd on. After flashing I couldn't get into my phone. Do I have to turn off fingerprint to flash modified boot.img?
Sent from my HUAWEI NXT-AL10 using Tapatalk
bidi1234 said:
I tried flashing unsecured boot.IMG for b577 but I had fingerprint I'd on. After flashing I couldn't get into my phone. Do I have to turn off fingerprint to flash modified boot.img?
Sent from my HUAWEI NXT-AL10 using Tapatalk
Click to expand...
Click to collapse
The answer is in your question YES
I did with magisk,
Super easy
Sent from my HUAWEI NXT-L29 using XDA-Developers Legacy app
FOR SOLUTION READ POST:
[SIZE="5"]https://forum.xda-developers.com/showpost.php?p=71007646&postcount=6[/SIZE]
Long time silent reader here. I always find solutions for my problems in xda-devs, until now.
Hope you guys can help me once again..
So, yesterday I messed up my OP3 and wiped all partitions on my phone.
I've tried many steps, trying to flash a flashable stock rom (the one with boot.img and system img) in fastboot, result= installation succeed, but getting blackscreen on boot.
Installing full OOS rom from adb sideload using stock recovery, result= failed (* cannot read 'OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip' *)
Installing full OOS rom from adb sideload using TWRP recovery, result= failed (* cannot read 'OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip' *)
Copy the rom to my phone, and installing the zip with TWRP, result failed (error=7)
So far these are my references:
https://forums.*neplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip
OnePlus3Oxygen_16_OTA_008_all_1606122244_e0cfc5ffc8bf411a.zip
oxygen-os-3.2.5-fastboot-flashable.zip
twrp 3.0.3
https://forum.xda-developers.com/showthread.[/CODE]php?t=2588979
Click to expand...
Click to collapse
applsaus said:
Long time silent reader here. I always find solutions for my problems in xda-devs, until now.
Hope you guys can help me once again..
So, yesterday I messed up my OP3 and wiped all partitions on my phone.
I've tried many steps, trying to flash a flashable stock rom (the one with boot.img and system img) in fastboot, result= installation succeed, but getting blackscreen on boot.
Installing full OOS rom from adb sideload using stock recovery, result= failed (* cannot read 'OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip' *)
Installing full OOS rom from adb sideload using TWRP recovery, result= failed (* cannot read 'OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip' *)
Copy the rom to my phone, and installing the zip with TWRP, result failed (error=7)
So far these are my references:
Click to expand...
Click to collapse
So twrp is working right?
Flash any rom say lineage os
Flash multirom by BitOBSessiOn
Flash multirom twrp
Flash oos as secondary rom
And then swap oos to primary rom
try with some other TWRP . May be v16 blu_spark
https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Ye sideboard gives me issues aswell, push the zip and manually flash it In twrp: "adb push romzipname /sdcard/", the file is now ib the folder /sdcard/.
Puddi_Puddin said:
Ye sideboard gives me issues aswell, push the zip and manually flash it In twrp: "adb push romzipname /sdcard/", the file is now ib the folder /sdcard/.
Click to expand...
Click to collapse
tried it with OOS 3.2.8 and OOS 4.0.2, both give me ERROR=7
abhi0502 said:
So twrp is working right?
Flash any rom say lineage os
Flash multirom by BitOBSessiOn
Flash multirom twrp
Flash oos as secondary rom
And then swap oos to primary rom
Click to expand...
Click to collapse
Working on it. Flashed lineage os, looks like working.
Still waiting on boot screen tho (15 mins & counting, hope it won't be bootloop)
hyperorb said:
try with some other TWRP . May be v16 blu_spark
https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Click to expand...
Click to collapse
Good idea, I'll put ur idea for the next try
applsaus said:
tried it with OOS 3.2.8 and OOS 4.0.2, both give me ERROR=7
Working on it. Flashed lineage os, looks like working.
Still waiting on boot screen tho (15 mins & counting, hope it won't be bootloop)
Good idea, I'll put ur idea for the next try
Click to expand...
Click to collapse
Then it's a twrp issue. I'm currently in Bluspark v16 so
Error 7 in TWRP AFAIK is an issue with using an incompatible recovery, try the latest one 3.0.4-1 I think it is from this forum.
Puddi_Puddin said:
Then it's a twrp issue. I'm currently in Bluspark v16 so
Click to expand...
Click to collapse
ghostofcain said:
Error 7 in TWRP AFAIK is an issue with using an incompatible recovery, try the latest one 3.0.4-1 I think it is from this forum.
Click to expand...
Click to collapse
I flash twrp bluspark as @Puddi_Puddin suggested and flashing Freedom OS. After that, I restore my data using my last Nandroid backup, then the bootloop comes again. Tried it several times using TWRP Bluspark with different ROMs, still no luck. So I suggest, there's nothing I can do to restoring my phone's data.
I read across the XDA forums and Oneplus forums that some people had similar issues for me, and they suspected something's wrong about corrupted partition, not because twrp version. And I also had tried flashing a few ROM in the past using the same TWRP 3.03 version without any problems. Strange.
Anyway, problems solved, my phone's up and running.
CASE CLOSED.
Thanks XDA
P.S: MODS Please Lock/Close this thread
applsaus said:
Anyway, problems solved, my phone's up and running.
CASE CLOSED.
Thanks XDA
P.S: MODS Please Lock/Close this thread
Click to expand...
Click to collapse
And, what was the solution ?
Restarting from Zero I guess.
Donglip said:
And, what was the solution ?
Click to expand...
Click to collapse
This:
hyperorb said:
try with some other TWRP . May be v16 blu_spark
https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Click to expand...
Click to collapse
emuandco said:
Restarting from Zero I guess.
Click to expand...
Click to collapse
Better than not starting at all, at least.
I was looking for a TWRP for the Xiaomi Mi Mix 2. I've found a chinese board where a user called YouLinw compiled TWRP for us. According to him and the users there (Google Translator) it seems to work. Can't test it by now, because my Xiaomi Mi Mix 2 isn't shipped right now. It was really tricky to register in this chinese board and then to download the file. You can download it yourself in the board and for all other users I made a mirror with no registration.
There's now a new english TWRP from Xiaomi.eu.
I don't take any responsibilities for this file. If you break or damage your phone, it's your fault!
The recovery is in chinese - but you shuold be able to use it with screenshots in your language.
Download: https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=12
Credits: https://xiaomi.eu/community/threads/twrp-3-1-1-for-xiaomi-mix-2.41634/
Installation:
Unlock your phone - http://en.miui.com/unlock/
Download TWRP from the link above
Flash over Fastboot
Hope you like it.
Great find! Any idea what version of SuperSU can be used to root The device ?
In this chinese board there's something written like, that SuperSu 2.82 is suitable for the Mix 2 (without guarantee).
PJF16 said:
I was looking for a TWRP for the Xiaomi Mi Mix 2. I've found a chinese board where a user called YouLinw compiled TWRP for us. According to him and the users there (Google Translator) it seems to work. Can't test it by now, because my Xiaomi Mi Mix 2 isn't shipped right now. It was really tricky to register in this chinese board and then to download the file. You can download it yourself in the board and for all other users I made a mirror with no registration.
I don't take any responsibilities for this file. If you break or damage your phone, it's your fault!
The recovery is in chinese - but you shuold be able to use it with screenshots in your language.
Credits & Download: http://bbs.zhiyoo.com/.php?mod=viewthread&tid=13431779&extra=page=1&page=1&state=1
Download (Mirror): https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=11
Installation:
Unlock your phone - http://en.miui.com/unlock/
Download TWRP from the link above
Flash over Fastboot
Hope you like it.
Click to expand...
Click to collapse
I find another TWRP under mi-globe.com You can try to download at below link:
https://www.filehost.com/?fid=817550096634801044
I added now a new TWRP from a Xiaomi.eu Founder.
Xiaomi.eu released rom for Mi Mix 2, it's called chiron. TWRP as the linked it, here. Might be the same as the OP linked tho.
Should work. My phone arrives next week i will test it.
Yes, it's the same (also see Credits).
PJF16 said:
I added now a new TWRP from a Xiaomi.eu Founder.
Click to expand...
Click to collapse
Me too comes to me next week. I will try it.
Hello guys,
I've flash with fastboot TWRP for my mix2 but when i restarted with fasboot on TWRP it ask me for a password.
Second point : I have no access to files like the xiaomi.eu rom stored on my phone.
anyone faced these issue and is there any solution ? (the bootloader is well unlocked)
ANd when i restart in recovery my phone with power and vol + button, i have the xiaomi recovery and not TWRP.
It is strange, no ??
Thanks for your help
PJF16 said:
In this chinese board there's something written like, that SuperSu 2.82 is suitable for the Mix 2 (without guarantee).
Click to expand...
Click to collapse
Can confirm, superSU 2.82 works on Xiaomi EU rom version 7.9.22
unable to mount /system after nadroid backup
TWRP installed fine and experienced no issues until I made a full Nandroid backup. After the backup I have issues flashing because the device is unable to mount /system . busy or in use error.
So now I wait until official TWRP.
If you are having any twrp issues just reboot into twrp and the issues will be gone. Try again!
Dust2Dust said:
TWRP installed fine and experienced no issues until I made a full Nandroid backup. After the backup I have issues flashing because the device is unable to mount /system . busy or in use error.
So now I wait until official TWRP.
Click to expand...
Click to collapse
Same here
***TAPATALKING***
Is this recovery work on Xiaomi Miui 9 beta rom....?
brunsman6229 said:
Is this recovery work on Xiaomi Miui 9 beta rom....?
Click to expand...
Click to collapse
I am using TWRP with the EU beta 9.
真的假的？
tnt3400 said:
真的假的？
Click to expand...
Click to collapse
English please.
MementoM said:
For the life of me I cannot get this TWRP to do anything. My phone came with Global 8.5 Stable. I confirmed my bootloader is unlocked. I flashed the TWRP and booted it, it boots fine but trying to backup anything I get Failed to unmount "/system" (Device or resource busy). I tried to reboot back into TWRP still same problem, I tried to reflash TWRP through both fastboot and TWRP image installer. I downloaded the EU rom and tried to flash it and it also failed to flash. OEM unlock is checked, USB debugging is on. TWRP gets over written with the Mi Mix recovery whenever I boot back into system, it doesn't ask me if I want to modify anything when it first boots. Why is this giving me so much trouble I've never encountered this problem with TWRP. Any Advice?.
Thanks much
Click to expand...
Click to collapse
There is still no official TWRP available. I always do a full wipe factory reset and manual wipe everything before flashing anything. I also get the errors, but I've never tried to restore a backup because I usually just do clean installs each time because the ROMs available right now aren't stable enough for daily use.
The trick for EU rom is complete wipe than boot back into TWRP and try flashing. You will get 2 errors but will install fine. You can install USB drive or transfer EU rom through mtp via TWRP.
I'll do it like @allrockedout
It seems this TWRP is more beta than stable :-/
Also check the "Mount" button and uncheck the option to open all partitions readonly.
Then reboot TWRP. Last but not least before performing any flash operations (ROM or Magisk/SU-Stuff) check all partitions as marked - then do your flash work
i also miss some more partition that are available to other devices like EFS.
Did anyone know about another TWRP version or devs that are working on one?
raupe said:
I'll do it like @allrockedout
It seems this TWRP is more beta than stable :-/
Also check the "Mount" button and uncheck the option to open all partitions readonly.
Then reboot TWRP. Last but not least before performing any flash operations (ROM or Magisk/SU-Stuff) check all partitions as marked - then do your flash work
i also miss some more partition that are available to other devices like EFS.
Did anyone know about another TWRP version or devs that are working on one?
Click to expand...
Click to collapse
I recommend twrp by @IceMan_it https://www.movilesdualsim.com/index.php?threads/180006
For backup and Restore (with EFS!) with Linux 64 bit https://www.movilesdualsim.com...rilinguee.180989/#post-2060493
Credit: @IceMan_it
Inviato dal mio Mi Note 2 utilizzando Tapatalk
How to root Redmi note 5 pro on Miui 11 ... please help
Rdxinha said:
How to root Redmi note 5 pro on Miui 11 ... please help
Click to expand...
Click to collapse
If you custom recovery then flash magisk file using your custom recovery this will work i guess
mohitmb0211 said:
If you custom recovery then flash magisk file using your custom recovery this will work i guess
Click to expand...
Click to collapse
question. flashing recovery need to wipe data? or i can flash twrp without wiping?
nicoodc said:
question. flashing recovery need to wipe data? or i can flash twrp without wiping?
Click to expand...
Click to collapse
It'll work without wiping data. I have tried it and i faced no problem.
mohitmb0211 said:
It'll work without wiping data. I have tried it and i faced no problem.
Click to expand...
Click to collapse
I hope you can help me, I'm having similar problems too. I boot into TWRP, but the new Android 9 updates, I think, have everything encrypted. So rooting my Redmi Note 5 Pro has been really puzzling me all day. Because of the encryption, I can't access the internal storage where Magisk or SuperSU .img should be, unless I wipe all data, which removes the .imgs. Following the advice of some other threads, I have tried rebooting TWRP from itself and then flashing a TWRP.img to flash but I can't find it anywhere either. I tried adb sideloading and adb pushing but I can't get my computer to detect my phone when its in recovery. Thought I'd ask here before making my own thread
Gdsad0 said:
I hope you can help me, I'm having similar problems too. I boot into TWRP, but the new Android 9 updates, I think, have everything encrypted. So rooting my Redmi Note 5 Pro has been really puzzling me all day. Because of the encryption, I can't access the internal storage where Magisk or SuperSU .img should be, unless I wipe all data, which removes the .imgs. Following the advice of some other threads, I have tried rebooting TWRP from itself and then flashing a TWRP.img to flash but I can't find it anywhere either. I tried adb sideloading and adb pushing but I can't get my computer to detect my phone when its in recovery. Thought I'd ask here before making my own thread
Click to expand...
Click to collapse
Change your recovery to orangefox recovery and encryption doesn't bother much just take your data backup and factory reset your phone.hope so it'll work.
mohitmb0211 said:
Change your recovery to orangefox recovery and encryption doesn't bother much just take your data backup and factory reset your phone.hope so it'll work.
Click to expand...
Click to collapse
Thanks, I ended up just getting an SD card and flashing with that
Gdsad0 said:
Thanks, I ended up just getting an SD card and flashing with that
Click to expand...
Click to collapse
Glad to help you .
Can i flash china rom on global version because i need miui caller and contacts app or is there anyway to change google dialer on global blackshark 3 kle-h0
Please help and which china rom ver should i go for it
You can flash Chinese Rom on global Rom provided bootloader is unlocked.
theintelligent said:
You can flash Chinese Rom on global Rom provided bootloader is unlocked.
Click to expand...
Click to collapse
Can you provide me link to chinese rom that match my version of black shark 3 kle-h0
bisho2009 said:
Can you provide me link to chinese rom that match my version of black shark 3 kle-h0
Click to expand...
Click to collapse
Try this one
- Download the file (https://mega.nz/file/KV8TwaCD#6AtUchMlgzKrjoWJY2aM8CZQjvBb0nu-LFIyky46NCo)
- Copy it to /sdcard/ota/
- Rename it to update.zip
- Dial *#*#1027#*#*
- Click local update
- Once completed restart
- If it says to format data after restart, please do so.
- After that install TWRP
- Boot into TWRP and then install magisk
- Start the phone and then restart again into TWRP.
- Install magisk GApps (https://mega.nz/file/PBllSIDb#uSD2U5WdY-9KpbfU0YRLm1SuQ25uPfAilUFDTgG3IiM)
- Start the phone and enjoy
Remember to backup your data. I am not responsible for bricking your device so please do it at your own risk.
theintelligent said:
You can flash Chinese Rom on global Rom provided bootloader is unlocked.
Click to expand...
Click to collapse
theintelligent said:
Try this one
- Download the file (https://mega.nz/file/KV8TwaCD#6AtUchMlgzKrjoWJY2aM8CZQjvBb0nu-LFIyky46NCo)
- Copy it to /sdcard/ota/
- Rename it to update.zip
- Dial *#*#1027#*#*
- Click local update
- Once completed restart
- If it says to format data after restart, please do so.
- After that install TWRP
- Boot into TWRP and then install magisk
- Start the phone and then restart again into TWRP.
- Install magisk GApps (https://mega.nz/file/PBllSIDb#uSD2U5WdY-9KpbfU0YRLm1SuQ25uPfAilUFDTgG3IiM)
- Start the phone and enjoy
Remember to backup your data. I am not responsible for bricking your device so please do it at your own risk.
Click to expand...
Click to collapse
Thanks in advance but if i did brick the device how could i restore it to original is there any fastboot rom or any way to recover device from bricking?
bisho2009 said:
Thanks in advance but if i did brick the device how could i restore it to original is there any fastboot rom or any way to recover device from bricking?
Click to expand...
Click to collapse
No fastboot Rom is available so best bet is to have a TWRP backup first, save it to your PC before trying anything else.
Yes. Then upload a copy of the twrp backup here ?
FlotsamRefuge said:
Yes. Then upload a copy of the twrp backup here
Click to expand...
Click to collapse
Its advisable to use TWRP backup of your phone, as I was trying to do that for some of my friends, but the backup contains my own Mi account, which i was unable to get rid off.
theintelligent said:
Its advisable to use TWRP backup of your phone, as I was trying to do that for some of my friends, but the backup contains my own Mi account, which i was unable to get rid off.
Click to expand...
Click to collapse
log out your mi and google account first, do a factory reset and then make a full twrp backup then upload it here for the sake of humanity (and of course if u need it to restore back if u bricked your phone)
wrinkletit said:
log out your mi and google account first, do a factory reset and then make a full twrp backup then upload it here for the sake of humanity (and of course if u need it to restore back if u bricked your phone)
Click to expand...
Click to collapse
i will upload twrp backup but there is global ota rom if you want global because mine has google dialer thats sucks
did you try this can be flashed by twrp or for best result flash it using local update
i did try every ota rom even pro versions but dont try pro without full backup
Blackshark 3 KLE-H0 global beta rom download link:
mega.nz/file/rc9EQaQK#0pEu0S95u0DIzO9lCLSl9_wVArc1YUbDN6iIE5elr D4
bisho2009 said:
i will upload twrp backup but there is global ota rom if you want global because mine has google dialer thats sucks
did you try this can be flashed by twrp or for best result flash it using local update
i did try every ota rom even pro versions but dont try pro without full backup
Blackshark 3 KLE-H0 global beta rom download link:
mega.nz/file/rc9EQaQK#0pEu0S95u0DIzO9lCLSl9_wVArc1YUbDN6iIE5elr D4
Click to expand...
Click to collapse
yes the beta is DPX
whilst the global stable rom is mp1 mp2 and latest mp3..
would you mind to share your twrp backup?
wrinkletit said:
yes the beta is DPX
whilst the global stable rom is mp1 mp2 and latest mp3..
would you mind to share your twrp backup?
Click to expand...
Click to collapse
My backup giving me errors
Failed to mount ´/vendor´ (Invalid argument)
Failed to mount ´/product´ (Invalid argument)
Failed to mount ´/version´ (Invalid argument
when I try to restore now iam stuck on china rom but i will try find a way to restore if there's no luck we should wait until global joy ui 12 full ota release or asking xiaom for fastboot rom
P
theintelligent said:
Try this one
- Download the file (https://mega.nz/file/KV8TwaCD#6AtUchMlgzKrjoWJY2aM8CZQjvBb0nu-LFIyky46NCo)
- Copy it to /sdcard/ota/
- Rename it to update.zip
- Dial *#*#1027#*#*
- Click local update
- Once completed restart
- If it says to format data after restart, please do so.
- After that install TWRP
- Boot into TWRP and then install magisk
- Start the phone and then restart again into TWRP.
- Install magisk GApps (https://mega.nz/file/PBllSIDb#uSD2U5WdY-9KpbfU0YRLm1SuQ25uPfAilUFDTgG3IiM)
- Start the phone and enjoy
Remember to backup your data. I am not responsible for bricking your device so please do it at your own risk.
Click to expand...
Click to collapse
Hi can i flash this through twrp?and will ota work normally?
cinmil said:
Hi can i flash this through twrp?and will ota work normally?
Click to expand...
Click to collapse
OTA cannot be flashed via TWRP. You have to use the process described above.
theintelligent said:
OTA cannot be flashed via TWRP. You have to use the process described above.
Click to expand...
Click to collapse
Already flashed using twrp.but now my phone messed up.tried to flash global but start up screen still showing tencent game. If tried to flash my twrp backup will failed showing like top comment vender product odp invalid argument
wrinkletit said:
log out your mi and google account first, do a factory reset and then make a full twrp backup then upload it here for the sake of humanity (and of course if u need it to restore back if u bricked your phone)
Click to expand...
Click to collapse
You might wanna remove any locks too ( patterns, fingerprints, face unlock ) before you perform backup