Hi,
I don't know where to post my issue so i write it here as someone say MTCC is nearly MTCB.
I have installed a MTCC_KLD device on my peugeot 3008 and it worked well until i decide this week end to plug the original MFD:
the HU randomly reboots, no communication between the UH and the MFD.
I tried various setup of canbus in "factory setting" but only number "50" works correctly (steering wheel control, park assist,etc...)
I tried to contact the seller and all he says is : "Does not support the original car display"
Does someone already had this issue (even with an other car) and who can give me some answer exept the seller ?
I did not find forum/support or web site for klyde
Thanks.
PS: sorry for my bad english
Hi everyone, looking to pick up an octacore headunit from aliexpress, "KANOR" branded.
[can't post link because new member]
But one of the main reasons I want it is to connect with my ECU through a google play app called MDash. It connects via bluetooth. Through my reading over these android head units, I've seen a lot of mentions of the bluetooth functionality only working for music, phone calls, and the obd2 adapters. Does anyone have experience on whether or not the bluetooth is still this limited for the newer Android 8.0 octacore units? And if so, is there a way I can get the functionality I need out of the headunit by rooting it?
Thanks for your time and help!
bump
bump. Any help is greatly appreciated before I spend my money on a headunit.
Yes mate still crap. In fact Id say worse.
I have a new erising octa px5, mtcE, android 8 and bluetooth is minimal. Phone app is rubbish, sounds / looks terrible and it just about works .
Dont no for sure what profiles it has stock but seems everywhere I read now ppl are going the android auto route (which uses 'OK' google everything (surprise surprise)) and always on data. etc.
Lemmings!
I have a Klyde PX5 MTCE Android 8.0 headunit. Connected my Galaxy Note 9 to headunit USB. Nothing happens. Android Auto already installed in phone. Is there a need to install app on the headunit?
I know my country already supports Android Auto.
Bump! Anyone?
Hi, your unit is MTCE so please ask this question at the following forum:
https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development
To answer your question, this head unit is not running Android Auto, but you can install it on the unit. I haven't done it but I believe plenty of people have.
I bought this Android 9.1 stereo on eBay. The seller sent me the wrong one and won't return it. I wanted an am radio and Android 8.1 but this one doesn't come with it. Anyways. I went to install the steering wheel controls for a BMW through the settings but I get "Using a local file to upgrade:/mnt/udiskh/canupdate/can_app.iap Does not exist". It came with a BMW canbus box. Does anyone have that file or know where to get it? I emailed Seicane and they never got back to me. There is so many problems with this unit. Ugh. The reverse camera doesn't shut off. No steering wheel controls. No AM radio.
Software errore
Hello i have the same problem iv installed the screen 48 hours ago and iv put the can buss on bmw x3 and same problem missing files and i cant find it online
Software version 19.10.23a c.15 i need help please
Care model x3 2008
Email: [email protected]
Hello, i had zlink on my android unit on my car.
i accidentally deleted the app.
i tried to download several ZLINK virisions but none of them work.
can someone please help me and guide me in order to get tapp work again?
Factory reset/reload Android.
marchnz said:
Factory reset/reload Android.
Click to expand...
Click to collapse
I cant get the 4 digit code for the factory reset on the screen...
Usually is 126
tome12121 said:
I cant get the 4 digit code for the factory reset on the screen...
Click to expand...
Click to collapse
Is the device an MTCD/E
marchnz said:
Factory reset/reload Android.
Click to expand...
Click to collapse
I accidentally deleted the zlink on my device
Is there any way I can get it back??
Hello, I have recently bought an off market MMI for my Audi and I am having issues connecting my phone with Zlinks, the phone is successfully connecting via Bluetooth but the Zlinks app just displays WAITING. I would appreciate help and advice on how to fix this. Thanks
Hi, I have android 10 head unit and Zlink app. But my zlink have wired and wireless carplay. But I have xiaomi smartphone. Zlink setting have android auto but not have android auto. I want to wired or wireless add this zlink app. How do I?
Hi I have a android head unit and cannot get zlink stabilized. Some days it works some days not at all. I usually get the error message Hardware err no MTI #. I bought the C usb cable but where do you put it? Please help this is so frustrating. Is there a way to fix the zlink software? Thank you
Mimix3 said:
Hi I have a android head unit and cannot get zlink stabilized. Some days it works some days not at all. I usually get the error message Hardware err no MTI #. I bought the C usb cable but where do you put it? Please help this is so frustrating. Is there a way to fix the zlink software? Thank you
Click to expand...
Click to collapse
Is it an MTCD head unit. What does seller suggest when using hacky zlink
It looks like this. The seller doesn’t say anything no help. Is there an alternative to zlink?
Mimix3 said:
It looks like this. The seller doesn’t say anything no help. Is there an alternative to zlink?
Click to expand...
Click to collapse
If you're wanting to do Android Auto, there is an app called "Headunit Reloaded" developed by XDA developer @Emil Borconi. There is a free version of Headunit Reloaded that you can install to verify hardware compatibility before purchasing the full version. I have purchased the full version and can confirm that it works quite well as an alternative to ZLink.
[Android 4.1+] HeadUnit Reloaded for Android Auto with Wifi
This Threader is a Spin-off of the original: [Android 4.1+] Headunit for Android Auto - 160117 - Self Mode+ other fixes, x86, 720p by the late :crying: @mikereidis. App links: https://www.b3itlabs.com/prod.php?id=1 PlayStore...
forum.xda-developers.com
jlbooth said:
If you're wanting to do Android Auto, there is an app called "Headunit Reloaded" developed by XDA developer @Emil Borconi. There is a free version of Headunit Reloaded that you can install to verify hardware compatibility before purchasing the full version. I have purchased the full version and can confirm that it works quite well as an alternative to ZLink.
[Android 4.1+] HeadUnit Reloaded for Android Auto with Wifi
This Threader is a Spin-off of the original: [Android 4.1+] Headunit for Android Auto - 160117 - Self Mode+ other fixes, x86, 720p by the late :crying: @mikereidis. App links: https://www.b3itlabs.com/prod.php?id=1 PlayStore...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank you for the help. Greatly appreciated.
Mimix3 said:
It looks like this. The seller doesn’t say anything no help. Is there an alternative to zlink?
Click to expand...
Click to collapse
Yes - here; https://www.android.com/auto/compatibility/#compatibility-stereos
I have a Android radio the uses the zlink app, that I use my apple carplay, this wireless connection is very unstable and drops regularly. sometimes it does not connect at all.
The cable is beter but does also just randomly drop.
I have tried other iphones, cables and even looked for newer firmware, but says we have latest version on.
I purchased the Carlinkit device to see if this will work but also no luck.
Can someone maybe advice me?
PATMAN93 said:
I have a Android radio the uses the zlink app, that I use my apple carplay, this wireless connection is very unstable and drops regularly. sometimes it does not connect at all.
The cable is beter but does also just randomly drop.
I have tried other iphones, cables and even looked for newer firmware, but says we have latest version on.
I purchased the Carlinkit device to see if this will work but also no luck.
Can someone maybe advice me?
Click to expand...
Click to collapse
Use the android head unit as android head unit or buy genuine AA or Carplay unit based on need.
These Chinese knockoffs emulate and are problematic as emulator.
See post above