Related
hello guyz please help I am install bnd L34 firmware ton my bnd-Al10 from firmware finder app and it successfully installed but I am rebooting my phone its boot on erecovery mode and my frp is locked and the bootloader unlock site is down what can I do ,?
[email protected] said:
hello guyz please help I am install bnd L34 firmware ton my bnd-Al10 from firmware finder app and it successfully installed but I am rebooting my phone its boot on erecovery mode and my frp is locked and the bootloader unlock site is down what can I do ,
Click to expand...
Click to collapse
bootloader unlock code different from frp unlock code.
installing other device firmware has chance to replace oeminfo.img partition. Changing this partitin often causes locked frp.
If lucky you can wipe from the erecovery that is loading. maybe even couple times. Then maybe it will boot. Other that that there has been no public mention of any fix.
do your best to fix it using hisuite or other methods if you can. if you have twrp that can help if you have stock recovery and locked frp your only hope might be hisuite and if that fails you will need a paid option like dc-phoenix or funkyhuewei. i only have experience with dc-phoenix, and it did fix my locked frp completely bricked phone, but i read that funky also works well but is nearly 3 times as expensive. (15€ vs 50€)
[email protected] said:
hello guyz please help I am install bnd L34 firmware ton my bnd-Al10 from firmware finder app and it successfully installed but I am rebooting my phone its boot on erecovery mode and my frp is locked and the bootloader unlock site is down what can I do ,?
Click to expand...
Click to collapse
Hello friend i had done the same i installed L21 firmware from firmwarefinder to my BND-AL10 and same happened my phone was bricked it was directly taking me to the stock recovery but my bootloader was locked and lucky i had Kept my bootloader unlock code with me when the site was up so when i unlocked my bootloader it did factory reset and booted normally and Oreo was installed but the only problem im facing is my build number is still showing the old one which is BND-AL10C675 B161 and i don't have face unlock and ride mode which comes with Oreo i had face unlock with BND-AL10C675 B161 . My frp was unlocked already .
sygladiator said:
Hello friend i had done the same i installed L21 firmware from firmwarefinder to my BND-AL10 and same happened my phone was bricked it was directly taking me to the stock recovery but my bootloader was locked and lucky i had Kept my bootloader unlock code with me when the site was up so when i unlocked my bootloader it did factory reset and booted normally and Oreo was installed but the only problem im facing is my build number is still showing the old one which is BND-AL10C675 B161 and i don't have face unlock and ride mode which comes with Oreo i had face unlock with BND-AL10C675 B161 . My frp was unlocked already .
Click to expand...
Click to collapse
The displayed build number comes from the data part of the update. (Update_*hw_*.zip)
If you reflash again all three files , might be fixed
mrmazak said:
The displayed build number comes from the data part of the update. (Update_*hw_*.zip)
If you reflash again all three files , might be fixed
Click to expand...
Click to collapse
How should i reflash it , can you please provide me the procedure to do so , it would be very helpfull
sygladiator said:
How should i reflash it , can you please provide me the procedure to do so , it would be very helpfull
Click to expand...
Click to collapse
If flashing again is the answer to solve problem. Use my guide here.
You are on Oreo now so use the top portion. "Flash update"
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
mrmazak said:
If flashing again is the answer to solve problem. Use my guide here.
You are on Oreo now so use the top portion. "Flash update"
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
It all goes above my head , what exactly i have to do please elaborate .
sygladiator said:
It all goes above my head , what exactly i have to do please elaborate .
Click to expand...
Click to collapse
I don't want to sound like rude or anything.
But I put it all pretty simple, I thought. Like 4 steps
Download files
Put files on SD card
Install twrp
Install file I shared
If that is over your head, maybe you should not have modify and phone.
mrmazak said:
I don't want to sound like rude or anything.
But I put it all pretty simple, I thought. Like 4 steps
Download files
Put files on SD card
Install twrp
Install file I shared
If that is over your head, maybe you should not have modify and phone.
Click to expand...
Click to collapse
Sorry for silly questions by the way thankyou for your help
There is no other options to install other than installing through twrp???
Will i get OTA updates of my bootloader is unlocked ??
If not then i vl be happy to install RROS 8.1 coz am on oreo that means i have treble support so i can just install it
So far so good
sygladiator said:
Sorry for silly questions by the way thankyou for your help
There is no other options to install other than installing through twrp???
Will i get OTA updates of my bootloader is unlocked ??
If not then i vl be happy to install RROS 8.1 coz am on oreo that means i have treble support so i can just install it
So far so good
Click to expand...
Click to collapse
I know each device has it's own proceedure to, flash and all, and they are similar but different.
So can be confussing
Hello all. My 935f came with firmware XSG for United Arabic Emirates but I am in the UK and would like to flash VOD instead. I tried as soon as I got the phone with odin but got some error (don't remember exactly but f.w. 2 expected 1?). Anyways, 7 days have since passed and I have access to OEM unlock. 2 questions:
1) does the firmware (XSG vs VOD) changes anything at all?
2) if so, how could I flash this without losing OEM unlock.
Thanks a lot!
Flashing firmwares doesn't effect OEM unlock and I'll install Vodafone bloat, go for btu if you're in the uk
ASHLEY117 said:
Flashing firmwares doesn't effect OEM unlock and I'll install Vodafone bloat, go for btu if you're in the uk
Click to expand...
Click to collapse
Thanks for this. Do you just flash using Odin? It won't let me gives some kind of SW Rev error . Can it be because of the baseband? I am on BRG8 with build number BRH1 trying to flash BRF8...
batpoil said:
Thanks for this. Do you just flash using Odin? It won't let me gives some kind of SW Rev error . Can it be because of the baseband? I am on BRG8 with build number BRH1 trying to flash BRF8...
Click to expand...
Click to collapse
G960FXXU2BRGA
Check you'e not trying to downgrade the bootloader as shown highlighted here, check yours in download mode (B:1 or B:2)
*Detection* said:
G960FXXU2BRGA
Check you'e not trying to downgrade the bootloader as shown highlighted here, check yours in download mode (B:1 or B:2)
Click to expand...
Click to collapse
Working fine now, thanks so much for this!!
batpoil said:
Working fine now, thanks so much for this!!
Click to expand...
Click to collapse
:good:
my friend rooted his device but stupidly turned off OEM and now his device won't turn on
I tried looking for an international firmware and flashed it on Odin but it got stuck at recovery.img, been like that for an hour,
Is it because OEM is locked? (so is FRP by the way)
Do I have to enable a setting from Odin?
he has an S9+ G965F dual SIM, he bought it from Spain but says its an international model, he doesn't seem to find the country code anywhere on the box
I need help and everything is appreciated, the sooner the better, thanks!
Check in download mode which version Bootloader the phone is running (B:1 or B:2) and match it with the firmware you are flashing, you cannot downgrade the Bootloader
G960FXXU2BRGA <<< Version 2 BL
Fixed!
*Detection* said:
Check in download mode which version Bootloader the phone is running (B:1 or B:2) and match it with the firmware you are flashing, you cannot downgrade the Bootloader
G960FXXU2BRGA <<< Version 2 BL
Click to expand...
Click to collapse
He managed to fix it himself, I was using Odin with TeamViewer from my computer to his laptop, and I think that messed with something as he repeated the exact same steps after I disconnected and worked flawlessly
Thanks everyone that helped and the community offering help!
Hi there.
I've been stuck with RMM State Prenormal on my Galaxy A8 2018 for 3 months, waiting for this to be gone. Nothing to do, after 3 months of uptime, it still there.
Many tricks with time and date hasn't worked anymore, but finally I just success to bypass this s***.
What I've done :
_Install stock rom from original carrier (BOG for me, I were on XEF for deleting bloatwares).
_At boot, do NOT put your Google account and Samsung account, only Wi-Fi and that's all.
_When install wizard is finished, do NOT activate Developpers Options. Go directly at time and date, set it 8 days before after desactivate "Auto time and date".
_Go to System Update. Then untick "auto update" and check for update.
_Reboot.
_Go back to actual time and date, check again for update.
_Only NOW, activate Developpers Options and OEM Unlock should be there.
It worked for me after MANY MANY tricks, attempts, and hopeless. This way given me another luck to root my phone and now I'm done and free with it.
Sorry if my english is sometimes bad. Hoping I've helped some users.
Regards !
Edit : I did it on bootloader V3 (U3BRJ4).
I hope it actually works with other a530f
because I have a530w and a530w doesn't have rmm prenormal in bootloader, I can't really test this
Yup, canadian and some versions of samsung smartphone (Verizon or something else if I don't mistake ?) doesn't have any method to unlock their bootloaders because they are locked by default and forever. But I've posted it for those who have international variant (SM-A530F for me).
Doghan13 said:
Yup, canadian and some versions of samsung smartphone (Verizon or something else if I don't mistake ?) doesn't have any method to unlock their bootloaders because they are locked by default and forever. But I've posted it for those who have international variant (SM-A530F for me).
Click to expand...
Click to collapse
no, I mean that Canadian variant of a8 is exactly the opposite of what you said, rmm is always unlocked, so oem unlock is always there
and a8 is the only exynos Samsung device in canada so we're lucky we didn't get any snapdragon version or that would be locked forever
Oh, mea culpa. I thought it was like Galaxy S4 who were totally locked (received one from Canada to France, last year, I were disapointed that is not GT I9500 but SGH I337M).
But the result stay the same, this is for unlocked bootloader that can be "locked" by RMM State ^^
Hello, I want to test tous method and I have an dummy question, To install stock rom, I have To flash with Odin an original firmware from sammobile and if it's yes what file I have To flash
Thx
(Sorry for my bad English I'm French ^^)
angy12 said:
Hello, I want to test tous method and I have an dummy question, To install stock rom, I have To flash with Odin an original firmware from sammobile and if it's yes what file I have To flash
Thx
(Sorry for my bad English I'm French ^^)
Click to expand...
Click to collapse
once you downloaded it, extract zip file, then there should be 5 files, dont worry about the HOME_CSC, that leaves us with 4 files, put them in the correct position on odin, AP to AP slot, etc
Hi, I've tried many times with différent BL but nothing To do' OEM doesn't appears and always state Prenormal :/
I'm on bootloader V3
It's a pity that after root we lose all the guarantees through knox
Thread cleaned:
FORUM RULES
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
adek89 said:
It's a pity that after root we lose all the guarantees through knox
Click to expand...
Click to collapse
the only thing that has irritated me so far about knox is losing samsung pay
not correct i'm on a530w and i can't access oem unlock. however i'm frp locked.... anyone know anything i can do to get back into my phone?
vibespredah said:
not correct i'm on a530w and i can't access oem unlock. however i'm frp locked.... anyone know anything i can do to get back into my phone?
Click to expand...
Click to collapse
call samsung or use a third party unlocking service is all im aware of
vibespredah said:
not correct i'm on a530w and i can't access oem unlock. however i'm frp locked.... anyone know anything i can do to get back into my phone?
Click to expand...
Click to collapse
flash stock firmware
ive never turned this thing off for 168 hours and i CAN root it. Prenormal be damned!!
youdoofus said:
ive never turned this thing off for 168 hours and i CAN root it. Prenormal be damned!!
Click to expand...
Click to collapse
Go development settings and if you see the oem and able to check that yes you root.
mchlbenner said:
Go development settings and if you see the oem and able to check that yes you root.
Click to expand...
Click to collapse
oh, i know. this was a statement, not a question
Doghan13 said:
Hi there.
I've been stuck with RMM State Prenormal on my Galaxy A8 2018 for 3 months, waiting for this to be gone. Nothing to do, after 3 months of uptime, it still there.
Many tricks with time and date hasn't worked anymore, but finally I just success to bypass this s***.
What I've done :
_Install stock rom from original carrier (BOG for me, I were on XEF for deleting bloatwares).
_At boot, do NOT put your Google account and Samsung account, only Wi-Fi and that's all.
_When install wizard is finished, do NOT activate Developpers Options. Go directly at time and date, set it 8 days before after desactivate "Auto time and date".
_Go to System Update. Then untick "auto update" and check for update.
_Reboot.
_Go back to actual time and date, check again for update.
_Only NOW, activate Developpers Options and OEM Unlock should be there.
It worked for me after MANY MANY tricks, attempts, and hopeless. This way given me another luck to root my phone and now I'm done and free with it.
Sorry if my english is sometimes bad. Hoping I've helped some users.
Regards !
Edit : I did it on bootloader V3 (U3BRJ4).
Click to expand...
Click to collapse
My friend i try this method also TWRP installed done but when i wipe and format after that still same so please can u tell me what must i do?
i have this file G955FXXU4CRL3 i followed this both post
1st This
2nd this
but still same to same now please give me perfect and working solution.
Thx
Yah, but how to install stock rom from original carrier if we cannot flash it by odin ? As longer oem unlock is not there any more to activate it ? And nothing go throu odin no root no rom or custom recovery ?
Pro Cal said:
Yah, but how to install stock rom from original carrier if we cannot flash it by odin ? As longer oem unlock is not there any more to activate it ? And nothing go throu odin no root no rom or custom recovery ?
Click to expand...
Click to collapse
You don't have oem unlock to use Odin.
i decided to flash global rom on my china device and i have downloaded both china and global fastboot rom of same version.
i have already checked my ARB status and its null.
i have to wait 11 more days to unlock my bootloader.
Let me know if there is anything else i need to do ..
ONE more thing, why is china rom is larger in size than global as they are same version.?
is there any thing i need to concern about?
an image is given below.
help me guys. Dont want to brick my phone so asking you for guides.
imzihad said:
i decided to flash global rom on my china device and i have downloaded both china and global fastboot rom of same version.
i have already checked my ARB status and its null.
i have to wait 11 more days to unlock my bootloader.
Let me know if there is anything else i need to do ..
ONE more thing, why is china rom is larger in size than global as they are same version.?
is there any thing i need to concern about?
an image is given below.
help me guys. Dont want to brick my phone so asking you for guides.
Click to expand...
Click to collapse
Firstly u need to unlocked bootloader. Extract both file. Then copy flash_all.bat China n replace to indian ROM. Again copy rbv.img from China images n paste to indian images. Flash it in clean all. After successful flashing u stuck in recovery mode, don't worry u need to unlock bootloader again. Remember ur Mi account n password.
U will get latest global update v 10.2.4.0. tnx
Rabei Khaba said:
Firstly u need to unlocked bootloader. Extract both file. Then copy flash_all.bat China n replace to indian ROM. Again copy rbv.img from China images n paste to indian images. Flash it in clean all. After successful flashing u stuck in recovery mode, don't worry u need to unlock bootloader again. Remember ur Mi account n password.
U will get latest global update v 10.2.4.0. tnx
Click to expand...
Click to collapse
So, am i authorised to unlock bootloader twice at the same time from my account?
I heard you can unlock bootloader once in a month from one account.
please clearify this
imzihad said:
So, am i authorised to unlock bootloader twice at the same time from my account?
I heard you can unlock bootloader once in a month from one account.
please clearify this
Click to expand...
Click to collapse
I bought redmi 6 pro china version(Rs. 9,000 only) on 23rd nov 2018, n i unlocked it on 22nd dec 2018. Then i flashed indian rom successfully in clean all option on 5th january 2019, but stuck in recovery mode then i try to unlocked bootloader again it successful. I using Same mi account n password. Now i m using indian rom version. Tnx
Rabei Khaba said:
I bought redmi 6 pro china version(Rs. 9,000 only) on 23rd nov 2018, n i unlocked it on 22nd dec 2018. Then i flashed indian rom successfully in clean all option on 5th january 2019, but stuck in recovery mode then i try to unlocked bootloader again it successful. I using Same mi account n password. Now i m using indian rom version. Tnx
Click to expand...
Click to collapse
OK got that.
i will unlock on 31 jan.
imzihad said:
OK got that.
i will unlock on 31 jan.
Click to expand...
Click to collapse
R u flash indian rom .
Rabei Khaba said:
Firstly u need to unlocked bootloader. Extract both file. Then copy flash_all.bat China n replace to indian ROM. Again copy rbv.img from China images n paste to indian images. Flash it in clean all. After successful flashing u stuck in recovery mode, don't worry u need to unlock bootloader again. Remember ur Mi account n password.
U will get latest global update v 10.2.4.0. tnx
Click to expand...
Click to collapse
doesnt work on my phone...
it stuck on recovery as you said but i cant unlock it...
said my account not bound to device
djpsycho666 said:
doesnt work on my phone...
it stuck on recovery as you said but i cant unlock it...
said my account not bound to device
Click to expand...
Click to collapse
Reverse to cn rom n checked mi account is locked or unlocked. Or u need to check in developer option too. If ur mi account is unlocked there is no problem. But mi account is locked u need to unlocked it again. Tnx
Rabei Khaba said:
Reverse to cn rom n checked mi account is locked or unlocked. Or u need to check in developer option too. If ur mi account is unlocked there is no problem. But mi account is locked u need to unlocked it again. Tnx
Click to expand...
Click to collapse
bootloader unlocked,mi account unlocked,but after flashed global it stuck recovery and you said i need to unlock the bootloader again,but said on miflash account not bount to device...checked on adb cmd said bootloader is locked again,but when i revert to china rom bootloader is unlocked..
i used miui 10.0.2.0 both china and global india..
is there a spessific flashtool or mi unlock tool i need to use?
djpsycho666 said:
bootloader unlocked,mi account unlocked,but after flashed global it stuck recovery and you said i need to unlock the bootloader again,but said on miflash account not bount to device...checked on adb cmd said bootloader is locked again,but when i revert to china rom bootloader is unlocked..
i used miui 10.0.2.0 both china and global india..
is there a spessific flashtool or mi unlock tool i need to use?
Click to expand...
Click to collapse
I also faced bootloop after flashing indian rom.
after flash, my bootloader locked on its own! and when i again tried to unlock it, i was given 30 days waiting period.
So, i had to edl flash my device from local servicing center.
djpsycho666 said:
bootloader unlocked,mi account unlocked,but after flashed global it stuck recovery and you said i need to unlock the bootloader again,but said on miflash account not bount to device...checked on adb cmd said bootloader is locked again,but when i revert to china rom bootloader is unlocked..
i used miui 10.0.2.0 both china and global india..
is there a spessific flashtool or mi unlock tool i need to use?
Click to expand...
Click to collapse
Clean all option only when u flash indian rom. Use latest mi flashtool. I used miflashtool latest. Try again.
djpsycho666 said:
bootloader unlocked,mi account unlocked,but after flashed global it stuck recovery and you said i need to unlock the bootloader again,but said on miflash account not bount to device...checked on adb cmd said bootloader is locked again,but when i revert to china rom bootloader is unlocked..
i used miui 10.0.2.0 both china and global india..
is there a spessific flashtool or mi unlock tool i need to use?
Click to expand...
Click to collapse
Check in developer option OEM is unlocked
Code:
[img]https://drive.google.com/file/d/1G_upocsZIoXfkZE1oD7Wbg2TU1Y9xrV3/view?usp=drivesdk[/img]
Rabei Khaba said:
Check in developer option OEM is unlocked
Code:
[img]https://drive.google.com/file/d/1G_upocsZIoXfkZE1oD7Wbg2TU1Y9xrV3/view?usp=drivesdk[/img]
Click to expand...
Click to collapse
too many missing variables there...i just did it my own way...
https://forum.xda-developers.com/redmi-6-pro/how-to/tutorial-how-to-flash-global-india-rom-t3898834
a
Rabei Khaba said:
Firstly u need to unlocked bootloader. Extract both file. Then copy flash_all.bat China n replace to indian ROM. Again copy rbv.img from China images n paste to indian images. Flash it in clean all. After successful flashing u stuck in recovery mode, don't worry u need to unlock bootloader again. Remember ur Mi account n password.
U will get latest global update v 10.2.4.0. tnx
Click to expand...
Click to collapse
hi
thanks
it worked for me ( i copy and replace all global file to Chinese rom folder )
i flash 11.0.5 India global on Chinese redmi 6 pro
the wait for 30 days (unlock limit time) ( i think if i change to new mi account before flash then doesn't need wait 30 days )
then my phone convert to global
i test ota update it to 11.0.7 ( on unlock phone) it worked too ( beacuse i heard if I lock converted phone and Update, it will breaked !! )
.
Rabei Khaba said:
Firstly u need to unlocked bootloader. Extract both file. Then copy flash_all.bat China n replace to indian ROM. Again copy rbv.img from China images n paste to indian images. Flash it in clean all. After successful flashing u stuck in recovery mode, don't worry u need to unlock bootloader again. Remember ur Mi account n password.
U will get latest global update v 10.2.4.0. tnx
Click to expand...
Click to collapse
So thank you verymuch. I try and success. Very very thank you. You are God of my life