Yu Yureka Sleep of death issue - YU Yureka General

Hi Guys,
I have Yu yureka (A05510) model
System OS : 12.1 Stock rom
> It was working fine but i had issue with my proximity sensor which is broken & always shows calibration fail
> So i decided to disable sensor by flashing XPOSED FRAMEWORK SDK22/arm64/v89 but i got no space left error & the installation got failed
> Following that I was not able to install any apps on my phone & used to get 504/503 error in google play
> So i flashed XPOSED UNINSTALLER.zip now the apps are installing fine but when ever my phone goes to sleep it worn turn on & i have to hold power button for more than 15 seconds which then restarts my phone & this issue occurs every time my phone goes into sleep...
To recover from this problem -
Things i have done -
1) I went to TWRP recovery & did recovery of the previous system file but sleep of death still persist
2) I did factory reset & wipe everything including internal sd card & also installed new OS ( Nitrogen OS 8.1.0) still the issue is persisting
3) Now i am using SOD killer which keeps the cpu running in the background & doesn't allow the phone to go into sleep, so the phone is working fine but it drains lot of my battery
Any way to solve this problem...?
Please help with this issue, There are many people with sleep of death issue & i was not able to find a solution
Thank you guys
Any help would be helpful to me

reflash the stock firmware..

Related

G pro, spyware

To start off,
i would like to say im not some kind of paranoid freak who thinks the gov or ordinary people around me is spying on me.. lol
Im fairly new to this android world, and got this phone, less than a month ago. from a ... doubtful friend.
The phone always booted twice on startup, and it installed apps with out telling me like "Muted camera".,,which i caught probally by rebooting the
phone right after reset. and a error popping up, that the install file was invalid.
I rooted it (I think.. I rooted it.. or could be PRE rooted. Never checked) ,
checked system but couldn't find out anything useful..
i deleted all the dalek? cache and factory reset, formatted external sd in cwm
but still.. freaked out when i found out that my personal files.. such as photos videos were still present (was on the internal memory)
the external, was formatted..
so i got the lg firmware update on pc
put the kdz file,
settings were:
3g QCT & mode was CS emergency
ran it in Download mode.
Still.. this seemed to only reset the system settings..
the phone itself wasn't wiped..
However, after i reset it with kdz file
The security? error of some sort popping up between the two reboot, was gone. however the two reboot was still present,.
Before;
Turn on phone => security error, (in terminal typed ..interface with black background) => phone shutdown => boot again automatically => LG logo => turn on
After the kdz file recovery:
Turn on phone => Lg logo => phone off => on again automatically with lg logo => lg boot animation and normal booting
Now, my ram and battery usage is still abnormal.
resetted the phone in software os level, (in settings)
Nothing.. seems to help
any.. suggestions?;;

Phone not Works after Reset

My mobile is Micromax AQ 4501(canvas a1) on Android One operating system.I had Android 5.1.1 Lollipop.I accidently uninstalled Google Play Services app.Then I had many problems.I found no play services' apk works with my phone and I reset the phone.After reset os starts nd sometimes show black blank screen and sometimes begin to optimize apps.After optimization complete there appears option to select language (rarely).Then I connected with my wifi but its checking connection for a long time.I checked it with mobile data and same problem occurs.No homepage is starting.I gnt know what to do.Please help me out of this.I need my phon e back to work.
Sometimes after optimization completes the os begin to restart nd the optimization again happens.this continues like cyclic process.
Just give me any way to reinstall os(android one based) manually
Flash the stock ROM
Go to the thread
http://forum.xda-developers.com/crossdevice-dev/android-one-general/rom-t3120737
Don't forget to press thanks if helped

LG G4 half-bricked / full unusable

Hi everybody !
I usually (always normally) succeed myself at resolve my phone problems, but this time I can't do anything.
My problem :
I have a LG G4 ; I saw an update of Imperium Rom (v8) this morning, so I installed it, everything worked well until I decided to install a, apparently, ****ed mod on xposed ; and since I have rebooted I can't do anything ; the LG logo shows and just after "UI system as stopped", just one time but, then I can't do anything, screens over screens, can't access parameters, password required, "flex mode" (never saw this before), re-password, system UI restart, loading background, restart system UI; and this in a infinite loop SOOOOO
I decided to reset it, yeah... But I can't access my recovery, wow o/
I followed the step to access it by switch it off and press volume down etc --> It just boot normally, or best in safe mode by magic but same problem ; via parameters but I can't access parameters ; and via ADB buuut my phone isn't recognized even with the complete sdk, drivers, everything you want, there's nothing to do because --> while restarting system UI it deconnects so of course it can be recognized
I removed xposed (while I could still access recovery, as I was thinking it was coming from the xposed module) and so now I can't even access recovery via shutdown menu (as I had put "reboot to recovery" in via Xblast, a xposed module) ; and of course it doesn't change anything
I neeeeed your help so much, I don't mind losing what's on it :crying:
Naerade said:
Hi everybody !
I usually (always normally) succeed myself at resolve my phone problems, but this time I can't do anything.
My problem :
I have a LG G4 ; I saw an update of Imperium Rom (v8) this morning, so I installed it, everything worked well until I decided to install a, apparently, ****ed mod on xposed ; and since I have rebooted I can't do anything ; the LG logo shows and just after "UI system as stopped", just one time but, then I can't do anything, screens over screens, can't access parameters, password required, "flex mode" (never saw this before), re-password, system UI restart, loading background, restart system UI; and this in a infinite loop SOOOOO
I decided to reset it, yeah... But I can't access my recovery, wow o/
I followed the step to access it by switch it off and press volume down etc --> It just boot normally, or best in safe mode by magic but same problem ; via parameters but I can't access parameters ; and via ADB buuut my phone isn't recognized even with the complete sdk, drivers, everything you want, there's nothing to do because --> while restarting system UI it deconnects so of course it can be recognized
I removed xposed (while I could still access recovery, as I was thinking it was coming from the xposed module) and so now I can't even access recovery via shutdown menu (as I had put "reboot to recovery" in via Xblast, a xposed module) ; and of course it doesn't change anything
I neeeeed your help so much, I don't mind losing what's on it :crying:
Click to expand...
Click to collapse
Please ensure you REALLY use the correct key combo! Just saying bla does not tell us what exactly you tried.
If you really can't get in you can try to Boot into download mode
https://m.youtube.com/watch?v=0cbLhpWq5C8
Then use lgup to reinstall stock ROM and do all the stuff again to get twrp, root and a custom ROM.
Naerade said:
Hi everybody !
I usually (always normally) succeed myself at resolve my phone problems, but this time I can't do anything.
My problem :
I have a LG G4 ; I saw an update of Imperium Rom (v8) this morning, so I installed it, everything worked well until I decided to install a, apparently, ****ed mod on xposed ; and since I have rebooted I can't do anything ; the LG logo shows and just after "UI system as stopped", just one time but, then I can't do anything, screens over screens, can't access parameters, password required, "flex mode" (never saw this before), re-password, system UI restart, loading background, restart system UI; and this in a infinite loop SOOOOO
I decided to reset it, yeah... But I can't access my recovery, wow o/
I followed the step to access it by switch it off and press volume down etc --> It just boot normally, or best in safe mode by magic but same problem ; via parameters but I can't access parameters ; and via ADB buuut my phone isn't recognized even with the complete sdk, drivers, everything you want, there's nothing to do because --> while restarting system UI it deconnects so of course it can be recognized
I removed xposed (while I could still access recovery, as I was thinking it was coming from the xposed module) and so now I can't even access recovery via shutdown menu (as I had put "reboot to recovery" in via Xblast, a xposed module) ; and of course it doesn't change anything
I neeeeed your help so much, I don't mind losing what's on it :crying:
Click to expand...
Click to collapse
can it enter download mode.. if so use LGUP and KDZ file.
to enter download mode press vol key up connect usb. youll see it on screen. then flash it using KDZ
raptorddd said:
can it enter download mode.. if so use LGUP and KDZ file.
to enter download mode press vol key up connect usb. youll see it on screen. then flash it using KDZ
Click to expand...
Click to collapse
Thank for your answer ! No it couldn't even boot in download mode
I resolved my problem by forcing again the buttons to reset completely, it finally showed me after about 30 boots or more the reset screen, I said "ok" ; and in fact it just rebooted saying "updating Android", I did not lost anything.
I still don't understand how it happened but anyway !
I don't know if it's possible to set the topic as resolved ? I don't find it

Firmware Update to Marshmallow - GPS Stopped Working

Hi!
I've made a post in the Asus forum, with no luck and I found this page where you seem more technical :
Two days ago I downloaded the Android MM 6.0 update from the Asus Homepage downloading the version WW-4.21.40.144 , since I live in Brazil and the phone was bought here. I followed all the steps one by one till it got updated.
The problem is, since then my GPS is not working (Waze, Googlemaps ans several apps).
I tryed:
1. Giving all permissions of location to the apps
2. Puting the settings in High Accuracy
3. Restarting the phone several times.
4. Switch on and off Airplane mode and 2G 3G ands 4G (I read sometimes its interference from that)
5. Waiting almost an hour with the phone outside (sunny day) to see if it detects the satellites.
6. Every app inthe appstore that promise GPS Fixing (reseting, A-GPS and all kind of tests. Funny thing, the sensor IS working acording to those apps.
7. Factory Reset
8. Factory Reset and Erase Cache from the bootmenu. (as indicated in the Asus Forum)
9. Downgraded to Lolipop again. WW-52.20.40.196
10. Again every app to reset the GPS.
Nothing worked.
To my surprise, now I have Lolipop and no GPS. So back to basics but, worst.
The Asus forum told me to Update to the latest version, which I did:
1. Updated my phone with the latest MM version. 4.21.40.223.
2. Put the location options in "High Accuracy" and permissions needed for the apps.
3. As the old software was installed after that, I tried Waze. No GPS Signal was found.
4. Did a factory reset.
5. Put the location options in "High Accuracy" and permissions needed for the apps
6. Installed the apps GPS Toolbox and Waze again, the both can't find a GPS signal. I left the phone outside for 10 minutes.
7. Tried to install the version UL-Z00A-WW-2.20.40.198-user by bootloader, but it says it cannot update to an older version, which sounds about right. (I had to try)
What else can I do? I don't mind going back to Lolipop, but when I did GPS didn't work.
Is there any chance the new Update wrote something apart from software in the chipset that cannot be undone?
Help please, I really need the GPS!
Phone not rooted.
Thanks!
Juan
After long hours of searching, reading and trying I got it fix. How?
0. Have a full charged battery or have your phone plugged to the wall (except for the USB stuff on step number 2, obviously)
0.1. Make backups of all the info in the phone, because everything is going to be erased.
1. Download the version WW-52.20.40.196 from Asus website.(unless you need the other like CN, JK, etc, see Asus site to be sure)
2. Copy it to the internal storage of your phone in the root of it (not in any folder), via USB.
3. Get to the boot loader (Turn off phone and once is off, push the power button with the Up volume one until it vibrates 2 times. Release only the power button until the menu appears) - Search the forum for more details.
4. Select "Recovery Boot" with the volume buttons and press the power button to confirm.
The next steps are all in the Recovery Menu (once it finishes every step it goes back to the original menu, no alerts, sounds or nothing. So check every now and then)
5. Make a Wipe/factory reset, and wait, it takes some time. (use the volume buttons and press the power button to confirm)
6. Make a Wipe of the cache. (use the volume buttons and press the power button to confirm)
7. Install update from Internal storage selecting the name of file you copied on step number 2 (use the volume buttons and press the power button to confirm). It will take a while.
8. Reboot the system (use the volume buttons and press the power button to confirm)
It will restart with the phone in the Lolipop version and the GPS working fine. Even after the Lolipop updates.
Marshmallow update has a bug, that at least with my phone the GPS doesn't work. Tried reinstalling marshmallow latest version after the GPS got fix, just to prove the point, and in fact, it stopped working again.
Then I did all the steps above again and went back to normal again.
I STRONGLY RECOMMEND NOT TO UPDATE TO MARSHMALLOW WITH THE ACTUAL FIRMWARE VERSIONS AVAILABLE.
I also had this problem with Marshmallow ROM, as the GPS is not working in terms of unable to locate any signal from satellites.
However, I also solved the problem with a method sounds very silly.
I turn on my GPS overnight using an application called GPS Status.
The night I turn it on, it was locating 0 satellite (it will write 0/0 SAT). However in the morning, I found that the GPS is now working, locking on 8 out of 24 discovered satellite (it wrote 8/24 SAT).
Now my GPS is working seamlessly.
Thanks! I will try it next weekend. I need my phone this week. Hahaha
I ll post when I do so.
Do you know other similar cases of people who did that and worked?
The thing is, now I have Lollipop again an I noticed how slow the system is running with applications. I d love to have the update, but not sacrificing the GPS
I decided I won't make the test because it doesn't justify the risk and time.
I'll wait for a newer update or just stay with Lollipop.
Just to let you guys know in case someone was waiting for this
I downloaded GPS Status as suggested by SleepingAran and ran it once. Now my Waze is working seamlessly. Thanks!
There's another simple solution that works:
Follow exact steps:
1. Turn on location and set high accuracy mode
2. Open google maps
3. Move your phone several times in the shape of 8 (8-10 times should be enough)
4. Close google maps and clear it from recents screen
5. Start google maps again. Profit
Credits: @say99
If nothing helps, please take a look on my post here.

forced factory data reset, and setup wizard not working

Hey everyone, I unbricked my moto g4 this morning, after replacing a corrupted sd card. I installed lineage os 15.0 and micro gapps for android oreo, however, when I booted I received a black screen and a notification that the setup wizard had stopped. this notification was looped so when I clicked close app, it would pop up again. I booted into factory mode, disabled the setup wizard and moved past that problem only to face another one: When I received phone calls, i would get an "advanced settings has stopped" and go into a forced factory reset. after a little experimentation, the phone did not reset every time I received a call, and I stopped receiving the advanced settings error after turning advanced settings off. In an attempt to fix the problems that just kept popping up, i tried another factory reset, but now I'm receiving the same problem I first had: a black screen and the set up wizard has stopped notification, except now, I can't boot into factory mode and solve it. Is this a common problem with an easy solution? or can somebody help me out? I have twrp and bootloader mode, but that's all i can access from my phone right now.
jpmuri said:
Hey everyone, I unbricked my moto g4 this morning, after replacing a corrupted sd card. I installed lineage os 15.0 and micro gapps for android oreo, however, when I booted I received a black screen and a notification that the setup wizard had stopped. this notification was looped so when I clicked close app, it would pop up again. I booted into factory mode, disabled the setup wizard and moved past that problem only to face another one: When I received phone calls, i would get an "advanced settings has stopped" and go into a forced factory reset. after a little experimentation, the phone did not reset every time I received a call, and I stopped receiving the advanced settings error after turning advanced settings off. In an attempt to fix the problems that just kept popping up, i tried another factory reset, but now I'm receiving the same problem I first had: a black screen and the set up wizard has stopped notification, except now, I can't boot into factory mode and solve it. Is this a common problem with an easy solution? or can somebody help me out? I have twrp and bootloader mode, but that's all i can access from my phone right now.
Click to expand...
Click to collapse
Your best bet is to post this question within one of the following threads.
http://forum.xda-developers.com/showthread.php?t=3672940
http://forum.xda-developers.com/showthread.php?t=3669431
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Lineage OS 7.1.2 setup wizard crash
After a number of wipes, restarts, permission changes (all failed) I solved the problem by simply updating the ROM in the system settings menu. Go figure....

Categories

Resources