hello all,
my lenovo P2, has it's ultimate power saving mode turned on whilst the button for turning it on/off is not working.
I tried factory resetting the device after which the power saving mode is still on.
Is there any way to bypass the ultimate power saving mode ?
Thanks in advance, Reinier
Install custom rom, cuz many custom roms does not support it.
It seems to be, that this switch is damaged and need to be repaired.
sergsinger said:
It seems to be, that this switch is damaged and need to be repaired.
Click to expand...
Click to collapse
I thought it already so only I told to change the rom...
reinierkof said:
hello all,
my lenovo P2, has it's ultimate power saving mode turned on whilst the button for turning it on/off is not working.
I tried factory resetting the device after which the power saving mode is still on.
Is there any way to bypass the ultimate power saving mode ?
Thanks in advance, Reinier
Click to expand...
Click to collapse
Flash stock rom
Flashing stock Rom won't solve anything..sjnce it seems to be a Hardware issue.
He should give custom roms without op key support a try. Miss Valeria already suggested that
Related
HI everyone. I have a problem with my xperia arc.
My menu button isstucked, so every time i boot the phone it is on "Safe Mode" (no 3rd party apps).
Is there some way of disable safe mode using a custom ROM?
TY!
zeCosta said:
HI everyone. I have a problem with my xperia arc.
My menu button isstucked, so every time i boot the phone it is on "Safe Mode" (no 3rd party apps).
Is there some way of disable safe mode using a custom ROM?
TY!
Click to expand...
Click to collapse
I have the same problem!
Hi guys,
Don't know if this will help, but it's an idea.
Maybe it is worth trying to open up the phone to see if you can un-stick or disable the button.
Here's a tutorial to change the cover of the phone - http://forum.xda-developers.com/showthread.php?t=1800226
It involves taking the phone apart and putting it back together again.
So when it is apart you can see why the button is stuck, and think about a fix.
I hope this works - otherwise
Good luck
Hi guys,
The hardware buttons on the Wildfire S (power and volume buttons) have stopped working and I need to turn the phone on. The phone's running stock rom and it's not rooted. Is there any way I can turn it on without using the power button?
You can root your phone but.. without power buton maybe it's impossibe, you can give your phone to service. If your power button works, you can install a custom rom
burakustun said:
You can root your phone but.. without power buton maybe it's impossibe, you can give your phone to service. If your power button works, you can install a custom rom
Click to expand...
Click to collapse
Thanks for your reply The thing is I've got another phone and I just need to turn this old guy on to get some of the stuff I need from it.
After flashing CM 12 on Xperia M, I have encountered this problem. After using the phone without locking down the phone, it works fine, as soon as I lock the phone, within 5-10 minutes the phone doesn't wake up on pressing power button. It will only turn on when I remove the battery and insert it again but that is just temporary solution. What is the reason for this? Is the battery faulty, or the processor is underclocked or kernel related problem? Please tell me the cause of this problem and way to fix it.
Recently I re-flashed the phone with CM 13 but same thing continues
It sounds like a hardware fault. Are you using a custom kernal or stock?
Lewdog45 said:
It sounds like a hardware fault. Are you using a custom kernal or stock?
Click to expand...
Click to collapse
I don't have much idea about kernel, all I can say is that I am using Custom ROM (CM 13) and I have not tweaked with kernels
shiladitya_saha said:
I don't have much idea about kernel, all I can say is that I am using Custom ROM (CM 13) and I have not tweaked with kernels
Click to expand...
Click to collapse
Hmm... So you haven't played around with your processor or anything thing like that? Also this could be an Xposed Module interfering with your device?
Lewdog45 said:
Hmm... So you haven't played around with your processor or anything thing like that? Also this could be an Xposed Module interfering with your device?
Click to expand...
Click to collapse
I have not tweaked the processor, neither used Xposed modules. Apparently IMEI number is missing after flashing custom ROM.
shiladitya_saha said:
I have not tweaked the processor, neither used Xposed modules. Apparently IMEI number is missing after flashing custom ROM.
Click to expand...
Click to collapse
as your IMEI missing, i will suggest you to Flash Stock ROM and then move to custom ROM....
but first open your battery cover and check is there anything, which may blocks you from pressing power key.., clean button area with Dry cloth...
I am facing a similar issue with c2004. The power button works..... but it can be used only to switch on from the off state....... after the phone is in switched [ON mode] power button does not work (waking and switching off the device's display) or powering off the device...
The device had Sony stock JB4.3........ I thought it was a software issue.... then I unlocked and updated to CM13 but the problem persisted...
It seems to be a hardware issue.... may be related to power button(may be power switch struck in ON mode)... One more issue is there..... I cannot charge the phone or connect to PC when the phone is [ON mode]....... first I have to properly shut it down (power off).... then I switch it on with power button and in a few seconds I have to connect charger or connect to a PC... only than it will charge or connect to PC.
For using switching the display on/ off and powering off the device....... I have swapped the camera and power button.....
So.... can anyone shed light..... to what could be wrong and the solution....
Thanks....
DibyenduMaji said:
as your IMEI missing, i will suggest you to Flash Stock ROM and then move to custom ROM....
but first open your battery cover and check is there anything, which may blocks you from pressing power key.., clean button area with Dry cloth...
Click to expand...
Click to collapse
Thanks, I flashed the device with Stock ROM and everything is working fine (didn't flash CM 13 later though). Latest flashtool refused to detect the device (Xperia M) with CM13 installed but then I used the older version of flashtool 0.9.18.6 and it worked like a charm!
ijsa said:
I am facing a similar issue with c2004. The power button works..... but it can be used only to switch on from the off state....... after the phone is in switched [ON mode] power button does not work (waking and switching off the device's display) or powering off the device...
The device had Sony stock JB4.3........ I thought it was a software issue.... then I unlocked and updated to CM13 but the problem persisted...
It seems to be a hardware issue.... may be related to power button(may be power switch struck in ON mode)... One more issue is there..... I cannot charge the phone or connect to PC when the phone is [ON mode]....... first I have to properly shut it down (power off).... then I switch it on with power button and in a few seconds I have to connect charger or connect to a PC... only than it will charge or connect to PC.
For using switching the display on/ off and powering off the device....... I have swapped the camera and power button.....
So.... can anyone shed light..... to what could be wrong and the solution....
Thanks....
Click to expand...
Click to collapse
In my case, flashing the device with stock rom resolved the issue, try flashing your device with appropriate firmware, with an old flashtool to Stock ROM, that might solve your problem
Everything has been tried but failed. The volume buttons do not work. ( Ever since safety mode of the phone) . If I connect to the computer , then flashes red and green and then nothing (this is when the phone is switched off). Pls help me! :,(
Sry form bad english!
hey there! actually the safe mode is opened because you are pressing the key combination of safe mode at the boot ! i suggest try removing back cover as you may have issue with the buttons ! this would fix it.. tell me if it doesnt
ojas12345 said:
hey there! actually the safe mode is opened because you are pressing the key combination of safe mode at the boot ! i suggest try removing back cover as you may have issue with the buttons ! this would fix it.. tell me if it doesnt
Click to expand...
Click to collapse
thx for reply
Hi!
You think that is stuck on the volume button?
prosniper0236 said:
thx for reply
Hi!
You think that is stuck on the volume button?
Click to expand...
Click to collapse
yes you got me right some problem is with your hw keys,they are automatically getting pressed by something
I want to use custom rom in samsung A50 indian version. so i install twrp through boot loader. and then
i wipe all data and system data then suddenly it power off. now i can not get into recovery and download
mode. it continuous bootlopping. i need help. i uses all the solutions -
power on + volume up
power on + volume down
power on + both volume up and down
volume up + volume down while connecting to pc
then
i am waiting for draining the battery then uses all the solutions but does not get into recovery or download
mode. and its already continuous bootlooping.
please, help me sir i have only one mobile phone.
please give me the best solutions.
either i change their motherboard.
nitin_42 said:
I want to use custom rom in samsung A50 indian version. so i install twrp through boot loader. and then
i wipe all data and system data then suddenly it power off. now i can not get into recovery and download
mode. it continuous bootlopping. i need help. i uses all the solutions -
power on + volume up
power on + volume down
power on + both volume up and down
volume up + volume down while connecting to pc
then
i am waiting for draining the battery then uses all the solutions but does not get into recovery or download
mode. and its already continuous bootlooping.
please, help me sir i have only one mobile phone.
please give me the best solutions.
either i change their motherboard.
Click to expand...
Click to collapse
hello friends, i am having great news that my phone is recovered safely.
i went to the local smartphone software installer shop and he has the paid
software for flashing the stock rom.
he does not press any buttons of the smartphone only he connects the type c cable
to smartphone and other end to his laptop and the mobile phone is automatically gone
to the download mode then he install stock software through odin3.
if anyone getting this problem he or she go to the local software shop to
reinstall the stock rom.