Following 7.1 releases,Vanir will use Substratum as it's default theme engine
Vanir follows AOSP Upstream and mainly focuses on performance Tuning Android.
Features
Customizable Navbar
Customizable Statusbar
Customizable Power Menu
Customizable Quick Settings Panel
Heads Up (floating) Notifications
Long Press Quick Settings Header Shortcuts (Long Press Locations: Date, Time, Weather, & Battery)
Expanded Desktop Option with Per App Settings
Terminal App - Needs to be enable in Developer Settings
ScreenShot - Power + Volume Down
Advanced Reboot - Enable in Developer Settings
System Profiles - Turn WiFi, GPS, & other features on or off when you enter or leave trigger wifi signal
One hand mode
Ambient display
Auto rotation( 0 , 90, 180,270)
Instructions
Make a backup!
Wipe /system, /data, cache and dalvik cache.
Flash Vanir
Flash Gapps
Reboot to Vanir!
Download
ROM
OpenGapps
SOURCE
VanirAosp github
Vendor tree
Kernel tree
Device tree
Credits :
Team Vanir
ontherunvaro
MR.HACKER5476
XDA:DevDB Information
VANIRAOSP, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
ankit99, MR.HACKER5476
Source Code: https://github.com/VanirAOSP/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: unlocked bootloader
Version Information
Status: Testing
Created 2017-04-28
Last Updated 2017-04-28
Reserved
Screenshots : http://imgur.com/a/dqhwo
And utouch also fully works
And Screencast also works.
yeahh that's the way bro..happy building.
Congoo bro will try it soon and review
Sent from my Z2 Plus using Tapatalk
Nic
Thanks
Hi, thanks for the rom development, appreciate your efforts.
any updates?
Hi All,
I know there are ALOT of Boot Loop Threads and I have lurked through them to try and find a solution to my problem, however to no avail.
I have a MI6 with the global Google Rom 9.x Pie on it. I had a friend help me with the process. However it all of a sudden started "clicking" the power button command and restarting by itself which it would re boot fine. Then it stopped rebooting the ROM and gets 5 seconds into the Google G Logo loading sign and then restarts again. Im not entirely sure what to do here as in order to flash it i would need it to be recognise USB or get it into fastboot mode and wipe the data, but that does the same thing.
I also cant stop it from turning on by itself, it starts up by itself and turns off by itself.
( i have needed to remove links as i need 10 posts which is REALLY annoying... but warranted im sure)
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: 8.4.19
Based On: AOSP
Video of Boot Loop Mi6
https://vimeo.com/292061338
Wrtieup Below.
AEX for Xiaomi Mi 6
This are unofficial builds of AEX ALPHA based on Android Pie 9.0.
Changelog:
*aex upstreams
*fixed xiaomi parts
*updated SDM blobs (wight)
*updated vulkan P blobs (wight)
*kernel upstream to 4.4.155
*improved f2fs compatibility
Special:
You can use f2fs and ext4. You can decide on you own whatever you want to use.
This TWRP is recommended for the build :
Installation:
1: Dirty flash from AEX pie (stay on ext4)
* normal flash the zip as always
2: Clean flash ext4
*reboot to the TWRP and format data + wipe all
*reboot to recovery
*Flash ROM and GApps
*boot
3: Clean flash f2fs (no encryption)
*reboot to the TWRP and format data + wipe all
*reboot to recovery
*select wipe > advanced wipe select cache then select repair or change file system and select F2FS
*Do the same step with Data
(*reboot to recovery)
*Flash ROM and GApps
*boot
Thanks to Vantom and Ahmed Ali
Based on wight554, verevka and demon.
You can joint the telegram group here : t.me/aexmi6
I hope you enjoy AEX, greetings from Germany
XDAevDB Information
[9.0] AospExtended ROM v6.0 ALPHA [UNOFFICIAL], ROM for the Xiaomi Mi 6
Contributors
NeoArian, vantom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: 8.4.19
Based On: AOSP
Version Information
Status: Testing
Created 2018-09-13
Last Updated 2018-09-13
Shanrom said:
Hi All,
I know there are ALOT of Boot Loop Threads and I have lurked through them to try and find a solution to my problem, however to no avail.
I have a MI6 with the global Google Rom 9.x Pie on it. I had a friend help me with the process. However it all of a sudden started "clicking" the power button command and restarting by itself which it would re boot fine. Then it stopped rebooting the ROM and gets 5 seconds into the Google G Logo loading sign and then restarts again. Im not entirely sure what to do here as in order to flash it i would need it to be recognise USB or get it into fastboot mode and wipe the data, but that does the same thing.
I also cant stop it from turning on by itself, it starts up by itself and turns off by itself.
( i have needed to remove links as i need 10 posts which is REALLY annoying... but warranted im sure)
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: 8.4.19
Based On: AOSP
Video of Boot Loop Mi6
https://vimeo.com/292061338
Wrtieup Below.
AEX for Xiaomi Mi 6
This are unofficial builds of AEX ALPHA based on Android Pie 9.0.
Changelog:
*aex upstreams
*fixed xiaomi parts
*updated SDM blobs (wight)
*updated vulkan P blobs (wight)
*kernel upstream to 4.4.155
*improved f2fs compatibility
Special:
You can use f2fs and ext4. You can decide on you own whatever you want to use.
This TWRP is recommended for the build :
Installation:
1: Dirty flash from AEX pie (stay on ext4)
* normal flash the zip as always
2: Clean flash ext4
*reboot to the TWRP and format data + wipe all
*reboot to recovery
*Flash ROM and GApps
*boot
3: Clean flash f2fs (no encryption)
*reboot to the TWRP and format data + wipe all
*reboot to recovery
*select wipe > advanced wipe select cache then select repair or change file system and select F2FS
*Do the same step with Data
(*reboot to recovery)
*Flash ROM and GApps
*boot
Thanks to Vantom and Ahmed Ali
Based on wight554, verevka and demon.
You can joint the telegram group here : t.me/aexmi6
I hope you enjoy AEX, greetings from Germany
XDAevDB Information
[9.0] AospExtended ROM v6.0 ALPHA [UNOFFICIAL], ROM for the Xiaomi Mi 6
Contributors
NeoArian, vantom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: 8.4.19
Based On: AOSP
Version Information
Status: Testing
Created 2018-09-13
Last Updated 2018-09-13
Click to expand...
Click to collapse
Folks I have an update on the phone,
Turns out the phone had a torn ribbon power cable ( manufacturer fault) which was going to go at any minute anyway. So this was not a software issue but a hardware issue.
replied for referencing as this is a common manufacturer fault.
Cheers
Does your power button working properly?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OctaviOS is an AOSP based rom focusing on Unique and Smooth UI with handy features. OctaviOS is a reborn of pie based PearlOS.
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
CLEAN FLASH :
-Reboot to recovery
-Take Backup (Not Necessary)
-Flash your firmware(If required)
-Reboot To Recovery
-Wipe System, Vendor, Cache, Dalvik Cache and Data
-Flash the ROM
-Flash Gapps
-Flash magisk (optional)
-Reboot
:DOWNLOAD
-Lineage OS
-AOSP
-Superior OS
-Pixel Experience
-Extended UI
-Havoc OS
-CrDroid ROM
-Fluid OS
-Others, I forgot to mention
OctaviOS Source
Telegram Group[/SIZE="5"]
REPORTING BUGS!
As soon as the problem occurs, take a logcat!
for more READ THIS
OctaviOS for Xiaomi Redmi S2/Y2
Device: ysl
Maintainer: Tushar Bharti
Build Type: Unofficial
Kernel Source: https://github.com/lostark13/kernel_xiaomi_cannon
ROM OS Version: 11.0
ROM Kernel: Linux 4.9
ROM Firmware Required: Must be on Latest Firmware
Based On: AOSP
Version Information
Status: Stable/Testing
Current Stable Version: 1.0
SELinux Status: Permissive
Release Date: 2020-10-19
XDA:DevDB Information
Octavi-OS For Redmi S2/Y2, ROM for the Xiaomi Redmi S2
Contributors
Lostark13, mahajant99
Source Code: https://github.com/Octavi-OS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: v12.0.2
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2020-10-19
Created 2020-10-19
Last Updated 2020-11-16
Download link is broken, btw.
--
But anyways, it's working PERFECTLY! (just edited the broken link to the project folder https://sourceforge.net/projects/redmiy2-dev)
The only issue I was having, I solved it myself and I'll post here the solution if someone needs it:
- Whatsapp was not reading the QRCODE for the whatsapp.web or whatsapp desktop. All I needed to do was to remove this line from system/vendor/build.prop:
- camera.hal1.packagelist=com.whatsapp, com.instagram.android (or something like that, just search for whatsapp and remove the one with hal1 in it)
whoa android 11 :cyclops:
thanks for sharing! :fingers-crossed:
Snpy1337 said:
Download link is broken, btw.
Click to expand...
Click to collapse
I've fixed it on behalf of the OP. Thanks!
Regards,
shadowstep
Forum Moderator
hello
what's the meaning of
ROM Firmware Required: Must be on Latest Firmware
I'm now on custom rom based on android 10
akheel01 said:
hello
what's the meaning of
ROM Firmware Required: Must be on Latest Firmware
I'm now on custom rom based on android 10
Click to expand...
Click to collapse
Well, i don't know how to say the meaning but before flashing this ROM, i flashed Official MIUI 12 ROM to get the latest firmware then i clean flash this Android 11 ROM
OctaviOS-v1.2-ysl-20201115-1424-GAPPS-Official.zip
CLEAN FLASH :
-Reboot to recovery (OK)
-Take Backup (OK)
-Flash your firmware (I have flashed V12.0.2.0.PEFMIXM as recommended in the RevengeOS 4.0 theme. After that, Mi logo changed to Linux aka Tux logo. And now I can't enter Bootloader Mode )
-Reboot To Recovery (OK)
-Wipe System, Vendor, Cache, Dalvik Cache and Data (OK)
-Flash the ROM (A few seconds after the start of the firmware process, the phone rebooted and hung on the Tux logo. I booted into recovery and saved dmesg.log and recover.log. I looked through the logs, did not notice anything useful, but I can send it if necessary.)
-Flash the ROM again (This time, the firmware process was successful)
-Reboot (OK)
I have been using this ROM for only a few hours, but almost no problems have been found. Of the minuses, I noticed only a light theme in the camera settings with a system dark theme. There is no usual call recording, but probably for this I need to change the dialer. Too much Google for me. I usually install Pico Gapps. Therefore, I changed the launcher to CPL (Customized Pixel Launcher).
P.S. Tux logo is my new bootloader mode, I can use fastboot commands in this mode. I liked the Xiaomi battle bunny better
Been using this for a couple of hours.
General Observations:
As of November 11, Messages will not activate "Bubbles". Maybe it's not on the ROM, but on the app itself. Even if I allow it in the General Notifications Settings (in the Messages settings, there is no Bubbles setting)
Fast and Smooth
Battery good
Good Kernel
Minor Bugs:
Bubbles are working. I tried Textra and Messenger. In multiple conversations, Bubbles become buggy.
Thank you for this amazing rom. Android 11 is wow.
There is a problem I'm facing though. My camera isn't working no matter which camera app I try. This is a big problem for me.
I hope the next update will fix this.
I've been using the latest version (1.3 Official with Cannon+ Kernel built on Dec 1, 2020)
PROS:
Faster and smoother than the previous A11 build
No more freezes and lags (except when I disabled "Restricted Mode" in YouTube Vanced, I had to restart)
Good Battery
Bubbles is better.
CONS:
Play the Bluetooth Settings on the Quick Settings tile when trying to pair a new device. See it goes crazy.
Long-Pressing on the Home Screen and entering the Styles and Wallpaper, and trying to customize the clock, fonts, etc. will not change anything and just force terminate the app. To successfully customize, use the Settings Menu.
First Flash of NikGapps with Google Messages, Bubbles will work. But when you update the Messages app, Bubbles will not work. This is Google's Android fault, not the ROM.
Hello.
Another bug concerning the Google Photos app and the Gallery Go app. Sometimes viewing photos full screnn will show black blank images. But the thumbnail images show the pictures. You have to restart the app or restart the phone to properly view the pictures.
This is concerning the latest 1.3 Build of A11.
netflix not compatible at this ROM ?
On 1.3 :
- Back gesture doesn't functionnal
- When disable Dark theme, it doesn't possible to always re-enable it.
- Transparent QS doesn't functionnal
I have installed 1.2 :
- Very good rom ! Stable and good battery life
- Missing round corner screen setting
- Like mentionned above, whatsapp qrcode reading doesn't work
Hello Its MØHÎT
Here I wnat to test your rom in beta
hi can anyone tell me which devices supported with this rom??
Version 1.2 : Fingerprint doesn't work in application
Question : If I update 1.2 to 1.3, is the google app and store continue to works ? or 1.3 will delete it ?
arslanwarya said:
hi can anyone tell me which devices supported with this rom??
Click to expand...
Click to collapse
This is for redmi y2 /s2
xNiux said:
Question : If I update 1.2 to 1.3, is the google app and store continue to works ? or 1.3 will delete it ?
Click to expand...
Click to collapse
It will continue to work, it's called dirty flash. But clean flash is always best.
Lostark13 said:
OctaviOS is an AOSP based rom focusing on Unique and Smooth UI with handy features. OctaviOS is a reborn of pie based PearlOS.
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
CLEAN FLASH :
-Reboot to recovery
-Take Backup (Not Necessary)
-Flash your firmware(If required)
-Reboot To Recovery
-Wipe System, Vendor, Cache, Dalvik Cache and Data
-Flash the ROM
-Flash Gapps
-Flash magisk (optional)
-Reboot
:DOWNLOAD
-Lineage OS
-AOSP
-Superior OS
-Pixel Experience
-Extended UI
-Havoc OS
-CrDroid ROM
-Fluid OS
-Others, I forgot to mention
OctaviOS Source
Telegram Group[/SIZE="5"]
REPORTING BUGS!
As soon as the problem occurs, take a logcat!
for more READ THIS
OctaviOS for Xiaomi Redmi S2/Y2
Device: ysl
Maintainer: Tushar Bharti
Build Type: Unofficial
Kernel Source: https://github.com/lostark13/kernel_xiaomi_cannon
ROM OS Version: 11.0
ROM Kernel: Linux 4.9
ROM Firmware Required: Must be on Latest Firmware
Based On: AOSP
Version Information
Status: Stable/Testing
Current Stable Version: 1.0
SELinux Status: Permissive
Release Date: 2020-10-19
XDA:DevDB Information
Octavi-OS For Redmi S2/Y2, ROM for the Xiaomi Redmi S2
Contributors
Lostark13, mahajant99
Source Code: https://github.com/Octavi-OS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: v12.0.2
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2020-10-19
Created 2020-10-19
Last Updated 2020-11-16
Click to expand...
Click to collapse
Hi guys, I have created an installer to enable Pulse Notification LED in all Moto E4 roms, then later enable from Settings > Notification > 3dots > LED settings, its ported from the rom link below. Credits/Support is also listed below.
- LED module Ported from here [darklineage-14.1-20200913]- Its already enabled and working without installer
Key features:
Pulse Notification LED now for all custom roms Works (notification & Charging) [ Can be customize led notification light for apps]- if ROM has Notification LED settings.
Diagnose / Support:
Tested ROM: darklineage-14.1-20200913-installer works and doesn't bootloop on this rom. Testing to be done on other roms as well.
Fast Diagnose: Moto_E4_Plus_Custom_Roms.
Slow Diagnose: XDA thread.
Installation: ( Needs testing on fresh individual rom for saving data backup time).
- Backup first... always backup first using Titanium or prefered own way!
- Install zip
-Enjoy!
Important:
-This installer is designed to support only Woods 60/62 Mediatek variant.
-If Installer shows error post the log here or a screenshot of twrp. It could be that your device is not yet supported.
-Make Sure that root is available for installation and TWRP.
-Backup Your Data incase of bootloop after 3min, to recover just flash the ROM of the current OS.
Donations:
Not Yet on my thread!
Download:
-Under Finalizing and testing..
WoodsPulseLED - Installer
Contributors
Zumairmhd - Library
Ueufi9 - Installer
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Custom*
Version Information
Status: Alpha
Current Installer Version: v2.0
Stable Release Date: 0000-00-00
Created: 2021-01-20
Last Updated: 2021-01-21
can we have a working download link? or what should we take from darklineage rom? thank you
rom 9 (pie) for Samsung j7 (2016) (smj710mn) (j7xelte)
No bugs..
NFC and fm radio working..(lite versión is Best.. Fix GPS)
Installation and download:
-Do the wipes (Dalvick-cache, cache, data, system, internal) and the format data (yes)
-We install the Rom and once installed without doing a wipe we give it in (Reboot System)
-We configure the Rom wizard and once the Touchwiz Start comes out; we turn off the device and put it in recovery mode
-And now without doing any wipe, we are going to install the Kernel and then we click on (Reboot Recovey)
-For without doing a wipe, we install the Magisk and then we click on (Reboot System) and Enjoy the Rom.
It is recommended to make the information on an Oreo or Pie base that are OnFire, RaptorOs, VenomRom. AND IT DOESN'T WORK ON MODELS OTHER THAN THE J710MN!
The GameApp is in case the games give you problems.
Download:
Installation video:
Credits:
devolper:
all credits go to the developer and the people who helped him including the helios kernel.. i'm just sharing..
Kernel:
helios
Contribution:
GalaxyTeam
Samsung ElectricAr.
Anan1211
System:
Helios core
Root Magisk
Samsung OneUI 1.1
Android 9.0
Support J710MN
Volume panel apk download: (customizable volume panel)
Theme Park apk download: (change android colors)
This file contains my volume panel settings. Just like in the . Image.. (in volume panel top left... Touch the three dots and import settings)
┤Thread Closed├┤Does not qualify for development (see here for details) + no kernel sources provided + insufficient feedback├