Related
Hi All,
Was wondering if anyone knows the maximum current the SGS2 can draw for charging purposes. I had a look at the wall charger provided with it, and it's 0.7a; it takes forever (my opinion) to charge compared to my last phone. Just wondering if it is worth my while investing in a more powerful charger.
Cheers
If you take the battery out and look and the sticker then it says there 1000mA
Excellent thanks; Can't get the back off my phone (fingernails).
oozrafa said:
If you take the battery out and look and the sticker then it says there 1000mA
Click to expand...
Click to collapse
Also, at the start of the SGS2 charging cycle, my wall-plug power meter reads 5.1 W.
5.1 is what the adapter is pulling. All of that isn't getting to the phone. Funny thing for my is the phone charges faster off my blackberry 0.75a charger then it does off my Galaxy I 1a charger.
Sent from my GT-I9100 using XDA Premium App
Someone in another thread mentioned seeing something in the source code about the phone drawing at most 650 mA (instead of a more typical 1000 mA) during charging. If that's the case, a more powerful charger by itself won't help; you'd also need a custom ROM that doesn't limit the charge current.
Does anyone know why Samsung would limit the charge current?
theinstagator said:
Does anyone know why Samsung would limit the charge current?
Click to expand...
Click to collapse
Speculation is that its a heat related problem. Don't want to pull a Sony and have the batteries explode on people... (but again, that's speculation)
Murfle said:
Speculation is that its a heat related problem. Don't want to pull a Sony and have the batteries explode on people... (but again, that's speculation)
Click to expand...
Click to collapse
I also heard that a smaller charging current extends the Li-ion battery's lifetime, even though I'd prefer quicker charging as the battery can be replaced with ease.
I second that. I tried it today with a 1A car charger (USB cig. plug) can't say it made a difference on speed of charge compared to wall one.
Just received my SGSII and the charging is extremely slow. 3+ hours = about 500 mAh, on a 1A wall charger. Never had such a slow charging smartphone before
To change i9100 charging current you have to short r529 or r531
Current limit will change to 1000mA
You can use 2A charger and phone will charge only with 650mA current
But after this short one of those resistors current limit will change to 1A
I use it on my phone and all is fine. Current after change is measured.
Wath this film youtube.com/watch?v=FL71G2YEIHU
Make shortcut of resistor and check your new current and feel the difference.
Is there a logfile, where I can see which charge current is used?
I have the suspicion, that my noname charger is not recognized properly and it only charges with USB current (450mA).
hmm a 1000mA current could be used also for the 2000mAh battery?
Yes, should not depend on the capacity of the battery.
Sent from my GT-I9100 using xda app-developers app
good
thank for all, it help me so much
1000mA is more likely the maximum current that the phone is expected to drain from the battery.
It is not the battery charging current, which is presumably equal to the mentioned 650mA, since the 1650mAh battery charges in about 4 hours.
If the charging current was actually 1000mA, then the 1650mA battery it would charge in 2 hours or so, but as we all know, it is not so, even with a 2A charger.
mine took about 4 hours charge the battery
The charging time depends on the Charger and Rom i use, i havent figured out for what reason.
Sometimes the SGS2 is charged in approx. 1 hour and with other Roms the charging time may take up to 3h.
kirschi said:
The charging time depends on the Charger and Rom i use, i havent figured out for what reason.
Sometimes the SGS2 is charged in approx. 1 hour and with other Roms the charging time may take up to 3h.
Click to expand...
Click to collapse
Definately 650ma, IF the phone detects an High current USB port, otherwise it falls back to lousy 400ma.
You can trick into 650ma always: take a usb cable, cut from the PC plug side the TX/RX cables, on the other side short them on PHONE plug side these two cables.
Phone will now always go into "AC charging mode". Don't worry (too much) for your USB ports, they can all well 1000ma, and the one that cannot will report "high current detected, port disable".
:fingers-crossed:
The Samsung charger adapter which comes in the box is very slow in nature. It take more than 2 hours to charge my phone. I was wondering if I can use the following Nokia brand chargers which are fast chargers?
Nokia Charger Adapter CA-146C
Nokia Fast Micro-USB Charger AC-10
It won't make any difference the phone decides what current it draws from the charger, so it'll take just as long to charge.
Are you really sure about this? Can you link me to some articles which confirm this.
Even I was thinking about purchasing AC-10 charger from Nokia.
How fast is the nokia charger?
0-10% -> 100% in an hour or less?
Joey2o11 said:
It won't make any difference the phone decides what current it draws from the charger, so it'll take just as long to charge.
Click to expand...
Click to collapse
I'm not sure about this. I have a friend with a Blackberry Playbook and he reckons his phone charges much faster if he uses the charger from that.
The "stock" S2 charger is 700mA - it doesn't take a genius to work out that for a 1650mAh battery this will take about 2.5 hours to fully charge the battery under ideal conditions (phone off) or anything from 3-6 hours with the phone on, depending all what's running or if you're using the phone while it's charging.
Which is all pretty ridiculous - ok we're comparing apples and oranges when we compare a S2 to the likesw of a Nokia, but I do miss the days when I could charge my phone in an hour and have it last two or three days. I thought my Blackberry was bad but at least I can usually squeeze a full day out of it...
The only wall wart I had lying around that was more than 700mA was a 5V 2A supply. I've tried with that which works, but the phone chokes with a "battery overtemp" warning after about 10 minutes - which tells me I AM pumping more into the battery than it can handle. This would suggest that there IS a happy medium where we can optimize the battery charge time - I'm bust looking for a 1A supply...
I have TWO AC-10Xs, and am using it with the Ninphetamene kernel (which comes with increased charge input mods to 800ma) fine. Charges to full in about 2.5-3 hours.
I've never gotten overcharge errors either.
Hi,the usage of more powerful charger will eventually reduce lifespan of your battery. This comes from basic physics, materials and so... Higher mA means faster current, which wear the material of the capacitor - battery.
I have capdase 2 USB car charger that was used for my old iphone device.
It outputs 1A.
is it safe to use it?
I tried to charge with it for 10-15minutes or so, and didnt recognize any suspicious warmups...it reached 41~degrees while at the moment im charging and using it as a hotspot and its on 38 degrees.
DobermanS said:
Hi,the usage of more powerful charger will eventually reduce lifespan of your battery. This comes from basic physics, materials and so... Higher mA means faster current, which wear the material of the capacitor - battery.
Click to expand...
Click to collapse
The phone (specifically, the kernel) limits charge coming in, and there MUST be hardware limiters on the batteries and the phone themselves (which, in some cheapo batteries DON'T WORK and results in them frying themselves and the phone in process) and the batteries are replaceable anyway.
eranyanay said:
I have capdase 2 USB car charger that was used for my old iphone device.
It outputs 1A.
is it safe to use it?
I tried to charge with it for 10-15minutes or so, and didnt recognize any suspicious warmups...it reached 41~degrees while at the moment im charging and using it as a hotspot and its on 38 degrees.
Click to expand...
Click to collapse
i use htc wall charger rated at 1A and having no proplem with ,a pc USB port is capable of 1A and we all know there are no problem ,even so there are no visible improvement in charging time because as someone said the charging current is automatically regulated
ledavi said:
i use htc wall charger rated at 1A and having no proplem with ,a pc USB port is capable of 1A and we all know there are no problem ,even so there are no visible improvement in charging time because as someone said the charging current is automatically regulated
Click to expand...
Click to collapse
That's good to know that the current is regulated by the device.
Is there a software to see what is the current taken by the phone?
As long ad the temperture isn't higher than 45degrees is it ok?
By the way, Im pretty sure that usb outputs 0.5A and not 1A
Sent from my GT-I9100 using XDA Premium App
battery monitor widget
It seems logical to be able to use all chargers as smartphones all have micro usb .
(I 'm not sute that's mean something in english, sorry)
Great widget! thanks.
I really like the data it gives!
Sadly, while charging with my .7A original charger & meanwhile giving a hotspot to my laptop, it shows that only 76mA comes in!
hehe, gonna take forever to charge the battery this way.
i doubt this. i'm still worried about the compatible problem~~~
After two days with the battery monitor widget Im affraid itself it drains the battery.
could it be it affects the battery?
settings are regular, it monitors changes every 60seconds
Let's see if I can help make things a bit clearer. Feel free to correct where I may be off.
The Nokia thing, it's not a charger. It's a power supply.
The "charger" is built into your phone, hardware-wise.
How can I prove it?
Take the Samsung supplied cable, plug it into your computer. You'll see that your phone is charging too. No, the cable is not a charger. Do you think your computer is a special built charger for your phone? Hardly.
The charging circuit is within the phone, and thus charging the battery when there's available power.
Ok, so we have the charger (i.e. the mobile phone), we have the battery, we need the power. Where do we get power from? The wall adapters (or computers). So what are the wall adapters? Ratings of 1000mah means that the wall adapter can provide up to 1000ma per hour.
However, your charging circuit will determine how much current to actually draw. For example, drawing 800mah for 10 min may raise the temperature to 55 degrees, so after 10 min the charging circuit drops the charging current to 500mah.
Of course, if you're using el cheapo cables, some cables may not be able to support the current draw and you may find that even with 20000000mah power supplies your phone can only draw 100mah.
The SGS2 heats up pretty easily, and it doesn't quite draw beyond 700mah. The circuit built into the phone doesn't allow it to, if i'm not wrong. If your phone is overheating while charging, you better change your case as it's going to cause your phone to overheat sooner or later.
Using a 20000000mah power supply isn't an issue, because the charging circuit within the phone will be able to draw only a certain amount.
Me, I plug my SGS2 into a 2Ah charger every night to charge, and yes it's perfectly fine. I'm only upset that after buying an expensive 2A charger, I realised that the phone is not able to draw high currents (phone even heats up to 55degree Celsius when charging).
Charging the phone on a ice pack (which lowered the phone temperature to 16 degrees while charging) didn't increase the amount of current drawn by the phone, even on a 2A power supply.
My humble advise is, stick with the stock power supply, or at most get a 1A version. No need to splash for a 2A power supply. If you really need faster charging, get a battery charging dock.
eranyanay said:
After two days with the battery monitor widget Im affraid itself it drains the battery.
could it be it affects the battery?
settings are regular, it monitors changes every 60seconds
Click to expand...
Click to collapse
yes of course it does. It consumes a certain amount of ma per hour, doesn't it?
Personally, there's a app called watchdog, look for it, IMHO it helps to catch rouge apps better, and manage battery better.
I thought the whole idea of having a universal micro USB charging connection across most good brands was so you could use other chargers!
moooxooom said:
yes of course it does. It consumes a certain amount of ma per hour, doesn't it?
Personally, there's a app called watchdog, look for it, IMHO it helps to catch rouge apps better, and manage battery better.
Click to expand...
Click to collapse
Well I just like the widget, which shows me also the battery temperture
I hope it doesnt takes too much
I see that the wall charger for the Galaxy Nexus outputs 5V and 1A. Unfortunately, none of the extra chargers I'd like to use as additional chargers have this output. Some of them are 5.1V, and some of them all put out under 1A.
From what I understand, using a charger w/ a higher voltage could potentially damage the phone. I know that this unlikely considering it's only an extra .1V in my case, but I don't want to risk it.
As for the amps, I believe that using lower amps isn't dangerous, but may result in charging taking longer than normal.
Are these two assumptions correct? Also, does anyone know of any cheap chargers that put out 5V/1A? If you put in "phone charger" in Amazon, the second hit is a Samsung OEM charger that puts out 5V/0.7A, but I'd rather get one that is going to be an exact match.
700-800mah are fine and acceptable for charging. But if wanting to play games on a charger and still get some kind of charge, go with a 1000 mah charger. 1000 mah charger is also best to use while using mhl so you can hopefully not lose battery charge while streaming video over hdmi.
Sent from my samsung gt i9250 which is in the wrong country.
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
http://www.amazon.com/Samsung-Micro-Travel-Charger-M540/dp/B002HJBM04
http://www.amazon.com/Samsung-Travel-Charger-Adapter-MicroUSB/dp/B0049IE70I
Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33
alee said:
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33
Click to expand...
Click to collapse
it's.. 24 bucks ... for a charger..
lol fml
Dmw017 said:
it's.. 24 bucks ... for a charger..
lol fml
Click to expand...
Click to collapse
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.
alee said:
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.
Click to expand...
Click to collapse
...you say it folds too huh :/ ....
but for that price, i wonder if there are any samsung chargers that are just as good if not better..
that is Apple, after all
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts
I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium
Dmw017 said:
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts
Click to expand...
Click to collapse
Same one.
Good question on whether it's putting out a full 1A. I guess what I do is check the charge times tomorrow with a few different 1A chargers to see if it measures up.
I use this for home:
http://www.amazon.com/Cellet-Charger-Retractable-Cable-myTouch/dp/B004XVM1T0
And this for the car:
http://www.amazon.com/Griffin-Powerjolt-Dual-Universal-Micro/dp/B0042B9U8Q
Both are dual-USB and put out 1amp. Charges my GNEX and iPhone 4 (work) at the same time without issues.
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I've read that the wall charger drops the battery down to 90ish % after it hits 100% and just goes between the two levels until you unplug your charger
While a USB charge is slower and charges your device up to a "fuller" charge
...I may be unfathomably wrong though
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
man that little Apple charger is so damn cute ... lol , ill probably end up buying it once the 1A volt charge is confirmed
edit: just bought it lol, oh well.. it will probably maybe more or less somewhat possibly work like it should at 1A :}
assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I'm not an expert on the subject but I was under the impression that cycles (charge + discharge) were a bigger factor on battery life than something like this. The longer a current is running through the battery (charge or discharge) is detrimental to it's life span.
Leaving a laptop plugged in all the time ruins its battery is my source on this one. I would say it's because it has a constant charge running through the battery.
qreffie said:
I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
That takes a lot longer vs plugging it into the wall
rashad1 said:
That takes a lot longer vs plugging it into the wall
Click to expand...
Click to collapse
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk
[hfm] said:
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
500mA is the max before the PC will disable the port. So your actually get less current.
There are some ports, depending on the motherboard that have a option of outputting more power for charging devices, and also have the port powered when the computer is off. But a normal usb 2.0 port is limited to 500mA max per spec... so a normal usb 2.0 port charging a phone is drawing less then 500mA, or it would get and over current condition and disable the port.
I design electronics and work with USB and batteries often, so let me clear some stuff up in no particular order:
- PC ports are limited to 500mA so will only ever output a max of 500mA
- You can use a wall charger that outputs 1000mA but on most devices the data pins on the micro USB need to be shorted to tell the phone it can try to draw more than 500mA. This is true for HTC devices for example. That means if you get a cheap charger that doesn't short the data pins, when you plug your standard micro-usb cable into it, it will still only charge your phone at 500mA.
- The charging controller is actually in the phone. It decides based on temperature (there's a sensor in the battery), current, voltage across the battery (current charge) and characteristics of the type of battery to figure out how much current to allow into the battery. Although its true that a 500mA charger may have different affects than 1000mA chargers, there usually is very little perceivable difference. Which is (slightly) better really depends on the charging controller and how it decides when to stop charging.
- When the battery is full, the phone continues to 'trickle charge' for a period of time. This isn't a bad thing. Overcharging a Lithium battery can be extremely dangerous, so normal charging occurs at a high speed and then slows down at a safe limit below the 'true' 100%. After that the phone continues to trickle charge to top up the battery. This is the reason you read in phone manuals you should charge the phone for 8 hours or overnight for its first charge.
- When charging at 500mA, the battery does not get as hot. This usually means you get closer to the true 100% before 'trickle charging' starts. With a 1000mA charge the battery heats up a lot more so charging may switch to trickle much sooner. Here's an example with made up figures.
Lets say you charge your battery with a 500mA charger, and it takes 2 hours. When the phone shows 100% it may actually be at 99%, and trickle charging. Leaving it for another 30 mins may take it to its full capacity.
Now, lets say you charge your battery with a 1000mA charger, and it takes 1 hour. When the phone shows 100% it may actually be at 98%, and trickle charging - It stopped sooner because the battery was hotter. Leaving it for another 30 mins may take it to full capacity.
Conclusion.. the 500mA charger took 2.5 hours, while the 1000mA charger took 1.5 hours. However if you unplugged both when the phone showed 100%, the 500mA charged battery may last longer, and so you think the 500mA somehow resulted in a more thorough charge!
At the end of the day, it doesn't matter which you use. the absolute charge cycles is what counts. Charge to 100%, then dont charge till its 0 for best battery care. Constantly plugging into a charger or dock all day on and off is bad. But having said that, your phone is there to be used, so a sensible balance of the two is the best bet.
Thank you so much for the detailed response, kam187. Would you recommend avoiding using a 5.1V charger, considering the phone came with a 5V charger?
Sent from my Galaxy Nexus using Tapatalk
I wouldn't use it. The 0.1v probably won't make any difference, but it may not be regulated. Chargers with these odd values sometimes don't have any regulator inside them. That could damage your phone as the voltage could shoot up and down as the current draw changes.
Just search amazon/ebay for any MicroUSB charger, and pick one from a reputable manufacturer like Motorola, HTC, Samsung etc. Since all phones now use MicroUSB, there's loads of these chargers around from previous phone models etc.
Here's just one I saw on amazon.com:
http://www.amazon.com/Samsung-Trave...E70I/ref=sr_1_3?ie=UTF8&qid=1322808220&sr=8-3
Until now, I be been using whatever cheap 1A car chargers I found on eBay. They show up as AC on the phone, and charge acceptably fast, definitely better than USB, but worse than the original AC charger.
With GPS usage (sygic, 3d acceleration, full backlight, GPS, speaker, and mild CPU usage) the battery actually drains while charging. Starting a 4 hour trip with 100% charge resulted in 40% of battery, even if it was charging on the whole duration of the trip.
So, this summer I'm going to do some bigger road trips. I need a car charger that gives enough power to charge while doing the GPS usage described above. I suppose I'm going to need a charger that gives close to actual 2A, not only in theory. Any suggestions?
kourampies said:
Until now, I be been using whatever cheap 1A car chargers I found on eBay. They show up as AC on the phone, and charge acceptably fast, definitely better than USB, but worse than the original AC charger.
With GPS usage (sygic, 3d acceleration, full backlight, GPS, speaker, and mild CPU usage) the battery actually drains while charging. Starting a 4 hour trip with 100% charge resulted in 40% of battery, even if it was charging on the whole duration of the trip.
So, this summer I'm going to do some bigger road trips. I need a car charger that gives enough power to charge while doing the GPS usage described above. I suppose I'm going to need a charger that gives close to actual 2A, not only in theory. Any suggestions?
Click to expand...
Click to collapse
that is due to the fact that your phone only requests 500mA from the car charger (while your phone uses more)
are you using a custom kernel?
I use ElementalX, which has the option to enable fastcharge, which boosts it to 900mA (enough to charge with everything on)
Zorkman said:
that is due to the fact that your phone only requests 500mA from the car charger (while your phone uses more)
are you using a custom kernel?
I use ElementalX, which has the option to enable fastcharge, which boosts it to 900mA (enough to charge with everything on)
Click to expand...
Click to collapse
Is there any downside to enabling fast charge. No sure if there isn't why every kernel doesn't enable it by default.
fitz420 said:
Is there any downside to enabling fast charge. No sure if there isn't why every kernel doesn't enable it by default.
Click to expand...
Click to collapse
Because in theory USB ports of e.g. laptops only give 500mA. I've used it on a lot of car chargers, USB hubs, desktops and laptops and never had any problem.
Even if something were to break, it will be your car charger, because your phone can handle a lot more than 900mA, and if your car charger is rated for 1A that will suffice.
Actually the N5 stock has Fast charging enabled. The problems usually are most commonly from poor USB cables and sometimes bad chargers that don't output what they say. If you are dropping battery charge that quickly from a 1A charger most likely you have a problem with one of the 2 I mentioned above. DL CurrentWidget from the play store. Set the Update Interval to 1 sec and then plug in the charger. IF it is a 1A charger you should get just under 1A maybe about 900mA or so. Since you are losing battery life while charging and using the above things you mentioned I would imagine that it is getting about 500mA or less.
Try the test with your OEM cable from the N5 since it is more likely to be better at handling the higher current charge rate. That way you can figure if it is the cable or the charger itself.
Here are ones that MmmmmBacon suggested in his Cheap Charger thread. I am probably going to grab one myself.
http://www.amazon.com/Portable-Dual...=1399909516&sr=8-1&keywords=anker+car+charger
http://www.amazon.com/Anker®-Dual-P...=1399909109&sr=8-2&keywords=anker+car+charger
I use this and it's brilliant and actually charges the battery while using navigation -
http://www.amazon.co.uk/gp/aw/d/B00...&pf_rd_t=101&pf_rd_p=436834887&pf_rd_i=468294
Sent from my Nexus 5 using Tapatalk
Ohgami_Ichiro said:
http://www.amazon.com/Anker®-Dual-P...=1399909109&sr=8-2&keywords=anker+car+charger
Click to expand...
Click to collapse
Highly recommend this. It can charge two N5s at full speed with no issue.
Sorry for the late reply... I didnt have time to even read the replies till now.
I never believed that a cable could make that much of a difference, but testing right now with the original LG AC charger and misc USB cables the difference is immence. Best performance I managed to get was from the included cable of my Anker powerbank. its around 980-1010mAh constantly, vs the 400-600 most cables do.
I will test in the car ASAP.
http://m.ebay.com/itm/301013129424
http://www.scosche.com/chargers/ipad-usb-car-charger-two-port
My combo for the most compact charging solution. Same speed as the stock charger.
http://www.amazon.com/Anker®-Du...er+car+charger
That is one of the best car chargers I've found, I use to charge my Nexus 5 when I'm on the go.
This Anker charger solved it.
It gives a steady 1000mA that is enough to charge and use GPS.
I have to give a huge thumbs up to Anker, because together with the car charger i also bought the Astroslim 3 6000mAh powerbank, which charges two devices the same time, at a steady 1500mA each!!! I loved bothe the car charger and the powerbank, definitely worth their money.
I ordered the 4gb ram version of Zenfone 2 and it only comes with the "Boostmaster" quick charger that outputs 9v and 2A.
Also, I saw pictures where the visible part of the battery in the phone says "+9v 2A" on it.
I want to know is it safe to use a regular 5v USB charger to charge this phone if I do not want to use the quick charger?
I am not sure since I read through some websites and I am concerned about these quotes:
Too low voltage may do damage. Slightly too low may work AOK or at
reduced current. Too low may damage equipment but not usually. Too low
may damage charger but not usually.
Click to expand...
Click to collapse
If the voltage is too low, you'll get either nothing, or odd / failure
behavior when the power draw on the system gets high.
Click to expand...
Click to collapse
I'd be more worried about the undervoltage. It may put a strain on the
voltage regulator in your laptop and may also put a strain on your
battery
Click to expand...
Click to collapse
So I want to know does the zenfone 2 has a special battery that allows lower voltage? Is its battery really a 9v battery?
I use a 5V charger, but the 2GB Zen has a 5.2V charger. There's nothing wrong with using weaker plugs, though the charge time is roughly 3-4hrs with the one I use.
"I'd Totally Hug You, If That Was Something I Did"
I took the back off and the battery the, it says 5.2 v and 9v on it for input so I guess you can use either one on it
oh, I didn't know it says that on battery, I didn't receive my phone yet, but all the pictures I 've seen on reviews and when I googled the image, all I see on the battery is "Input +9v 2A, 18W"
does the US version have the extra 5.2v printed on the battery?
VietnamTom said:
oh, I didn't know it says that on battery, I didn't receive my phone yet, but all the pictures I 've seen on reviews and when I googled the image, all I see on the battery is "Input +9v 2A, 18W"
does the US version have the extra 5.2v printed on the battery?
Click to expand...
Click to collapse
Yes. My 4GB model has both on it.
I've used a non QC charger on it and it worked fine. I mainly have QC's now so I use those when my phone doesn't have qi support. It chargers fine with the following Quick Charge 2.0 chargers: Aukey 10000mah battery pack, Asus boost master, Motorola Turbo, Incipio car charger, Power Partners 30w. I haven't had any issues charging it yet but it does get warm (battery hits 119 °F) using the Asus charger and cable.
Ive used multiple charging blocks that have 1 Amp and each time the charging stops at 77% and stays there overnight. This is kind of dumb I think. Anyone else having this issue when not using the stock charging block? Hmm it actually seems that this is happening on my cords that are 6 feet in length. The short cords are working fine
downshift00 said:
Ive used multiple charging blocks that have 1 Amp and each time the charging stops at 77% and stays there overnight. This is kind of dumb I think. Anyone else having this issue when not using the stock charging block? Hmm it actually seems that this is happening on my cords that are 6 feet in length. The short cords are working fine
Click to expand...
Click to collapse
Had issues with long cords before, mostly they would take ages to charge.
I'm using the stock Samsung Note 3/4 charger with no issue and the samsung cable.
It's easier to use than to unpack and find an Aussie adaptor for the ASUS charger....
Please see the following ASUS support page: "Introduction to quick charge"
http://www.asus.com/us/support/Sear...5-480F-AADA-FE49EDD81C01/?keyword=boostmaster
Sincerely,
ASUS_USA
VietnamTom said:
I ordered the 4gb ram version of Zenfone 2 and it only comes with the "Boostmaster" quick charger that outputs 9v and 2A.
Also, I saw pictures where the visible part of the battery in the phone says "+9v 2A" on it.
I want to know is it safe to use a regular 5v USB charger to charge this phone if I do not want to use the quick charger?
I am not sure since I read through some websites and I am concerned about these quotes:
So I want to know does the zenfone 2 has a special battery that allows lower voltage? Is its battery really a 9v battery?
Click to expand...
Click to collapse
I've charged on other charger when I grabbed the wrong one, but it won't do a full charge. I can only get about 75% on standard charger. Plug in the fast charger and it charges right up.
it should be fairly okay else it wouldn't be safe to plug this device into sa normal USB port (5v)