hi,
a while ago i installed cyanogenmod 9 and the kernel for it. But i wanted to revert it to stock. so I restored the NAND backup. Unfortunately the backup didn't boot. So i download a RUU for it. Today wanted to flash the RUU and on the PC it gives the error '155: (unknown)' and on the mobile it says 'Older HBOOT version".
now i think i used the wrong RUU, which one do i need?
p.s. Additional info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.18.0000
(bootloader) version-baseband: 3831.19.00.120
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: #
(bootloader) imei: #
(bootloader) product: primou
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PK7610000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 3811mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 8591a55c
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
I used the following RUU:
RUU_PRIMO_U_ICS_40A_HTC_Europe_1.56.401.2_Radio_20.66.30.0831U_3831.15.00.19_M_release_254696_signed
RUU_PRIMO_U_ICS_40A_HTC_Europe_2.22.401.1_Radio_20 .76.30.0835U_3831.19.00.120_release_273801_signed. exe
http://forum.xda-developers.com/showpost.php?p=30409611&postcount=111
ckpv5 said:
RUU_PRIMO_U_ICS_40A_HTC_Europe_2.22.401.1_Radio_20 .76.30.0835U_3831.19.00.120_release_273801_signed. exe
http://forum.xda-developers.com/showpost.php?p=30409611&postcount=111
Click to expand...
Click to collapse
thanx!. may i ask how you get that with the info u just gave you? (p.s. i am downloading it right now )
0ground0 said:
thanx!. may i ask how you get that with the info u just gave you? (p.s. i am downloading it right now )
Click to expand...
Click to collapse
modelid: PK7610000
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__203
cidnum: HTC__102
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__A07
cidnum: HTC__A48
cidnum: HTC__304
cidnum: HTC__M27
cidnum: HTC__032
cidnum: HTC__016
mainver: 2.22.401.1
hbootpreupdate:13
DelCache:1
DelFat:1
ok, but the first RUU i used was also for HTC_E11 (cid), and that gave me the HBOOT OLD version or something
(bootloader) version-bootloader: 1.18.0000 - 2.22.401.1
1.56.401.2 - 1.16.0000
but it worked thanx
Hi,i have same problem..i get mobile for tmobile cz..cidnum tmob004..i want to this ruu.or how to change cid or where download right ruu
Sent from my One V using xda app-developers app
I have this baseband
Sent from my One V using xda app-developers app
First let me say thank you for your time and help while also explaining my situation. I am a newly android convert and got in over my head trying to convert my M8 to the google play edition. I followed this guide here running through the steps of unlocking my bootloader, installing SU, TWRP which led me to the step of S-OFF. This guide had me flash the insertcoin rom which I did successfully but then when trying to obtain S-OFF with firewater I realized my HBOOT version was too high. I counted my losses but later the same day, this first day my phone arrived one of my pixels died. So now all I want is to return to stock and obtain the relock status at least to return my phone. Sadly out of my ignorance I didn't make a nandroid backup of my original before flashing insertcoin though. I've looked everywhere and am lost but fond this site with stock nandroid backups but can't seem to find the one for my device since my CID isn't there and also when I run the command to find my Main-version it returns blank, no MID. Below I will include information that may be relevant to aiding me. Thank you again for your time and let me say that this mistake has made me learn a valuable lesson, read everything before flashing >.<!
Android version: 4.4.3
HTC Sense version: 6.0
InsertCoin version: 4.0.5
HTC SDK API Level: 6.25
Tampered
Unlocked
HBOOT-3.16.0.0000
C:\Windows\system32>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: VODAPE17
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Kernel version 3.4.0-ge224610
[email protected]#1
SMP PREEMPT
Build number
2.22.401.4
Horrible.Naruko59 said:
First let me say thank you for your time and help while also explaining my situation. I am a newly android convert and got in over my head trying to convert my M8 to the google play edition. I followed this guide here running through the steps of unlocking my bootloader, installing SU, TWRP which led me to the step of S-OFF. This guide had me flash the insertcoin rom which I did successfully but then when trying to obtain S-OFF with firewater I realized my HBOOT version was too high. I counted my losses but later the same day, this first day my phone arrived one of my pixels died. So now all I want is to return to stock and obtain the relock status at least to return my phone. Sadly out of my ignorance I didn't make a nandroid backup of my original before flashing insertcoin though. I've looked everywhere and am lost but fond this site with stock nandroid backups but can't seem to find the one for my device since my CID isn't there and also when I run the command to find my Main-version it returns blank, no MID. Below I will include information that may be relevant to aiding me. Thank you again for your time and let me say that this mistake has made me learn a valuable lesson, read everything before flashing >.<!
Android version: 4.4.3
HTC Sense version: 6.0
InsertCoin version: 4.0.5
HTC SDK API Level: 6.25
Tampered
Unlocked
HBOOT-3.16.0.0000
C:\Windows\system32>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: VODAPE17
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Kernel version 3.4.0-ge224610
[email protected]#1
SMP PREEMPT
Build number
2.22.401.4
Click to expand...
Click to collapse
It must be the same as VODAP001 so x.xx.161.x
I would suggest to take a nandroid of your current setup and flash the stock 1.54.161.10 rom and stock firmware and relock bootloader.
I believe you will be ok but in case of any problems you have your nandroid to revert.
stathis95194 said:
It must be the same as VODAP001 so x.xx.161.x
I would suggest to take a nandroid of your current setup and flash the stock 1.54.161.10 rom and stock firmware and relock bootloader.
I believe you will be ok but in case of any problems you have your nandroid to revert.
Click to expand...
Click to collapse
Thanks so much for the input, I will give it a shot. Before I do though mine is 2.22.401.4 so x.x.401.x. Is that compatible with the x.x.161.x? I'm unsure how it works. Also are you sure flashing another version won't brick or harm my handset? I have a nandroid backup so as long as it won't brick it and I can restore my nandroid backup I'll try it. Again, I appreciate the help and wish you the best!
Horrible.Naruko59 said:
Thanks so much for the input, I will give it a shot. Before I do though mine is 2.22.401.4 so x.x.401.x. Is that compatible with the x.x.161.x? I'm unsure how it works. Again, I appreciate the help!
Click to expand...
Click to collapse
2.22.401.4 is what InsertCoin rom is based on.
From your getvar output we see that your CID is (bootloader) cidnum: VODAPE17 so if you want to return to a stock rom you need a VODAPE17 rom which is x.xx.161.x
stathis95194 said:
2.22.401.4 is what InsertCoin rom is based on.
From your getvar output we see that your CID is (bootloader) cidnum: VODAPE17 so if you want to return to a stock rom you need a VODAPE17 rom which is x.xx.161.x
Click to expand...
Click to collapse
As your first post said I tried flashing the VODA001 nandroid backup. I just kept receiving a failed to flash error. Is this normal when flashing a different CID? I don't necessarily want to have it just the way it came just enough to where it isn't custom firmware and re-locked. Sadly I cannot find a backup Nandroid with the CID VODAP17 so I don't have many options. Is there anything you would consider? Is there possible a different CID I could flash? Also how did you figure out I needed one with x.x.161.x, I don't see that in the getvar? Again, I appreciate your help and time you used to provide it. Thanks!
Vodafone variants like:
cidnum: VODAP001
cidnum: VODAP102
cidnum: VODAPE17
cidnum: VODAP405
cidnum: VODAP304
cidnum: VODAPD18
cidnum: VODAP120
cidnum: VODAP110
are x.xx.161.x that's why i suggested to flash a VODAP001 stock rom since i couldn't find a stock rom for VODAPE17 which clearly failed
Unfortunately i don't have any other solution for you.
stathis95194 said:
Vodafone variants like:
cidnum: VODAP001
cidnum: VODAP102
cidnum: VODAPE17
cidnum: VODAP405
cidnum: VODAP304
cidnum: VODAPD18
cidnum: VODAP120
cidnum: VODAP110
are x.xx.161.x that's why i suggested to flash a VODAP001 stock rom since i couldn't find a stock rom for VODAPE17 which clearly failed
Unfortunately i don't have any other solution for you.
Click to expand...
Click to collapse
I ended up attempting to restore from the VODAP001 again and for some reason it worked this time. Restored the recovery and re-locked the device. Sadly I couldn't remove the **Tampered** flag since I'm not S-OFF but I returned it anyways. Seems like everything was fine and I should be receiving a replacement in a few days. Thank you so much for your continued help and for not giving up on my cause. I really appreciate your time and effort, you are the type of person that makes this community so great. Thanks again!
Dear all,
Because i wiped all my partitions i'm trying to use the RUU to install android again on my HTC One m8.
With the official RUU.exe I cant install it, it says wrong model ID, so i decide to download a zip file, in all the zip files the MID and CID are exactly the same as my HTC, but i dont know how to use them. If i use adb sideload, it gives me the error "Failed to write data 'protocol fault <no status>' *ed.zip* at 59%.
I'm trying to fix my phone about 6 full days, but no solution.
Please help me!
Thank you in advanced.
thommylue said:
Dear all,
Because i wiped all my partitions i'm trying to use the RUU to install android again on my HTC One m8.
With the official RUU.exe I cant install it, it says wrong model ID, so i decide to download a zip file, in all the zip files the MID and CID are exactly the same as my HTC, but i dont know how to use them. If i use adb sideload, it gives me the error "Failed to write data 'protocol fault <no status>' *ed.zip* at 59%.
I'm trying to fix my phone about 6 full days, but no solution.
Please help me!
Thank you in advanced.
Click to expand...
Click to collapse
Are you S-Off. If those RUUs aren't signed, you won't be able to flash them.
Anyway, since your PC and phone are still working together, get into fastboot and enter the command fastboot getvar all and post the readout here. Make sure to delete your serial # and IMEI. Never post those on a public forum for your own security.
xunholyx said:
Are you S-Off. If those RUUs aren't signed, you won't be able to flash them.
Anyway, since your PC and phone are still working together, get into fastboot and enter the command fastboot getvar all and post the readout here. Make sure to delete your serial # and IMEI. Never post those on a public forum for your own security.
Click to expand...
Click to collapse
First of all, thank you for your response!
No, I'm S-On, isn't there a reason for this security?
I think i can't get my phone to S-off because I don't have a ROM installed...
My phone details are:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 098a72e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
The RUU.exe's I used, are signed.
I cant see what my MID supposed to be because it are EXE files and i can't change them...
You just need to use this RUU
https://www.hightail.com/download/UlRSMFhxV3IwZ25MbjhUQw
Make sure your bootloader is relocked, run the RUU and connect the phone when in bootloader and follow the instructions
FIXED!!
Thank you guys very much, both of you!!
That RUU works for me, how did you know that?
So people with the same issue as me, this RUU works!
thommylue said:
Thank you guys very much, both of you!!
That RUU works for me, how did you know that?
So people with the same issue as me, this RUU works!
Click to expand...
Click to collapse
How do we know ? That's why we asked for fastboot getvar all to get to know your device better
thommylue said:
Thank you guys very much, both of you!!
That RUU works for me, how did you know that?
So people with the same issue as me, this RUU works!
Click to expand...
Click to collapse
Cause the RUU I gave covers your CID (HTC__E11) and MID (0P6B10000)
EddyOS said:
Cause the RUU I gave covers your CID (HTC__E11) and MID (0P6B10000)
Click to expand...
Click to collapse
Yes, but, where can you see it in the RUU file?
I keep this file in my "Holy stuff" folder.
I'm very happy right now!
Spending days to fix this, but i learned very much of it.
Thank you!
Well, your device is the unbranded EU model (same as mine) so that's that and the CIDs that RUU covers are:
modelid: 0P6B10000
cidnum: HTC__001
cidnum: HTC__102
cidnum: HTC__203
cidnum: HTC__E11
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__304
cidnum: HTC__A07
cidnum: HTC__032
cidnum: HTC__J15
cidnum: HTC__016
cidnum: HTC__M27
cidnum: HTC__K18
cidnum: HTC__A48
cidnum: HTC__002
Hi, I've looked around the forum a bit wondering how to update to Marshmallow, but it's just been giving me a huge headache. I don't want to play around with any more files and backups etc. until I know exactly what I'm doing. Could somebody please kindly explain to me how to do the update?
Here is my getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.13
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f063fb42
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks in advance for any help guys.
The easiest way is to flash the ROM version of MM. No other edits needed. If you want to convert fully to MM you can change the CID and MID to the dev edition. Then flash the firmware and the RUU.
Those are some options.
---------- Post added at 12:44 PM ---------- Previous post was at 12:41 PM ----------
This is a good as stock flashable version of MM dev edition
http://forum.xda-developers.com/showthread.php?t=3262894
How do I change the MID?
moofiee said:
Hi, I've looked around the forum a bit wondering how to update to Marshmallow, but it's just been giving me a huge headache. I don't want to play around with any more files and backups etc. until I know exactly what I'm doing. Could somebody please kindly explain to me how to do the update?
(bootloader) version-main: 4.16.401.13
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
Thanks in advance for any help guys.
Click to expand...
Click to collapse
There is no Marshmallow update for your device version yet.
So save the headache ..
ckpv5 said:
There is no Marshmallow update for your device version yet.
So save the headache ..
Click to expand...
Click to collapse
Indeed ! The easiest way in the first place is to wait (if you are 100% stock) for the official update
Perhaps I should have listened... I changed the CID and MID to the developer edition and then flashed the marshmallow firmware, but now I'm stuck in RUU mode and can't seem to get out of it
These are the steps to RUU with Marshmallow on Developer Ed.
Check whether you skipped any steps
(of course after CID/MID is correctly changed to Developer Ed. is a must)
1. Download the 6.12.1540.4 firmware - https://drive.google.com/file/d/0B4jGj3SfskzMbzBtd1R1VHlmbVU/view?usp=sharing
2. Download the 6.12.1540.4 RUU if you still don't have it - http://www.htc.com/us/support/htc-one-m8/news/
3. place the firmware.zip that you downloaded in your fastboot folder then open command prompt from your fastboot folder
4. Put your device to bootloader/fastboot mode
Run below commands:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
You'll see -
if failed : FAILED (remote: 90 hboot pre-update! please flush image again immediately)
repeat fastboot flash zip firmware.zip
fastboot reboot-bootloader
5. Run 6.14.1540.4 RUU
6. Done
Hallo,
I have a HTC One M8 (bootloader unlocked, twrp recovery, rooted, S-On, android ver 6.0, HTC sence ver 7). Unfortunately, it stops from almost a week recognizing my Sim-Card.
When I check the Baseband and IMEI numbers under "Phone Identity", it says "Unknown".
But, If I reboot into Fastboot, and use the command: "fastboot getvar all", it shows that I have an imei number. ?!!
My question, what is wrong with the device. How I can fix the IMEI number. Do I need to get S-Off, and if yes, how i can do that.
Thanks.
have you tried to flash RUU if it's available for your device variant ?
if you didn't then post the result of fastboot getvar all ( after removing serialno and imei )
ahmed.ismael said:
have you tried to flash RUU if it's available for your device variant ?
if you didn't then post the result of fastboot getvar all ( after removing serialno and imei )
Click to expand...
Click to collapse
I could not find any RUU.exe for my device. But I flashed HTC_M8_twrp_DE_ota_6.12.401.4 through TWRP recovery, which did not solve the problem. I still have Baseband and IMEI as unknown.
The result of "getvar all" is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
moh19814 said:
I could not find any RUU.exe for my device. But I flashed HTC_M8_twrp_DE_ota_6.12.401.4 through TWRP recovery, which did not solve the problem. I still have Baseband and IMEI as unknown.
The result of "getvar all" is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
follow this post instruction ( all of it and don't miss a step )
https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
this will help if your problem is software related
if it doesn't then most defiantly it's hardware related ( let's hope it's a software )
BTW you don't need s-off
moh19814 said:
I could not find any RUU.exe for my device. But I flashed HTC_M8_twrp_DE_ota_6.12.401.4 through TWRP recovery, which did not solve the problem. I still have Baseband and IMEI as unknown.
Click to expand...
Click to collapse
There is no reason to think that a TWRP backup would fix this. TWRP backup is just he ROM (system) partition and doesn't include radio or other firmware partitions.
RUU is what you need, as it will re-image the device with all factory partitions, including radio baseband, and other firmware.
Hi there,
I have the exact same problem with my htc one m8. My "fasboot getvar all" is identical with the one posted here, only these are different:
version-main: 6.12.111.4
cidnum: T-MOB101
......everything else is completely the same.
Hope someone can help me. I was unable to find RUU for this version. Thanks in advance!
melves said:
version-main: 6.12.111.4
cidnum: T-MOB101
......everything else is completely the same.
Click to expand...
Click to collapse
Are you sure? Because it would be really unusual to have a different CID and main version, but the same radio baseband number. I suspect the baseband number is actually different.
Do yourself (and us) a favor and just post all the getvar data (this time, and when asking for help in the future). It's easy to copy and paste; and probably much easier/faster than trying to explain what is different, and what is not - plus remove all doubt like the one above. If you don't know how to copy and paste in control prompt, right mouse click on the window, select "Mark" then highlight what you want to copy, then press Ctrl+C. Then in a post, just right mouse click and select "Paste".
As always, remove IMEI and serial number before posting.
redpoint73 said:
Are you sure? Because it would be really unusual to have a different CID and main version, but the same radio baseband number. I suspect the baseband number is actually different.
Do yourself (and us) a favor and just post all the getvar data (this time, and when asking for help in the future). It's easy to copy and paste; and probably much easier/faster than trying to explain what is different, and what is not - plus remove all doubt like the one above. If you don't know how to copy and paste in control prompt, right mouse click on the window, select "Mark" then highlight what you want to copy, then press Ctrl+C. Then in a post, just right mouse click and select "Paste".
As always, remove IMEI and serial number before posting.
Click to expand...
Click to collapse
Thanks for the respond redpoint73,
I'm sorry about that, you're right that posting all the data is the best thing to do if I want to get help. Well, there it is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.111.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
This M8 of mine is bought from german operator named "Telekom" and it hasn't been network locked. I've unlocked the bootloader and installed TWRP for the only reason that my original software crashed and I wasn't able to find official one for that model. I've found however a nandroid backup for my version and restored it through TWRP and all went fine for a month until my sim suddenly stopped being recognized (few different sims from friends of mine also were tested with the same result). *#06# gives me blank space, but on "fastboot getvar all" IMEI comes up. If any more info needed please tell.
redpoint73 said:
Are you sure? Because it would be really unusual to have a different CID and main version, but the same radio baseband number. I suspect the baseband number is actually different.
Click to expand...
Click to collapse
Radio baseband mostly same for most M8 except the radio config data is different for each CID
---------- Post added at 06:03 AM ---------- Previous post was at 06:01 AM ----------
melves said:
Hi there,
I have the exact same problem with my htc one m8. My "fasboot getvar all" is identical with the one posted here, only these are different:
version-main: 6.12.111.4
cidnum: T-MOB101
......everything else is completely the same.
Hope someone can help me. I was unable to find RUU for this version. Thanks in advance!
Click to expand...
Click to collapse
You can try flashing the htc signed firmware for 6.12.111.4
Most of the time this will fix the problem.
You can get the firmware in my backup thread linked in my signature on post #5
ckpv5 said:
You can try flashing the htc signed firmware for 6.12.111.4
Most of the time this will fix the problem.
You can get the firmware in my backup thread linked in my signature on post #5
Click to expand...
Click to collapse
Thank you very very much, it worked like a charm. After flashing the firmware from your post my sim is recognized again.
I'm glad there are people like you, thanks again!
version-bootloader: 3.19.0.0000
version-baseband: 1.29.21331147A1.14G
version-cpld: None
version-microp: None
version-main: 4.34.401.1
version-misc: PVT SHIP S-ON
serialno: HT537WM02945
imei: 358705060111558
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B67000
cidnum: HTC__J15
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 260ae94e
hbootpreupdate: 11
moka77 said:
version-main: 4.34.401.1
product: m8_ul
modelid: 0P6B67000
cidnum: HTC__J15
Click to expand...
Click to collapse
So what it the problem? The subject of the post is "no baseband, IMEI unknown" which is clearly not the problem in your case.
You also need to give some background. Was the phone modified in any way? The main version (4.34.401.1) looks weird, as it isn't expected to go with your product ID (m8_ul), MID, CID, etc.
redpoint73 said:
So what it the problem? The subject of the post is "no baseband, IMEI unknown" which is clearly not the problem in your case.
You also need to give some background. Was the phone modified in any way? The main version (4.34.401.1) looks weird, as it isn't expected to go with your product ID (m8_ul), MID, CID, etc.
Click to expand...
Click to collapse
my htc decrypt storage
---------- Post added at 08:26 AM ---------- Previous post was at 08:23 AM ----------
redpoint73 said:
So what it the problem? The subject of the post is "no baseband, IMEI unknown" which is clearly not the problem in your case.
You also need to give some background. Was the phone modified in any way? The main version (4.34.401.1) looks weird, as it isn't expected to go with your product ID (m8_ul), MID, CID, etc.
Click to expand...
Click to collapse
i need Help Me For Flash HTC M8
MODEL: M8_UL
IMEI: 35870
PLATFORM: hTCBmsm8974
CID: HTC__J15
MID: 0P6B67000
BOOT LOADER: 3.19.0.0000 / 260ae94e
VERSION: 0.5
FIRMWARE: 4.34.401.1 / 1.29.21331147A1.14G / PVT SHIP S-ON
SECURITY FLAG: ON
---------- Post added at 08:33 AM ---------- Previous post was at 08:26 AM ----------
moka77 said:
version-bootloader: 3.19.0.0000
version-baseband: 1.29.21331147A1.14G
version-cpld: None
version-microp: None
version-main: 4.34.401.1
version-misc: PVT SHIP S-ON
serialno: HT537WM02945
imei: 358705060111558
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B67000
cidnum: HTC__J15
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 260ae94e
hbootpreupdate: 11
Click to expand...
Click to collapse
i need Help Me For Flash HTC M8
MODEL: M8_UL
IMEI: 35870
PLATFORM: hTCBmsm8974
CID: HTC__J15
MID: 0P6B67000
BOOT LOADER: 3.19.0.0000 / 260ae94e
VERSION: 0.5
FIRMWARE: 4.34.401.1 / 1.29.21331147A1.14G / PVT SHIP S-ON
SECURITY FLAG: ON
moka77 said:
i need Help Me For Flash HTC M8
Click to expand...
Click to collapse
Flash what? You want the stock ROM or RUU? Or you want to flash a custom ROM?
I'm guessing that English is maybe not your native language? Regardless, you are going to need to try harder to explain what you want; and what your problem is. It seems completely unrelated to the thread topic, so it's very confusing trying to figure out what your issue is, and what you are trying to do.
We also need to understand what you have tried to do to the phone so far. Please describe, step by step, in as much detail as possible, with specific file names, sources you used, etc.
You've basically only posted 2 sentences, along with cut and paste some phone info. And while the phone info is useful to see the current state of the device, the 2 sentences you wrote, don't do much to tell us what is going on, and what you are trying to do.
---------- Post added at 09:02 AM ---------- Previous post was at 08:59 AM ----------
moka77 said:
version-bootloader: 3.19.0.0000
version-baseband: 1.29.21331147A1.14G
version-main: 4.34.401.1
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B67000
cidnum: HTC__J15
Click to expand...
Click to collapse
@ckpv5, if you have a chance, can you please take a look at this? I don't recognize that firmware number as being associated with the CID/MID. But I know you have a much better handle on the firmware numbers, CIDs, etc. So it may be some variant I'm not remembering.
redpoint73 said:
@ckpv5, if you have a chance, can you please take a look at this? I don't recognize that firmware number as being associated with the CID/MID. But I know you have a much better handle on the firmware numbers, CIDs, etc. So it may be some variant I'm not remembering.
Click to expand...
Click to collapse
That firmware indicates the device is M8_UHL for Middle East which run on 2.5Ghz as the Asia version. Normal EU is 2.3Ghz.
He needs the lollipop which I don't have in my backup thread. Only have 6.21.401.1 - backup, stock recovery & stock firmware.
We don't know if the device LOCKED or UNLOCKED. If unlocked then can try to restore 6.21.401.1 backup then flash the firmware. As his problem is "htc decrypt storage" I'm afraid it is emmc problem. If it is unlocked, then can format data (not wipe) in twrp to fix it.
Edit : Guess he's a lucky guy. There is RUU available for free
@moka77
Download 0P6BIMG_M8_UHL_L50_SENSE60_MR_HTC_Europe_4.34.401.1_Radio_1.29.21331147A1.14G_20.75.4196.01_F__signed.zip
https://easy-firmware.com/index.php?a=browse&b=category&id=1159
ckpv5 said:
That firmware indicates the device is M8_UHL for Middle East which run on 2.5Ghz as the Asia version. Normal EU is 2.3Ghz.
Click to expand...
Click to collapse
I figured that might be the case (one of the less common versions, like Middle East) but can never remember that firmware number. CID can apparently have 2 MIDs (0P6B10000 and 0P6B67000), so that threw me off, as well.
Why wouldn't the product ID say m8_uhl in getvar?
Thanks for replying and helping out, as always!
redpoint73 said:
I figured that might be the case (one of the less common versions, like Middle East) but can never remember that firmware number. CID can apparently have 2 MIDs (0P6B10000 and 0P6B67000), so that threw me off, as well.
Why wouldn't the product ID say m8_uhl in getvar?
Thanks for replying and helping out, as always!
Click to expand...
Click to collapse
0P6B67000 has only 2 CID HTC__001 & HTC__J15
No idea why ... some M8_UHL devices are HKG, India, Australia & Some China version but getvar show only M8_UL
Just for info :
M8_UL - WCDMA / GSM / FDD-LTE
M8_UHL - GSM / WCDMA / FDD-LTE / TDD-LTE
ckpv5 said:
0P6B67000 has only 2 CID HTC__001 & HTC__J15
Click to expand...
Click to collapse
Yeah, I see that from your TWRP backup thread (which I reference frequently). What confused me is that CID HTC__J15 can be MID 0P6B10000 or 0P6B67000.
Thanks again for clarifying.
Hi @redpoint73 @ckpv5 i have the same problem like few members above but might be a little different, my device stop detecting sim and other systems started to crash and stop working, It all started after i did the offical OTA software update for 6.0 but it dident install properly with giving the error at the end and reverted back to the old version.
I have unlocked the device to install a custom rom andriod 6.0 to fix this problem but it mad e it worse the rom booted but sim is still not recoginzed and nor the wifi is working that i think is due to the firmware being old.
After reading and serching i found your thread and this represented all the problems that i was facing so i fallowed your thread. i relocked my bootloader and tried to install the RUU 6.0 that you provided to the but that also failed saying varifing few ( version/ serial i do not remember didn't take a screenshot ) failed.
now i have thought of installing the RUU from the other meathord you mentioned in the end of that thread using the AruwizardMM.zip.
do i have to re unlock the bootloader or should i keep the bootloader Relocked status.
Version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.25.214500021.06G
version-cpld: None
version-microp:None
version-main: 4.16.401.13
version-misc: PVT Ship S-ON
serialno: **************
imei:**********2805
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsmo8974
modelid: 0P6B10000
cidnum: HTC_001
battery-status: good
battery-voltage: 0mV
partition-layoutL Generic
security: on
build-mode: SHIP
boot-mode:FASTBOOT
commitno-bootloader: f063fb42
hbootpreupdate: 11
gencheckpt: 0
ViperRJB said:
After reading and serching i found your thread and this represented all the problems that i was facing so i fallowed your thread. i relocked my bootloader and tried to install the RUU 6.0 that you provided to the but that also failed saying varifing few ( version/ serial i do not remember didn't take a screenshot ) failed.
Click to expand...
Click to collapse
Which RUU? Two different RUU have been provided in this thread. You should reference the version number, file name, or post you got it from; otherwise we have no idea which RUU file you tried.
You want the one linked in Post#4: https://forum.xda-developers.com/showpost.php?p=70838762&postcount=4
If you tried the RUU from Post #15, it won't work for your. It's intended for the Middle Eastern version, and since your CID and MID do not match what the RUU is looking for, it will fail (as intended by HTC).
RUU will fail for wrong version. It doesn't check the serial number, and will not fail from that. On that point, you should delete your serial number from your post. It isn't needed to solve your issue, and it is personal info, which should not be posted online.
ViperRJB said:
do i have to re unlock the bootloader or should i keep the bootloader Relocked status.
Click to expand...
Click to collapse
You do not unlock the bootloader to flash RUU. In fact, an unlocked bootloader will cause RUU to fail (not flash). RUU requires a locked or relocked bootloader when s-on.