Develop Bugs

[HELP] - Soft Bricked G3 D852 (Rogers) - No Download Mode. Stuck at FW Update Screen

Hello all,
I've done a lot of googling and searching on these forums and I'm having no luck. Hopefully by asking I can get some headway.
I was attempting to restore to stock rom. At 17% of the process using LGFlashTool 1.8.6 the tool gave me an error 'Unable to Communicate with phone' after about 10 minutes of no progress. I exited the LGFlashTool program and ran it again and now it fails saying 'Cant' change to download mode". If I turn the phone off and then press Vol+ and plug in my cable it just goes to the Firmware Update screen. My phone *IS* detected properly in the device manager as LGE Andriod MTP Device and under ports as LGE Mobile USB Serial Port (COM41). If I go into recovery (Vol- and power) it asks if I want to do the restore - but it doesn't actually do anything once I say yes twice. Just sits at the firmware update screen at 0%.
I looked at this post (http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091) but it appears to be either for a different phone or different problem (showing in device manager as a bulk device - mine is not doing that). Frankly I don't want to make things worse (if that's possible)
Does anyone have a way that I can restore the download mode for this D852 phone? I'm hoping if I can get download mode to work again I can reflash the stock rom. I don't care about the data on the phone at this point.
I'm willing to send some $$$ via paypal to whomever can get me back up and running! Thanks

Valgore said:
Hello all,
I've done a lot of googling and searching on these forums and I'm having no luck. Hopefully by asking I can get some headway.
I was attempting to restore to stock rom. At 17% of the process using LGFlashTool 1.8.6 the tool gave me an error 'Unable to Communicate with phone' after about 10 minutes of no progress. I exited the LGFlashTool program and ran it again and now it fails saying 'Cant' change to download mode". If I turn the phone off and then press Vol+ and plug in my cable it just goes to the Firmware Update screen. My phone *IS* detected properly in the device manager as LGE Andriod MTP Device and under ports as LGE Mobile USB Serial Port (COM41). If I go into recovery (Vol- and power) it asks if I want to do the restore - but it doesn't actually do anything once I say yes twice. Just sits at the firmware update screen at 0%.
I looked at this post (http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091) but it appears to be either for a different phone or different problem (showing in device manager as a bulk device - mine is not doing that). Frankly I don't want to make things worse (if that's possible)
Does anyone have a way that I can restore the download mode for this D852 phone? I'm hoping if I can get download mode to work again I can reflash the stock rom. I don't care about the data on the phone at this point.
I'm willing to send some $$$ via paypal to whomever can get me back up and running! Thanks
Click to expand...
Click to collapse
What happens when u just power up the phone ?

Thanks for the reply.
If I shut the phone down (by pulling battery) then plug it back in and just power it on, I get the LG logo then it goes to the firmware update screen with 'USER B84" in the box below the progress bar. Progress bar never moves. I get to this screen whether I start it in recovery (which is just the factory recov - looks like during the initial 17% it wiped out my TWRP), attempt to start it in download mode (I do not get the download mode screen with the blue dots anymore), or regularly by just holding the power button.

ok
Dont plug it into the computer and try to power it up what does ot do?

Same thing.

read this
http://forum.xda-developers.com/lg-g3/help/lg-g3-bricked-tried-everything-experts-t2852962 this might help

pacods61 said:
http://forum.xda-developers.com/lg-g3/help/lg-g3-bricked-tried-everything-experts-t2852962 this might help
Click to expand...
Click to collapse
Ok that didn't work for me but I did try the LGFlashTool using Board DL instead of Upgrade DL and it was moving a bit. Finally got to 10% and failed at 574 sec with the error "We can't communicate with Phone". I am using the cable that came with the phone. It isn't damaged or anything.
Here's what is shows in the LG Flashtool window (this is port 1 (com41)
Code:
PID: BS09S150309001007
IMEI: <myimei>
Model: D852
DLL: D852
BIN: <correct bin file from stock roms>
SWV: LGD852AT-01-V20C-302-720-FEB-04-(cuts off here can't read rest)
SWOV: LGD852AT-00-V20C-RGS-CA-FEB-04(cuts off here can't read rest)
Initializing
USB Connection Established
Start Download
LAF: Bin_User_Mode
PRIMARYGPT
MODEM
LAF:Bin_User_Mode
PRIMARYGPT
LAF:Bin_User_Mode
PRIMARYGPT
MODEM
[14: 7:28) We can't communicate with phone
00000064
On the phone it shows COM41 under the usb icon on under firmware update and 0% progress. In the box below it says:
Code:
F USER 50.0 A50.0 B70 UHS
S U LG-D852 04.4.2 Hrev_10
D85210b
D85210b
That's it. Should I leave the phone connected at this point or unplug it? Device still shown in device manager (have had it up beside the LG Flashtool window the whole time. I do see it refresh from time to time but the contents dont' seem to change at all.

Ok so I left this over night and when I checked the phone this morning it's different but I don't think it's good.
Looks like it proceeded but ended with:
FBOOT Check
FBOOT Complete Time [0s ] 1th try
Factory Reset Flag = 2
Factory Reset Flag Check Fail!!!
And my phone has a blue screen with Factory Reset Status and a big red '2'
Now what do I do?

Some further information.
If I run the LGFlashTool in Board DL action mode, it seems like the process works but I end up with the red 2 on the screen. But I don't get 'can't change to download mode' or 'cannot communicate with phone' errors.
However if I choose Upgrade DL action mode, then I get 'can't change to download mode' or cannot communicate with phone'. ARGH. What gives?
I have tried things like fresh restarts (restarting PC), restarting the LG FlashTool between attempts, not restarting flashtool, etc. I can't seem to find the sweet spot.

here
http://forum.xda-developers.com/sprint-lg-g3/help/fix-bricked-lg-g3-ls990-stuck-fastboot-t3084562 another tutorial to try

Thanks, but no dice.
I don't get fastboot options, and if i download and attempt to use fastboot, it shows no devices.
Also, when following the steps for the BOARD DL option in the lg flashtool, it goes through the process but I get no ATT screen. Nor do I get the option to tap OK or Normal - as soon as my device reboots after the flash, it gives me a MINI OS (iirc) screen with a bunch of vertical bars below it moving up and down then it changes to the Factory Reset screen with the number 2.

last one lol
http://androidforums.com/threads/ho...-2-lg-g3-d855-twn-32-gb-problem-fixed.911271/ i found one more that could help it said to use a jdz not a tot hope it helps if not sry

Thanks - I'm going to give this a try, however I can't finda .kdz file for my phone (canada/rogers D852 LG G3) - the links in that post that link to firmware is for a tot file. Does anyone have a link to the KDZ?

Hi, I'm having the exact same problem now, where the phone only boots to the Firmware Update screen. Did you manage to fix it?

Indeed.
I used the KDZ method pacods61 posted last, but I had trouble actually finding kdz firmware. With some help I finally managed to do so from here: http://devtester.ro/projects/lg-firmwares/country.php?country=Canada
Direct link for D852 Rogers Lolipop 5.0.1: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWF448V332CPAKX8CEA4UCE/D85220g_00_1205.kdz

Help!..Stuck on boot loop : "Secure boot error" error code 1014

Help please..My Lg G4 H815 is stuck on infinite loop since yesterday..
Just shord to be in words...My phone was stuck on lg logo after the battery whrn dead and then boots up and on the type the pin he restarted over and over, and i tried to reflash with LGUP and at 17% my phone restarted just like that..
Since then my phone is hanging on Secure booting error! Error code 1014.
What can i do..I got no warranty!
PS: I can't enter download mode (only shows Download mode and the the error and restarts)
I can't enter recovery(stock one) but when i him yes the second time to erase the error shows up and restarts.

Use the search option. Not for me and not for anyone else but to help yourself as fast as possible. You'll also learn stuff.
XDA user roopesh had the same problem: http://forum.xda-developers.com//g4/development/stock-h815-20a-stock-rom-t3233049/post63721579
He/she fixed their problem by following this guide: http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Or follow my guide:
i) Make sure you have the LG Drivers installed from here: http://oceanhost.eu/e4h2px4e0hkd/LGMobileDriver_WHQL_Ver_4.0.4.exe.htm
ii) Download the LG Bridge software from here: http://www.lg.com/us/support/product-help/CT10000025-1438110404543-preinstall-apps
iii) Remove the battery and reinsert it so the device it is fully off.
iv) While holding the up volume button, insert your USB cable.
v) You should enter download mode. Go to the Software Update tab of the LG Bridge. It will say connecting and then should say your device is up to date. Click on the recovery text on the bottom right and then follow the instructions. The software will download the system image for you and this is roughly 1.6GB so make sure your firewall doesn't block this connection.

I've searched everywhere i think..before i posted the question
The phone wont stay in download mode....
It shows the little box with download and then the error i mentionet above and restarts..
And means SEA mobile?

hey alex have you fixed your g4 ? i have same problem.

Solution for Hard Bricked LG G4 (9008)

Hi guys,
Some people including me faced Hard brick issue with LG G4, which has now two solutions. the first is temporary, i discovered it and it involves using an SD card flashed with Original EMMC dump ( i tested it with H815 ands H811) , the second needs advanced hardware, equipment and soldering skills ( JTAG) .
The solution that i want to explore is trying to revive the phone with the SD card.
http://forum.xda-developers.com/g4/development/unbrick-lg-g4-h811-9008-qualcomm-t3456417
http://forum.xda-developers.com/g4/development/unbrick-lg-g4-h815-9008-qualcomm-t3452853
The H811 dump that i made has TWRP recovery and unlocked bootlloader, so if someone know how to help that would be awesome.
How ???, its very simple. I dont have very good UNIX architecture skills , but if the SoC successfully booted from the SD card. We could see if it detects the EMMC memory ( with parted or with LS command). I personally Tried to brow /dev/block directory from TWRP i hoped to find MMCBLK1 or something but that was unsuccessful , im pretty sure the TWRP or the Soc Does not mount it automatically .
I really dont know How , but i'm very Sure that there is a Solution headed that way , So if some one is Good with Unix architecture and can find a way to soft Flash the EMMC from TWRP ( installed in the SD card ) it would be very Nice

hi,i tried the sd card method...it boots but immediately gives me secure boot error (1006).
i have an h815 bl locked

Hello
I have LG H815 and have bricked. I have installed wrong firmware so it is brick now.
I try new tot file with QPST . but it says fail what s wrong with me?
My computer is win 10 64 bit

You can fix fastboot mode with this way.
1. First you need to download stock rom that your phone supported. extract laf.img file from rom and copy it into fastboot directory
2. download LG Flash Tool and make it ready
3. open flash tool and load firmware and dll that support your model.
open command prompt and make sure you in fastboot directory where the fastboot and related files are stored.
Run following commands.
fastboot erase recovery
fastboot erase laf
fastboot flash laf laf.img
fastboot reboot
Click to expand...
Click to collapse
Hurry up, now you need to start flash with lg flash tool, if device does not start into download mode. remove battery and insert again, press and hold Vol Up btn and plug USB cable it will boot into download mode. and your device com port should be 41, if not change it in device manager. and start LG Flash tool to load stock rom. once it finish loading rom your device will start and will show you factory test 1, 2, or 3. if it stuck there more than 3-5 minutes. reboot your phone. now you will have welcome screen.
I hope this will work with supported models.
Hit Thanks button if this work for you to help others for this useful reply.

ayuda
sylentears said:
You can fix fastboot mode with this way.
1. First you need to download stock rom that your phone supported. extract laf.img file from rom and copy it into fastboot directory
2. download LG Flash Tool and make it ready
3. open flash tool and load firmware and dll that support your model.
open command prompt and make sure you in fastboot directory where the fastboot and related files are stored.
Run following commands.
Hurry up, now you need to start flash with lg flash tool, if device does not start into download mode. remove battery and insert again, press and hold Vol Up btn and plug USB cable it will boot into download mode. and your device com port should be 41, if not change it in device manager. and start LG Flash tool to load stock rom. once it finish loading rom your device will start and will show you factory test 1, 2, or 3. if it stuck there more than 3-5 minutes. reboot your phone. now you will have welcome screen.
I hope this will work with supported models.
Hit Thanks button if this work for you to help others for this useful reply.
Click to expand...
Click to collapse
hi , am sorry for my inglish is bad
my lg h815 don't have recovery mode , no fastboot mode , no logo,
without connection to the computer when before if it was
only when press power button the phone make a 1 vibration, but nothing more
i need help¡¡ the phone woking with normality , i make downgrade to mm, bootloader unlocked unofficial, install twrp and flash firmware to android n, flash rom v30 h-rom, and magistic, after swipe for reboot birck no more display
one more thing, when press power button the phone make a vibration but no image in the display , wait a 30 seconds and again press power button and appears a imagen with 0% and a connection cable but I connect it and nothing, the screen turns off, another thing when I remove the battery with the phone connected to the PC the non-battery icon appears but when I put it back it turns off I want to think that it is not hardware
the phone worked very well until I gave it a restart, I hope it is not the plate regarts from arequipa, PERU sorry for my inglish

MichaelCV said:
hi , am sorry for my inglish is bad
my lg h815 don't have recovery mode , no fastboot mode , no logo,
without connection to the computer when before if it was
only when press power button the phone make a 1 vibration, but nothing more
i need help¡¡ the phone woking with normality , i make downgrade to mm, bootloader unlocked unofficial, install twrp and flash firmware to android n, flash rom v30 h-rom, and magistic, after swipe for reboot birck no more display
one more thing, when press power button the phone make a vibration but no image in the display , wait a 30 seconds and again press power button and appears a imagen with 0% and a connection cable but I connect it and nothing, the screen turns off, another thing when I remove the battery with the phone connected to the PC the non-battery icon appears but when I put it back it turns off I want to think that it is not hardware
the phone worked very well until I gave it a restart, I hope it is not the plate regarts from arequipa, PERU sorry for my inglish
Click to expand...
Click to collapse
lol, when you see a screen with 0% and a usb connected image, that mean your battery dead
why not just try to charge your phone? or replace a battery?

ling751am said:
lol, when you see a screen with 0% and a usb connected image, that mean your battery dead
why not just try to charge your phone? or replace a battery?
Click to expand...
Click to collapse
Hello, well after what happened I thought the same and went to buy another battery and when they tried it did not work, I repeat, not fastboot, no logo, no recovery, only a small vibration without screen, it is not detected by the PC in any of its modes as dead, the detail is that this happened after restarting when I had flashed bootloader N, rom V30, magiistic, I gave it restart and it did not turn on again, so I discard that it is hardware .
I think the problem was that I flashed the bootloader with full aboot, that gave me hardbrick I was told in a forum in Spanish I leave the link I hope you help me thanks
https://www.htcmania.com/showthread.php?t=1397519 use this method to unlock the bootloader

Hey MichaelCV
I have exactly the same problem with my LG G4 H815p. I was running [ROM][H815] H-ROM G4 NOUGAT [v29a] _ LG G4. The phone was up and running and last night I flashed the "LG-H815_29a_Modem_and_Bootloader.zip" to try resolve an issue I was having with the mobile data indicator not showing. I flashed the zip in TWRP, rebooted the phone and now it is bricked. I have exactly the same symptoms as you. Windows and FWUL does not see the phone, no matter what combination of keypressed etc that I try.
Lets hope we find a solution here for it.
Chris

lenovo vibe p1 bricked while trying to flash lollipop via qpst .. pls help

i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help

mohamed_ragab09 said:
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
Click to expand...
Click to collapse
Hi Mohamed,
When you try to connect your dead phone to PC, does the PC or phone show any indications of detecting it?
If there's even a slight response like a notification sound in PC or blinking on the Phone LED or screen, there's a good chance we can revive it.
I am telling you this since I have been through this stage a few times.

renjujvcool said:
Hi Mohamed,
When you try to connect your dead phone to PC, does the PC or phone show any indications of detecting it?
If there's even a slight response like a notification sound in PC or blinking on the Phone LED or screen, there's a good chance we can revive it.
I am telling you this since I have been through this stage a few times.
Click to expand...
Click to collapse
thank you very much for your help .. i managed to unbrick my device with a friend's help .. he said he heated on the memory chips or something like that to make the phone readable .. apparently the flashing problem was my win 10 device because once the phone show 9008 com on flashing software the flash process went ok on his win 7 device

HTC 816w MT6582 "USB DEVICE NOT RECOGINZED" error after flashing,

Hi all,
Phone was showing "force closing" messages, I flash it with sp tool, now phone is dead which was due to flashing wrong PreLoader, Now phone showing only USB Device Not Recognized when trying to flash while press and holding down volume down button, I tried to short clo point with gnd but luck, Any good expert help to troubleshoot the problem to recover phone,
thanks
regards