Develop Bugs

[Q] Tempered glass

I want to use my phone without any case. I'm not afraid of scratches, but I'm afraid of screen cracking if I drop my phone. So my question is: if I use tempered glass, will it protect my screen from cracking? Or they will both be cracked? And I also want that glass is the thinnest. So I was thinking about getting 0.15 mm tempered glass. Is it different from 0.3mm or 0.4mm in term of protection, or does only the hardness matter?
Thank you for your reply.

I've dropped mine many many times onto wood and concrete without a screen protector. The phone is a little chipped and scratched, but the screen is absolutely fine.
A nilkin tempered glass screen protector is a good investment as it feels brilliant although when I dropped mine with that on it smashed the corner of the protector.
The edges of the phone are slightly raised so without the screen protector on, a drop onto a flat surface will not damage the screen but will damage the screen protector.
A drop onto a raised surface like a stone would probably break the screen protector but don't know if it'd also damage the screen.
Question is, how often do you drop your phone, and how much do you want to spend on glass protectors?

HtcOneJon said:
I've dropped mine many many times onto wood and concrete without a screen protector. The phone is a little chipped and scratched, but the screen is absolutely fine.
A nilkin tempered glass screen protector is a good investment as it feels brilliant although when I dropped mine with that on it smashed the corner of the protector.
The edges of the phone are slightly raised so without the screen protector on, a drop onto a flat surface will not damage the screen but will damage the screen protector.
A drop onto a raised surface like a stone would probably break the screen protector but don't know if it'd also damage the screen.
Question is, how often do you drop your phone, and how much do you want to spend on glass protectors?
Click to expand...
Click to collapse
I was thinking about Nillkin, but I think it would be too thick. So I'm considering those 0.15 mm protectors in this topic: http://forum.xda-developers.com/htc...5mm-dot-view-friendly-tempered-glass-t2810825
I also thought about xtremeguard, since I use their normal protectors and they are great. It 50$, but with 85% off coupon it's just a few bucks. Only problem is that it's 0.4mm.
Which one would you recommend? I'm planning to spend 10-15$, because 40-50$ is really to much for a protector, in my opinion.

This is the one I use:
ZeroLemon® Ultra Glass Armor - 9H Premium Tempered Glass Screen Protector for HTC One M8

Oditius said:
This is the one I use:
ZeroLemon® Ultra Glass Armor - 9H Premium Tempered Glass Screen Protector for HTC One M8
Click to expand...
Click to collapse
Is it noticable a lot while it's on the phone, since it's 0.3mm?

HTC_One_M8_91 said:
Is it noticable a lot while it's on the phone, since it's 0.3mm?
Click to expand...
Click to collapse
If your looking for it, but after putting on, I haven't paid much attention to it. I dropped my phone once, chipped away at the edges of the shield. The seller replaced it free. I like tempered glass, it is the only screen proctor I will put on my phones. The only bad thing is that it goes edge to edge with the glass. So if you have a case that touches the screen, that might cause a problem. I use a thin clear cars I got off ebay. Works for me.
Ultra 0.5mm Slim TPU Skin Clear new Case Transparent Cover

Oditius said:
If your looking for it, but after putting on, I haven't paid much attention to it. I dropped my phone once, chipped away at the edges of the shield. The seller replaced it free. I like tempered glass, it is the only screen proctor I will put on my phones. The only bad thing is that it goes edge to edge with the glass. So if you have a case that touches the screen, that might cause a problem. I use a thin clear cars I got off ebay. Works for me.
Ultra 0.5mm Slim TPU Skin Clear new Case Transparent Cover
Click to expand...
Click to collapse
The only annoying thing could be top edge, when I pull down notification bar.
Case wouldn't be a problem, because I'm planning to use phone without case, and that why I'm looking for a tempered glass, to protect screen from cracking.

HTC_One_M8_91 said:
The only annoying thing could be top edge, when I pull down notification bar.
Case wouldn't be a problem, because I'm planning to use phone without case, and that why I'm looking for a tempered glass, to protect screen from cracking.
Click to expand...
Click to collapse
Actually then it could be a benefit, because going edge to edge means you will probably not touch the edge. And the edge is not sharp, nice and smooth. The price is cheap enough to try it. I have tried several over the last few months, mostly from China. But this is US born and works and feels great.

Best Galaxy S8+ Screen Protector?

Hello,
I am looking to purchase a new Samsung Galaxy S8+ screen protector. I was planning on getting this case but I had wanted a screen protector as well to protect such a device. Any suggestions? I've looked online and heard to find a good one is rare due to the fact of the curved edges as well as it being an expensive phone. Any help would be appreciated.
Side-Note: Any suggestions for another case would be nice as well, I like the one linked above but something with a slim factor would be nice too!

https://www.amazon.com/Whitestone-D...1497757988&sr=1-1&keywords=whitestone+s8+plus
Works well with the Spigen Neo Hybrid too.

Idk I've gone through 3 screen protectors with the same case listed above for some reason the case grabs the side of the screen protectors and it bubbles up I tried two expensive tempered glass screen protectors and each one with that same case popped off my phone so irritated right now I'm using just my bro hybird case with no screen protection

Ricey said:
...
(Whitestone Dome)
...
Works well with the Spigen Neo Hybrid too.
Click to expand...
Click to collapse
unfortunately, they do not deliver to Europe...
---------- Post added at 08:11 AM ---------- Previous post was at 08:05 AM ----------
Tazz. said:
Hello,
I am looking to purchase a new Samsung Galaxy S8+ screen protector. I was planning on getting this (Spigen Neo) but I had wanted a screen protector as well to protect such a device. Any suggestions? I've looked online and heard to find a good one is rare due to the fact of the curved edges as well as it being an expensive phone. Any help would be appreciated.
Side-Note: Any suggestions for another case would be nice as well, I like the one linked above but something with a slim factor would be nice too!
Click to expand...
Click to collapse
I am also in searching of some good glass... Unfortunately, all reports are so far divided. Some could manage put some glass, the others have more problems... In the other theme GravX put an interesting video with test samples with full adhesive tempered glass from alibaba. Itnwill take some time, until this will be available on amazon

Ricey said:
https://www.amazon.com/Whitestone-D...1497757988&sr=1-1&keywords=whitestone+s8+plus
Works well with the Spigen Neo Hybrid too.
Click to expand...
Click to collapse
Don't think I'll pay $45 for a screen protector...

Tazz. said:
Don't think I'll pay $45 for a screen protector...
Click to expand...
Click to collapse
It is worth it. I screwed up the install and they sent me a new tube of glue and screen protector for free.

I finally just gave up on finding a tempered glass protector I opted for a liquid glass nano screen protector applied two coats and slapped my case on no scratches nothing and I always end up throwing my phone in my pocket with my keys highly satisfied also barely any smudges it's legit for those have any trouble I recommend liquid glass Qdamix liquid glass to be exact
Fyi don't be the idiot who still doesn't have a military grade case on it.. if you drop the phone without a case the screen will crack period with a tempered glass or not so don't be an idiot and think this is gonna make the phone bullet proof nah it just prevents scratches nothing else!

Jamaicanexec said:
I finally just gave up on finding a tempered glass protector I opted for a liquid glass nano screen protector applied two coats and slapped my case on no scratches nothing and I always end up throwing my phone in my pocket with my keys highly satisfied also barely any smudges it's legit for those have any trouble I recommend liquid glass Qdamix liquid glass to be exact
Fyi don't be the idiot who still doesn't have a military grade case on it.. if you drop the phone without a case the screen will crack period with a tempered glass or not so don't be an idiot and think this is gonna make the phone bullet proof nah it just prevents scratches nothing else!
Click to expand...
Click to collapse
Be careful, that liquid screen protector stuff is mostly snake oil. I've been caught out with it before and ended up with scratches just with the phone being in my pocket.

Screen Protectors for Samsung S8 Plus
Ounier Galaxy S8 Plus Tempered Glass Screen Protector, [Case Friendly][Easy Installation Tray] 3D Curved Tempered Glass Screen Protector (Black)
Due to curved edges of Galaxy S8 Plus, traditional full screen glass screen protectors will generate a halo effect on the edges. We have developed a Dot Matrix glass screen for Galaxy S8 Plus, which offers full screen protection without any bubbles or halo effects. This is accomplished with state of the art technology by placing hundreds of microscopic transparent dots on the screen protector to mimic the contact of your finger on the screen.

I'm using Spigen Glas.Tr full cover glass. Definitely recommend!

Galaxy S8+ Tempered Glass Screen Protector
:REamazon.com/Ounier-Tempered-Protector-Friendly-Installation/dp/B07D49319D:RE
Galaxy S8+ screen protector only compatible for Samsung Galaxy S8+
High Definition (HD) clear,hassle-free,dust-free, fingerprint-free, bubble free.
Galaxy S8+ Tempered Glass protective your device avoid drop,scratches, dents and abrasions. Prevents dust
Easy to install, specifically designed for Samsung Galaxy S8+ with a tray, help you install the screen protector perfectly.
Highly durable, shatterproof, and scratch resistant - surface hardness 9H and 0.5％ long-last anti finger print coating.

I'm using Nillkin 3D CP max and is realy good.
Always satisfied with Nillkin on all my phones.

Jamaicanexec said:
Idk I've gone through 3 screen protectors with the same case listed above for some reason the case grabs the side of the screen protectors and it bubbles up I tried two expensive tempered glass screen protectors and each one with that same case popped off my phone so irritated right now I'm using just my bro hybird case with no screen protection
Click to expand...
Click to collapse
Get this one it's perfect for cases, supacase and spigen no issue no peeling off and it's only 4 odd pounds from ebay!

Would installing this Screen Protector on a screen with a little scratch FUBAR the installation?

Force Glass is no good
Hi,
I have this glass protection supposedly life guaranteed but it left bubbles on my screen even with the set up device included.

i buy the glass protectors that show a hammer hitting the screeen and then for an added measure when i put my phone in my pocket i turn the screen towards my leg

Clayco [Hera Series] Full-body Rugged Case with Built-in Screen Protector

The screen protector on this is really good, and the case provides all around protection for your device. It provides a better grip on your phone and offers premium protection without feeling bulky. It even has little covers for the headphone jack and charger port to keep dust out. I've dropped it a few times and it's paid for itself. For $20 you can't go wrong with this case.
It bought it here on Amazon.

Is this bulky?
Is it a cheaper version of an otterbox?
Does it need an extender to use both the USB charging port and the headphone port?

sanjsrik said:
Is this bulky?
Is it a cheaper version of an otterbox?
Does it need an extender to use both the USB charging port and the headphone port?
Click to expand...
Click to collapse
No this is not as big as an OtterBox you won't be disappointed and you don't need extenders
---------- Post added at 05:18 PM ---------- Previous post was at 05:17 PM ----------
I would recommend this case to anyone it's a good value with great all around protection

I have this case and it is very good with a cheap price

sanjsrik said:
Is this bulky?
Is it a cheaper version of an otterbox?
Does it need an extender to use both the USB charging port and the headphone port?
Click to expand...
Click to collapse
It's not bulky at all, though it does make the phone feel slightly larger, but with a better grip. It feels sturdy, too, so you know it'll protect it well even if you drop it.
It is similar to an Otterbox, yes, though it is much cheaper compared to $80+ for Otterbox cases.
No, you don't need an extender. It works fine with the headphones and charger that come with it. I did need to buy one for my radio transmitter (my car is old and doesn't have Bluetooth yet). I'd take pictures of it but my old Nexus 6 was stolen, so I don't have another camera at the moment.

how is the shockproof?

jinshanghaiaraol said:
how is the shockproof?
Click to expand...
Click to collapse
Pretty good. I've dropped it a few times with no issues.

GuyInDogSuit said:
It's not bulky at all, though it does make the phone feel slightly larger, but with a better grip. It feels sturdy, too, so you know it'll protect it well even if you drop it.
It is similar to an Otterbox, yes, though it is much cheaper compared to $80+ for Otterbox cases.
No, you don't need an extender. It works fine with the headphones and charger that come with it. I did need to buy one for my radio transmitter (my car is old and doesn't have Bluetooth yet). I'd take pictures of it but my old Nexus 6 was stolen, so I don't have another camera at the moment.
Click to expand...
Click to collapse
As a case, it's probably one of of the best on the market. However, as a screen protector it's just ok. Screen protector scratches easily and eventually, it will require a replacement. However, there is no option to buy screen protector separately.

im using lifeproof nuud and its pretty slim and all around protection.

ocujos said:
As a case, it's probably one of of the best on the market. However, as a screen protector it's just ok. Screen protector scratches easily and eventually, it will require a replacement. However, there is no option to buy screen protector separately.
Click to expand...
Click to collapse
well I disagree with your assertion that there is no seperate option for screen protector, the official Samsung soft screen protectors for the s8 work perfect, it is just that they are not glass. Apparently there still is not a good option for glass so I may stick with that

distantneighbor said:
well I disagree with your assertion that there is no seperate option for screen protector, the official Samsung soft screen protectors for the s8 work perfect, it is just that they are not glass. Apparently there still is not a good option for glass so I may stick with that
Click to expand...
Click to collapse
You're arguing semantics. Ocujos is correct in saying there is there is "no option to buy screen protector separately."
The Clayco Hera case consists of 2 pieces: the frame that attaches to the top of the phone and to which a hard plastic screen protector is glued, and a 2nd frame that attaches to the back of the phone. The 2 frames lock together to provide complete 360 degree coverage. When the hard plastic screen wears out from scratches, you cannot purchase a new top frame piece containing the plastic screen protector separately from Clayco, so ocujos is absolutely right.
The choices are to buy a complete new case (not a bad option considering they're so cheap), or cut out the old old plastic screen from the frame and use a separate glass or film screen protector, but I can assure you film is probably the least functional alternative.
I have the Hera case on my LG V30. I wore out the plastic screen, ended up removing the old plastic screen from the frame, and applied a film protector. However, when removing the top frame from my phone to clean it often resulted in peeling the edges of the film. I had the same issues using tempered glass with adhesive only on the edges.
IMO, the best replacement for a worn plastic screen on the Hera and all other i-Blaison cases with screen protectors is to use tempered glass with LOCA adhesive. The glue will prevent the glass from lifting when popping the top frame off the phone.

After about 9 months my Clayco Hera screen protector has started "peeling" (see attached photo). At first, it was a small patch. Now it's covering almost the whole screen. I've kept my phone indoors and in my pocket most of the time.
Has anyone else had this issue?

I think mine is starting to do that, as well. It's very light and barely there, but I think that's what is happening.

GuyInDogSuit said:
I think mine is starting to do that, as well. It's very light and barely there, but I think that's what is happening.
Click to expand...
Click to collapse
Expect a rapid deterioration from this moment on. Within a week of two from first noticing the issue , it spread across the whole screen. I've contacted i-Blason support and am waiting for a response.

My wife's S8 plus screen cracked when using this case but the built in screen protector in the case didn't crack... Weird.

ajsmsg78 said:
My wife's S8 plus screen cracked when using this case but the built in screen protector in the case didn't crack... Weird.
Click to expand...
Click to collapse
Plastic screen protectors are only good to stop scratching glass. For a complete protection you need a *real* hardened glass screen protector like WhiteStone Dome.

ocujos said:
Plastic screen protectors are only good to stop scratching glass. For a complete protection you need a *real* hardened glass screen protector like WhiteStone Dome.
Click to expand...
Click to collapse
The case has a built in tempered glass screen protector.

ajsmsg78 said:
The case has a built in tempered glass screen protector.
Click to expand...
Click to collapse
My Samsung S8 Plus is protected by a Clayco (i-blason) Hera case. The built-in screen protector is made of *plastic*!
Plastic is not as strong as e.g. 9H hardened glass. Where glass screen protector will absorb the impact, plastic would just pass it onto the screen.

Cases that work with Whitestone Dome glass

I've been waiting to install my whitestone dome glass until I finally received a full body case. I finally received 2 of the Spigen cases and I come to find out that if I install the whitestone glass then the front part of the case won't go on, on either of my cases. Has anyone found a case that works with the whitestone dome glass.
Just in case you're wondering I have the Spigen Thin Fit design case and the Spigen Ultra hybrid design clear case.

I wouldn't imagine that there would a front case cover that would be compatible with the Whitestone Dome screen protector due to the fact that the screen protector curves. If the case is made to fit over the tempered glass than the plastic around that area would much thinner and weaker. This might be possible if the case is made out of Aramid. Then this is were my mind goes in circles, why didn't Samsung create an Aramid front cover and just the back one only. When I first noticed that the Whitestone screen protector I immediately thought there will be for sure many complaints regarding either "defective" or bad design screen protectors due to the pressure of the front case cover on the screen protector, causing the protector to shift.

nunyabiziz said:
I wouldn't imagine that there would a front case cover that would be compatible with the Whitestone Dome screen protector due to the fact that the screen protector curves. If the case is made to fit over the tempered glass than the plastic around that area would much thinner and weaker. This might be possible if the case is made out of Aramid. Then this is were my mind goes in circles, why didn't Samsung create an Aramid front cover and just the back one only. When I first noticed that the Whitestone screen protector I immediately thought there will be for sure many complaints regarding either "defective" or bad design screen protectors due to the pressure of the front case cover on the screen protector, causing the protector to shift.
Click to expand...
Click to collapse
This is what I was worried about. It didn't seem like the whitestone would fit with a front case. So i guess leads to the next question, what will provide better protection, a whitestone glass or a front case. I feel like day to day, the front case will help prevent a lot of scrapes and scratches but when your drop it, i don't know if it will really protect the screen. Decisions decisions. First world problems....

mmafighter077 said:
This is what I was worried about. It didn't seem like the whitestone would fit with a front case. So i guess leads to the next question, what will provide better protection, a whitestone glass or a front case. I feel like day to day, the front case will help prevent a lot of scrapes and scratches but when your drop it, i don't know if it will really protect the screen. Decisions decisions. First world problems....
Click to expand...
Click to collapse
So for protection, front case would be the way to go. This wouldn't apply to all case, ie something sharp could still damage the outside screen. If a drop does happen, front case or just case would offer better protection. The downside on most front cases, are the limited ability to swipe down or just touch response around the edges of the screen.

nunyabiziz said:
I wouldn't imagine that there would a front case cover that would be compatible with the Whitestone Dome screen protector due to the fact that the screen protector curves. If the case is made to fit over the tempered glass than the plastic around that area would much thinner and weaker. This might be possible if the case is made out of Aramid. Then this is were my mind goes in circles, why didn't Samsung create an Aramid front cover and just the back one only. When I first noticed that the Whitestone screen protector I immediately thought there will be for sure many complaints regarding either "defective" or bad design screen protectors due to the pressure of the front case cover on the screen protector, causing the protector to shift.
Click to expand...
Click to collapse
nunyabiziz said:
So for protection, front case would be the way to go. This wouldn't apply to all case, ie something sharp could still damage the outside screen. If a drop does happen, front case or just case would offer better protection. The downside on most front cases, are the limited ability to swipe down or just touch response around the edges of the screen.
Click to expand...
Click to collapse
I found this today. This guy installed both the whitestone glass and the Spigen case at the same time. You just have to deal with the front case being lifted a little. But it's not that bad.
https://youtu.be/p2pL7RvykuY

https://www.reddit.com/r/GalaxyFold/comments/jd4bgg/finally_a_case_that_works_with_whitestone_dome/

chuynh1109 said:
https://www.reddit.com/r/GalaxyFold/comments/jd4bgg/finally_a_case_that_works_with_whitestone_dome/
Click to expand...
Click to collapse
This is good to know. Did you purchase it?

mmafighter077 said:
This is good to know. Did you purchase it?
Click to expand...
Click to collapse
yeah, that's my thread over on reddit. The ebay seller is great and it's fast shipping too.

Anyone just using screen protectors and no case?

Just can't find a front and rear case that I'm 100% with. They are mainly to Bulky or to flimsy.
Ao at present I'm using front, rear and hinge 'screen protectorso
Think I might be being foolish though. Guarantee I drop it now!

Same here actually. I have the Armid case from Samsung but I usually prefer phone naked so it is the same with Fold 2. I didn't remove yet the inner screen protector but planning to.

I was using the phone without any protective case because like you said, none of them fits 100% to my liking, and guess what happened. I have dropped the phone from 2 feet and cracked the edge of the front screen. I couldn't sleep for 2 days how upset I was, but fortunately my local Samsung care center replaced the screen right away for roughly $150.00, but they installed new front screen that has absolutely no factory screen protection, so I am using the phone naked outside. Yesterday my Ringke case arrived so I put it on immediately, just in case but it's not perfect. But I will have to live with it. I am receiving Samsung Aramid case tomorrow, so I will see which one I will keep on the phone.

I don't know if this idea is good to remove the inner display protector. I don't do this. for what ? perhaps scratches in the inner display ? not for me
has anybody removed the outer display protection ? I think this is not a big problem cause gorilla glass victus is here.

D.J.ChriZZ said:
I don't know if this idea is good to remove the inner display protector. I don't do this. for what ? perhaps scratches in the inner display ? not for me
has anybody removed the outer display protection ? I think this is not a big problem cause gorilla glass victus is here.
Click to expand...
Click to collapse
It doesn't matter what sort of glass it is, if you look at the right hand side corners the glass is bulged out so any impact there will 100% shatter it. I had/ have a note 20 ultra with a broken screen, still under repair (for more than a month now) so don't completely trust the victus branding.. glass is glass and glass breaks :crying:

D.J.ChriZZ said:
I don't know if this idea is good to remove the inner display protector. I don't do this. for what ? perhaps scratches in the inner display ? not for me
has anybody removed the outer display protection ? I think this is not a big problem cause gorilla glass victus is here.
Click to expand...
Click to collapse
I removed the inner screen protector as I didn't like the feeling of it. It was also very difficult to keep clean of fingerprints and smudges and I was unable to see past that.
Now, the screens looks and feels ALOT better, but I've noticed some small scratches on the screen. They appear to come from my left thumb nail while scrolling. Even though I keep my nails fairly short. The scratches are only visible when the screen is off an from the right angle. I can't feel them, but they can be wiped away.
There aren't enough bad scratches to bother me yet and I don't regret removing the protector... but I thought you should know.
If the scratches get bad, I'll get a screen replacement and maybe consider a protector... but I'll only keep the phone for a year, so it'll probably be naked again even after a replacement ??

I went naked as well for tha same reason I couldn't find a good case...stock screen protector inside and out!

No protectors inside or out, no case, pure naked. It's a joy to run this way but one little drop later I could be weeping like a schoolgirl with a skinned knee. That window ends in about a week as I finally found a case as premium as the phone and I'll be in a wallet soon.

I use only this for carring the phone.
this fits very good !
https://www.fjallraven.com/de/de-de/kinder/accessoires/kanken-pen-case?_t_q=&_t_hit.id=Luminos_Storefront_Web_Features_Catalog_Product_Domain_CommonProduct/CatalogContent_91278d42-b27b-47e1-ae7b-da4ce7f270e7_de-DE&_t_hit.pos=4&_t_tags=andquerymatch%2clanguage%3ade%2csiteid%3a162d49d9-f0ac-4d2d-a110-e8143f6ca828&v=F23783%3a%3a7323450464196

Fit good for the first test. Arrived today from china ...

I think the naked looks and feels the best!!! Then why using covers, protectors, or else!!!

I use on all sides hydrogel. And works great... I drop it 4 times to all surfaces and still no scratch.

I'm not prone to dropping my phones or having butter fingers, however I don't want to chance it. So far I have purchased a Whitestone dome for the front (have not installed it yet), Samsung's aramid and leather cover (still waiting on my leather cover to arrive). The last phone I rocked without a case was my HD2? That thing is a tank!

No case ..
Only screen protector inside and outside
Sent from my SM-F916B using Tapatalk

My simple experience after around 2 months of use. I finally got the courage few days back to remove the inner screen. Knowing I prefer always my phone without a case and a protector.
The inner screen , without a doubt is way clearer and less smudgy without one and it is perfect.
Anyways, I have already bought 2 orotectors, both are somehow the sam price, however, one turned out to be excellent and as good as without protector and one is more smudgy than the original.
My recommendation for ones who doesn't want to keep inner screen without protection is to get the good one, you get the best of both words, clarity and protection.
I have the samsung aramid case since day one but I never used to be honest, only the first few days...
The good protector and the bad one in sequence:
https://www.amazon.ae/ccessory-Scre...+&sr=1-1-82924ca5-d5c8-45d1-a40c-360835499ae5
https://www.amazon.ae/FanTing-Samsu...+&sr=1-2-82924ca5-d5c8-45d1-a40c-360835499ae5
---------- Post added at 05:17 PM ---------- Previous post was at 05:14 PM ----------
I forgot to mention both came in a typical outside packaging to my surprise... I thought they are bluffing actually

I used matte black outside screen protector and Orzero inner screen protector which is night and day comparing to the stock plastic feel one. For case, I went with Spigen Slim case works well because I dropped the phone once and some minor scratches on the edges.
Amazon.com: (2 Sets) Orzero 2 Pack Soft Front Screen Protector and 2 Pack Inside Screen Protector Compatible for Samsung Galaxy Z Fold2 5G, High Definition Anti-Scratch Bubble-Free (Lifetime Replacement)
Amazon.com: (2 Sets) Orzero 2 Pack Soft Front Screen Protector and 2 Pack Inside Screen Protector Compatible for Samsung Galaxy Z Fold2 5G, High Definition Anti-Scratch Bubble-Free (Lifetime Replacement)
www.amazon.com

D.J.ChriZZ said:
Fit good for the first test. Arrived today from china ...
Click to expand...
Click to collapse
What case is this you're using? Looks good! Interested in buying one myself.

I just removed the inner (original) screen protector and installed matt hydropel screen protector. The original one is really just badly . I like the matt taste now on the inner screen and of course no fingerprints anymore...

I went ahead a few days ago and removed the inner and outer screen protectors. The inner was getting nastier looking with smudges plus I signed up for Samsung Care+ so if anything happens to the screen I only pay like $29 for a replacement.