Related
hi guys I have an LG G Pad updated to kitkat officially, I have root it and I was installing the clockworkmod recovery using the recoveryinstaller.apk,
when I have tapped on flash recovery my device got stuck on black screen!!! I have tryied all buttons combination but nothing and the lg pc suite or mobiletool cannot do anything.......what I have to do?
Try to power off your g pad and turn it on again. If it get you to recovery mode, then you should connect it to your PC and try LG Support Tool to restore to factory kit Kat update.
Sent from my LG-V500 using Tapatalk
DonutCommander said:
hi guys I have an LG G Pad updated to kitkat officially, I have root it and I was installing the clockworkmod recovery using the recoveryinstaller.apk,
when I have tapped on flash recovery my device got stuck on black screen!!! I have tryied all buttons combination but nothing and the lg pc suite or mobiletool cannot do anything.......what I have to do?
Click to expand...
Click to collapse
If nothing else works, just enter Download mode and recover with LG Mobile Suite. To enter download mode:
1) With machine off, and cable plugged into the tablet but not into computer, hold volume up and down button at the same time (NOT power button).
2) Still holding the combination, plug into the computer. It will now enter Download mode. This can sometimes be tricky if the tablet won't stay off. The key is: on/off unplugged and still holding it-> plug into computer.
When you see the Download Mode on the screen (feel free to unplug the USB as it will now hold the mode until told otherwise), load the LG Mobile Suite and install the standard ROM.
Hi i tryied to put the device in download mode but the pc won't recognize it I can hear the sounds of Windows about the peripheric but the tablet continue to remain in black screen and the support tool won't recognize it.... I can try with another pc but for lg the warranty can pass with root?
Inviato dal mio C6903 utilizzando Tapatalk
DonutCommander said:
Hi i tryied to put the device in download mode but the pc won't recognize it I can hear the sounds of Windows about the peripheric but the tablet continue to remain in black screen and the support tool won't recognize it.... I can try with another pc but for lg the warranty can pass with root?
Inviato dal mio C6903 utilizzando Tapatalk
Click to expand...
Click to collapse
Hi,
I'm in the same boat. I bought the device rooted and it was working fine, then after a day it just shut off when I was in recovery. It wasn't even while I was doing anything to it. I had rebooted into recovery from an apparently stable ROM. The battery was at about 40%. Now there are no lights and almost no sign of life at all. Occasionally when trying to connect it I get the cursor change that indicates that a USB device has connected but the LG Mobile app won't recognize it. Is there any chance that I'm just not pressing the buttons correctly? The instructions I've read say to make sure that the device is off, but I don't know how to tell conclusively that it's off. Has anyone had any similar experience, or is there something else I can try?
Thanks
badwiring said:
Hi,
I'm in the same boat. I bought the device rooted and it was working fine, then after a day it just shut off when I was in recovery. It wasn't even while I was doing anything to it. I had rebooted into recovery from an apparently stable ROM. The battery was at about 40%. Now there are no lights and almost no sign of life at all. Occasionally when trying to connect it I get the cursor change that indicates that a USB device has connected but the LG Mobile app won't recognize it. Is there any chance that I'm just not pressing the buttons correctly? The instructions I've read say to make sure that the device is off, but I don't know how to tell conclusively that it's off. Has anyone had any similar experience, or is there something else I can try?
Thanks
Click to expand...
Click to collapse
Just follow the instructions above. If it has no charge, you may plug it in the wall for 15 minutes before starting.
Subtleone said:
Just follow the instructions above. If it has no charge, you may plug it in the wall for 15 minutes before starting.
Click to expand...
Click to collapse
I've done it many times but there's an element of uncertainty because I can't tell whether it's on or off. My Sony would go through some cycles of blinking lights. I'm probably overlooking something obvious. How do you tell whether it's off, or at least make a good guess?
Thanks
I'm so sad but my device still remain in black screen and I don't know if it is on or off but when plugged windows make a sound but the support tool won't recognize it.. I have installed the drivers from everywhere and changed the pc but nothing my last change is to tryied with Windows xp or sending the device to lg assitance
Inviato dal mio C6903 utilizzando Tapatalk
me too
Hi all,
I've got exactly the same problem, maybe even worse ....
Been reading all about unbricking, updating, recovering etc ... Downloaded about all software I could lay hands on...none working. The B2CAppSetup, which is supposed to install the Mobile Tools doesn't even recognise my Internet Connection , go figure... Or is that suposed to be a fixed-line connection instead of WIFI? I've got some 'off-line-fixed-tools' that starts OK, but as soon as I point it to the *.kdz file and apropriate *.dll's, it just stops with an extract-error. The flashtool I found doesn't find any device on any port,etc etc etc ...
My G-Pad is only running in a kind of bootloop (LG-logo 2x, the death-droid, and again from the beginning) The 'recovery-mode' isn't doing anything and the only thing that surely works is 'download-mode'. But then again, Win XP sees several LGE-USB-devices which are NOT recognised by the LG-software.
Any one ?
Dirk
dirlan2001 said:
Hi all,
I've got exactly the same problem, maybe even worse ....
Been reading all about unbricking, updating, recovering etc ... Downloaded about all software I could lay hands on...none working. The B2CAppSetup, which is supposed to install the Mobile Tools doesn't even recognise my Internet Connection , go figure... Or is that suposed to be a fixed-line connection instead of WIFI? I've got some 'off-line-fixed-tools' that starts OK, but as soon as I point it to the *.kdz file and apropriate *.dll's, it just stops with an extract-error. The flashtool I found doesn't find any device on any port,etc etc etc ...
My G-Pad is only running in a kind of bootloop (LG-logo 2x, the death-droid, and again from the beginning) The 'recovery-mode' isn't doing anything and the only thing that surely works is 'download-mode'. But then again, Win XP sees several LGE-USB-devices which are NOT recognised by the LG-software.
Any one ?
Dirk
Click to expand...
Click to collapse
If you are in download mode, then you are halfway there. As to the drivers, try uninstalling them and reinstalling. Then enter the LG Mobile Suite fresh and try from there.
---------- Post added at 02:47 AM ---------- Previous post was at 02:46 AM ----------
badwiring said:
I've done it many times but there's an element of uncertainty because I can't tell whether it's on or off. My Sony would go through some cycles of blinking lights. I'm probably overlooking something obvious. How do you tell whether it's off, or at least make a good guess?
Thanks
Click to expand...
Click to collapse
If you hold the power button for a few seconds, you will see it go off, even if it is showing a black screen. The difference will be visible.
Subtleone said:
If you are in download mode, then you are halfway there. As to the drivers, try uninstalling them and reinstalling. Then enter the LG Mobile Suite fresh and try from there.
Click to expand...
Click to collapse
That's about 3156486 times I've been doin' that, to no avail, if you must know
My guess is ,again, that this software refuses to connect over WIFI and only works on cabled line...
I keep trying , tnx anyway.
Cheers, Dirk
dirlan2001 said:
That's about 3156486 times I've been doin' that, to no avail, if you must know
My guess is ,again, that this software refuses to connect over WIFI and only works on cabled line...
I keep trying , tnx anyway.
Cheers, Dirk
Click to expand...
Click to collapse
NVM. Misread. Anyhow, I found it doubtful that the LG Mobile Suite has issues with WiFi specifically, since the software has no way of knowing how it is receiving data via the internet. It may be an XP issue.
Subtleone said:
NVM. Misread. Anyhow, I found it doubtful that the LG Mobile Suite has issues with WiFi specifically, since the software has no way of knowing how it is receiving data via the internet. It may be an XP issue.
Click to expand...
Click to collapse
This worked for me on 2nd attempt
https://www.youtube.com/watch?v=ASllzBNc6hw
http://forum.xda-developers.com/showthread.php?t=2471370
My guess is ,again, that this software refuses to connect over WIFI and only works on cabled line...
I keep trying , tnx anyway.
Click to expand...
Click to collapse
I had a similar issue with Sony's Emma update tool. On one of my computers (a Fujitsu Lifebook) it consistently failed saying that I had no internet connection. Another computer was fine.
My bricked LG-V500 must have been some hardware issue. I wondered if I had done something because I was flashing various ROMs, but I didn't do anything careless and it died when I inserted an SD card, not while I was performing any updates. I had just bought it on eBay and I really didn't want to make the seller deal with it (even though he had rooted and tinkered with it) when there was a decent chance that I had done it anyway. He sent me his newegg invoice, I returned it to them, and they just sent out the replacement.
LG G Pad black screen
DonutCommander said:
I'm so sad but my device still remain in black screen and I don't know if it is on or off but when plugged windows make a sound but the support tool won't recognize it.. I have installed the drivers from everywhere and changed the pc but nothing my last change is to tryied with Windows xp or sending the device to lg assitance
Inviato dal mio C6903 utilizzando Tapatalk
Click to expand...
Click to collapse
Hi, I have an LG G Pad v500 with the same problem. I was trying to unlock my bootloader. Then I replaced my aboot to this one http://forum.xda-developers.com/show....php?t=2698267, following this guide: http://www.grupoandroid.com/topic/1....t-todo-en-uno/.
I have an LG L70 D325 and it worked to me, so I tried to do the same with my LG G Pad.
Now my LG G Pad doesn't turn on. My screen is black and I can't access "Download Mode" nor "Recovery Mode" and nothing else. It's seems like my device is dead.
Can someone help me?
Is there something that I can do to fix my device?
I appreciate all kind of help!!!
DonutCommander said:
I'm so sad but my device still remain in black screen and I don't know if it is on or off but when plugged windows make a sound but the support tool won't recognize it.. I have installed the drivers from everywhere and changed the pc but nothing my last change is to tryied with Windows xp or sending the device to lg assitance
Inviato dal mio C6903 utilizzando Tapatalk
Click to expand...
Click to collapse
I know this is old 3 year old reply. But i'm fighting with same issue on my T-Mobile LG PAD V521. Did you get this fixed or could tell me how? I don't know when tablet is on or off and can't tell.
I understand it has to be off for download mode but problem is it might take long time for battery to be "off".
Thank you
I'm in a bit of a pickle...
Phone is dead, I'm unable to wake it using any method, however PC sees the device being connected. I have tried to restore TWRP backup which was completed correctly but then phone stuck and failed to wake up again. I have tried to unbrick it using the LG flash tool and dll +tot files however this method fails each time -with factory model check error - and download fail notification. Right now im waiting for kdz file to download (im using the tool checking my imei to select correct one) but it takes ages with my internet.
Anyone has any ideas? Am i doomed?
Hi
Happened to me also. I got out of it by using LG flash tool and clicking on options and selecting restore recovery. It puts it back to stock and you then need to reroot etc.
Stransky
Sent from my Desire 816 using Tapatalk
Stransky said:
Hi
Happened to me also. I got out of it by using LG flash tool and clicking on options and selecting restore recovery. It puts it back to stock and you then need to reroot etc.
Stransky
Sent from my Desire 816 using Tapatalk
Click to expand...
Click to collapse
Options? On mainstream there isn't any. Is it on the 2nd screen after adding the kdz?
Current progress
Phone:
No download mode
No boot on the phone
Device acts dead - only visible on my pc (serial port LGE)
PID and IMEI not available to read using LG flash tool 2014
Tried
Loading KDZ file - connection failed
using tot and dll with flash tool - Failed to connect to device
Read something about laf.img using adb... Anyone has any other ideas? Funny enough when I was searching forums I was not able to find more info about cases when device is not waking up at all. but now i see few very similar threads around? Possible flaw somewhere?
Please take a SC of your device manager...
ScAvEnGeR(PHC) said:
Please take a SC of your device manager...
Click to expand...
Click to collapse
Here you go:
https://drive.google.com/folderview?id=0B-PcKi2bLtK_X2RyZGNxdXBHVnM&usp=sharing
thanks!
(actually android device is gone now from the list - it was visible when i was installing the drivers - strange?)
quintaar said:
Here you go:
https://drive.google.com/folderview?id=0B-PcKi2bLtK_X2RyZGNxdXBHVnM&usp=sharing
thanks!
(actually android device is gone now from the list - it was visible when i was installing the drivers - strange?)
Click to expand...
Click to collapse
Thank God it is showing a serial port, try flashing with LG tools 2014, let me find a fix for your download error...
EDIT: Is your phone by any chance plugged into a usb 3.0 port? If yes then please plug it in a usb 2.0 port and try again...
I hope you are right. Screens hots should be updated same link:
https://drive.google.com/folderview?...nM&usp=sharing
Laptop has no usb3.0 so im safe there. Tried 3 cables as well. Not sure what was it shown it was I think Android device but it is no longer there. Just the com port. Lge
@quintaar
Sorry my bad. I should have said LG Mobile support tool. If you have it click on the options and select Upgrade recovery.
Stransky
Sent from my LG-D855 using Tapatalk
Stransky said:
@quintaar
Sorry my bad. I should have said LG Mobile support tool. If you have it click on the options and select Upgrade recovery.
Stransky
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
It might be the PC (work pc at the moment and some IT limitations on it) however drivers installed ok, software confirms that I have latest software on my device - when phone is connected to the pc. After running Recovery Upgreade, it gets problem with comunication between the pc and mobile. in troubleshooting asks to power on the mobile (which I cannot do) before retrying. Also I have installed LG usb driver from outside as options coming with this software seem to be for really old models?
A thing I tried with another G3 was to connect the phone to the PC without the battery and then insert the battery, disconnect from phone and then remove battery again then insert and hold volume up and connect the USB to the phone again and it went into download mode and allowed the use of LG support tool as before.
Its worth a try!!
Stransky
Sent from my LG-V500 using Tapatalk
Stransky said:
A thing I tried with another G3 was to connect the phone to the PC without the battery and then insert the battery, disconnect from phone and then remove battery again then insert and hold volume up and connect the USB to the phone again and it went into download mode and allowed the use of LG support tool as before.
Its worth a try!!
Stransky
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
No dice... so far. I'm back home in 2 days when i can try all of this again making sure that PC is not restricted from any functionality... although it does sucks to not to have a phone until then. If you get any ideas I'm happy to try it as well.. as not like i have anything to lose at this point.
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.
Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.
mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.
Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?
Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
I rooted my friends htc desire 816g dual sim and got him cwm.
i flashed it with a programm on the pc (can't quite remember the name) after that it said ''boot in recovery mode?''
i pressed yes and it went into a bootloop,i was like ok fixable just go into fastboot and flash new rom right?
no it cannot go into bootloop or recovery and when it is connected to pc during this whole bootloop it shows me the cell phone with some drivers i installed with a yellow exclamation mark under it,also it doesn't stay connected for more than 3-5 seconds
thongdaddy said:
I rooted my friends htc desire 816g dual sim and got him cwm.
i flashed it with a programm on the pc (can't quite remember the name) after that it said ''boot in recovery mode?''
i pressed yes and it went into a bootloop,i was like ok fixable just go into fastboot and flash new rom right?
no it cannot go into bootloop or recovery and when it is connected to pc during this whole bootloop it shows me the cell phone with some drivers i installed with a yellow exclamation mark under it,also it doesn't stay connected for more than 3-5 seconds
Click to expand...
Click to collapse
Yeah the g is the Mediatek processor and needs to be flashed with flashtools and the phone off I believe. Not many custom roms for it either. So you think you flashed the wrong rom and did you use flashtools ? There's also a quad core version and octa core version that can't use each other's custom roms I believe. One is MT682 and the other is MT692 for octa core I believe.
thoctor said:
Yeah the g is the Mediatek processor and needs to be flashed with flashtools and the phone off I believe. Not many custom roms for it either. So you think you flashed the wrong rom and did you use flashtools ? There's also a quad core version and octa core version that can't use each other's custom roms I believe. One is MT682 and the other is MT692 for octa core I believe.
Click to expand...
Click to collapse
I didn't flash a rom I flashed cwm and It wasn't off indeed but I need help not to find the cause because I cannot get into any menus or get my pc to recognise it due to the minimum time it stays connected
thongdaddy said:
I didn't flash a rom I flashed cwm and It wasn't off indeed but I need help not to find the cause because I cannot get into any menus or get my pc to recognise it due to the minimum time it stays connected
Click to expand...
Click to collapse
Oh , yeah. My bad. I was tired last night and helping a few different people here and in other sites so the recovery flash slipped by me. Your going to have to get the phone powered down (either by you or by it draining down.)and use flashtools again I believe. Assuming that's what you used initially. XDA member Nukaru has helped people with Mediatek chipsets more than I have ( I have the a5_chl snapdragon) and I would recommend getting her help. I've never used flashtools with the Mediatek devices just ADB/fastboot with Qualcomm.
thoctor said:
Oh , yeah. My bad. I was tired last night and helping a few different people here and in other sites so the recovery flash slipped by me. Your going to have to get the phone powered down (either by you or by it draining down.)and use flashtools again I believe. Assuming that's what you used initially. XDA member Nukaru has helped people with Mediatek chipsets more than I have ( I have the a5_chl snapdragon) and I would recommend getting her help. I've never used flashtools with the Mediatek devices just ADB/fastboot with Qualcomm.
Click to expand...
Click to collapse
My computer cannot recognise it though because once I connect in it disconnects within seconds if I could do that I would have tried and the only reason I have hopes is because it turns on but not in android or any bootloader also my phone is discoverable by my pc only when it is in the state of turning on as soon as there is light on the screen it disconnects
thongdaddy said:
My computer cannot recognise it though because once I connect in it disconnects within seconds if I could do that I would have tried and the only reason I have hopes is because it turns on but not in android or any bootloader also my phone is discoverable by my pc only when it is in the state of turning on as soon as there is light on the screen it disconnects
Click to expand...
Click to collapse
I get all that . The phone won't enter recovery or bootloader or OS and keeps rebooting. I believe it's going to have to completely power down either by you or the phone itself then use flashtools. I provided a link to a flashtools forum for the HTC Mediatek devices. Yours is included. Also contact Nukaru as she has direct experience with the Mediatek chipset. The phone is going to have to run down basically so you don't get any reboots but like I said the Mediatek isn't my area of expertise. Follow my advice and you'll get it figured out. Good luck.
http://forum.xda-developers.com/android/general/htc-mtk-cpu-flash-files-flashtool-t3114271
thoctor said:
I get all that . The phone won't enter recovery or bootloader or OS and keeps rebooting. I believe it's going to have to completely power down either by you or the phone itself then use flashtools. I provided a link to a flashtools forum for the HTC Mediatek devices. Yours is included. Also contact Nukaru as she has direct experience with the Mediatek chipset. The phone is going to have to run down basically so you don't get any reboots but like I said the Mediatek isn't my area of expertise. Follow my advice and you'll get it figured out. Good luck.
http://forum.xda-developers.com/android/general/htc-mtk-cpu-flash-files-flashtool-t3114271
Click to expand...
Click to collapse
Sorry for replying again but just to make it clear I make the phone battery die so it doesn't reboot and I use the flash tools to flash a stock rom?
thongdaddy said:
Sorry for replying again but just to make it clear I make the phone battery die so it doesn't reboot and I use the flash tools to flash a stock rom?
Click to expand...
Click to collapse
Don't be sorry I'm happy to help. That's my understanding but bear in mind my knowledge with the Mediatek is really limited. I know you need flashtools and I'm pretty sure the device needs to be powered off. After that I'm kind of out of my area of expertise. Been told by Nukaru that the Mediatek is actually easier to flash/work with so that's good. Send her a PM and when she's not busy I'm sure she will try to help you here.
thoctor said:
Don't be sorry I'm happy to help. That's my understanding but bear in mind my knowledge with the Mediatek is really limited. I know you need flashtools and I'm pretty sure the device needs to be powered off. After that I'm kind of out of my area of expertise. Been told by Nukaru that the Mediatek is actually easier to flash/work with so that's good. Send her a PM and when she's not busy I'm sure she will try to help you here.
Click to expand...
Click to collapse
OK thank you for all your help
thongdaddy said:
Sorry for replying again but just to make it clear I make the phone battery die so it doesn't reboot and I use the flash tools to flash a stock rom?
Click to expand...
Click to collapse
Just popped in, I think I can help you.
SP Flashtool can detect the device even if it is on bootloop. On SP Flashtool just tick all items except preloader then click on download and connect the phone to the PC. If it still does not get recognized try holding the power button while you are connecting it to the PC to try and force it into the switched off state
The best way to flash RUU on a mediatek device is ALWAYS to remove the battery. Not removing the battery can brick your device!
To help I'll need more information about your device.
1. What RUU did you flash? European or Indian?
2. When and where was this phone bought, which region?
nukaru said:
The best way to flash RUU on a mediatek device is ALWAYS to remove the battery. Not removing the battery can brick your device!
To help I'll need more information about your device.
1. What RUU did you flash? European or Indian?
2. When and where was this phone bought, which region?
Click to expand...
Click to collapse
I flashed a clockwork mod it was European if that is ruu but I didn't flash a rom
the phone was bought about 1 year ago in Greece
Gibz97 said:
Just popped in, I think I can help you.
SP Flashtool can detect the device even if it is on bootloop. On SP Flashtool just tick all items except preloader then click on download and connect the phone to the PC. If it still does not get recognized try holding the power button while you are connecting it to the PC to try and force it into the switched off state
Click to expand...
Click to collapse
OK I will try that thanks
This (D816h) is the rom you'll need. Instructions are in the file description. If you're having trouble signing in, please contact me and I'll upload the file once I'm done with work.
And this is how to remove the battery.
nukaru said:
This (D816h) is the rom you'll need. Instructions are in the file description. If you're having trouble signing in, please contact me and I'll upload the file once I'm done with work.
And this is how to remove the battery.
Click to expand...
Click to collapse
it is stuck now because as soon as it connects it stays connected and it disconnects after a few seconds i also got an error about the usb port but i uninstalled the i guess false drivers i had installed by myself any other ideas?
Have you tried a different driver for your USB Port? Or connecting the device to another USB Port?
Flashtools won't disconnect, if the battery is removed, that's why it's always the safest bet to remove the battery.
nukaru said:
Have you tried a different driver for your USB Port? Or connecting the device to another USB Port?
Flashtools won't disconnect, if the battery is removed, that's why it's always the safest bet to remove the battery.
Click to expand...
Click to collapse
It still doesn't flash it it stays there at 0b/s maybe different settings?the options not quite like you told me it is a different version I guess
thongdaddy said:
It still doesn't flash it it stays there at 0b/s maybe different settings?the options not quite like you told me it is a different version I guess
Click to expand...
Click to collapse
What is your device model?
It is usually shown at the back bottom of the phone. It is usually something like 0PGZ100, 0PJ120... etc
thongdaddy said:
It still doesn't flash it it stays there at 0b/s maybe different settings?the options not quite like you told me it is a different version I guess
Click to expand...
Click to collapse
What error message do you get? Is there an error message?
Some versions of flashtool are problematic with Desire 816, which version did you install?
nukaru said:
What error message do you get? Is there an error message?
Some versions of flashtool are problematic with Desire 816, which version did you install?
Click to expand...
Click to collapse
It is 5. Something should I search some else version?
I flashed MIUI 8 rom today as a secondary rom on multi rom and now my device doesnt boot and the screen doesnt turn on even when i connect it to a charger and also the device is not detected by my computer .. what should i do ?
Any sign of life when vol + & power pressed together?
Mega unbrick guide. You can find it in the same thread
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
passion8059 said:
Any sign of life when vol + & power pressed together?
Click to expand...
Click to collapse
No sign of life ... its totally dead .. the screen doesnt even turn on even when i press vol + and power .. nor it turn on when i connect it to the charger
Have you tried the unbrick guide?
Sent from my OnePlus 3 using Tapatalk
Omair555 said:
I flashed MIUI 8 rom today as a secondary rom on multi rom and now my device doesnt boot and the screen doesnt turn on even when i connect it to a charger and also the device is not detected by my computer .. what should i do ?
Click to expand...
Click to collapse
Completely power of the device by pressing the power button for 40 seconds. Then press volume up for ten seconds and while pressing connect to the computer. If the device is detected by the computer then try the first method of mega unbrick guide. Best of luck.
Thanks my device is back to life
Mega unbrick miracle
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Reading this post was more oppressive than a Alfred Hitchcock movie's...
Omair555 said:
Thanks my device is back to life
Click to expand...
Click to collapse
What did you do to have it turn on again?
bltclem said:
What did you do to have it turn on again?
Click to expand...
Click to collapse
Used the mega unbrick guide
OnePlus never dies! He kills flagships.
Its fully unbrickable, screwed phone up lots off times experimenting with things and have always got phone back again.
Same! i got mine yesterday off swappa, original owner fked it all up by unrooting, flashing stock recovery and rom, and never took off the pin to decrypt the storage on twrp so i screwed the storage with resetting the userdata.img and it only showed 16gb out of 64 so i used the mega unbrick guide and now im back in buisness
Sent from my aicp_oneplus3 using Tapatalk