Develop Bugs

[Q] Status 7 Error?

I know this has been asked hundreds of times, and i searched the forums for days for a way to fix it, but with no use.
I have a rooted AT&T Galaxy SIII with JB 4.1.1. I am trying to install the CM 10.1(4.2.2) Nightly version, but i always get the infamous "Status 7 Installation Aborted" error.
Yes i am sure im downloading the correct ROM zip file for my phone and carrier.
I have CWM 6.0.2.1, and i followed the steps correctly. (Clear data -> Clear Cache Partition -> Clear Dalvik Cache -> install ROM)
I have tried so many times, i also re-rooted my phone, reinstalled CWM, and redownloaded different nightly versions of the ROM, as well as other ROMS like JellyBam.
I also tried to delete the assert lines in the update-script file, but that also wouldnt work.
Thank you. :good:
And please dont hate on me, im new to rooting and flashing. :crying:

Improper recovery.

samelaryan said:
I know this has been asked hundreds of times, and i searched the forums for days for a way to fix it, but with no use.
I have a rooted AT&T Galaxy SIII with JB 4.1.1. I am trying to install the CM 10.1(4.2.2) Nightly version, but i always get the infamous "Status 7 Installation Aborted" error.
Yes i am sure im downloading the correct ROM zip file for my phone and carrier.
I have CWM 6.0.2.1, and i followed the steps correctly. (Clear data -> Clear Cache Partition -> Clear Dalvik Cache -> install ROM)
I have tried so many times, i also re-rooted my phone, reinstalled CWM, and redownloaded different nightly versions of the ROM, as well as other ROMS like JellyBam.
I also tried to delete the assert lines in the update-script file, but that also wouldnt work.
Thank you. :good:
And please dont hate on me, im new to rooting and flashing. :crying:
Click to expand...
Click to collapse
BAM1789 said:
Improper recovery.
Click to expand...
Click to collapse
if you can boot into the phone, download ROM manager and update your cwm recovery. latest version is 6.0.2.8.
CM10 and 10.1 are picky about you having the most recent version. cheers

xBeerdroiDx said:
if you can boot into the phone, download ROM manager and update your cwm recovery. latest version is 6.0.2.8.
CM10 and 10.1 are picky about you having the most recent version. cheers
Click to expand...
Click to collapse
I did that and it worked thank you :good:

samelaryan said:
I did that and it worked thank you :good:
Click to expand...
Click to collapse
thats what we're all here for, buddy

Status 7: installation aborted.
xBeerdroiDx said:
thats what we're all here for, buddy
Click to expand...
Click to collapse
Hi guys, I'm having same issue but on N7000 international version. I'm able to go in the recovery mode and download mode but phone won't boot normally. It's stuck on Samsung logo so can you please advise something? How can I update CWM if that's the issue. I was on ICS 4.0.4 XXLRK before trying to install CM10.1 on Note.
Thanks in advance for your help.

perceptorz said:
Hi guys, I'm having same issue but on N7000 international version. I'm able to go in the recovery mode and download mode but phone won't boot normally. It's stuck on Samsung logo so can you please advise something? How can I update CWM if that's the issue. I was on ICS 4.0.4 XXLRK before trying to install CM10.1 on Note.
Thanks in advance for your help.
Click to expand...
Click to collapse
I would be doing my research in an N7000 forum, friend.
Also, your post seems confusing as you seem to be saying you also got a status 7 error but then you appear to have installed abroad and are stuck at the boot logo. If you successfully flashed the correct rom for your device without any errors, pull battery, replace and wipe data in recovery. Reboot

xBeerdroiDx said:
I would be doing my research in an N7000 forum, friend.
Also, your post seems confusing as you seem to be saying you also got a status 7 error but then you appear to have installed abroad and are stuck at the boot logo. If you successfully flashed the correct rom for your device without any errors, pull battery, replace and wipe data in recovery. Reboot
Click to expand...
Click to collapse
Apologies for both confusion and using the S3 that to find some help. I just found the situation quite familiar so I couldn't help myself from asking the question
On the situation, I was able to install CWM and am able to go to recovery or download mode but the error displays when I try to update the zip of any rom.

perceptorz said:
Apologies for both confusion and using the S3 that to find some help. I just found the situation quite familiar so I couldn't help myself from asking the question
On the situation, I was able to install CWM and am able to go to recovery or download mode but the error displays when I try to update the zip of any rom.
Click to expand...
Click to collapse
If the phone itself is functioning fine but you simply cannot flash a new rom or rom update, you need to update your recovery. Go to clockworkmods website and download version 6.0.1.2.

xBeerdroiDx said:
If the phone itself is functioning fine but you simply cannot flash a new rom or rom update, you need to update your recovery. Go to clockworkmods website and download version 6.0.1.2.
Click to expand...
Click to collapse
Right now, phone doesn't get pass Samsung boot logo so will I be able to update new CWM using Odin? (Sorry, if the question appears to be basic or stupid)

perceptorz said:
Right now, phone doesn't get pass Samsung boot logo so will I be able to update new CWM using Odin? (Sorry, if the question appears to be basic or stupid)
Click to expand...
Click to collapse
I would take up this situation in the correct forum. The more we discuss your device issues the more likey you are to download the wrong file or use a procedure not designed for your device software.
If you came from stock, flashed a rom and are stuck at the samsung logo, boot into recovery, wipe data and cache. Reboot to see if that helped. If not, seek advice in the N7000 forum. Cheers

Thanks for the guidance.

[Q] TWRP unable to find partition size for

Hello Everybody,
i am using this rom 4.3 from a while ago and i wanted to change it to the 4.4 rom
i decided to flash Omni 4.4.2 new rom from this url
http://forum.xda-developers.com/showthread.php?t=2487526
As per the installation instructions i went to download TWRP ver. 2.6.3.1 from here
http://techerrata.com/browse/twrp2/t03g
and i installed it through Odin, and when i tried flashing the rom through TWRP it says successful when i do factory reset and when i try to format data it says failed and when i try to flash the rom it says failed
it keep saying
e:/ unable to find partition size for "/data"
am not developer or expert, but i used to flash many roms for all my past android devices and this is my first time to see such error
well, the device still working when i exit TWRP and do system reboot my rom boot up normally and the device is perfectly working on my phonix 4.3 rom
but i noticed that Odin can not detect my device on the downloading mode anymore but it still can detect it if the device is turned on
So, could you guys advise about what exactly i had missed or damaged here? can i flash other roms? or recovery?
please give me some help here in deep details as am really new to such errors
Thanks a lot in advance and Happy New year for everybody

hey guys, any updates?

I m having the same problem, ay solution?

Mee too: http://forum.xda-developers.com/showpost.php?p=69313945&postcount=45

Mohamedloza said:
hey guys, any updates?
Click to expand...
Click to collapse
Jotapoggi said:
I m having the same problem, ay solution?
Click to expand...
Click to collapse
You still have the problem?
Sent from my Xiaomi Mi 5 using XDA Labs

[Guidance] SGH-T989 UPDATING ISSUE!

Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.

Did you follow the instructions to flash TWRP using Odin?

olafo73 said:
Did you follow the instructions to flash TWRP using Odin?
Click to expand...
Click to collapse
I'm pretty sure I did everything I was intended to do. I installed Samsung Kies so I could install the drivers on my mobile, and then TWRP through Odin properly with the blue light showing up. After flashing it, it turned green and said PASS or PASSED. So I think I did everything right on that end, I can even access TWRP with no real problems.
I even tried to do a ROOT on my system, but again, I couldn't use ZIP or any other files on the TWRP installation option because they simply do not appear

bump

Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1

aguycalled80 said:
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
Click to expand...
Click to collapse
How did you go back to TWRP 2.6.0?

N1ZUW said:
How did you go back to TWRP 2.6.0?
Click to expand...
Click to collapse
With Odin.
I can boot in download mode no problem.

N1ZUW said:
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Click to expand...
Click to collapse
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.

markusrow said:
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
Click to expand...
Click to collapse
Hi, thanks for replying
No, I dont' take I have taken that step actually. I'm pretty new to this and I tried following every step correctly, but I know that I failed or skipped something at some extent and I've been trying to figure out what exactly, so I can fix it. I guess I need to Virtual Partition my phone then, could you post me the link do to so? Because I think you posted one that would take back to this post

aguycalled80 said:
With Odin.
I can boot in download mode no problem.
Click to expand...
Click to collapse
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!

N1ZUW said:
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
Click to expand...
Click to collapse
I shut it down in TWRP then hold volume down and power to go into download mode.
My phone has gone backwards now though - it doesn't matter what I load in Odin now, it won't boot up. The SAMSUNG screen is on, with a progress bar, but it never gets to the end. It stops right near the end and it sits there until I reboot it again.

OP3 - Nethunter - "Unpacking boot image failed"

Hi there,
I wanted to install the latest image of Nethunter (found on build.nethunter.com/nightly) but when I install it with TWRP I keep getting the message : "Unpacking boot image failed" in the log screen.
What I did in order:
- Unlock fastboot mode
- Flash TWRP recovery (found on build.nethunter.com/twrp)
- Reboot on TWRP
- Install kernel ( kernel-nethunter-oneplus3-nougat-3.15.4-20170126-2226 )
- Install ROM ( nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604 )
- Reboot
It is when I install the rom that I get the error message "Unpacking boot image failed". Even if at the end it says "install completed - Success", it keep loading (with the nethunter loading screen) indefinitely...
I tried many differents versions of TWRP and even different builds of Nethunter, I found nothing on the net, so what should I do ?
Should I post an issue on the kali-nethunter github ?
Hope you have some ideas of what I can try...
However if you need any other information (log file ...), tell me what.

Aiscargeauh said:
Hi there,
I wanted to install the last image of Nethunter (found on build.nethunter.com/nightly) but when I install it with TWRP (found on build.nethunter.com/twrp) I keep getting the message : "Unpacking boot image failed" in the log screen.
I tried many differents versions of TWRP and even different builds of Nethunter, I found nothing on the net, so what should I do ?
Should I post an issue on the kali-nethunter github ?
Hope you have some ideas of what I can try...
However if you need any other information (log file ...), tell me what.
Click to expand...
Click to collapse
What ROM are you using?
Last time i installed it i was on OOS 3.2.2. You have to flash kernel and then the big file (generic nethunter.....)
Found that in https://forum.xda-developers.com/showpost.php?p=68451978&postcount=6
It worked perfectly but since 3.2.2 i havent touched it again so not sure what rom is compatible atm

fuarkgl3 said:
What ROM are you using?
Click to expand...
Click to collapse
I'm trying with the "nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604.zip"
Also tried with the full version, instead of minimal but same result.

Aiscargeauh said:
I'm trying with the "nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604.zip"
Also tried with the full version, instead of minimal but same result.
Click to expand...
Click to collapse
I mean version of OOS, not nethunter overlay. See my screenshot. You have to download one of the following kernels depending if you are on MM or nougat. Flash it before flashing the nethunter overlay

fuarkgl3 said:
I mean version of OOS, not nethunter overlay
Click to expand...
Click to collapse
I'm trying with the latest OTA version, so actually the 4.0.2.
I also installed the kernel before, I'm gonna edit my first post with informations on what I did.

Aiscargeauh said:
I'm trying with the latest OTA version, so actually the 4.0.2.
I also installed the kernel before, I'm gonna edit my first post with informations on what I did.
Click to expand...
Click to collapse
Ok i just read it. And it seems strange indeed. Will try to install it today since i use also oos 4.0.2 and will report back asap
Just out of curiosity what twrp are you using?

fuarkgl3 said:
Ok i just read it. And it seems strange indeed. Will try to install it today since i use also oos 4.0.2 and will report back asap
Just out of curiosity what twrp are you using?
Click to expand...
Click to collapse
Thank's for the support anyway
I'm using the TWRP provided by Nethunter on build.nethunter.com/twrp/oneplus/
Also tried with official 3.0.3 for the OnePlus 3 from twrp.me/devices/oneplusthree.html

Aiscargeauh said:
Thank's for the support anyway
I'm using the TWRP provided by Nethunter on build.nethunter.com/twrp/oneplus/
Also tried with official 3.0.3 for the OnePlus 3 from twrp.me/devices/oneplusthree.html
Click to expand...
Click to collapse
Got it working. Only problem is i dont find the option to enable OTG-USB lol

fuarkgl3 said:
Got it working. Only problem is i dont find the option to enable OTG-USB lol
Click to expand...
Click to collapse
And I'm here sitting with my error and my infinite boot, lol.
Can you please put the installation process you did ? With the files you used ?
I'm getting my phone to full-stock.

Aiscargeauh said:
Can you please put the installation process you did ? With the files you used ?
I'm getting my phone to full-stock.
Click to expand...
Click to collapse
Sure. Just give me time to post what i did, currently restoring my nandroid because something went wrong when updating metapackages, so im going to download full version instead of minimal and enable OGT-USB to check if wifite works. I will post the steps asap :good:
meanwhile..... how the **** do i enable usb-otg? i dont find the option in settings/storage/3dot
Good and bad news: OTG does not work (it worked for me on MM) but nethunter runs "well" ... it stucks while rebooting and some weird things more. It runs laggy as well...
Steps and config i have
-Experience ROM v10.1(oos 4.0.2 with some adds) and custom TWRP by blu_spark v14
1-Download these 2 files from https://build.nethunter.com/nightly/3.15.4-20170202-1604/
-kernel-nethunter-oneplus3-nougat-3.15.4-20170202-1604.zip
-nethunter-generic-arm64-kalifs-full-rolling-3.15.4-20170202-1604.zip
2-Reboot to recovery and install nethunter-generic-arm64.....
3-Not sure if you have to reboot and then install kernel but i flashed nethunter+kernel without rebooting to system
4-Reboot to system and open supersu, then open nethunter app and grant superuser permissions
5-Done.
I Dont really know why my external adapter or pendrive are not recognized, because it did in MM with same hardware lol. Maybe now only works with official usb-c adapter, who knows

I will try this when I can, but it is close to what I already did.
I will edit this post when done.
I seen that you used the arm64 version, perhaps the problem is that I use the armhf ?

Aiscargeauh said:
I will try this when I can, but it is close to what I already did.
I will edit this post when done.
I seen that you used the arm64 version, perhaps the problem is that I use the armhf ?
Click to expand...
Click to collapse
may be, but im not sure. Finally got USB-OTG working but it runs very laggy and dont find any network. So problem is nh build or oos 4.0.2

fuarkgl3 said:
may be, but im not sure. Finally got USB-OTG working but it runs very laggy and dont find any network. So problem is nh build or oos 4.0.2
Click to expand...
Click to collapse
Do you think flashing another ROM before flashing nh-generic will help ?

Aiscargeauh said:
Do you think flashing another ROM before flashing nh-generic will help ?
Click to expand...
Click to collapse
Dont think so. But latest build i installed NH i didnt use arm64 version but armhf. So maybe try what i did but using custom TWRP by blu_spark v14 and armhf.... im not sure
Tested with 2 antennas and result is the same in both (see SS)

Update error 7 during flashing of lineageos 14.1 nightly from february with twrp.

First experience with error 7:
I had cm13 installed on my asus zenfone 2, when i heard that lineageos replaced cyanogenmod i wanted to replace it with lineageos asap!So when the unofficial build was released, i made a backup of my apps with titanium back-up and CLEAN flashed the Unofficial lineagos nightly from 26-12-2016, then i saw the horror: ERROR 7! I was searching on google and youtube how to fix it, i could only find a way to bypass it.
You can delete the assert code from the "update-script" file to make i work. When i did that, i could flash the Unofficial lineagos nightly from 26-12-2016. After that i updated the bootloader with the newest version that existed on that day and then i could boot and i was happy.
Current state of my phone 9-2-2016:
Rom = Unofficial lineagos nightly from 26-12-2016.
I updated the bootloader, ifwi and the recovery with the upgrade file from the user jrior001 via this link: http://theflamingskull.com/zenfone2.html. Under the section: MM BOOTLOADER/FIRMWARE. I have manualy flashed twrp version: 3.0.3.1 (Thanks @Sayeed99), I have flashed the latest nightly from download.lineageos.org.
And i still get the error 7, after the error i erased all the assert codes from the "update-script" file and i still have error 7 with the extra message that you can't dirty flash the nightly from February on top of the actual rom because it is incompatible data. The only way to bypass it again, is by clean flashing the newest build by deleting the assert codes again. But clean flashing everytime gets annoying (thank god that titanium backup exists, i want to do it the usual way without error 7.
Can someone help me?

What do you want to do now , go back to stock M and try again ?

So.... I am ashamed of my self saying this but.
I managed to flash the newest nightly, the first time i had error 7 was because of a old bootloader, ifwi and twrp. I flashed everything from the flamingskull dudes website, and did a clean flash. Clean flash means that you delete every partition besides misc and external sd, after the delete of every partition you flash the nightly via twrp.
I will donate some money to the flamingskull dude for helping me with a problem he shouldn't have to.
Maybe i will make a youtube tutorial video for this thread, i will keep helping people on this thread because i feel guilty for not trying to clean install.
For the people that are stuck in twrp or anything else i guess you should follow the bricked device guide: https://forum.xda-developers.com/zen...t3452785/page1
And for people with update process error 7, i have made a thread about this problem and will make a youtube video for it, this is the link for the thread:
https://forum.xda-developers.com/zen...-14-1-t3553715
Please keep this thread about bugs and problems about the rom and flashing the rom.
Sorry flamingskull dude...

The video will come, i only need time for it.

Same Issue!!
I'm having the same problem I spent 2 days already working out on this issue now I reverted to lollipop stock ROM. Please help me with this. I tried to flash lineage-14.1-20170208-nightly-Z00L-signed.zip with latest TWRP version but getting error 7 every time. I updated the ''updater-script", proceeds well but after rebooting phone goes to Fasboot mode directly.
Help ME!!!

surajjadhav said:
I'm having the same problem I spent 2 days already working out on this issue now I reverted to lollipop stock ROM. Please help me with this. I tried to flash lineage-14.1-20170208-nightly-Z00L-signed.zip with latest TWRP version but getting error 7 every time. I updated the ''updater-script", proceeds well but after rebooting phone goes to Fasboot mode directly.
Help ME!!!
Click to expand...
Click to collapse
Z00L?

Download every file from theflaminskull.com website under the section MM bootloader. Use the upgrade.bat file to upgrade everything from your phone.
After that clean flash ( delete every partition except external sd) the newest nightly from https://download.lineageos.org/Z00A, make sure you use the newest twrp version: 3.0.3 from say99. It is included in the upgrade.bat file. You can also manually flash it if the upgrade.bat file did not work.
Make backups with twrp or titanium backup to restore your missing apps on the new clean rom or revert back to the old state of the phone.
This worked for everyone, no discussion. If you experience problems during the process you must restart all devices in the process and try again. Or you must follow the unbrick guide for Z00A.
Good luck.

On 551 0r Z00A To prevent, ever to having this error in the beginning .
Reboot to bootloader -- Check IFWI version number >
0094.0173 is unlocked LP bootloader
0094.0177 is Locked LP bootloader
0094.0183 is M bootloader
There are many ways to upgrade bootloader , one is Jasons via the files pijetri links above Or you can if still on LP versions -- flash back stock recovery for .184 LP upwards--adb sideload .184 stock or upwards to .198 -- set up then upgrade to M -- Then use the Modder tools to unlock bootloader flash TWRP and root and more importantly back-up stock M rom before flashing away to your hearts content

EDIT: Fixed... messed up a little bit, but still got a tiny problem:
Every time I boot I get this message with a red triangle saying that my device couldn't be verified or something like this and a link to some site. Any way to fix this?
https://support.google.com/nexus/an...6407473287604-1344347192&p=verified_boot&rd=1

firecharge said:
EDIT: Fixed... messed up a little bit, but still got a tiny problem:
Every time I boot I get this message with a red triangle saying that my device couldn't be verified or something like this and a link to some site. Any way to fix this?
https://support.google.com/nexus/an...6407473287604-1344347192&p=verified_boot&rd=1
Click to expand...
Click to collapse
Thats normal if unlocked bootloader in M ,nice to see you upgraded already :good:

pijetri said:
So.... I am ashamed of my self saying this but.
I managed to flash the newest nightly, the first time i had error 7 was because of a old bootloader, ifwi and twrp. I flashed everything from the flamingskull dudes website, and did a clean flash. Clean flash means that you delete every partition besides misc and external sd, after the delete of every partition you flash the nightly via twrp.
I will donate some money to the flamingskull dude for helping me with a problem he shouldn't have to.
Maybe i will make a youtube tutorial video for this thread, i will keep helping people on this thread because i feel guilty for not trying to clean install.
For the people that are stuck in twrp or anything else i guess you should follow the bricked device guide: https://forum.xda-developers.com/zen...t3452785/page1
And for people with update process error 7, i have made a thread about this problem and will make a youtube video for it, this is the link for the thread:
https://forum.xda-developers.com/zen...-14-1-t3553715
Please keep this thread about bugs and problems about the rom and flashing the rom.
Sorry flamingskull dude...
Click to expand...
Click to collapse
Thank you man, I was with this error, but with your help I got instaled Lineage Os 14.1.
Can I make a video in portuguese with yours instructions???????

pijetri said:
So.... I am ashamed of my self saying this but.
I managed to flash the newest nightly, the first time i had error 7 was because of a old bootloader, ifwi and twrp. I flashed everything from the flamingskull dudes website, and did a clean flash. Clean flash means that you delete every partition besides misc and external sd, after the delete of every partition you flash the nightly via twrp.
I will donate some money to the flamingskull dude for helping me with a problem he shouldn't have to.
Maybe i will make a youtube tutorial video for this thread, i will keep helping people on this thread because i feel guilty for not trying to clean install.
For the people that are stuck in twrp or anything else i guess you should follow the bricked device guide: https://forum.xda-developers.com/zen...t3452785/page1
And for people with update process error 7, i have made a thread about this problem and will make a youtube video for it, this is the link for the thread:
https://forum.xda-developers.com/zen...-14-1-t3553715
Please keep this thread about bugs and problems about the rom and flashing the rom.
Sorry flamingskull dude...
Click to expand...
Click to collapse
@pijetri The links are broken in your post. Can you share them with me, please? If you have video would be also great
Let me give some details about my device to help me here... thanks in advance:
Zenfone 2 ASUS_Z00A
IFWI VERSION: 0094.0173
Before wiping everything it was running the Stock ROM with Lollipop Android 5
Current status of the machine, no stock ROM anymore. I can boot into bootloader and TWRP recovery 3.0.2-0
Please correct me if there is something i should be doing in a different way. Thanks in advance.