Hi,
i have a Mi Max 32GB and flashed TWRP without unlocking (with the method here http://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594) and installed MIUI 8 rooted.
Now i have to send it back for repair and i want to get back to stock (at least miui 8 unrooted with original recovery).
Can you help me how to do it?
I would try to flash unrooted miui 8 and the stock recovery with Mi Beta Flasher after it but where can i get the stock recovery?
Thanks
Daniel
Dacoco said:
Hi,
i have a Mi Max 32GB and flashed TWRP without unlocking (with the method here http://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594) and installed MIUI 8 rooted.
Now i have to send it back for repair and i want to get back to stock (at least miui 8 unrooted with original recovery).
Can you help me how to do it?
I would try to flash unrooted miui 8 and the stock recovery with Mi Beta Flasher after it but where can i get the stock recovery?
Thanks
Daniel
Click to expand...
Click to collapse
I think if you use MiFlash it will flash back everything including the stock recovery.
Will this work even if the phone is NOT unlocked? Where can i get the correct image? Which one do i need? And can i flash MIUI 7 too?
Yea... that was a great idea... i think it is bricked now
Started MiFlash Beta (which worked perfectly to install twrp a couple of weeks ago). Now i flashed the hydrogen_global_images_V8.0.2.0.MBCMIDG_20150805.0000.29_6.0._global_faa8bcca0e Fastboot ROM and after 94 seconds there was an error -translated - "For this command is not enough memory available.(0x800700008: Max buffer sector is 256)". After trying again i only get "critical error (0x8000ffff: Receiving hello packet). Also flashing twrp again does not work. When i turn on the phone i only see a symbol with a mi phone with a cable plugged in ...
Dacoco said:
Yea... that was a great idea... i think it is bricked now
Started MiFlash Beta (which worked perfectly to install twrp a couple of weeks ago). Now i flashed the hydrogen_global_images_V8.0.2.0.MBCMIDG_20150805.0000.29_6.0._global_faa8bcca0e Fastboot ROM and after 94 seconds there was an error -translated - "For this command is not enough memory available.(0x800700008: Max buffer sector is 256)". After trying again i only get "critical error (0x8000ffff: Receiving hello packet). Also flashing twrp again does not work. When i turn on the phone i only see a symbol with a mi phone with a cable plugged in ...
Click to expand...
Click to collapse
If you see the Mi logo then you aren't bricked. Try flashing it again. If it doesn't work then try the Chinese version of the fastboot rom to get to stock then give the global rom a try again.
ajsmsg78 said:
If you see the Mi logo then you aren't bricked. Try flashing it again. If it doesn't work then try the Chinese version of the fastboot rom to get to stock then give the global rom a try again.
Click to expand...
Click to collapse
Just tried it and got exactly the same error
I could manage to reboot and go to miflashmode again and flash TWRP again. When i now install a MIUI 8 Global ROM it won't start but a MIUI 7 ROM booted. Unfortunately without any radio functions and with crashes. I think the radio partition is broken.
Dacoco said:
Just tried it and got exactly the same error
I could manage to reboot and go to miflashmode again and flash TWRP again. When i now install a MIUI 8 Global ROM it won't start but a MIUI 7 ROM booted. Unfortunately without any radio functions and with crashes. I think the radio partition is broken.
Click to expand...
Click to collapse
I can make you a flashable zip with the radios that you need that you can flash in TWRP. Try flashing the regular stock rom in TWRP.
This is all really crazy
After flashing a MIUI 8 Global ROM in TWRP the phone doesn't boot. After then installing an older MIUI 7 than before everything worked including radios. At the moment i'm trying to restore a MIUI 8 Backup which worked and delete data and cache to be kind of stock.
But nevertheless - how to flash stock recovery when i'm finished? I tried to flash via fastboot but this is not allowed due to the locked bootloader.
,
Hi!
I bricked my yureka plus by accidentally flashing old yureka plus yu5510a (CM variant)'s ROM using YGDP tool, it didnt flash at all.. showed error at 1%.
This variant of Yureka has different fastboot than others.
I cant find stock rom for this variant.
Now it doesnt boot and shows Nothing but text "Download Failed Images - aboot"
Please help!!
PastVision;7138145https://androidmtk.com/download-yu-stock-rom-for-all-models6 said:
Hi!
I bricked my yureka plus by accidentally flashing old yureka plus yu5510a (CM variant)'s ROM using YGDP tool, it didnt flash at all.. showed error at 1%.
This variant of Yureka has different fastboot than others.
I cant find stock rom for this variant.
Now it doesnt boot and shows Nothing but text "Download Failed Images - aboot"
Please help!!
Click to expand...
Click to collapse
Here u will get the stock rom for yureka :good:
https://androidmtk.com/download-yu-stock-rom-for-all-models
Need help with soft Bricked YurekaPlus YU5510A stock android lollipop veriant
What a solution for that? Am trying to stock rom flashing for this device (YU5510A)-yureka plus android- varient i also face this problem on flashing eror:: "Download Failed Images - aboot"
Please help!!
vin982233 said:
What a solution for that? Am trying to stock rom flashing for this device (YU5510A)-yureka plus android- varient i also face this problem on flashing eror:: "Download Failed Images - aboot"
Please help!!
Click to expand...
Click to collapse
Hey dude,
You'll not get YU5510A stock android lollipop variant anywhere. Coz it does not run on CM. Its based on YU's OEM ROM.
But luckily since its just s soft brick, You have 2 options Root and flash CM 12.1 ROM or If you want Flash the latest 14.1 Lineage OS.
DO not flash the 12.1 COS fastboot for Yureka, else you'll get into trouble.
vin982233 said:
What a solution for that? Am trying to stock rom flashing for this device (YU5510A)-yureka plus android- varient i also face this problem on flashing eror:: "Download Failed Images - aboot"
Please help!!
Click to expand...
Click to collapse
1.Download the LOLLIPOP factory image fastboot package for YU YUREKA from Here
2.Extract the contents of the fastboot package into a folder.
3.Download this flashing tools package
4.Extract the contents of the flashing tools zip into the same folder
5.To make sure, check that system.img, boot.img etc files are in the same folder as flash-all.bat, fastboot.exe etc
6.Connect your phone in fastboot mode, steps for which are : -
a. Power off your phone
b. Press and hold the Volume Up key
c. With the Volume Up key, connect the phone to your PC/Laptop with USB cable
d. You can let go off the Volume Up key when Fastboot Mode is displayed on the screen
7.Run flash-all.bat by double clicking on it.
8.A command window will open and flashing procedure will start
9.DO NOT disconnect the device during flashing procedure
10.The command window will close after the flashing process is over.
11.Disconnect the USB cable, and boot the phone normally by long pressing the Power button.
For links email me [email protected]
PastVision said:
Hi!
I bricked my yureka plus by accidentally flashing old yureka plus yu5510a (CM variant)'s ROM using YGDP tool, it didnt flash at all.. showed error at 1%.
This variant of Yureka has different fastboot than others.
I cant find stock rom for this variant.
Now it doesnt boot and shows Nothing but text "Download Failed Images - aboot"
Please help!!
Click to expand...
Click to collapse
Download ygdp version 3.98 from ygdp site
Select config tab
Select CBP file from firmware folder (www.firmwarefile.com)
Attach mobile in fastboot ( Volume + & hold then attach data cable with PC
Now press start
Wait until 100%
Then press stop
Your device will be unbrick
My Yureka plus on android yu5510a(stock android phone) hard bricked...
My YU5510A stock android hard bricked i have stock rom and everything but my yureka plus is not getting detected by my laptop(I am thinking qhusb bulk driver,qhusb qdloader 9008 and 9006 mode drivers is needed but i don't have that please reply the files link in reply). I have also tried shorting pins method but it didn't work for me. Please help me out...
Kumar Harshdeep said:
My YU5510A stock android hard bricked i have stock rom and everything but my yureka plus is not getting detected by my laptop(I am thinking qhusb bulk driver,qhusb qdloader 9008 and 9006 mode drivers is needed but i don't have that please reply the files link in reply). I have also tried shorting pins method but it didn't work for me. Please help me out...
Click to expand...
Click to collapse
http://www.mediafire.com/file/8g9v5fsslnbf1r6/Qualcomm+Driver+Setup.zip
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
Good luck
I have also a similar case. I tried to flash with YGDB tool, but it did not flash. It stops after 1%. The phone displays "download failed images -aboot". The phone model is Yureka Plus Yu5510a p0. Does this mean the phone is hardbricked?
Help please!
wawnature said:
I have also a similar case. I tried to flash with YGDB tool, but it did not flash. It stops after 1%. The phone displays "download failed images -aboot". The phone model is Yureka Plus Yu5510a p0. Does this mean the phone is hardbricked?
Help please!
Click to expand...
Click to collapse
Try to flash TWRP using fastboot
If it flashed successfully then your problem got resolved.
It shows aboot failed may be there is problem with CBP file.
Try to flash other CBP file ( try 1st version)
If not solved
Go-to yuplaydev and download latest fastboot package and flash using fastboot
Follow given steps in official site.
Good luck
Same problem as above
I tried to flash stock rom on yu5510 bt unknowingly i did yu5510a with YGDP Tool in doing show it shown error on 2% & it changed my recovery from TWRP to yu5510a recovery , and fastboot . and it locked bootloader too now i cant unlock bootloader and cant install any rom .
Pls help is there any option to revert back to yu5510 bootloader
Pls help
Thanks
Swetankanand said:
Same problem as above
I tried to flash stock rom on yu5510 bt unknowingly i did yu5510a with YGDP Tool in doing show it shown error on 2% & it changed my recovery from TWRP to yu5510a recovery , and fastboot . and it locked bootloader too now i cant unlock bootloader and cant install any rom .
Pls help is there any option to revert back to yu5510 bootloader
Pls help
Thanks
Click to expand...
Click to collapse
Flash original stock firmware
Find it at www.firmwarefile.com
Choose actual model
Install first version.
Check ygdp tool version also 3.98 is working perfectly.
All other versions creates bugs, hangs in between or flash failed etc.
Cross check it
Hello ..... I updated my twrp recovery and flash it using official twrp app after that i opened my recovery and it went to fastboot and when ever i switched it on it open fastboot mode and my android debugging is also off ..plz guys hepls me how can i open my phone back
sibghatkhan said:
Hello ..... I updated my twrp recovery and flash it using official twrp app after that i opened my recovery and it went to fastboot and when ever i switched it on it open fastboot mode and my android debugging is also off ..plz guys hepls me how can i open my phone back
Click to expand...
Click to collapse
Download older version ( previous using)
Flash through fastboot and boot into recovery using fastboot
yu 5510a all problem solve
change your yu5510a battery and flash with ygdp tool 100% tested
Hello everyone !
I have a xiaomi Mi A2 lite for few days, based on Pie 9.0. I decided to install a custom rom on it (resurrection or lineage OS16) so I unlocked the bootloader, rooted properly the phone, and then tryed to use TWRP to install a new ROM.
Unfortunatly, I never succeeded to do so: each time I tried, the installation failed, showing an "error 1".
Trying to fix this issue, I unfortunatly deleted the OS of my phone, and still can't install a new ROM. I tried to flash a stock ROM from xiaomi site, following this thread: https://forum.xda-developers.com/mi-a2-lite/help/os-image-please-help-t3885625/page3 , but Mi flash tool doesn't work well on my computer (it's still showing an "unhandled exception" error, whatever I'm trying to do.
Here we are, I've got two problems and I don't really know what to do, despite my searching on the web. My phone is now unusable (I can access to the TWRP recovery, can use fastboot, but that's all..)
Do you have any advice to clean up all the mess I did ?
Thank you a lot for your time !
Download the stock rom (preferably 10.0.3.0) extract it along with adb and fastboot into the same folder, install the drivers, boot into fastboot, connect it to PC and run flash_all.bat and you should be back onto stock rom! If you want to install a custom rom follow this: github. com/tkchn/daisyinstall/blob/master/README.md
Armandpewpew said:
Hello everyone !
I have a xiaomi Mi A2 lite for few days, based on Pie 9.0. I decided to install a custom rom on it (resurrection or lineage OS16) so I unlocked the bootloader, rooted properly the phone, and then tryed to use TWRP to install a new ROM.
Unfortunatly, I never succeeded to do so: each time I tried, the installation failed, showing an "error 1".
Trying to fix this issue, I unfortunatly deleted the OS of my phone, and still can't install a new ROM. I tried to flash a stock ROM from xiaomi site, following this thread: https://forum.xda-developers.com/mi-a2-lite/help/os-image-please-help-t3885625/page3 , but Mi flash tool doesn't work well on my computer (it's still showing an "unhandled exception" error, whatever I'm trying to do.
Here we are, I've got two problems and I don't really know what to do, despite my searching on the web. My phone is now unusable (I can access to the TWRP recovery, can use fastboot, but that's all..)
Do you have any advice to clean up all the mess I did ?
Thank you a lot for your time !
Click to expand...
Click to collapse
Are you sure that you followed the procedure to install a custom rom? Can you tell which steps did you do? And about the error of MiFlash you can try with other version so there are many versions uploaded that don´t match well.
If you can't use the fastboot u need to force EDL Mode.. The best and simple way to install the ROM stock is using MI Flash Tool, u can find a tutorial in here or in YouTube it's easy if you follow all the steps! Good Luck
Armandpewpew said:
Hello everyone !
I have a xiaomi Mi A2 lite for few days, based on Pie 9.0. I decided to install a custom rom on it (resurrection or lineage OS16) so I unlocked the bootloader, rooted properly the phone, and then tryed to use TWRP to install a new ROM.
Unfortunatly, I never succeeded to do so: each time I tried, the installation failed, showing an "error 1".
Trying to fix this issue, I unfortunatly deleted the OS of my phone, and still can't install a new ROM. I tried to flash a stock ROM from xiaomi site, following this thread: https://forum.xda-developers.com/mi-a2-lite/help/os-image-please-help-t3885625/page3 , but Mi flash tool doesn't work well on my computer (it's still showing an "unhandled exception" error, whatever I'm trying to do.
Here we are, I've got two problems and I don't really know what to do, despite my searching on the web. My phone is now unusable (I can access to the TWRP recovery, can use fastboot, but that's all..)
Do you have any advice to clean up all the mess I did ?
Thank you a lot for your time !
Click to expand...
Click to collapse
The first problem with TWRP Error code :1 - the problem is with twrp itself- install a different version ,i am using 3.3.1-0 by offain ,i've had this error on allmost every twrp besides the offain versions and dees_troy.
The second problem : with the deleted os : you have 2 options :
1. Download the latest MiFlash from the official site and install it ,on the top left of the screen, you can see Drivers button ,click on install. Then navigate to stock rom folder ,go in fastboot mode on your device and connect to PC ,hit refresh ,then flash.
2. If this doesn't help ,custom rom is an option ,there are 2 links
https://daisyfiles.pp.ua/Firmwares/MIUI/ - from here download miui version Golden Master 1.1
https://forum.xda-developers.com/mi...ol-one-driversunlocktwrpfactory-t3866191/amp/ - download this all in one tool, you can lock ,relock ,install twrp recovery ,custom roms ,it is perfect!
For the installation - put the rom on sd card ,install twrp version that doesnt give Error 1 code ,then format data,system,cache,dalvik/art ,internal storage.
And the last thing - install the ROM zip and try MIUI 10.5 This is the best temporary solution,until you set MiFlash the right way ,or on another PC
Hello !
First of all, thank you very much for your quick and complete answer
I finally succedeed to flash a stock ROM on the phone, using Mi flash tool, so I'm back on track ! About the "unhandled exception" error, i've just fixed it by creating a "log folder" in the MI flash tool folder, it's good to know, maybe It will help someone else one day ^^
When I tried to install a custom ROM last time, I used the 3.3.1 version of TWRP. Because it didn't work (error 1), I used the 3.3.0 one and I had the same exact error code. Do you think I should try older versions one by one ?
I'm going to unlock it and root it right now,
Thank you again,
Arnaud
PS: Oh, last thing, when TWRP recovery will be properly installed on my phone, shall I root it by using magisk ?
Armandpewpew said:
I'm going to unlock it and root it right now,
Click to expand...
Click to collapse
Updating my situation:
So I successfully installed TWRP 3.3.3-0 on the phone and did a huge backup to avoid deleting my OS again.
Now I'm confused about what to do: I did understand that I need to root my phone (using magisk) BEFORE trying to install a custom ROM, but I'm really not sure about it, should I ?
I tried, and it still doesn't work (error1), I noticed that error 1 shows some interresting details:
"error installing zip file '/sdcard/TWRP/RR-P-v7.0.2-20190907-daisy-Official.zip' "
The point is I do not have any sd card in my phone (for the moment), is it possible that it can't install the ROM because TWRP is trying to install the ROM on an non-existing storage ? I will try to get an sdcard somewhere to check how it behave.
Thank you again,
Armandpewpew said:
Updating my situation:
So I successfully installed TWRP 3.3.3-0 on the phone and did a huge backup to avoid deleting my OS again.
Now I'm confused about what to do: I did understand that I need to root my phone (using magisk) BEFORE trying to install a custom ROM, but I'm really not sure about it, should I ?
I tried, and it still doesn't work (error1), I noticed that error 1 shows some interresting details:
"error installing zip file '/sdcard/TWRP/RR-P-v7.0.2-20190907-daisy-Official.zip' "
The point is I do not have any sd card in my phone (for the moment), is it possible that it can't install the ROM because TWRP is trying to install the ROM on an non-existing storage ? I will try to get an sdcard somewhere to check how it behave.
Thank you again,
Click to expand...
Click to collapse
Nope ,as i said ,error code is with the version of twrp ,i am using TWRP 3.3.3-1 dees_troy ,i've had the same problem as yours ,i was trying to flash from internal memory ,tried flash from sd card,the problem was the same.So i have tried 3 or 4 different versions ,3.3.3-0 (2 different versions ) gave me error 7 ,another 3.3.3-0 destroyed my system image ,3.2.3-0 don't show my sd card in twrp .So download TWRP 3.3.3-1by dees_troy ,i am using it right now ,but i am using the all in one tool ,that i have mentioned in my previous post - no errors ,no mistakes
Okay, I will try the TWRP 3.2.3 then, this is the only one I didn't try
What about magisk ?
SubwayChamp said:
Are you sure that you followed the procedure to install a custom rom? Can you tell which steps did you do? And about the error of MiFlash you can try with other version so there are many versions uploaded that don´t match well.
Click to expand...
Click to collapse
Hi !
I basically followed the procedure here: https://www.the***********.com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/
And then https://gmtechweb.com/resurrection-remix-v7-galaxy-s6/
Thanks for your time
Error 1 is for use official twrp, please read before, only twrp for custom ROMs is offain's twrp 3.3-1.0
Os_Herdz said:
Error 1 is for use official twrp, please read before, only twrp for custom ROMs is offain's twrp 3.3-1.0
Click to expand...
Click to collapse
Sorry I didn't undestand that at all
I will follow the ghitub step by step by using all pieces they provide. Only one thing, they give the Offain TWRP 3.3.0-0. Do you know where I can find the 3.3.3-1 you're all talking about ?
Armandpewpew said:
Hi !
I basically followed the procedure here: https://www.the***********.com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/
And then https://gmtechweb.com/resurrection-remix-v7-galaxy-s6/
Thanks for your time
Click to expand...
Click to collapse
The first link did take me to any place and the second is for other completely different device, I don´t know why following a procedure for a device with a different scheme partition.
It could be that previously you must have a determined firmware as base before to flash any custom rom, in this case you have to flash it using MiFlash tool checking on "clean all" option (preferably)
The moves basically are these:
1.- Boot to twrp-daisy-3.3.1-0-offain.img using fastboot (just boot to, don´t flash it)
2.- Wipe system, dalvik/cache, data from the previous.
3.- In the case is indicated by developer Format data.
4.- Flash the desired rom.
5.- Flash the twrp-daisy-3.3.1-0-offain installer zip (it´s not the same that the boot image) you can use adb sideload or previously move the file to your external SDCard or then to format data transfer the file to your internal SDCard.
6.- Go to the main menu on TWRP and in reboot options change to the other slot from A to B and viceversa, then to switch reboot again to recovery.
7.- Now flash the Disable-Force-Encryption.
8.- In the case (most likely you want) Flash the GApps and flash Magisk at last, then reboot normally.
The links for TWRP are these:
https://androidfilehost.com/?fid=6006931924117887098
https://androidfilehost.com/?fid=6006931924117887097
Hi !
They are too many flashing procedures everywhere, it's a giant mess and it's really hard to find the proper one when we don't use to it
Anyway, I finally succeeded to properly install a custom ROM on my phone by using this procedure: https://github.com/tkchn/daisyinstall/blob/master/README.md
Everything is now working well, thank you all for your help, you saved my day
HELP! I am getting the same error message, i know what I need to do, download the Offain version of TWRP, but none of the links work! Android File Host DOES NOT WORK for some reason. Can someone upload these files somewhere else for me? Please? I have no other way of getting these files, they don't exist anywhere else on the web... I have already tried every other available versions of TWRP and am getting the same error message (1) as OP.
Tipsymario said:
Download the stock rom (preferably 10.0.3.0) extract it along with adb and fastboot into the same folder, install the drivers, boot into fastboot, connect it to PC and run flash_all.bat and you should be back onto stock rom! If you want to install a custom rom follow this: github. com/tkchn/daisyinstall/blob/master/README.md
Click to expand...
Click to collapse
hey sir , i download 10.0.13 sinc emy internet sucks i can't just go and download another 1.5go of 10.0.3.0 , the probleme is i can't find flash_all.bat even miflash and all in one tool say they can't find flash_all.bat can u help me here where can i find it or build it ?
Alecjasonn said:
HELP! I am getting the same error message, i know what I need to do, download the Offain version of TWRP, but none of the links work! Android File Host DOES NOT WORK for some reason. Can someone upload these files somewhere else for me? Please? I have no other way of getting these files, they don't exist anywhere else on the web... I have already tried every other available versions of TWRP and am getting the same error message (1) as OP.
Click to expand...
Click to collapse
Try using this link if AFH is not working : https://daisyfiles.pp.ua/TWRP/