No wifi after flashing, either on BPA1 or CPD1 firmwares - Verizon Galaxy Note 4 Q&A, Help & Troubleshooting

I was trying to get rooted, I've downgraded and am on 5.1.1 on the CPD firmware currently, but I can't get wifi back. I had the boot loader unlocked but somehow lost it after flashing to the CPD firmware. I was using this guide: https://forum.xda-developers.com/no...guide-step-step-stock-n910v-6-0-1-to-t3426905
I've made it to step 35 from there, but I can't get Kingroot to work on this current firmware because of no wifi, I guess. It tries but it keeps failing.
Any ideas or suggestions? At this point I don't care if I have root or not, I just need a workable phone with wifi

At that point, you need a SIM card because you are on the updated bootloader (CPD1) for 6.01 and will not have WiFi. You have upgraded the bootloader, but you're still on the older 5.11 baseband. Pop a SIM card into the phone and root it once again. Then follow the rest of the instructions. It works. I've done it on multiple devices.

BeckPC said:
At that point, you need a SIM card because you are on the updated bootloader (CPD1) for 6.01 and will not have WiFi. You have upgraded the bootloader, but you're still on the older 5.11 baseband. Pop a SIM card into the phone and root it once again. Then follow the rest of the instructions. It works. I've done it on multiple devices.
Click to expand...
Click to collapse
Unfortunately, I've pulled the sim from my working phone and put it into this one, and despite running KingRoot about a dozen times now, I can't ever get it to go through. I don't know if I don't have enough data bandwidth here in the area for it to work entirely correct, or what, but I can't seem to get past this stage or get any wifi up and going again.

hondaatc said:
Unfortunately, I've pulled the sim from my working phone and put it into this one, and despite running KingRoot about a dozen times now, I can't ever get it to go through. I don't know if I don't have enough data bandwidth here in the area for it to work entirely correct, or what, but I can't seem to get past this stage or get any wifi up and going again.
Click to expand...
Click to collapse
It sounds like you're stuck on a 6.01 ROM with a 5.11 bootloader. You have a few more steps to complete before you're ready to flash to your hearts content. King Root doesn't download much.
I had the same problem once. Go to setting and do a hard reset on the device, wiping all data and let it boot up for the first time (with the same ROM installed. Don't sign into Google, just skip all the setup routines. Install King Root and try again. It should work. It might take a few times. It's extremely unstable. As soon as you get root, run the ADB routine quickly and unlock the bootloader. Now you can use ODIN to flash the final file N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar. That will update you to the new firmware and restore your wifi. Don't let the phone reboot automatically. Once it's done, pull the battery. Leave it out for a minute at least. Then start up the phone in bootloader mode (vol down, home and power). Immediately after that, you want to use ODIN to install the twrp 3.0.20 file as well.
Now boot up the phone and enter TWRP. Do a standard wipe (cache/dalvic/data) but not System. Do it twice. Now reboot. You should be unlocked (open padlock on the screen) and booting into 6.0.1. You can check for root. At this point, you should be good. Now you can flash any ROM that requires the CPD1 firmware. You can always update the modem, but your firmware will remain at that version. Personally, I recommend Modest Rom 8. It's as close to stock as you can get, with a few nice tweaks and addons that makes life a bit better. From there, you can experiment all you want.
Two more bits of advice ... once you have it rooted and fixed up, you need to do two things.
1. Use Root Explorer to completely delete all files from /systems/efs folder. Why you ask, this folder will contain chinese junk that will slow down your phone. Trust me. It works and hurts nothing. Do this especially after rooting.
2.Use TWRP to make a backup of the complete system to your memory card. It's so much easier to go back and restore, than it is to redo all the work you just did.

BeckPC said:
It sounds like you're stuck on a 6.01 ROM with a 5.11 bootloader. You have a few more steps to complete before you're ready to flash to your hearts content. King Root doesn't download much.
I had the same problem once. Go to setting and do a hard reset on the device, wiping all data and let it boot up for the first time (with the same ROM installed. Don't sign into Google, just skip all the setup routines. Install King Root and try again. It should work. It might take a few times. It's extremely unstable. As soon as you get root, run the ADB routine quickly and unlock the bootloader. Now you can use ODIN to flash the final file N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar. That will update you to the new firmware and restore your wifi. Don't let the phone reboot automatically. Once it's done, pull the battery. Leave it out for a minute at least. Then start up the phone in bootloader mode (vol down, home and power). Immediately after that, you want to use ODIN to install the twrp 3.0.20 file as well.
Now boot up the phone and enter TWRP. Do a standard wipe (cache/dalvic/data) but not System. Do it twice. Now reboot. You should be unlocked (open padlock on the screen) and booting into 6.0.1. You can check for root. At this point, you should be good. Now you can flash any ROM that requires the CPD1 firmware. You can always update the modem, but your firmware will remain at that version. Personally, I recommend Modest Rom 8. It's as close to stock as you can get, with a few nice tweaks and addons that makes life a bit better. From there, you can experiment all you want.
Two more bits of advice ... once you have it rooted and fixed up, you need to do two things.
1. Use Root Explorer to completely delete all files from /systems/efs folder. Why you ask, this folder will contain chinese junk that will slow down your phone. Trust me. It works and hurts nothing. Do this especially after rooting.
2.Use TWRP to make a backup of the complete system to your memory card. It's so much easier to go back and restore, than it is to redo all the work you just did.
Click to expand...
Click to collapse
Well that gives me some hope I'm on the right track, I guess I'll keep trying. I've done much of that, and the thing is every time I do a factory reset (Like before an odin flash), I get stuck in a boot loop again until it seemingly randomly comes out of it and starts up normal again, so its kinda spooky doing that. All the steps and finagling makes me yearn for my old Samsung Moment that was a simple drop a rom onto the SD card...lol

If you have the SD card installed, remove it. It may need to be cleaned for the phone to boot properly.
Just do the wipe and reboot normally. See if it will continue. You'll need the SD card later, but it needs to be formatted if it was used during the bootloader backup. It looks like you are almost finished. Just one more round with the ADB command and you'll be complete.

BeckPC said:
If you have the SD card installed, remove it. It may need to be cleaned for the phone to boot properly.
Just do the wipe and reboot normally. See if it will continue. You'll need the SD card later, but it needs to be formatted if it was used during the bootloader backup. It looks like you are almost finished. Just one more round with the ADB command and you'll be complete.
Click to expand...
Click to collapse
Okay, so I went back and did factory reset from recovery console to retry Kingroot. I noticed though, it set me back to BPA, and not CPD1. So now I'm trying to use odin to back back up to CPD1.
Was this normal, for a factory reset to go back to BPA, or should it have kept me on CPD1?

It sounds like you missed a step unlocking the bootloader. You have to do it three times, with each firmware update you do. A factory reset should not have rolled back to BPA1. Why don't you take a look at the other thread on rooting and use it. When I got to the bottom of the one you're using, I knew I didn't want to do the Jasmine ROM, so I followed this one: https://forum.xda-developers.com/no...asy-guide-how-to-root-verizon-galaxy-t3454593
Just take it slowly and it will take a couple of hours, but once it's done, you'll be rooted.

hondaatc said:
Okay, so I went back and did factory reset from recovery console to retry Kingroot. I noticed though, it set me back to BPA, and not CPD1. So now I'm trying to use odin to back back up to CPD1.
Was this normal, for a factory reset to go back to BPA, or should it have kept me on CPD1?
Click to expand...
Click to collapse
If you have rooting issues try inputting the proper APN manually before attempting to root. That was my issue. Even tho it recognized my sim it wouldn't root until I put in my actual APN settings for Koodo.
Try an older version of the root apps also.

Related

Android update!

Disclaimer: This worked on my phone. I am not responsible if your phone turns into an expensive brick.
I know this isn't quite the update everyone was waiting for I managed to pull the 2.3.6 OTA files. I also managed to figure out how to flash them. Turns out CWM 5 offers root adb access, everything we need to update and root this phone. Note I tried CWM 6 but it said "possible loss of root" so apparently CWM 6 likes to reside on an already rooted phone.
Note this is not the most elegant solution. The most elegant would be a signed update.zip. The second most elegant would be something flashable with CWM or Odin. Too bad I don't know how to do those. I do know how to do this.
The first thing to do is make sure you are on the AT&T stock firmware. It doesn't matter if you've already flashed something else. No need to wipe cache or factory reset or anything (although if you run into problems you should try to do that step). Download it from samfirmware.com. Flash it with Odin. This will put you on stock 2.3.5. Even if you were already on 2.3.6, or rooted, or on Rogers, this will work. After the flash, boot the phone normally, wait a minute or so, and shut it down.
Now for the fun part. AT&T will not push the OTA to a non AT&T customer. The flash will also not work with a modified phone (hence the reflash to stock). How to gain root access to manually flash the OTA? If we install root, it will not install. If we install CWM, we will not have the stock recovery which is required to process the OTA. So...
How about this? We install CWM 5. You can find it here http://forum.xda-developers.com/showthread.php?t=1458153
Then we adb into the phone, and push the OTA files, and then reflash the stock recovery over CWM, and then manually reboot into OTA mode. That sounds crazy... crazy enough to work.
After you've flashed CWM, reboot into it and make sure your phone is still connected to your computer. We won't actually be using CWM, just the root access it provides over adb. Unzip the two zip files below (why use external hosting, I can store zips up to 11 MB on here) into a folder and run fota.bat. Ooo and ahh over your Gingerbread.
But what about root? Well, I posted in another thread a complicated method for rooting 2.3.6 using the root access from CWM, but how about easy? Boot your phone into 2.3.6 and let it sit for a minute or so, and shut it down. Reboot into Odin mode, and reflash CWM over the stock recovery (again). Copy the Superuser zip from the folder you made earlier to your SD card. Flash this with CWM. This is the beta of Superuser 3.2, courtesy of Rom Manager. Download the stericson busybox app from the Market if you want busybox as well.
This was a fun way to kill a weekend
Throws a signature verification failed error.
Try again with the new method
Had a few mild scares. After flashing CWM on stock, it refused to boot into it but after 3 tries and my screen acting up upon boot, it finally booted into CWM. Launched the bat file and it went well. Upon booting up and entering the update process, it froze up at 74% and refused to continue. Rebooted the phone and it once again entered the update process and this time it managed to finish. Phone rebooted and after checking "About phone", my phone is on 2.3.6 stock. When you initially provided the OTA files and the sig check failed, I had a good feeling this would be the only other way to do it as I tried to sign it and it also failed. Thanks for taking the time to post all of this.
Why go to 2.3.6? It´s better than 2.3.5 customized?
Better question: we're getting ICS within the month, so why bother with 2.3.6 when you can just upgrade to 4.x.x when it comes down?
-Ara
AraDreamer said:
Better question: we're getting ICS within the month, so why bother with 2.3.6 when you can just upgrade to 4.x.x when it comes down?
-Ara
Click to expand...
Click to collapse
Because there are some people who will want to stick with 2.3.5/6 . He made this so that those who do, can update to 2.3.6 even when they aren't with AT&T, almost hassle free.
narume said:
Had a few mild scares. After flashing CWM on stock, it refused to boot into it but after 3 tries and my screen acting up upon boot, it finally booted into CWM. Launched the bat file and it went well. Upon booting up and entering the update process, it froze up at 74% and refused to continue. Rebooted the phone and it once again entered the update process and this time it managed to finish. Phone rebooted and after checking "About phone", my phone is on 2.3.6 stock. When you initially provided the OTA files and the sig check failed, I had a good feeling this would be the only other way to do it as I tried to sign it and it also failed. Thanks for taking the time to post all of this.
Click to expand...
Click to collapse
When I was testing this, I saw that behavior if you didn't completely boot up the phone between steps (ie, flash stock firmware, boot phone, flash CWM, boot phone). I don't know what would cause it otherwise. Glad to see your phone made it.
narume said:
Because there are some people who will want to stick with 2.3.5/6 . He made this so that those who do, can update to 2.3.6 even when they aren't with AT&T, almost hassle free.
Click to expand...
Click to collapse
Actually I did it because I've owned this phone for exactly two weeks and discovered all the available ROMs are based on 2.3.5 even though 2.3.6 has been out since December. CWMR with root has been out since January, and since then nobody else has rooted 2.3.6 or found a way to flash it. And I thought, it couldn't be that hard? And even more amazed when I discovered CWMR comes with root out of the box, without even touching /system. The only other missing piece was the stock recovery, which also wasn't out in the wild. 3 birds for one stone
On a side note, if you want to do some cleaning after the OTA and you decide to root, you can delete /cache/fota and /data/fota safely.
Nardholio said:
Actually I did it because I've owned this phone for exactly two weeks and discovered all the available ROMs are based on 2.3.5 even though 2.3.6 has been out since December. CWMR with root has been out since January, and since then nobody else has rooted 2.3.6 or found a way to flash it. And I thought, it couldn't be that hard? And even more amazed when I discovered CWMR comes with root out of the box, without even touching /system. The only other missing piece was the stock recovery, which also wasn't out in the wild. 3 birds for one stone
On a side note, if you want to do some cleaning after the OTA and you decide to root, you can delete /cache/fota and /data/fota safely.
Click to expand...
Click to collapse
Ah, I see. Well, still, being able to flash to 2.3.6 is nice because if anyone ever decides to stick with 2.3.6 they can easily flash the update now. Maybe more people like you will pop up and start pushing out more useful content like this for the Glide so it won't be a dead area of development anymore.

[Q] Bricked my phone... Need Help.

Like I'm sure this topic hasn't come up before, but I've searched for hours and I'm probably just making things worse. I also just accidentally deleted this post halfway through. It's too late and I'm too tired and I have no working phone.
Bought an SGH-I747 on E-Bay. Got a Straight Talk SIM card kit, activated it, so far so good.
Rooted it with CF-Auto-Root. Worked pretty well, took a lot of reboots, upgraded the SU from the Play Store and it got rid of Knox. So far so good. Got everything all set up the way I like it. Happy.
It was running 4.4.2. I'm assuming it was the release prior to the November 12th OTA release, but I can't say for sure.
Phone downloaded and installed an upgrade automatically. Now, it won't boot. I get the SAMSUNG logo, then the Samsung Galaxy S III logo then nothing.
I retried the CF-Auto-Root, no change.
I booted into recovery (volume up, home and power on), did factory reset, no change.
Started looking around for a way to return it to stock. Found an upgrade43.zip file somewhere (I'm sorry I can't find where I got that now). Put it on the sdcard card and tried installing it with the recovery and it fails part way through.
At this point, I think I probably need to completely overwrite everything with something stock. I just don't know how to do that. I see posts on such subjects but they all have warnings that make me think I'm going to totally brick the phone, so I'm hoping someone can point me the right way. I'm not all that Android savvy, as you can tell.
Help.
Since your phone was running 4.4.2, do not attempt to flash any ROMs using that attempt to downgrade your bootloader to anything prior to 4.4.2.
Try this to get your phone up and running:
download the latest CM11 for the d2lte and save it to an external SD card: https://download.cyanogenmod.org/?device=d2lte
dowload the latest tar.md5 version of Philz Touch for the d2lte from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
boot phone in download mode, open Odin 3.07, do not check anything except f.reset.time, flash Philz via PDA box, remove USB cable when you see the word Reset appear in the status window, remove battery, replace battery, boot into recovery, format system, Dalvik, data, and cache, flash cm11, and reboot.
Thank you for your reply. There are a few things in there I don't quite understand, but I think I can figure it out.
I was going to attempt this...
http://forum.xda-developers.com/showthread.php?t=2658486
In fact, I did attempt it with TWRP last night after I posted here and new I still wasn't going to sleep. I kept getting an error about a bad ZIP file.
Is that stock restore a bad idea?
Do not attempt to flash an older bootloader. The mjb bootloader is from 4.3 and attempting to flash it could hard brick your phone.
I suggest doing what I suggested so you can confirm the bootloader and modem installed on your phone.
OK. Thanks. Probably a good thing I couldn't get it to work then.
Thank you so much. I have a working phone again. Now I just have to get it all set back up the way I like it.
I have to say, and it's probably words straight from the devils mouth, that I kind of wish I could have restored the Samsung stock software. It's just what I'm used to. But I will take what I can get.
A few questions. I like having root. But root is what got me in trouble in the first place. Is this going to be rooted now, or will I have to do that or am I better off just leaving it alone.
Second, I'm probably going to have questions since this is so different than what I'm used to (like I already can't find the Play store). Where is the best place to ask?
If you want root, one of the easiest ways to get it is to flash supersu from your custom recovery. Most ROMs are pre-rooted.
Many custom ROMs do not include Gapps. Just download and install the Gapps version for your ROM.
If you like the TW look, flash a TW-based ROM. Check out the development threads for different ROMs.
here is a thread for Q's that has some pretty good/friendly helpers on it if you need.
http://forum.xda-developers.com/showthread.php?t=2257421
"all i can really do , is stay out of my own way and let the will of heaven be done"
How to save in to external SD card
How do you save the file into the external SD card? I am having the same brick issue with my GS3.
To save a file to an external SD card, just put the card into a card reader and save the ROM to the SD card.

[Q] Really need your expert help guys! SM-T800

Alright, I'll lay out what happened. My end goal is to just have a rooted tab, but at this point, I'd be willing to just have it back to how it was. Preferably without losing everything on it.
-Looked around on how to root it, and found the following, and use the files it suggested.
- Seemed easy enough, and I had rooted/installed android on my old HP Touchpad, so I dl'd the files, and gave it a shot.
- Couldn't get CWM recovery on it, so I ran verify root and it said it wasn't rooted, even though I has SuperSU. It would even ask to grant apps permission, and I'd grant it.
- I opened SuperSU, and it'd say it needed to update the binaries, but would fail on normal, so I dl'd the newest zip, booted into recovery, and tried to load it like that, but 2 lines would come up red. I think they were just verifying signatures, so I ignored it and let it reboot.
- I opened SuperSU again, and it still said it needed the binaries updated, failed on normal attempt. I decided to try again from scratch, unrooting it and all. So, I went into the SuperSU settings and did it's thing, but it still had the version of SuperSU that initially was on it (it wouldn't let me past the "update binaries" prompt).
- I found that I needed to use Odin to flash a stock firmware back on it, and dl'd both version here.
- I tried the first one, and then it wouldn't get past the "Samsung" screen (the 2nd one with just the word Samsung, if it matters).
- I can still boot into Odin and Recovery, thankfully, so I tried the 2nd stock firmware. Same issue.
- Finally, I tried the rooting process again, hoping to get it to boot, same thing. So, I tried the 2nd stock firmware again, praying something good would happen, and still stuck on the Samsung screen.
I can still boot into Odin and recovery, but I have no idea where to go from here. I still want it rooted if possible, and I'd prefer not to lose all my games and such. I just found "[ROOT][RECOVERY] [ALL IN ONE] Cf-Autoroot-twrp-T800-T805-T-700-T705" thread here, but I didn't want to try it just yet.
It's a SM-T800. I had Lollipop on it. Don't know much else to add, but please help!
Thanks all.
Cypher5235 said:
Alright, I'll lay out what happened. My end goal is to just have a rooted tab, but at this point, I'd be willing to just have it back to how it was. Preferably without losing everything on it.
-Looked around on how to root it, and found the following, and use the files it suggested.
- Seemed easy enough, and I had rooted/installed android on my old HP Touchpad, so I dl'd the files, and gave it a shot.
- Couldn't get CWM recovery on it, so I ran verify root and it said it wasn't rooted, even though I has SuperSU. It would even ask to grant apps permission, and I'd grant it.
- I opened SuperSU, and it'd say it needed to update the binaries, but would fail on normal, so I dl'd the newest zip, booted into recovery, and tried to load it like that, but 2 lines would come up red. I think they were just verifying signatures, so I ignored it and let it reboot.
- I opened SuperSU again, and it still said it needed the binaries updated, failed on normal attempt. I decided to try again from scratch, unrooting it and all. So, I went into the SuperSU settings and did it's thing, but it still had the version of SuperSU that initially was on it (it wouldn't let me past the "update binaries" prompt).
- I found that I needed to use Odin to flash a stock firmware back on it, and dl'd both version here.
- I tried the first one, and then it wouldn't get past the "Samsung" screen (the 2nd one with just the word Samsung, if it matters).
- I can still boot into Odin and Recovery, thankfully, so I tried the 2nd stock firmware. Same issue.
- Finally, I tried the rooting process again, hoping to get it to boot, same thing. So, I tried the 2nd stock firmware again, praying something good would happen, and still stuck on the Samsung screen.
I can still boot into Odin and recovery, but I have no idea where to go from here. I still want it rooted if possible, and I'd prefer not to lose all my games and such. I just found "[ROOT][RECOVERY] [ALL IN ONE] Cf-Autoroot-twrp-T800-T805-T-700-T705" thread here, but I didn't want to try it just yet.
It's a SM-T800. I had Lollipop on it. Don't know much else to add, but please help!
Thanks all.
Click to expand...
Click to collapse
Well... you said you just updated to lollipop, but in order to not stay stuck at splash screen, you have to factory reset. I saw that you don't want to lose your games and such so you probably only have one option. That option is to flash twrp and make a nandroid of your data. Simply boot into download mode, download the twrp .tar http://twrp.me/devices/samsunggalaxytabs105.html
And now go into Odin, untick autoreboot, now hit the pda/AP button and pick the twrp tar. Hit start and let it do its thing. Now after its done flashing, your gonna have to force reboot. Simply hold power+volume up and down+home button all at the same time. Wait a bit and when the screen turns black, quickly press power+volume up+ home buttons all at the same time and it should boot into twrp.
Now in twrp, hit backup and hit backup data. Hopefully that should save your apps installed. Now after its done, go into wipe and silde factory reset. It should remove installed apps from Google play store and it won't remove pictures and such. It just removes the apps you installed. Then now reboot and wait....
Hopefully this helped
-DUHA
As said you will have to factory reset, this will wipe data and cache.
You can use the link you posted above to install TWRP and root.
http://forum.xda-developers.com/galaxy-tab-s/development/root-cf-autoroot-twrp-t800-t3079488
Lollipop changes the data partition so even if you back it up and then restore it with twrp In kitkat it likely won't boot afterwards.
All you can do is wipe it and take the hit.
Alright, I have TWRP running. The size of my "data" is just over 16 gig, and my space on the sdcard is 14.9 gig, so I've been trying to delete data to knock it down. I still have 1.3 gig to go. Everything I'm deleting, in the data folder, is barely making an impact.
I see what you're saying that I probably won't be able to restore it and have it work, but I still will try. I can always factory reset it again later. Once I wipe it, though, and update back to lollipop, couldn't I restore that data backup?
I gotta take a break and knock out some real work, lol, then I'll continue, and update here. If nothing else, maybe it'll help some other poor soul like me in the future!
Once I have it booting all the way again, do I just use TWRP to install SuperSU and it's rooted? Thanks again. I appreciate it!
Not sure what youre trying to do here. Just wipe the data partition with twrp,
Sent from my SM-T805 using XDA Free mobile app
Ashyx, I was just trying to save my game data, while ending up with a rooted tab. And you were right, of course! I tried to restore the back up to no avail, haha....well, I wiped it again, and it booted up just fine, and it is rooted to boot. I can't believe it was that easy with TWRP to root it.
I'm betting this isn't going to work out, but is there anyway to extract my game data from that backup I made, and transfer just that back to my tablet? If it is possible, it'll probably be beyond my ability, I bet, but I'm just curious.
One other question. With TWRP, can I get Lollipop back on it? Or do I need something else on it first?
Now, it's off to figure out how to get my Impulse Controller to work with it so I can play my games with it!
Thanks for helping me out, regardless. I truly thought I had bricked my $600 tablet. My wife would've killed me for wasting that much money, lol!
There is an app called nandroid manager that will allow you to extract data from nandroids, you could extract your game data with that.
The better way would be to make a system and data backup of your current system, reflash lollipop then restore your lollipop data backup. Then back up your game data with titanium backup.
Restore your kitkat backup then restore your game data with tb.

[Q] I have a sem-complicated soft bricking problem

So I wanted to root this tablet, and I used a video online to help me do so.
I installed the USB drivers, got Odin 3, and loaded in CF_AutoRoot_Port_T700_BeansTown106.tar
It rooted my tablet and I was pretty happy about that. I then had update supersu, by getting the SU binaries.
So I came to this site and downloaded the recommended Supersu, and flashed it. It fixed that.
Well, then I wanted to get a custom ROM, so I flashed the Cyanogenmod 12, along with the component with it.
I found I didn't like it compared to my 5.0.2 Lolipop, and so I tried finding the stock ROM.
The gator download site everyone was showing refused to let me download anything, and just about all the ROMS seemed like they were from countries other than the U.S.
I searched for awhile, found nothing, then found a ROM called the Ironman Lolipop ROM, it was close enough to stock, so I flashed it.
Suddenly everything was normal, but then supersu needed binaries again, and after I flashed it again, it just stopped asking if it should grant permission, making the root useless.
Frustrated, I looked online again for ROMS, found a Canada one, decided to download, it would take two hours.
Well I'm not from Canada so I doubted it would work, and didn't want to wait two hours.
I decided to Flash back the Cyanogen.
Well unfortunately I went in and found out that I had deleted it earlier, whoops. And so my data wipe brought me back to Ironman ROM.
So, thinking that flashing to Iron Man screwed up my root I tried to re-root with Odin, the same way as the first.
It then had trouble booting, and when it did, it hung at the Samsung logo.
Now I've been stuck on this logo for about an hour, I can't turn it off. I'm assuming the only way to is to wait for it to run out of power.
I have been using TWRP this whole time.
I twice have backed up, and wiped data.
When I hit restore I saw no backups though, I'm not sure if they were for the ROM?
I don't know, I only have a year of experience.
Edit: I have an 8.1" T700 from Amazon.
pennylessz said:
So I wanted to root this tablet, and I used a video online to help me do so.
I installed the USB drivers, got Odin 3, and loaded in CF_AutoRoot_Port_T700_BeansTown106.tar
It rooted my tablet and I was pretty happy about that. I then had update supersu, by getting the SU binaries.
So I came to this site and downloaded the recommended Supersu, and flashed it. It fixed that.
Bla bla ......
Click to expand...
Click to collapse
Hi! To force reboot while in a soft brick, press and hold power+home button+ both volume buttons all at the same time.
Then when the screen goes black, quickly press the odin\download mode button combo or recovery comba if you wish.
Luckily, I have mirrored the latest firmware for the T700 to a faster hosting site. This is an UK firmware and is the latest one. It should flash fine as I have flashed different firmwares from different countries many times.
Download Firmware (fast download): https://www.androidfilehost.com/?fid=24052804347761130
Now, ironrom has problems with root sometimes. When I make roms I don't preroot them as they cause problems of binaries if you preroot them. Anyway feel free to flash the firmware with odin or load an custom ROM to your sd card and flash it.
Hope this helps!
DUHAsianSKILLZ said:
Hi! To force reboot while in a soft brick, press and hold power+home button+ both volume buttons all at the same time.
Then when the screen goes black, quickly press the odin\download mode button combo or recovery comba if you wish.
Luckily, I have mirrored the latest firmware for the T700 to a faster hosting site. This is an UK firmware and is the latest one. It should flash fine as I have flashed different firmwares from different countries many times.
Download Firmware (fast download):
Now, ironrom has problems with root sometimes. When I make roms I don't preroot them as they cause problems of binaries if you preroot them. Anyway feel free to flash the firmware with odin or load an custom ROM to your sd card and flash it.
Hope this helps!
Click to expand...
Click to collapse
Thank you for getting me out of the brick and back to stock.
However going into Supersu it says.
"There is no SU binary installed, and SuperSu cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root- consult the relevant forums for your device!"
My question is, can I properly re-root it the way I had been?
I'm assuming if it soft bricks again I can just reinstall a stock ROM again.
Also all these ROMS and backups take up a lot of space, how would I go about deleting those when I'm done?
pennylessz said:
Thank you for getting me out of the brick and back to stock.
However going into Supersu it says.
"There is no SU binary installed, and SuperSu cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root- consult the relevant forums for your device!"
My question is, can I properly re-root it the way I had been?
I'm assuming if it soft bricks again I can just reinstall a stock ROM again.
Also all these ROMS and backups take up a lot of space, how would I go about deleting those when I'm done?
Click to expand...
Click to collapse
In my files app, look for an folder called TWRP. Your backups are in there. To root simply install twrp and follow the twrp method to root. http://forum.xda-developers.com/showthread.php?p=59638836
You can delete your backups from within twrp. Just select restore, then the backup, then delete.

Help - Galaxy Tab S 10.5 Bootloop Out of Nowhere

So...
Last week, my wife's Tab S went into a bootloop. She runs complete stock, we haven't rooted, or anything. There had been a notification about an update, but she hadn't touched it. She'd updated to Lollipop at some point last year, but hadn't applied the absolute latest update. One day last week, she just turned it on, and it started bootlooping.
Because it was so stock, there were no backups, no nandroids, or anything like that. No Custom Recovery. I told her "well, we can just do a factory reset. You'll lose everything, but once we get you back up and running, it'll just re-download everything from the Goog." So we factory reset it. Looked good for a minute, booted into the first screen, enter in your Wi-Fi password, all that. As soon as we got the Wi-Fi password entered, however, it re-booted. And keep rebooting. Bootloop city. No problem. I walked her through (over the phone) using Odin to flash the latest Lollipop firmware. No dice. It appeared to flash successfully, but still bootlooped.
Over the weekend, I tried using Kies to flash the most official firmware I could find. Everything was successful -computer recognized the device, was able to download "direct from the source," as it were, but it got stuck at 69% twice before failing. I read somewhere that one had to run Kies in administrator mode to get it to successfully complete. So I did, and it got past 69%, successfully completing the flash. STILL NO LUCK. STILL WITH THE BOOTLOOPS.
Last night, I realized that I hadn't flashed in Odin using Administrator Mode. Tried it, using latest 5.0.2 (XAR-Cellular South). Flashed successfully, all appeared well. Still bootlooped.
So, I'm stuck. I can get into recovery, I can get into Download Mode, I can successfully flash. I just can't get the darn thing booted.
Thoughts, anyone? Should I try flashing a Custom ROM? How hard is that using Odin? Thanks in advance.
Ok this will take a few tries but here is my method of dealing with this situation
1) Flash stock using Odin
2) AS SOON AS the screen goes blank, start holding Power+Volume Up+Home
3) When recovery boots, release the buttons
4) Use the volume buttons to select "Wipe data/factory reset"
5) Press power to confirm
6) Reboot
If that doesn't work, you may either:
1) (more likely) Installing a ROM will fix the problem
2) (unlikely but possible) You might have worn NAND pages, which I doubt but could cause this behavior.
Nandr0idC0nsumer said:
Ok this will take a few tries but here is my method of dealing with this situation
1) Flash stock using Odin
2) AS SOON AS the screen goes blank, start holding Power+Volume Up+Home
3) When recovery boots, release the buttons
4) Use the volume buttons to select "Wipe data/factory reset"
5) Press power to confirm
6) Reboot
If that doesn't work, you may either:
1) (more likely) Installing a ROM will fix the problem
2) (unlikely but possible) You might have worn NAND pages, which I doubt but could cause this behavior.
Click to expand...
Click to collapse
Thanks, I'll try these steps tonight when I get home, and report back!
All right, here's something interesting. Before I tried your first step, I remembered that the other night, I left it stuck at the Samsung logo -it was just kind of stuck there, and since the behavior was a little different than I'd seen before (not continuous bootlooping), I thought I'd boot into recovery and wipe. I did, I wiped (factory reset), and rebooted. The tablet booted into the first screen, Accessibility/Wi-Fi, blahblah. This was where it usually rebooted. On a hunch, I bypassed entering in my WiFi key. I then bypassed almost everything else (Samsung account, Google account, etc.), expecting that the tablet would reboot at any moment. But I made it to the front apps page, where it shows you the side-launcher, the Magazine-Flipboard thingie, and whatnot. Wi-Fi still not connected, though. I opened up the app drawer, and scrolled around. Looked really good for a moment. I even took a picture with the camera, and viewed it in Gallery! Feeling brave, I thought, "well, maybe it just needed a couple of minutes before firing up the radio." So I went into settings, and inputted my WiFi key. It connected. And rebooted into its bootloop. (getting so tired of that boot-sound).
Went ahead and flashed the most original stock firmware I could find. As always, flashed successfully. As soon as it booted, I made my way to recovery, and wiped, per your instructions. No luck. Bootloop again.
It's something in the WiFi is what I've come to think as a result of the above. Which I don't entirely understand, as I thought the radio got re-flashed with the firmware.
I'm ready to try flashing a Custom Rom. Can I do that through Odin, or should I try and flash TWRP, and do it through there? Will TWRP flash without a working (bootable) OS?
All right. Thanks for your response!
Try this as a test.
First make a full backup of every partition with twrp including the EFS <<IMPORTANT!
Get it booting again without wifi then root the device and delete the EFS folder or delete it in recovery.
Reboot the device and try and enable wifi.
ashyx said:
Try this as a test.
First make a full backup of every partition with twrp including the EFS <<IMPORTANT!
Get it booting again without wifi then root the device and delete the EFS folder or delete it in recovery.
Reboot the device and try and enable wifi.
Click to expand...
Click to collapse
Got TWRP installed. Won't backup. Fails at 16% (system partition, I think). Just powers down to battery indicator in the middle of the backup. Looks like it backs up the EFS, though, since it's the first one. And when I go into TWRP's Restore option, there's a backup there (though I don't dare try and restore it).
Now I have to figure out a way to get the Custom ROM and GAPPS I downloaded onto the tablet without a reliable boot... It's gotten to the front screen a time or two tonight, but starts looping even when I bypass the WiFi setup.
Entered adb/TWRP interface. Tried to push two files, a Custom ROM file, and a GAPPS file. The ROM failed, with some sort of "Error 7," incompatible data, blahblah... Just out of curiosity, I tried to push the GAPPS file, and that failed after about 6%, and the tablet powered off.
I'm running out of ideas.
copied a custom rom to a USB/OTG stick (thumbdrive), and plugged it in. Fired up TWRP, tried to install. Wouldn't. Wouldn't install GAPPS, either. Looks like the only way it wants to flash anything is through ODIN or KIES.
The Latest...
All right...
I remembered that sometimes the TWRP version mattered. When I installed TRWP last night, I installed the latest and greatest, 3.0.2. Last night after I gave up, I remembered that sometimes, the latest and greatest TWRP doesn't install things perfectly. So, this morning, I downloaded TWRP 2.8.6-ish onto the USB/OTG device, and re-flashed the recovery partition. To be honest, I was surprised that TWRP was even able to flash that (but the TWRP image is only like 9.8 MB, so...)...
Got TWRP 2.8.6.0 flashed, and rebooted into TWRP. Immediately decided to try and re-flash the custom ROM that I'd tried unsuccessfully to flash last night, since the thumbdrive was still plugged in. Resurrection Remix Lollipop. Lined up GAPPS in the queue, as well. The ROM *appeared* to flash better than it had in TWRP 3.0.2, but it was sort of hard to see... GAPPS failed, and I was prepared to watch another round of bootloops. It did bootloop, sort of. The RR splash screen appeared, said that it was installing (or preparing) xx out of XX apps. Then, it rebooted. I figured it was doing its bootloop thing. However, it got to the same screen, "installing xx out of XX apps. Except that XX number had gone down, and the xx number had gone up. It repeated this action about 4 times --the last time I saw it reboot, it was "installing 1 out of 2 apps." And then...?
It booted into the RR lockscreen.
Of course, there were no GAPPS. In fact, there are something like only 20 apps total on the tablet. But it appears somewhat stable at the moment. (See picture).
Afraid to try and connect WiFi, afraid that it'll just bootloop.
Speaking of bootloop. At one point, once we got it booted, my wife hit an option in the Settings. LCD Density, I believe. As soon as she hit it (she literally just placed her finger over the 320 default option), the tablet rebooted. No loop, though. Rebooted straight back to the RR lockscreen.
So I appear to have a somewhat stable OS flashed onto the tablet at the moment. No GAPPS, though. No WiFi.
Anybody have a suggestion on where to go from here? I have my doubts as to whether or not I can even back up this configuration.
Sorry about all the updates. I kind of figured that if *anyone* else ever goes through what I'm going through, they'll have some sense of all the different things that can be tried in resurrecting a bricked/bootlooping device. I appreciate everyone's efforts to date -thank you so much, @Lightn1ng and @ashyx.
All right, because I can't leave well enough alone....
I got WiFi up and working. Tablet still stable and working. Wheeeee.... No GAPPS, though.
Downloaded GAPPS, second-smallest package from opengapps- only 128M (5.1 ARM package). Downloaded it in Android, from the tablet! Tried to flash it in TWRP. Failed, tablet rebooted halfway (not even) through. Now it's bootlooping again...
I should've left well enough alone, and waited for someone. Have tried re-installing Resurrection Remix, but tablet keeps failing to flash. Might have to try and flash a different TWRP. I don't know...
Have you tried another Gapps? Also, is this the WiFi only model or the LTE model we're talking about?
Lightn1ng said:
Have you tried another Gapps? Also, is this the WiFi only model or the LTE model we're talking about?
Click to expand...
Click to collapse
It's the WiFi-only model - SM-T800.
It's kind of weird. I thought it might be some sort of internal memory problem (like the worn Nand pages you mentioned), since almost anything I try to do in TWRP fails (although I was able to flash an entire Custom ROM the one time AND get it booted) -but backing up isn't working, whether it's to internal/external SD. And the fact that I can flash perfectly (subjective term there) well using Odin or Kies tells me that whatever problems the tablet is having, something's getting through.
I'll try a different GAPPS package. Right now, though, TWRP isn't letting me flash hardly anything, and moving files back and forth on this thing is just awful.
AGH - I was so close!
daina said:
It's the WiFi-only model - SM-T800.
It's kind of weird. I thought it might be some sort of internal memory problem (like the worn Nand pages you mentioned), since almost anything I try to do in TWRP fails (although I was able to flash an entire Custom ROM the one time AND get it booted) -but backing up isn't working, whether it's to internal/external SD. And the fact that I can flash perfectly (subjective term there) well using Odin or Kies tells me that whatever problems the tablet is having, something's getting through.
I'll try a different GAPPS package. Right now, though, TWRP isn't letting me flash hardly anything, and moving files back and forth on this thing is just awful.
AGH - I was so close!
Click to expand...
Click to collapse
I'm running out of ideas!
Maybe somebody else with a T800 could backup their entire EMMC using
Code:
dd if=/dev/mmcblk0 of=/sdcard/full_nand_dump.bin
And you take the file on your tablet and do
Code:
dd if=/sdcard/full_nand_dump.bin of=/dev/mmcblk0
And restore YOUR efs folder using TWRP.
THIS IS A DANGEROUS OPERATION AND I AM NOT RESPONSIBLE FOR ANYTHING THAT GOES WRONG!
---------- Post added at 08:01 PM ---------- Previous post was at 07:57 PM ----------
@ashyx Any more ideas before I go ahead with my evil world domination plan to recover this device?
I wouldnt carry out any risky operations until a full backup can be made with twrp or you may end up with an unrecoverable device.
If twrp cannot backup the system partition then there is an issue with the partition.
Try backup again and post the recovery log, it may contain some relative information.
I have the same issues and have tried eveything. I was rooted and running the latest Pheonix rom on my sm-t800. Last Wednesday (8-10) I starting getting boot loops out of nowhere, no new apps nothing just a daily driver. I've been through everything on here and have gone back to bone stock but to no avail, the boot loops just keep coming. I can connect to wifi and get things set up but if I try to use anything more than 'light usage' the tab starts its boot loops again and rows fits for about 10 minutes and always different timing on the boot. Sometimes it will make it to the Samsung logo, sometime only to Tab S and sometimes about 10 seconds of usage.. I know this isn't helping much but wanted to let you know there are more of us with the same problem. Will be blab to try anything to help said issue.
Exactly the same issue on my LTE version.
Samsung support just asked me 230€ for a new motherboard.
I refused to repair. I think it is related to nand memory..
Hello I have both the 8.4" and 10.5" I updated the 8.4" to Android 5.02 nothing but boot loops my other is still on 442 and I wont be updating it as its working fine. I have been reading a few posts and the problem was right in front of me all the time I have 2 internet connections 2.4 GHZ and 5.0 GHZ if I connect to the 5.0 GHZ I get boot loops but if I stay on 2.4 GHZ no problems what so ever so I may just install a custom rom and my 10.5 tab and stay clear of the faster internet.
srfairhurst said:
Hello I have both the 8.4" and 10.5" I updated the 8.4" to Android 5.02 nothing but boot loops my other is still on 442 and I wont be updating it as its working fine. I have been reading a few posts and the problem was right in front of me all the time I have 2 internet connections 2.4 GHZ and 5.0 GHZ if I connect to the 5.0 GHZ I get boot loops but if I stay on 2.4 GHZ no problems what so ever so I may just install a custom rom and my 10.5 tab and stay clear of the faster internet.
Click to expand...
Click to collapse
Why not just update to Marshmallow? Absolutely no issues for me.
ashyx said:
Why not just update to Marshmallow? Absolutely no issues for me.
Click to expand...
Click to collapse
Now i figured out its the wifi thats causing the problem i will update to android 6.01 or if i can find a good custom rom il risk that.
daina said:
It's the WiFi-only model - SM-T800.
It's kind of weird. I thought it might be some sort of internal memory problem (like the worn Nand pages you mentioned), since almost anything I try to do in TWRP fails (although I was able to flash an entire Custom ROM the one time AND get it booted) -but backing up isn't working, whether it's to internal/external SD. And the fact that I can flash perfectly (subjective term there) well using Odin or Kies tells me that whatever problems the tablet is having, something's getting through.
I'll try a different GAPPS package. Right now, though, TWRP isn't letting me flash hardly anything, and moving files back and forth on this thing is just awful.
AGH - I was so close!
Click to expand...
Click to collapse
DrinkSlinger said:
I have the same issues and have tried eveything. I was rooted and running the latest Pheonix rom on my sm-t800. Last Wednesday (8-10) I starting getting boot loops out of nowhere, no new apps nothing just a daily driver. I've been through everything on here and have gone back to bone stock but to no avail, the boot loops just keep coming. I can connect to wifi and get things set up but if I try to use anything more than 'light usage' the tab starts its boot loops again and rows fits for about 10 minutes and always different timing on the boot. Sometimes it will make it to the Samsung logo, sometime only to Tab S and sometimes about 10 seconds of usage.. I know this isn't helping much but wanted to let you know there are more of us with the same problem. Will be blab to try anything to help said issue.
Click to expand...
Click to collapse
Hello,
and the rest of story??
i can flash TWRP in download mode, and i can intall zip by TWRP , the lineage rom,
but, cant odin flash official md5 file, it stucks on logo.

Categories

Resources