Related
I was trying to upgrade the radio on Universal, somthing I did all the time on my magician. And I think the upgrade worked, I'm not sure. BUt now it won't get out of boot loader mode. If I hard resest and choe clear it says "clearing now" then just goes back to loader mode. I've tried every key combo I know. Power + reset, backlight + power + reset, pulling the battery. Nothing works! Anyone had this issue before? Any suggestions? :?: :?: :?: :?: :?: :?: :!:
That happend to me too. I tryed every thing ... not working ... then i upgrade to the last radio and (soft-reset and power botton) and it worked ... i havent make any upgrade after :lol:
Hi,
the same happened to me, but I solved the problem:
1.) Make the update without any card (SD + SIM) in the phone!
2.) Use the original USB-cable
Now it should work!
Greetings,
Teja
Thanks guys. Pulling out the SIM and the SD did work. I wonder why though? ANyway, thanks again.
A million thanks!!!
I read a lot of replies on other threads, and nothing worked.
Then your suggestion of the Sim + SD worked like a charm.
Thanks a bunch for restoring my expensive brick.
It took a long time for me to find out you've to remove the cards so I was about 2 weeks without my expensive MDA-Pro. And I'm looking forward if it helps anyone to solve the same problem!
Greetings,
Teja
As you've seen, it was my first post here...
Stuck at USB V1.01
New to this. I have a QTEK 9000 Spanish edition. Was upgrading the ROM and the PC for some reason restarted cutting the connection while ROM was in progress. now the PDA is stuck in USB V1.01 screen, tried to hard reset. nothing working. I have read posts about removing SIM and SD cards I have done this. I can not even connect back to the PC, I use the original USB cable, windows pings to suggest a connection is made BUT, now light shows uup on PDA to suggest a connection and Windows mobikle Device Center is not picking up the device. can anyone help me?
Hi, the same problem with me. So at last I am successful and I solve it. I suggest you. First you make update with out any card and then the second step you use the original USB cable.
Try the best.
Bootloader screen stuck!
I dun know i removed cards and hard reset but still its not connecting... show usb when connected to pc and Serial of not down at the bottom show v1.01
Any idea what should i do now?
Hi there!
What key combination gets me into the bootloader?
I've been wondering and searching for a way to upgrade my MDA pro rom. (searching for hours on xda, google and a lot of other specialized sites. Turned out to be dead ends! FRUSTRATING!
I'va had a Qtek S100 before. There was a way to get into the bootloader. And there is a way into the bootloader for the Universal to! YES!
But when i try to push the buttons
on/of
Camera
reset button
i cant get in!
button 1 and 2
reset
the same problem.
I get as far as the pres 0 or X for factory default and exit.
Who can help me? I have the no_id upgrade utility and the ROM ready.
Was there a UUL file which i had to edit before using this upgrade method?
I hope there wil be a good tutorial for this just like the one i have used to upgrade my S100 to an orange rom. (worked great!)
Can anyone help me please
Its BACKLIGHT BUTTON + POWER BUTTON + RESET HOLE
It's better to do this without the SIM and Memory Card connected. Disconnect also the USB Sync Cable.
After entering bootloader, you will see SERIAL written on the screen but the screen has no backlight so you have to look hard.
Then when you plug the Sync Cable, the SERIAL will change to USB then you can run the NoID to update.
Remember the NoID has to be run twice in a row as the first time usually solicits an ID Country error
It Works
Thanks Jorge!
Just those keystrokes helped me a lot. It works just fine and it took me only one run to Initiate the upgrading.
Thanks a lot!
I followed your advice and removed the SD and the phone card.
Yes! now i can experiment with these ROMS.
First Jasjar, later O2 and hoping for the best roms with the best programs.(hoping to find a messenger cab file in the jasjar rom)
As I am planning to do the same, Try all the variants of the ROM's, could you inform me what are the good and bad points of all the different ROM's you used and which did you decide to use finally.
Thanks
HELP !!!!
I turn on my Qtek 9000 and i see SERIAL written and the screen but the screen has no backlight.
How can I boot my Qtek 9000 again without this SERIAL mode ????
Best Regards
Hi Ecraseur,
if You did not do anything else (no upgrading), try ColdReset : Power-switch + Reset hole.
Ruud
If we can boot from Serial/USB is it possible to boot from Mini SD? I'm toying with the idea that by using a Linux Live Disk content on a Mini SD it may be possible to boot into a virtual Linux environment? I know it's going to be uber slow and may not even work but I thought it may be worth a look?
If a Mini SD boot isn't possible do you think it'd work to have one of the smaller USB bootable Linux flavours as the USB boot for the HTC Wizard etc?
HELLO PEOLPLE:
I have just done a very big error with my pda. I wanted just only to reinstallthe same rom to format it and in the beguining of the process my pda stpos and also my computer.
Now my pda is whitout operative sistem and i can't conect it whit activesinc bacause the computer don't recognocise my pda.
WHAT CAN I DO NOW???
PLEASE, COULD SOMEONE HELP ME????
THANKS A LOT.
Screen shows Serial v1.02
Hello
I'm new here, and maybe I have a similar problem as Robertoko69 with my xda mini, I can't do anything, and it doesn't recognize the memory card, could somebody please, please, help? I whas triying to make work the bluetooth... and I have just buyed it today!!
Thanks a lot!
I have a o2 xdaIIs, when I connect the battery, the phone goes to boot model, show me the serial and version v2.07, when connect to usb, connect to the computer, try to reflash the rom, no success. Please help me.
what's the error in the computer screen?
it may help if you searched the forum
using the string that is said in the flashing program.
like Error <number>
I too am suffering from the sam problem.
I was attempting to upgrade the ROM and it failed. Now all I see on the XDA IIs screen is USB at the top and v2.7 at the bottom. This is whilst in the sync cradle.
When out, the USB changes to SERIAL.
Please help as I don't really want to use this as a paper weight
Thank you....
"the USB changes to SERIAL."
when it does that it's ready to recieve a new rom and starting the flash will give it that if it finish successfull that is
thanx for that. I also went scouring the forum and came across a faq about this very problem...
thank you though for taking the time to respond.
I appreciate it !
have a good new year !
Hello,
My HTC 3300 is blocked on Windows start screen.
I have hard reboot my device and un screen with 3 color appear.
When i plug my device with USB cable, my computer play a song to inform my device is well connected.
But when i launch Artemis USPL, a popup appear with the message : "No Device Connected : Would you like to try copying again ?" Yes, No, Cancel.
I'm blocked a this step.
Can you help me ?
Thx
PS: Sorry for my bad english. I'm french guy.
hi guys,
i have the same problem....
I was trying for the first time to upgrade my Artemis!!! I DIDN'T DO THAT!!!!
Please help me!
TNH
USPL only work if you are in WM. It doesn't work at the booloader.
Zecanilis said:
USPL only work if you are in WM. It doesn't work at the booloader.
Click to expand...
Click to collapse
yes... i know
i am reading.... i am looking for a solution.
I read on the POF USPL guide that probably (Unfortunately ) this problem should be caused by same PDAmobiz tool!!!!
i am being funny!!!
yet another bricked artemis owner
Hi…
Newbie as I am I’ll try to explain to you what you should do...I’ve bricked mine artemis()but I think it is more related to hardware issue. You should try this:
1. Download mtty
2. Disable usb in active sync
3. Bring your Artemis to boot loader(pres start record +start phone+ reset)
4. Start mtty, choose usb and you’ll get popup up screen with direct access to your device.
5. Type this in command line of mtty (NOTE-YOU MYST TYPE IT/NO COPY PASTE WORKS)
Password BsaD5SeoA
6. You’ll get %indicator bar on your phone and then you can switch off mtty(do not disconnect your phone!!!)
7. Just start your ROM upgrade (it has to be factory rom if your phone is locked) and you should be ok.
(You need to have downloaded your original factory rom...For me it was O2 UK...do not start until you have it all)
If it fails, or you get some error massages, repeat all from point 2. Or follow on screen instructions...recovery etc...
If it fails,repeat,repeat,repeat....
Hope it will help you and save you from reading s... load of threads!!
P.S.
I’m still trying to bring mine to life….
zikizile said:
Hi…
Newbie as I am I’ll try to explain to you what you should do...I’ve bricked mine artemis()but I think it is more related to hardware issue. You should try this:
1. Download mtty
2. Disable usb in active sync
3. Bring your Artemis to boot loader(pres start record +start phone+ reset)
4. Start mtty, choose usb and you’ll get popup up screen with direct access to your device.
5. Type this in command line of mtty (NOTE-YOU MYST TYPE IT/NO COPY PASTE WORKS)
Password BsaD5SeoA
6. You’ll get %indicator bar on your phone and then you can switch off mtty(do not disconnect your phone!!!)
7. Just start your ROM upgrade (it has to be factory rom if your phone is locked) and you should be ok.
(You need to have downloaded your original factory rom...For me it was O2 UK...do not start until you have it all)
If it fails, or you get some error massages, repeat all from point 2. Or follow on screen instructions...recovery etc...
If it fails,repeat,repeat,repeat....
Hope it will help you and save you from reading s... load of threads!!
P.S.
I’m still trying to bring mine to life….
Click to expand...
Click to collapse
It solved my problem: I've played around with some dll's on my Artemis and it won't boot anymore.
Just one thing: you must type password BsaD5SeoA, cause it's case sensitive.
THANK YOU VERY MUCH!!!
Hi guys,
i fixed my problem!!!!!
i flashed an official ROM (1.12.405) using a SD card (512mb)
now i'm going to work with ARTEMIS_USPL!!!! WOOOOWWWW
owner of a brick called artemis
glad it helped you solve problem...
when I was young I use to poke with programming...
but that was looooong time ago (remember zx spectrum?48 kb ram..haha)now you got it in your pocket(working if you're lucky guy, not like me)
Any way, point is:
never give up!!!!
Yes, I agree with you: NEVER GIVE UP!!!!
I'd like to help you, i'm not expert people on this work...
I just read a lot of good indications on this forum.
Good Luck
Thanks man,
I'm trying to find another motherboard,before I start playing with this one.
Maybe you know where to get one for artemis?(arte 200)Or someone with broken screen not willing to repair it?
cheers,
z