[ROM] [7.1.x] LineageOS 14.1 OFFICIAL Builds (ether)

[ROM] [7.1.x] LineageOS 14.1 OFFICIAL Builds (ether) - Nextbit Robin

Reserved

Reserved

New builds should be starting this week, I woudn't recommend installing any of the April builds and wait for the new builds.
The new builds are based on the Nougat_88 release and includes a completely redone kernel and all the blobs have been updated to the latest official release.
Enjoy it when it's built!

So fresh new start with a fresh new thread?

bmac6996 said:
So fresh new start with a fresh new thread?
Click to expand...
Click to collapse
I guess you could say that, but really mostly the new thread is because the old thread was created by a user who was helping out when none of the maintainers were reading the forums and therefore there was no thread for the device (and thanks for him doing that). Now I'm supporting ether and I wanted to have a thread that I could manage so I can update the information as needed.

Anybody got WiFi hotspot automatically connected on 7.1.2 when Bluetooth connects. I have tried all automate, micro droid, tasked etc cannot get it work. Any help appreciated. Thanks

New nightly is up

Fresh installed the new nightly, seems much snappier than the last one. Thank you dev!!
Edit: LED light still doesn't work. Hopes it works someday!

Are you referring to the single notification LED at the bottom?
Btw which set of Gapps are you using?

iluvatrix said:
Are you referring to the single notification LED at the bottom?
Btw which set of Gapps are you using?
Click to expand...
Click to collapse
Yup. The charging LED that works on stock ROM and I flashed the latest arm64 OpenGapps pico.

Have you tested do all the cores work?

Amazing rom, way better than the older builds. Snappy, smooth, hopefully battery is better.
Sent from my Robin using XDA Labs

iluvatrix said:
Have you tested do all the cores work?
Click to expand...
Click to collapse
All cores are working. Running really smooth.
@crpalmer battery led isn't working and pictures taken with flash enabled are overexposed.

Does the LED show notification?

I just looked at the LEDs and, well, two things.
First, charging is shown by the cloud leds (4 lights on the back) which indicate the percentage charged while plugged in.
Second, well, derp! For some reason the device was configured to disable notifications by default. This should be fixed in the next build (just running a build to do a clean install to verify it) but if you install the first build you will need to enable them manually by going to:
Settings >> Notifications >> Gear icon >> Notification light
and enabling "Notification light".

So the only bug is the overexposed image when camera flash is used?
Sent from my Nextbit Robin using XDA Labs

iluvatrix said:
So the only bug is the overexposed image when camera flash is used?
Sent from my Nextbit Robin using XDA Labs
Click to expand...
Click to collapse
Seems so.

And missing OMS support

crpalmer said:
I just looked at the LEDs and, well, two things.
First, charging is shown by the cloud leds (4 lights on the back) which indicate the percentage charged while plugged in.
Second, well, derp! For some reason the device was configured to disable notifications by default. This should be fixed in the next build (just running a build to do a clean install to verify it) but if you install the first build you will need to enable them manually by going to:
Settings >> Notifications >> Gear icon >> Notification light
and enabling "Notification light".
Click to expand...
Click to collapse
I turned it on last night and it didn't seem to work.
And now, I see the notification light is working!
I thought it should be enabled in a kernel level like Moto devices.
I didn't even realize that the four dots on the back were the lights.
Edit: Notification light keeps on sometimes. Gone after reboot.

Related

[ROM] [7.1.x] LineageOS 14.1 Official (All variants) [NO VoLTE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 14.1 is a free, community built, aftermarket firmware distribution of Android 7.1. (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Requirements
* You must read this post completely
* You must have flashed a stock MM update to update the firmware to a version that is compatible with these builds. Search XDA for the best way to do so for your device.
* You must use the search first and make sure your question has not been answered yet!
* Do NOT ask for the availability of features or if any specific app works - we implement / announce new features when we want to
* Use the latest TWRP available (3.0.2.0), else expect issues
* If you have a problem, do not ask if someone else has it. Post with logs or don't post at all!
Code:
[COLOR=RED][B]Important note:[/B][/COLOR]
Stock Firmware B360 and B370 are known to cause bootloops!
(Generally: if your stock ROM supports VoLTE it is likely that it is also affected!)
All others might work, please do not ask in here how to up- or downgrade!
Known Issues / NOT working / "Bugs"
* Search the thread!
* Anything running VoLTE firmware
* You tell me! (See "Other Issues")
Everything else WORKS, do NOT ask if anything (feature, function, ...) specific is working or not (Search the thread if you want to make sure and if you don't find it: test it yourself)
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates us more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem: boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
LOGS LOGS LOGS!!!!
Press BOTH volume keys + power key - it will vibrate very short. Wait until a notification appears that the bugreport is ready, send it to your mail and post it.
Alternatively go to dev options (press "build number" in "About phone" 7 times to activate it), activate the switch "Shortcut for bugreport", then go to Settings->Keys->Power key and activate it there as well. Long press power-key and then use the new menu item.
Only if rooted:
Use this: SysLog by Tortel
If you have a hard reboot (to the vendor boot logo, not the LineageOS boot logo), use adb or any other file explorer tool to pull a copy of "console-ramoops" after the reboot and provide that.
Code:
adb pull /sys/fs/pstore/console-ramoops
Note: We will not support any kind of modification on the ROM not done by our sources. If you are running XPosed, Kernel Booster or whatever occurs to you, we won't support you in any way. The problem will in every case be treated as the additional softwares' fault (because often it is!)
Changelog (for both, official and unofficial builds!)
* Changelog
Alternatively: (this is the real source, so if you have issues with the link above, check those below)
* Gerrit (All)
* Device tree
* Kernel
Download Links
Again: if you need Google-Apps, install them after flashing the ROM and BEFORE the first reboot
ROM:
Official download site
Google apps addon:
(Note: Not required to run the ROM)
We are using Open GApps (Link) Arm64 version. (make sure to use 64bit when using other packages), others might also be working
Note: In case you want to use any gapps, YOU MUST install the right gapps the first time that you flash a marshmallow ROM. Do not boot with an older gapps or without one and then try to install it later.
Note: If you install a package which replaces the default dialer (mostly "Stock Gapps") you have to go to Settings->Apps->Gear-Icon and set the new dialer as a default telephony app to prevent force closing of apps
Root addon:
Official download site - our device is ARM64
Don't use SuperSU or other tools, otherwise expect bootloops!
Coming from unofficial 14.1 or CM13?
When you already had an unofficial (pre-official) build installed (or are about to upgrade from CM13 the first time), feel free to install the " experimental" build. As we have tightened security, this build is meant to preserve your data during migration. After you have booted it once, please install the next official nightly to complete the procedure (and get rid of the watermark). Please note that this might fail so always take a backup first!
For more info visit this LINK
Update: The experimental builds are gone, you have to clean flash (full wipe) to install LineageOS
Important note
This is a development thread. This means it is NOT your personal support thread.
Questions about anything not related to LineageOS on kiwi will not be accepted nor be answered.
This includes topics like going back to stock, problems with third-party apps (e.g. Snapchat), ...
Also do not encourage people with such questions by answering them but report them to keep the thread clean!
Supported variants
Honor 5X
USA: KIW-L24
Russia: KIW-L23
India: KIW-L22
Europe: KIW-L21
China: KIW-AL10, KIW-AL20, KIW-CL00, KIW-UL00, KIW-TL00 (might have some firmware problems), KIW-TL00H
Honor GR5
Canada: KII-L05
Japan: KII-L22, KII-L21
Your's missing? Contact us!
XDA:DevDB Information
LineageOS 14.1, ROM for the Honor 5X
Contributors
crpalmer, BadDaemon
Source Code: https://github.com/LineageOS/android_kernel_huawei_kiwi
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: No VoLTE firmware! (B360, B370, ...)
Based On: LineageOS
Version Information
Status: No Longer Updated
Created 2016-12-29
Last Updated 2018-12-27

Installation Notes
Installation Notes:
We have tested the upgrade from CM-13.0 (official / unofficial) and a clean install.
It is possible to install LineageOS 14.1 over an existing installation of CM-13.0 by following those steps:
* Download the zip from the link
(* If you have Google Apps installed, you will need to update those as well, download a package for Android 7.1 ARM64 from OpenGApps for example)
* Push zip(s) to device
* Reboot to recovery
* Do a Backup of Boot, System, Data (optional but recommended)
* Choose Install and select the zip of LineageOS 14.1 and read next step before proceeding
* If you want Google Apps, it is required to install them BEFORE you boot into LineageOS the first time
* Install
* Clear cache / dalvik
* Reboot
Please make sure you are aware of the known and the possibility of unknown issues before considering installation!

Reserved

You Are The Best!

Excellent!!! I am off to test. You the man!

So it begins... going to test this over the weekend

Thanks OP. Have been running it since this morning and it's smooth. I installed both "previous" versions (the 498MB one still with CM and the first 496MB one).

Awesome! Now i'll just wait for the fingerprint, camera and network to be fixed!
Awesome work, love it

Dafriss said:
Awesome! Now i'll just wait for the fingerprint, camera and network to be fixed!
Awesome work, love it
Click to expand...
Click to collapse
What exactly do you mean with "network"? SIM 1 and 2 are working, with data. WiFi is also working like a charm.

BadDaemon said:
What exactly do you mean with "network"? SIM 1 and 2 are working, with data. WiFi is also working like a charm.
Click to expand...
Click to collapse
Serious? Mine doesnt! Will flash it again!
Thx for letting it know

MT2-User said:
Thanks OP. Have been running it since this morning and it's smooth. I installed both "previous" versions (the 498MB one still with CM and the first 496MB one).
Click to expand...
Click to collapse
You don't want to be running something that was randomly sitting on my download server earlier today. If your build date is before 3pm est then please download and install what is there now.
Earlier builds had problems.

Would be nice to have the expanded desktop version per app to in the next udate . Expanded desktop works fine but only if i turn it on for everything.
Cant choose it per app yet!

Dafriss said:
Would be nice to have the expanded desktop version per app to in the next udate . Expanded desktop works fine but only if i turn it on for everything.
Cant choose it per app yet!
Click to expand...
Click to collapse
General LineageOS issue, not only on our device. (Have reported it)
Please note that requesting something for any update (especially the "next") is not required, we priorize our work items without that

Awesome. This is really a nice year ender announcement for our device. Don't have time to test though. But will definitely flash once the few bugs are fixed.
Sent from my honor 5X using XDA Labs

Flashed it a few hours ago, everything works great (except the things pointed out in the OP). Thank you so much to @crpalmer and @BadDaemon for bringing Nougat goodness to our device. The amazing devs for this phone have made the US$180 I paid sooo worth it

About the fingerprint sensor, is it a safe guess that unless Huawei releases Nougat for our device, the fingerprint sensor won't work? Or is it something else?

saiarcot895 said:
About the fingerprint sensor, is it a safe guess that unless Huawei releases Nougat for our device, the fingerprint sensor won't work? Or is it something else?
Click to expand...
Click to collapse
At this point all that is safe to assume is that it doesn't work and neither BadDaemon nor I have had a chance to investigate why.

Downloading right now to test. You are the best !!!!
Edit. Installed following the instructions from 1#post (ROM boot,setup. Then gapps and wipes) gapps working perfect. I dont go back to MM for now
Enviado desde mi KIW-L23 mediante Tapatalk

crpalmer said:
At this point all that is safe to assume is that it doesn't work and neither BadDaemon nor I have had a chance to investigate why.
Click to expand...
Click to collapse
Well so happy, sometimes it's worth to wait for something. Both of you guys are awesome. This will now be going to a new era of awesomeness under new name. I hope you guys will be the same. ???

Hotspot fixed?

[ROM] [7.1.x] LineageOS 14.1 OFFICIAL Builds (pme)

Installation Notes
Installation Notes:
We have tested the upgrade from CM-13.0 (official / unofficial) and a clean install.
It is possible to install LineageOS 14.1 over an existing installation of CM-13.0 by following those steps:
* Download the zip from the link
(* If you have Google Apps installed, you will need to update those as well, download a package for Android 7.1 ARM64 from OpenGApps for example)
* Push zip(s) to device
* Reboot to recovery
* Do a Backup of Boot, System, Data (optional but recommended)
* Choose Install and select the zip of LineageOS 14.1 and read next step before proceeding
* If you want Google Apps, it is required to install them BEFORE you boot into LineageOS the first time
* Install
* Clear cache / dalvik
* Reboot
Please make sure you are aware of the known and the possibility of unknown issues before considering installation!

Reserved

Thanks, glad to see the smooth transition, following
Sent from my HTC 10 using Tapatalk

Thank you for bringing Lineage to the HTC 10 so quickly :good:

Rear Camera Force Closes when enabling HDR (? is this a problem on N, I haven't tested it)
Click to expand...
Click to collapse
I'm on T-Mobile and US Unlocked Devices and seems like a fantastic release so far. About the camera, not sure which camera you are using that has HDR for testing. I installed the HTC camera from the store but it doesn't work and I don't know how to install Snap camera. The build in camera does take very good pictures though but no advanced features like slow mo and such.
Edit: I think I experienced the Wifi drop. First the LTE was on and the Wifi symbol had an X, then the WIFI symbol disappeared and the wifi search showed no connections to get on. I'll try to get a log if it happens again.

please merge commit in kernel to disable wakelocks

Can this be dirty flashed over CM ?

jt1975 said:
Can this be dirty flashed over CM ?
Click to expand...
Click to collapse
I wouldn't. Would be best to give it a clean install. It will be fairly similar but best to get a fresh start.
Sent from my HTC 10 using XDA Labs

Works great! 1,000,000 thanks for keeping it up with LineageOS

@crpalmer: Home button is still working only with N firmware, right?
I haven't updated to N yet because of multi-ROM not having clean N support. I am running CM (or lineage now) inside multi-ROM as the secondary.

Home button is working with N firmware...

https://www.androidfilehost.com/?fid=529152257862688644
This patch will fix the fingerprint reader/home button. It's an aroma installer, so chose the firmware you're on (6.x/7.x) and flash.

I flashed over CM, just cache/dalvik wipe, working great so far, thank you for your great work!

jt1975 said:
Can this be dirty flashed over CM ?
Click to expand...
Click to collapse
Yes. Updated post #2 with some instructions for installing that walk through what you need to do with a dirty flash.

Hi,
I was running the latest version of Viper. Made a TWRP Backup and now installed LineageOS for testing after a factory reset. At the first boot my phone has been encrypted automatically.
After testing, I restored my TWRP Backup, but now I am asked for my decryption password after reboot I also cannot use TWRP because of a missing password......
Any helping ideas?????
Greetings,
Thomas

teacherhh said:
Hi,
I was running the latest version of Viper. Made a TWRP Backup and now installed LineageOS for testing after a factory reset. At the first boot my phone has been encrypted automatically.
After testing, I restored my TWRP Backup, but now I am asked for my decryption password after reboot I also cannot use TWRP because of a missing password......
Any helping ideas?????
Greetings,
Thomas
Click to expand...
Click to collapse
Backup your important files and format data under wipe in TWRP. Then flash supersu to decrypt your rom.

Could someone please explain why the phone's current firmware is important? If I install this ROM, perform a full wipe wouldn't just delete everything before installing this new one?

Not sure if this is necessary to change but the build number shows "cm-pme".

Is there a way to disable encryltion before installing?
Or is it better to encrypt manually before?

[ROM][Official][Weekly] LineageOS 14.1 for OnePlus 3/3T

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for official LineageOS 14.1 builds for OnePlus 3/3T. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Known bugs:
Front camera is buggy, due to the buggy camera HAL
Installation:
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (See #2 for details)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm64)
Reboot
A video guide by @ashokmor007
Source code:
https://github.com/lineageos
Credits:
LineageOS Team & Contributors
Code Aurora Forum
......
Download:
https://download.lineageos.org/oneplus3
[/LIST]
XDA:DevDB Information
LineageOS, ROM for the OnePlus 3T
Contributors
dianlujitao, Grarak
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
Version Information
Status: Nightly
Created 2017-02-08
Last Updated 2017-02-16

Please relocate to https://forum.xda-developers.com/oneplus-3/development/rom-cyanogenmod-14-1-oneplus-3-t3496850 @ OnePlus 3 & 3T Cross Device Development

Release note:
New builds (after 2017/1/15) uses F2FS backported from 4.10 kernel, you may meet compatibility problems such as deadlocks, if you do, flash TWRP provided in OP and choose "Wipe -> Format Data" to format(not just wipe) your /data partition, this will clean the entire /data partition, including the emulated sdcard, so don't forget to backup your data before. After that, your data partition will be formatted into ext4, if you want to keep using f2fs, just convert fs type normally in TWRP.
For oneplus3, my unofficial TWRP is recommended, as it's what I use. For 3T, TWRP 3.0.4 is recommended.
20170120 build includes sdcardfs, security fixes and camera fixes&improvements, touch to focus is fixed as well, if it's still not working, clean Snap's data. BTW N kernel source is released now, I'll take days to bring up, don't ask for ETA.
Regarding installation, we recommend that users wipe when switching to LineageOS, and reinstall their gapps. However, we recognize that this can be time consuming, so we are offering an EXPERIMENTAL (read as, if it fails, you’ll have to wipe anyways) solution. Visit http://lineageos.org/Update-and-Build-Prep/for more details
Started from lineage-14.1-20170207-nightly-oneplus3-signed.zip, we provide unified builds for both 3&3T, and you need to install certain firmware to pass the TrustZone assertion. Currently they're the OxygenOS 4.0.2 ones. As oneplus won't update them every time new OTAs are rolling out, firmware from other versions might also pass the assertion.
FAQs:
My status bar quick pulldown and notification slider are broken, why?
See https://github.com/opengapps/opengapps/wiki/Notes-for-CMSetupWizard
Why the builds are unified?
Tell me the difference between OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883 and OnePlus3TOxygen_28_OTA_039_all_1701140132_de9036f11e2246a8, why not?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I'm really excited that Lineage OS has been released officialy for our 3T
Just one small question
Do OTAs work?
Thanks

I tried the front camera, and actually it's working nice. (Snap Camera)
By the way, great ROM and glad to see it on 3T!

subscribed
question
dm-verity and forced encryption disabler still needed ?

So is this official official official? Lol. I ask because there are so many official and unofficial of everything on this one plus Fred that I am overwhelmed and confused at times

poor2rican1 said:
So is this official official official? Lol. I ask because there are so many official and unofficial of everything on this one plus Fred that I am overwhelmed and confused at times
Click to expand...
Click to collapse
Yes, it is. As you can see, in the first post there is the LineageOS official download page.
EDIT: @dianlujitao There is an error in the first post, in the disclaimer. Warranty is still valid.

Sweet ty

xpissio said:
I tried the front camera, and actually it's working nice. (Snap Camera)
By the way, great ROM and glad to see it on 3T!
Click to expand...
Click to collapse
Front camera is working?
And also what about OTA?

The download link refers to the OnePlus 3 download page, not the OnePlus 3T. Where can I find the downloads for the 3T?

Will the OIS and EIS work?

bmxje said:
The download link refers to the OnePlus 3 download page, not the OnePlus 3T. Where can I find the downloads for the 3T?
Click to expand...
Click to collapse
The link is correct. The zip file works for both - the OP3 and the OP3T. It's unified

Reeb_Lam said:
Front camera is working?
And also what about OTA?
Click to expand...
Click to collapse
I wrote "It's working nice".... So, yes, it works.
I can't try OTA because... there's not a new build.

xpissio said:
I wrote "It's working nice".... So, yes, it works.
I can't try OTA because... there's not a new build.
Click to expand...
Click to collapse
Lol

Good evening possible another link because impossible to download the source thank you
edit: resolved

Thanks a lot for this! Working good!
Waiting for notification slider and front camera fix. And will give donation later ^_^

Finger reader not working very well when charging
Thanks for very good working!

Live Display (automatic) not working here.
EDIT: Rebooted and now it works.
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

I am trying to switch to the official LOS nightly from 07 Feb, coming from this unofficial rom which worked perfectly: https://forum.xda-developers.com/oneplus-3t/development/rom-unified-lineageos-cm14-1-t3525551
I did a clean install, flashed twrp 3.0.4-1, then the dm-verity and forced encryption disabler zip (version 5.1), then the LOS build, open-gapps nano package (from 8th of Feb) and the LOS root addon.
Tried numerous times now, and different things: formatting data as ext4, flashing the OOS before doing the clean install, pico instead of nano gapps. Yet the same thing keeps happening to me:
Everything works fine first, yet after encrypting the phone and turning privacy guard on and to quite strict settings for google services, the phone freezes after entering the SIM pin-code during boot. Won't start anymore at all after that.
Tried again today without encrypting the phone and just turning on privacy guard for all services starting with "Google ...", whereas I selected ask everytime rather than denied. Same thing happened, so I believe now it is a Gapps related issue.
I am now back on the abovementioned unofficial build, which works just fine with exactly the same set-up which leaves me puzzled as this build is supposed to be 99,99% pure LOS.
As some people are reporting the nightly is working fine for them: am I doing something wrong? Is anybody else having similar issue? Anybody have an idea how to fix it?
Thanks in advance for any help, well appreciated!

[OFFICIAL] [Ten] Lineage 17.1

Reserved
Unofficial builds deleted on April 2nd 2020

Reserved

Hmm

was eagerly waiting for lineage 17 update, downloading,thanks so much dev, let's hope we'll get an official update soon

Huge thanks to the developer, very exciting to have Android 10 up and running on my device, with encryption in place!
PS: I couldn't get the beta version of Open GApps to flash in TWRP - It complained about a missing file in the ROM - I didn't make a note of what it said but I tried BitGApps instead and that worked fine: https://bitgapps.cf/arm64/Q/

P650SE said:
Huge thanks to the developer, very exciting to have Android 10 up and running on my device, with encryption in place!
PS: I couldn't get the beta version of Open GApps to flash in TWRP - It complained about a missing file in the ROM - I didn't make a note of what it said but I tried BitGApps instead and that worked fine: https://bitgapps.cf/arm64/Q/
Click to expand...
Click to collapse
The 20200115 gapps beta build was the problem. The next beta gapps should have it fixed.

so far very stable, everything works fine,the ui is almost perfectly smooth,but sometimes an app takes a milliseconds to get that opening animation running,lineage 16 is perfect in that ,when you tap an app it instantly responded,it needs a little work,but msn is it the best 10 rom out there,smoothest , lineage is the best

Thanks for the rom!
I'm having some issues...
1 - unable to hide apps in trebuchet
2 - unable to expand desktop
For now, only it.. if i found something i will update the reply...

I have an update about the problem I and another user reported in the TG group, where pictures and music were not appearing in the stock apps in Lineage 17 - After a couple of days of using this ROM my pictures and music have randomly started to appear in the stock apps. For some reason it took a few days for them to show up!

P650SE said:
I have an update about the problem I and another user reported in the TG group, where pictures and music were not appearing in the stock apps in Lineage 17 - After a couple of days of using this ROM my pictures and music have randomly started to appear in the stock apps. For some reason it took a few days for them to show up!
Click to expand...
Click to collapse
media scanner was not running,just download 7zipper and run media scanner

I don't see adaptive battery in the settings

Brilliant Rom. Very fast and very good battery. I like him.

Anybody tried any sound mods on this rom...i got bootloop from vuper4android.

redchilis said:
Excellent!
Noticeable changes at first glance:
- Accent color has been replaced by Styles and Wallpaper - Very Cool
- Dark mode toggle in Display
- Option to allow apps to use location only when app is being used (very iOS like and privacy friendly)
- In TWRP on mounting system, LOS apps like AudioFX seem to be in /system/system/priv-app earlier used to be in /system/priv-app
- Encryption works fine
Bugs
- Adding alarm, crashes the clock app
- Changing notification in any app (Signal, Whatsapp) crashes app
Did a clean install using
lineage-17.1-20200114-UNOFFICIAL-z2_plus.zip
open_gapps-arm64-10.0-pico-20200131.zip
Click to expand...
Click to collapse
Is there a way to remove unwanted system apps. When i remove app using link2sd app i got a bootloop.

Can GSI's be flashed on this ROM...??

redchilis said:
Based on this article, "devices" are GSI flashable or not and not ROM's
Based on this list of GSI flashable devices, I'd say the Zuk Z2 Plus isn't GSI flashable ASAIK
I could be wrong, just did a Google search.
Click to expand...
Click to collapse
But, I've flashed many GSI's successfully... So z2 plus is a GSI flashable.
And to flash any GSI we need a proper treble rom(with a good vendor which actually supports flashing any GSI..)..AFAIK

I'm not sure whether it's a bug or not. I tried the new internal audio recording feature of Android 10 with com.kimcy929.screenrecorder, it's not working, nothing but silence was recorded.
Edit: It's working with the browser (with slight lags though). However, it didn't work while playing sound with the built-in file manager.

manashz1 said:
media scanner was not running,just download 7zipper and run media scanner
Click to expand...
Click to collapse
Bruh that PE dev damaged gis phone now give me a solution

LineageOS 17.1 official released
https://download.lineageos.org/z2_plus
note: removed

Development [ROM][13.0][ENCRYPTION] Official LineageOS 20 for A52s 5G

Unofficial changelogs
08 June 2023
Code:
-Latest LineageOS sources (still May security patch, June one hasn't been merged yet)
-Limited sensing range for proximity sensor
-Initial M52 5G support
-Dynamically disable/re-enable night light and extra dim during unlocking with FOD
-Imported task_profiles.json for generally smoother performance (thanks to @PauloWesley)
-Enforcing SeLinux!
-Heavily improved vibrations
-Fixed phone calls with Bluetooth Headphones/Earphones/Smartwatches/etc
26 April 2023
Code:
-Dynamically link correct IPA/WPSS firmware for all different bootloader revisions to fix Wifi
-Correctly show "Charging slowly" and "Charging rapidly" on lockscreen
-Made lineage recovery work by shipping prebuilt kernel and modules
19 April 2023
Code:
-Adjusted powerhint for better performance and battery life
-Temporarily switched to prebuilt camera provider to fix camera lags and crashes at the cost of macro camera
-Fixed missing hardware accerleration for colours (Night light, Color Modes, Reading Mode)
-Fixed laggy/non-hardware accelerated video playback
-Switched to R RIL blobs to fix signal strength indicator
-Added single tap to show AOD setting
-Prevent booting failures ("SECURE CHECK FAIL: modem")
11 April 2023
Code:
-Initial release

Good work!

Great work, I'm on One UI 5.1 right now. Can I flash it, nevertheless?
And some screenshots of the ROM would be really appreciated as well.

What a journey, feels great to witness the evolution of it

This is the start of many things to come! I appreciate @Simon1511 effort unto this.

That's awesome, finally.
Bugs: Noticed the camera app is really buggy, when I switch the video resolution/FPS, camera shows a black screen or a frozen picture, also switching from front/back camera and other things also glitch up.

Camera is black as shown above, and identify songs playing nearby doesn't seem to want to turn on either

This is a huge milestone for the development of ROMs for this phone.

sim toolkit kinda broken still

Hi guys
How is Battery life on this rom ?
Performance for gaming ?
Thanks for answering

I have Android 13 currently installed, it's a GMS firmware, based on Google's Experience ROM. I tried to install the ROM but got message that it's not android 13 even though I know it's 13. Is it caused by missing oneUI? If so what are my options to get this ROM installed? Go back to Samsung's original ROM? Is it even possible? Thanks

rb1979 said:
I have Android 13 currently installed, it's a GMS firmware, based on Google's Experience ROM. I tried to install the ROM but got message that it's not android 13 even though I know it's 13. Is it caused by missing oneUI? If so what are my options to get this ROM installed? Go back to Samsung's original ROM? Is it even possible? Thanks
Click to expand...
Click to collapse
My ROM does require Android 13 firmware, not just any Android 13 ROM.
So yes, you'll have to return to stock ROM to flash the latest firmware available for you phone and then install LineageOS.

Thank you for your effort. Now I'm really considering buying this phone.

Hi,
I have installed this ROM and when connected to a WifI i get the msg: "Connected/No internet access".
Googling around I got I had to check with Termux the value of this variable:
> settings get global captive_portal_server
> null
I understand the value of not using the default google owned http://connectivitycheck.gstatic.com but cannot this value be set to some site more privacy-aware/FOSS/non-tracking site rather than NULL ?
( read about that here : https://forum.xda-developers.com/t/guide-how-to-avoid-the-captive-portal-checkin-to-google.3927561/)

I found these strange languages below when adding a language. Also, I installed F-droid app and then Aurora Store from F-droid repository. But Aurora Store keeps closing, it doesn't work with this ROM. I'm not sure if this is Aurora issue or something in this ROM that stops Aurora from running.

I can confirm that the camera app stops working shortly after being in use. It starts up, it allows me to take a photo but once I take a look at taken photo and go back to taking pictures again the camera screen is black.

in settings -> display -> colors, there are 4 options to choose from and sample pictures. are these pictures expected to change in color to exemplify the effect of 4 options? if yes then in my installation this doesn't work. a change in options is not reflected on the images.

geos_ said:
I can confirm that the camera app stops working shortly after being in use. It starts up, it allows me to take a photo but once I take a look at taken photo and go back to taking pictures again the camera screen is black.
Click to expand...
Click to collapse
I'm working on it.
geos_ said:
in settings -> display -> colors, there are 4 options to choose from and sample pictures. are these pictures expected to change in color to exemplify the effect of 4 options? if yes then in my installation this doesn't work. a change in options is not reflected on the images.
Click to expand...
Click to collapse
As mentioned in post #1 this is currently broken.

Develop Bugs

welcome