Related
hello guys..
i'm a new to all this android stuff. i have a gionee p3 stucked at boot screen.. with stock recovery but i have a nandroid backup which i had made earlier using carliv touch recovery based on CWM.. now i want to restore the backup but i cant install cwm or any update from recovery so that can restore the backup... i have also tried 'fastboot flash recovery recovery.img' but it gives an error 'partiton recovery not support flash... i have also tried this"" [HOWTO]- Performing a Nandroid Restore Manually using ADB"" http://forum.xda-developers.com/showthread.php?t=614016 but i got error after step 13 "nandroid-mobile.sh not found" what do i do now please help me.....thanks for giving me time....HELP...:crying::crying:
jackey31 said:
hello guys..
i'm a new to all this android stuff. i have a gionee p3 stucked at boot screen.. with stock recovery but i have a nandroid backup which i had made earlier using carliv touch recovery based on CWM.. now i want to restore the backup but i cant install cwm or any update from recovery so that can restore the backup... i have also tried 'fastboot flash recovery recovery.img' but it gives an error 'partiton recovery not support flash... i have also tried this"" [HOWTO]- Performing a Nandroid Restore Manually using ADB"" http://forum.xda-developers.com/showthread.php?t=614016 but i got error after step 13 "nandroid-mobile.sh not found" what do i do now please help me.....thanks for giving me time....HELP...:crying::crying:
Click to expand...
Click to collapse
Use Carliv touch recovery port tool to create the recovery for device.
Place the recovery.img to the Carliv Port tool folder.
Select manually and then it will prepare the recovery for your device.
It can auto-flash the recovery to the device.
But if it somehow fails, you try to use the SP Flash tool to flash the Carliv Touch Recovery.
Just simply load the scatter file of your device.
Check recovery and browse to the recovery prepared by Carliv Port tool.
Then flash the recovery.
Your problem should solved now.
I recommend after this you to do backup via MTK Droid Tool and prepare it for flash tool.
Hit Thanks if I Helped U
Can u plz explain a little more how to use carliv port tool and sp flash tool.. And what is scatter file and where do i find that for my device.. Stock rom for my device is not available on the net yet..
jackey31 said:
Can u plz explain a little more how to use carliv port tool and sp flash tool.. And what is scatter file and where do i find that for my device.. Stock rom for my device is not available on the net yet..
Click to expand...
Click to collapse
Im sorry, my bad.
I thought its a media-tek device but it is not.
SP Flash tool and MTK droid tools won't work for your device.
I'l research on the internet and will let you know.
I have finally found a rom. Zip for p3 and i have also created the scatter file using mtk droid tool my device is mt6582.. I dont know how to flash plz help me and guide me step by step...
jackey31 said:
I have finally found a rom. Zip for p3 and i have also created the scatter file using mtk droid tool my device is mt6582.. I dont know how to flash plz help me and guide me step by step...
Click to expand...
Click to collapse
Okay I can help u surely now.
Do you have custom recovery in your device your device?
If you dont have a custom recovery installed you will obviously need to make one and then flash it.
You need to have the recovery.img of your device.
Download Carliv Touch Recovery Port Tool (Google it).
Extract the files to desktop.
Execute the Carliv Port Tool.
Paste the recovery.img of your device to the required folder.
The port tool will then prepare recovery for your device.
Once recovery is prepared, open SP Flash Tool.
Load the scatter file of your device.
Check the recovery option and then select the recovery prepared by Carliv port tool.
And then flash the recovery.
(read a guide how to flash recovery using sp flash tool for step by step tutorial).
Once recovery is flashed, reboot to the recovery.
Install the zip you mentioned you have for your device.
Now you should be able to boot into your new android system.
Shivam Kumar Jha said:
Okay I can help u surely now.
Do you have custom recovery in your device your device?
If you dont have a custom recovery installed you will obviously need to make one and then flash it.
You need to have the recovery.img of your device.
Download Carliv Touch Recovery Port Tool (Google it).
Extract the files to desktop.
Execute the Carliv Port Tool.
Paste the recovery.img of your device to the required folder.
The port tool will then prepare recovery for your device.
Once recovery is prepared, open SP Flash Tool.
Load the scatter file of your device.
Check the recovery option and then select the recovery prepared by Carliv port tool.
And then flash the recovery.
(read a guide how to flash recovery using sp flash tool for step by step tutorial).
Once recovery is flashed, reboot to the recovery.
Install the zip you mentioned you have for your device.
Now you should be able to boot into your new android system.
Click to expand...
Click to collapse
Buddy thnks for d Info...,
It helpd me 2 repair my softbricked phone.!!,,
thnq so mch
wheres the rom please??
jackey31 said:
I have finally found a rom. Zip for p3 and i have also created the scatter file using mtk droid tool my device is mt6582.. I dont know how to flash plz help me and guide me step by step...
Click to expand...
Click to collapse
hiya jack im stuck in your same situation stuck on the gionee bootlogo. i need the update rom you mentioned above. please post a link in the direction i can pick it. thanks in advance.
best regards
ndagi
How can this help a soft bricked phone which is not goin anywhere on power up ?
I have a gionee p3 n I seem to have softbricked it tryin to flash a ROM on it n now its stuck at the Gionee logo if I power it up. Could u tell me how n wat I dowit it ???
trichards440 said:
Buddy thnks for d Info...,
It helpd me 2 repair my softbricked phone.!!,,
thnq so mch
Click to expand...
Click to collapse
Shivam Kumar Jha said:
Okay I can help u surely now.
Do you have custom recovery in your device your device?
If you dont have a custom recovery installed you will obviously need to make one and then flash it.
You need to have the recovery.img of your device.
Download Carliv Touch Recovery Port Tool (Google it).
Extract the files to desktop.
Execute the Carliv Port Tool.
Paste the recovery.img of your device to the required folder.
The port tool will then prepare recovery for your device.
Once recovery is prepared, open SP Flash Tool.
Load the scatter file of your device.
Check the recovery option and then select the recovery prepared by Carliv port tool.
And then flash the recovery.
(read a guide how to flash recovery using sp flash tool for step by step tutorial).
Once recovery is flashed, reboot to the recovery.
Install the zip you mentioned you have for your device.
Now you should be able to boot into your new android system.
Click to expand...
Click to collapse
trichards440 said:
Buddy thnks for d Info...,
It helpd me 2 repair my softbricked phone.!!,,
thnq so mch
Click to expand...
Click to collapse
thnq so mch 4 d help Shivam.. it helped me in some simlr case..
thanku :cyclops: :good:
jackey31 said:
I have finally found a rom. Zip for p3 and i have also created the scatter file using mtk droid tool my device is mt6582.. I dont know how to flash plz help me and guide me step by step...
Click to expand...
Click to collapse
Would really help to know what files are contained in that ROM.zip file because for SP flash tool, you'll need scatter file and other files like system.img , boot.img etc
Plzzz Help Me...Friends Im New To this....
I've Gionee P3, I've rooted by using kingroot, and I've installed xposed installer,
And opened it then I open framework andbi clicked ins all/update but it is not correctly installed so I searched on Google how to install xposed installer on Gionee P3, I found one solution that is given in this link:
( I can't put link here) so plz search how to install xposed installer on Gionee P3? And you will see a video....
Now the problem is I've done all procedures on that video finally I opened xposed installer app and clicked install/update, it asked reboot your mobile and I clicked OK, then it reboots but suddenly it shows "Unfortunately Launcher has stopped" I've reset my mobile but still I'm having that problem.. Even I slide down and clicked settings that also shows "Unfortunately settings has stopped" Everything Has stopped on my mobile... So plz help me... How to solve this problem? Plz plz plz help me.... Thank-you....
Try installing xposed again and then uninstall... Do u have cwm installed? @Parthisathish
please help me....
my gionee p3 in unable power on after installed a new rom.....
help
I have gionee p3 and its bricked..
I tried everything its not connecting to sp tools and i cant get into recovery mode also please help me guys sorry for bad english
---------- Post added at 05:52 PM ---------- Previous post was at 05:48 PM ----------
jackey31 said:
I have finally found a rom. Zip for p3 and i have also created the scatter file using mtk droid tool my device is mt6582.. I dont know how to flash plz help me and guide me step by step...
Click to expand...
Click to collapse
Hey bro i have same problem and same mobile please send me the files you got rom.zip and scatter files
my gionee p3 s is unable to power on after install flashyfy app ........please help ..me what can i do now that days.....
Dear friends, help me please. I have Samsung J7 (J7008) from China Mobile and it has no gapps in it. I have tried to flash twrp recovery (twrp-2.8.7.0-j7elte.img) with odin, but it fails with file size error. Also recovery 3e could update from external card - it says: Update from external storage is disable.
Any ideas?
Need your help, please.
CPU is Cortex-A53 8 core ARMv7 (VFPv4, NEON)
Hello, I'm having exactly the same problem. I can root the terminal unlocking device with CROM service and using: https://autoroot.chainfire.euBUT I cannot install gapps since the common method is to flash it with a custom recovery BUT I cannot do it due to the File size /Binary size is too larger error. Any advice would be really helpful on how to flash TWRP or how to install gapps considering that the device is rooted.
Thanks in advance.
Can you share the twrp file for j7008 chn version?
Thanks
Phantom Lord said:
Dear friends, help me please. I have Samsung J7 (J7008)
Click to expand...
Click to collapse
Hi!
I bricked my yureka plus by accidentally flashing old yureka plus yu5510a (CM variant)'s ROM using YGDP tool, it didnt flash at all.. showed error at 1%.
This variant of Yureka has different fastboot than others.
I cant find stock rom for this variant.
Now it doesnt boot and shows Nothing but text "Download Failed Images - aboot"
Please help!!
PastVision;7138145https://androidmtk.com/download-yu-stock-rom-for-all-models6 said:
Hi!
I bricked my yureka plus by accidentally flashing old yureka plus yu5510a (CM variant)'s ROM using YGDP tool, it didnt flash at all.. showed error at 1%.
This variant of Yureka has different fastboot than others.
I cant find stock rom for this variant.
Now it doesnt boot and shows Nothing but text "Download Failed Images - aboot"
Please help!!
Click to expand...
Click to collapse
Here u will get the stock rom for yureka :good:
https://androidmtk.com/download-yu-stock-rom-for-all-models
Need help with soft Bricked YurekaPlus YU5510A stock android lollipop veriant
What a solution for that? Am trying to stock rom flashing for this device (YU5510A)-yureka plus android- varient i also face this problem on flashing eror:: "Download Failed Images - aboot"
Please help!!
vin982233 said:
What a solution for that? Am trying to stock rom flashing for this device (YU5510A)-yureka plus android- varient i also face this problem on flashing eror:: "Download Failed Images - aboot"
Please help!!
Click to expand...
Click to collapse
Hey dude,
You'll not get YU5510A stock android lollipop variant anywhere. Coz it does not run on CM. Its based on YU's OEM ROM.
But luckily since its just s soft brick, You have 2 options Root and flash CM 12.1 ROM or If you want Flash the latest 14.1 Lineage OS.
DO not flash the 12.1 COS fastboot for Yureka, else you'll get into trouble.
vin982233 said:
What a solution for that? Am trying to stock rom flashing for this device (YU5510A)-yureka plus android- varient i also face this problem on flashing eror:: "Download Failed Images - aboot"
Please help!!
Click to expand...
Click to collapse
1.Download the LOLLIPOP factory image fastboot package for YU YUREKA from Here
2.Extract the contents of the fastboot package into a folder.
3.Download this flashing tools package
4.Extract the contents of the flashing tools zip into the same folder
5.To make sure, check that system.img, boot.img etc files are in the same folder as flash-all.bat, fastboot.exe etc
6.Connect your phone in fastboot mode, steps for which are : -
a. Power off your phone
b. Press and hold the Volume Up key
c. With the Volume Up key, connect the phone to your PC/Laptop with USB cable
d. You can let go off the Volume Up key when Fastboot Mode is displayed on the screen
7.Run flash-all.bat by double clicking on it.
8.A command window will open and flashing procedure will start
9.DO NOT disconnect the device during flashing procedure
10.The command window will close after the flashing process is over.
11.Disconnect the USB cable, and boot the phone normally by long pressing the Power button.
For links email me [email protected]
PastVision said:
Hi!
I bricked my yureka plus by accidentally flashing old yureka plus yu5510a (CM variant)'s ROM using YGDP tool, it didnt flash at all.. showed error at 1%.
This variant of Yureka has different fastboot than others.
I cant find stock rom for this variant.
Now it doesnt boot and shows Nothing but text "Download Failed Images - aboot"
Please help!!
Click to expand...
Click to collapse
Download ygdp version 3.98 from ygdp site
Select config tab
Select CBP file from firmware folder (www.firmwarefile.com)
Attach mobile in fastboot ( Volume + & hold then attach data cable with PC
Now press start
Wait until 100%
Then press stop
Your device will be unbrick
My Yureka plus on android yu5510a(stock android phone) hard bricked...
My YU5510A stock android hard bricked i have stock rom and everything but my yureka plus is not getting detected by my laptop(I am thinking qhusb bulk driver,qhusb qdloader 9008 and 9006 mode drivers is needed but i don't have that please reply the files link in reply). I have also tried shorting pins method but it didn't work for me. Please help me out...
Kumar Harshdeep said:
My YU5510A stock android hard bricked i have stock rom and everything but my yureka plus is not getting detected by my laptop(I am thinking qhusb bulk driver,qhusb qdloader 9008 and 9006 mode drivers is needed but i don't have that please reply the files link in reply). I have also tried shorting pins method but it didn't work for me. Please help me out...
Click to expand...
Click to collapse
http://www.mediafire.com/file/8g9v5fsslnbf1r6/Qualcomm+Driver+Setup.zip
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
Good luck
I have also a similar case. I tried to flash with YGDB tool, but it did not flash. It stops after 1%. The phone displays "download failed images -aboot". The phone model is Yureka Plus Yu5510a p0. Does this mean the phone is hardbricked?
Help please!
wawnature said:
I have also a similar case. I tried to flash with YGDB tool, but it did not flash. It stops after 1%. The phone displays "download failed images -aboot". The phone model is Yureka Plus Yu5510a p0. Does this mean the phone is hardbricked?
Help please!
Click to expand...
Click to collapse
Try to flash TWRP using fastboot
If it flashed successfully then your problem got resolved.
It shows aboot failed may be there is problem with CBP file.
Try to flash other CBP file ( try 1st version)
If not solved
Go-to yuplaydev and download latest fastboot package and flash using fastboot
Follow given steps in official site.
Good luck
Same problem as above
I tried to flash stock rom on yu5510 bt unknowingly i did yu5510a with YGDP Tool in doing show it shown error on 2% & it changed my recovery from TWRP to yu5510a recovery , and fastboot . and it locked bootloader too now i cant unlock bootloader and cant install any rom .
Pls help is there any option to revert back to yu5510 bootloader
Pls help
Thanks
Swetankanand said:
Same problem as above
I tried to flash stock rom on yu5510 bt unknowingly i did yu5510a with YGDP Tool in doing show it shown error on 2% & it changed my recovery from TWRP to yu5510a recovery , and fastboot . and it locked bootloader too now i cant unlock bootloader and cant install any rom .
Pls help is there any option to revert back to yu5510 bootloader
Pls help
Thanks
Click to expand...
Click to collapse
Flash original stock firmware
Find it at www.firmwarefile.com
Choose actual model
Install first version.
Check ygdp tool version also 3.98 is working perfectly.
All other versions creates bugs, hangs in between or flash failed etc.
Cross check it
Hello ..... I updated my twrp recovery and flash it using official twrp app after that i opened my recovery and it went to fastboot and when ever i switched it on it open fastboot mode and my android debugging is also off ..plz guys hepls me how can i open my phone back
sibghatkhan said:
Hello ..... I updated my twrp recovery and flash it using official twrp app after that i opened my recovery and it went to fastboot and when ever i switched it on it open fastboot mode and my android debugging is also off ..plz guys hepls me how can i open my phone back
Click to expand...
Click to collapse
Download older version ( previous using)
Flash through fastboot and boot into recovery using fastboot
yu 5510a all problem solve
change your yu5510a battery and flash with ygdp tool 100% tested
Hi,
my Leeco Le1 Pro is stuck in Recover Bootloop, always showing just the Penguin icon. I tried to flash it, and it got bricked.
I was trying to re-flash it with Flash Tools, but NONE of the roms I tried (Stock rom, Cuoco & BetaHydri) has the necesary scatter file.
What can I do?
Thanks for helping!
Cheers, sound67
sound67 said:
Hi,
my Leeco Le1 Pro is stuck in Recover Bootloop, always showing just the Penguin icon. I tried to flash it, and it got bricked.
I was trying to re-flash it with Flash Tools, but NONE of the roms I tried (Stock rom, Cuoco & BetaHydri) has the necesary scatter file.
What can I do?
Thanks for helping!
Cheers, sound67
Click to expand...
Click to collapse
how about your phone ? i can help you to unbrick.
rom and tool
type in google geabest rom letv x800, you will find stock rom and a tool for flashing
Follow this step.https://www.youtube.com/watch?v=NpsuTSq1ksQ&t=1s
It's been three years since i changed phones and I naively thought that things had gotten easier.
But nope. Still a mess of stiching together various incomplete "guides" from around the web only
to end up with a phone stuck in a boot-loop.
It's a Galaxy S9. Using Odin I've been able to install TWRP 3.3.1-0.
With that I tried installing both Carbon ROM as well as Havoc OS each followed by Open Gapps 8.
In some of the "guides" there was mentions of no-verity, so I've tried adding that in various steps.
Still, the only thing that works reliably is power+bixby+up to enter twrp. It's the only way I've found
to power down the phone.
Very grateful for any suggestion.
I've thought about installing the ROM using Odin, but I'm afraid that I would lose twrp.
From TWRP boot into download mode and use Odin to flash stock.
Or download soldier ROM and flash that in TWRP. It's based on stock ROM.
basicreece said:
From TWRP boot into download mode and use Odin to flash stock.
Or download soldier ROM and flash that in TWRP. It's based on stock ROM.
Click to expand...
Click to collapse
Thanks for taking the time to reply - I appreciate it!
Just to be suuuper clear: Should I flash the ROM the same way as I did twrp? Option AP and F. Reset time?
And why stock ROM? That's where I came from. Ultimately I want a custom ROM (preferably Carbon or Havoc).
Is this a step towards that?
Sam Sunk said:
Thanks for taking the time to reply - I appreciate it!
Just to be suuuper clear: Should I flash the ROM the same way as I did twrp? Option AP and F. Reset time?
And why stock ROM? That's where I came from. Ultimately I want a custom ROM (preferably Carbon or Havoc).
Is this a step towards that?
Click to expand...
Click to collapse
Flashing stock will return your phone to the way it was when you bought it, having to flash TWRP etc all over again
When flashing stock you flash all 4 sections together and do not change any settings in Odin
CSC = Reset phone
HOME CSC = Do not reset
Only use one or the other
You will need to use CSC if you have TWRP / Custom installed
If you are wanting a custom ROM flashed from TWRP you should wait for someone else who knows why it won't flash to help you as I have just kept stock on my S9 so don't know what's wrong
You do know you flash the custom ROM zip using TWRP right? Copying it to your SD card then choosing it from TWRP itself, not using Odin
*Detection* said:
You do know you flash the custom ROM zip using TWRP right? Copying it to your SD card then choosing it from TWRP itself, not using Odin
Click to expand...
Click to collapse
That's exactly what I did. I used Odin to install twrp and then tried to install the custom ROM with twrp. That's when the wheels came off and the phone got stuck booting.
So what do I do to install a custom ROM on my S9?
I'm positive I've followed every step of the guides, but there's always the feeling that they are written for AnyAndroidPhone (TM) and that there's some device-specific quirk that's left out.
Sam Sunk said:
So what do I do to install a custom ROM on my S9?
I'm positive I've followed every step of the guides, but there's always the feeling that they are written for AnyAndroidPhone (TM) and that there's some device-specific quirk that's left out.
Click to expand...
Click to collapse
Then you should follow the guides on this XDA S9 forum instead, then you know they are for the S9
Sam Sunk said:
So what do I do to install a custom ROM on my S9?
I'm positive I've followed every step of the guides, but there's always the feeling that they are written for AnyAndroidPhone (TM) and that there's some device-specific quirk that's left out.
Click to expand...
Click to collapse
you still bricked?
In TWRP did the internal storage maybe say 0mb? Tat happens when you dont abort the factory reset after OEM unlock. If it is that than just go to advanced wipe, pormat your data to fat2 and then back to fat4
Hey there, I had the exact same problem over the past 2 days - so I feel your frustration.
I have a 9604f (galaxy s9) , and there are different types so you may have to see if yours is different. I also used ressurrection remix OS. Short version is:
1. Get resurrection remix (final version for starlte)
2. Get gapps (for 8.1 arm64)
3. Get magisk
The above 3 are all on the post for the official resurrection remix on this site with the header -[ROM] [OFFICIAL] [6/01/18] ResurrectionRemix 6.0 for S9/S9+ (Exynos)
4. Download the BRE5 vendor. I used a link that went to a mega.nz site and it worked. So I'm sure you'll be able to find one. I can't post links cause this is my first post.
5. Boot into twrp
6. Format data in wipe section of twrp
7. Wipe dalvik, cache, data, system.
8. Install in this order -do not reboot or wipe anything. Just install.
(I) BRE5 vendor
(II) resurrection remix ROM
(III) gapps
9. DONT WIPE cache, and reboot into the OS
10. If you want root -just go back into twrp once you have set up google, apps etc. And then install the magisk zip.
update
Not bricked any more.
The advice from @basicreece to install soldier worked. I made a second attempt to install Carbon afterwards but that resulted again in a twrp-only device. Now I'm back on soldier.
Perhaps I'll give @Madsikhey's instructions a go later.
To show my gratitude for all the help in times of darkness I'd like to give back and I'll let @basicreece decide:
1. Donation to XDA
2. Donation to EFF
3. A beer/coffee for yourself (PayPal)
Answer me in a PM.
Madsikhey said:
Hey there, I had the exact same problem over the past 2 days - so I feel your frustration.
I have a 9604f (galaxy s9) , and there are different types so you may have to see if yours is different. I also used ressurrection remix OS. Short version is:
1. Get resurrection remix (final version for starlte)
2. Get gapps (for 8.1 arm64)
3. Get magisk
The above 3 are all on the post for the official resurrection remix on this site with the header -[ROM] [OFFICIAL] [6/01/18] ResurrectionRemix 6.0 for S9/S9+ (Exynos)
4. Download the BRE5 vendor. I used a link that went to a mega.nz site and it worked. So I'm sure you'll be able to find one. I can't post links cause this is my first post.
5. Boot into twrp
6. Format data in wipe section of twrp
7. Wipe dalvik, cache, data, system.
8. Install in this order -do not reboot or wipe anything. Just install.
(I) BRE5 vendor
(II) resurrection remix ROM
(III) gapps
9. DONT WIPE cache, and reboot into the OS
10. If you want root -just go back into twrp once you have set up google, apps etc. And then install the magisk zip.
Click to expand...
Click to collapse
Hello, Iám also having the same problem. I got all the files needed but the BRE5 Vendor file, could anyone link it plz? Iám using a G960F (S9).
Haxomen said:
In TWRP did the internal storage maybe say 0mb? Tat happens when you dont abort the factory reset after OEM unlock. If it is that than just go to advanced wipe, pormat your data to fat2 and then back to fat4
Click to expand...
Click to collapse
Thanks :good::good::good:
I have somewhat same problem. Rooted my S9 original OS and it worked fine. After power off the phone is in bootloop and the only way to shut the phone off is to boot in the twrp and reboot-->shut off.
And the only way to get to the twrp is power+volume up+bixby button combination.
I made a thread about my problem, it's here
Problems with rooting Galaxy S9 (Android 10 Exynos SM-G960F)
Hi, this is My first post here, so be gentle. My old Oneplus died and I bought a used Samsung Galaxy S9. I tested the phone with an original OS and it worked fine. Yesterday I decided to root it (there are a few features that need root and I...
forum.xda-developers.com
Now I'm stuck and I need a help to proceed. What i should do to get the phone open again? Would it be a good idea to flash lineageOS now, or is there a way to reset the phone back to original?
I can open trwp or download mode, but cannot boot to the OS.