I was able to connect to the n5x via fastboot successfully upon unboxing. However, I decided to update to take the OTA first and then unlock / flash unencrypt boot.img / twrp / supersu beta. Once the update was complete I of course enabled developer options, enabled usb debugging, and allowed for OEM unlocking.
Now I can still connect via adb just fine, but the pc cannot connect over fastboot (not even the toolkits can). I did notice under device manager that the pc does not recognize the n5x while in fastboot now (like it does in adb normally). I cannot install pc drivers to remedy this while the device is in fastboot mode.
I am using google usb drivers (current), java/sdk/etc. all installed. Super perplexing...no idea what the difference is between the original build and the MDB08I version (b/c this is where things went sideways for me).
Owned a nexus 7, 5, 6, and 9 ...I am so surprised at this outcome lol (always been a breeze).
Mtp on server 2012 was the issue.
I had this issue after i unlocked the bootloader easily, then when I tried flashing modded boot image I couldn't connect and wasn't finding my device from adb devices. I had to reinstall the Google drivers and finally worked after 3 hours of restarting my phone and computer ? hope this helps
I finally got around to trying to install a custom recovery and root my HTC M8 (Verizon, KitKat 4.4.4).
I had previously unlocked my phone with SunShine - and have S-Off.
I tried installing adb/fastboot/drivers downloading from this thread:
http://forum.xda-developers.com/showpost.php?p=48915118
On my phone I turned off fastboot, enabled developer mode, and enabled USB debugging.
I connect my phone, it says USB debugging connected - and my PC (Windows 7) recognized the device.
However, when I try fastboot devices it does not recognize my phone - it returns nothing.
I realized that I had previous versions of adb/fastboot installed on my PC (From HTC Syanc & the WugFresh Nexus toolkit). I uninstalled them and reinstalled the drivers from that link, but still no adb/fastboot.
One thing I noticed is that (unlike the tutorial video on the link) in Device Manager my phone is not recognized under Other devices/ADB interface, but rather appears under Android USB devices / My HTC. I tried following the tutorial and tried to update the driver software, but it was not possible to use the downloaded Google drivers.
I tried unistalling the My HTC driver. The phone then appears for time under Other Devices / Android phone and then it re-installs the My HTC driver.
The PC recognizes it as an MTP/Media Player device, but not as an ASB one.
Any suggestions?
edit: Never mind. Arg, stupid me - I forgot to put the phone into fastboot usb mode.
Yeah....
ADB commands only work in a booted O.S or recovery
FASTBOOT commands only work in the bootloader
Okay so now that I've scanned pretty much all of what the internet has to offer on this issue, I'm helpless and forced to write a new thread here about this.
Yes, a similar question has been replied to a million times before, but absolutely none of that helped, made no difference whatsoever.
So earlier, I was on the stock rom, with TWRP flashed and root access. But wanted to switch to the community build. Tried the twrp trick to install the CB but that didn't work, so flashed the stock OP3 rom and flashed community build.
All went fine, until I tried flashing back TWRP. Used the traditional ADB method of doing that, seemed to have flashed it but tried going into recovery only to be presented with a black screen. I got fed up of that trying to fix it for a whole day so I just left it, because I could still boot into the OS and that worked fine.
Fast forward to about a week later; somehow the flash didn't work and I still have stock recovery. Now I try flashing TWRP again, but I discover that my device doesn't get detected in fastboot. It absolutely refuses to.
It DOES, however, gets detected in the OS just fine.
I've tried every which way, absolutely NOTHING seems to work AT ALL.
- OEM unlocking is checked, if that makes a difference
- USB debugging is turned on
- Uninstalled all USB drivers related to the device, and installed them via device manager (but it gave me this error:
"the folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems)
seeing as I'm on an x64 version of Windows (its worked before with my Nexus 5, I swear)
- Tried it with different adb fastboot files, from all over the internet. All of them show just that blank space after I type in 'adb devices'
- Installed universal adb drivers.
- Samsung drivers.
- Obviously the official OnePlus drivers.
- Used Usbdeview to uninstall / force stop and re-installed the drivers.
- All in one tool
Now I'm thinking, I should try to re-lock the bootloader and unlock it again, or do like hard rest sort of things. I have no idea though, how this would affect the detection in fastboot.
Anyone have any ideas? Because I'm out of all of them, and so is most of internet.
TL;DR - Adb devices detects phone while booted in OS, but not in fastboot. Tried all methods, nothing works. Going to do lock bootloader then unlock it and try again, if not that then going to do a clean wipe and install the community build again, hoping that would work. Should I?
railpressureflip said:
Okay so now that I've scanned pretty much all of what the internet has to offer on this issue, I'm helpless and forced to write a new thread here about this.
Yes, a similar question has been replied to a million times before, but absolutely none of that helped, made no difference whatsoever.
So earlier, I was on the stock rom, with TWRP flashed and root access. But wanted to switch to the community build. Tried the twrp trick to install the CB but that didn't work, so flashed the stock OP3 rom and flashed community build.
All went fine, until I tried flashing back TWRP. Used the traditional ADB method of doing that, seemed to have flashed it but tried going into recovery only to be presented with a black screen. I got fed up of that trying to fix it for a whole day so I just left it, because I could still boot into the OS and that worked fine.
Fast forward to about a week later; somehow the flash didn't work and I still have stock recovery. Now I try flashing TWRP again, but I discover that my device doesn't get detected in fastboot. It absolutely refuses to.
It DOES, however, gets detected in the OS just fine.
I've tried every which way, absolutely NOTHING seems to work AT ALL.
- OEM unlocking is checked, if that makes a difference
- USB debugging is turned on
- Uninstalled all USB drivers related to the device, and installed them via device manager (but it gave me this error:
"the folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems)
seeing as I'm on an x64 version of Windows (its worked before with my Nexus 5, I swear)
- Tried it with different adb fastboot files, from all over the internet. All of them show just that blank space after I type in 'adb devices'
- Installed universal adb drivers.
- Samsung drivers.
- Obviously the official OnePlus drivers.
- Used Usbdeview to uninstall / force stop and re-installed the drivers.
- All in one tool
Now I'm thinking, I should try to re-lock the bootloader and unlock it again, or do like hard rest sort of things. I have no idea though, how this would affect the detection in fastboot.
Anyone have any ideas? Because I'm out of all of them, and so is most of internet.
TL;DR - Adb devices detects phone while booted in OS, but not in fastboot. Tried all methods, nothing works. Going to do lock bootloader then unlock it and try again, if not that then going to do a clean wipe and install the community build again, hoping that would work. Should I?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3485186
Having the exact same Problems with my OP3 running everything stock 3.2.7 expect for the fact the device is unlocked...
Would love to hear how the problem can be solved!
ELoTRIX said:
http://forum.xda-developers.com/showthread.php?t=3485186
Click to expand...
Click to collapse
Hmmm Windows 7.
I can most certainly try that but the real question now is; how the hell did it work previously on my Windows 10 machine and refuses to work now? But at least I have a solution to try out, in the mean time! Thanks!
railpressureflip said:
Okay so now that I've scanned pretty much all of what the internet has to offer on this issue, I'm helpless and forced to write a new thread here about this.
Yes, a similar question has been replied to a million times before, but absolutely none of that helped, made no difference whatsoever.
So earlier, I was on the stock rom, with TWRP flashed and root access. But wanted to switch to the community build. Tried the twrp trick to install the CB but that didn't work, so flashed the stock OP3 rom and flashed community build.
All went fine, until I tried flashing back TWRP. Used the traditional ADB method of doing that, seemed to have flashed it but tried going into recovery only to be presented with a black screen. I got fed up of that trying to fix it for a whole day so I just left it, because I could still boot into the OS and that worked fine.
Fast forward to about a week later; somehow the flash didn't work and I still have stock recovery. Now I try flashing TWRP again, but I discover that my device doesn't get detected in fastboot. It absolutely refuses to.
It DOES, however, gets detected in the OS just fine.
I've tried every which way, absolutely NOTHING seems to work AT ALL.
- OEM unlocking is checked, if that makes a difference
- USB debugging is turned on
- Uninstalled all USB drivers related to the device, and installed them via device manager (but it gave me this error:
"the folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems)
seeing as I'm on an x64 version of Windows (its worked before with my Nexus 5, I swear)
- Tried it with different adb fastboot files, from all over the internet. All of them show just that blank space after I type in 'adb devices'
- Installed universal adb drivers.
- Samsung drivers.
- Obviously the official OnePlus drivers.
- Used Usbdeview to uninstall / force stop and re-installed the drivers.
- All in one tool
Now I'm thinking, I should try to re-lock the bootloader and unlock it again, or do like hard rest sort of things. I have no idea though, how this would affect the detection in fastboot.
Anyone have any ideas? Because I'm out of all of them, and so is most of internet.
TL;DR - Adb devices detects phone while booted in OS, but not in fastboot. Tried all methods, nothing works. Going to do lock bootloader then unlock it and try again, if not that then going to do a clean wipe and install the community build again, hoping that would work. Should I?
Click to expand...
Click to collapse
You need modified twrp by @eng.sdk.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56
I am having a similar issue. I have a brand new OP3. Everything stock. I'm attempting to unlock the bootloader and have found that while ADB recognises the phone, Fastboot doesn't. I'm pretty sure it's a driver issue and I have no idea how to fix.
Hello
Everything is working good
it seems to be a problem with adb Windows 10 IDK
, it is better to do it on Windows 7
Follow this :
http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
abhi0502 said:
You need modified twrp by @eng.sdk.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56
Click to expand...
Click to collapse
I'm afraid you've missed the point, my friend.
If the phone does not get detected in the fastboot, it means I cannot flash anything, period. No original TWRP, no modified TWRP.
I had this exact issue and fixed it.
Fastboot would never see my device, no matter which driver package I tried or no matter how I tried to install or force the correct drivers. Turns out Windows 10 (and Windows 8) has a feature that completely prevents installation of unsigned drivers, which blocks the fastboot driver. If you're seeing "Kedracom" or "Android Device" in the device manager, then your driver is NOT actually installed. This is true even if Windows doesn't throw you an error message during install, or if you appear to force the installation. Even though it looks like you're doing the install correctly, Windows just ignores your unsigned drivers.
You need to temporarily disable the security feature to permit installation of unsigned drivers. This involves invoking a special restart function. Here's the howto for Win10: http://www.howtogeek.com/167723/how-...igned-drivers/
Once you've done this, on the next reboot you can do a forced install of the unsigned fastboot drivers you downloaded for the OP3. And simply rebooting your computer restores the security feature.
It's mostly because of the windows security over unsigned drivers.. Try the above method or just the cmd way..
Sent from my Xiaomi Mi 5 using XDA Labs
hey guys, I just got my OP3, I want to open the bootloader before I store some data that will be erased anyway when unlocking, I enabled USB Debugging & OEM unlocking & Advanced reboot and then I accepted the RSA Fingerprint popup. (Then, when running adb devices, I got the id of my device).
Now, I am in bootloader mode, and when running fastboot devices, I get nothing. I already installed Oneplus drivers when first connected the device.
In Device Manager under Other Devices I can see a device named "Android". When trying to install the drivers manually by browsing devices I have on my computer, I can only see "Samsung ADB Interface" and I am afraid installing this will not work when trying to unlock the bootloader. What can I do? I also have a Kali Linux Laptop if that's helping. Thanks.
Put in fastboot mode, connect to computer and manually select fastboot interface from the device manager "install device/update driver manually" box. That worked for me.
JusTeN_ said:
hey guys, I just got my OP3, I want to open the bootloader before I store some data that will be erased anyway when unlocking, I enabled USB Debugging & OEM unlocking & Advanced reboot and then I accepted the RSA Fingerprint popup. (Then, when running adb devices, I got the id of my device).
Now, I am in bootloader mode, and when running fastboot devices, I get nothing. I already installed Oneplus drivers when first connected the device.
In Device Manager under Other Devices I can see a device named "Android". When trying to install the drivers manually by browsing devices I have on my computer, I can only see "Samsung ADB Interface" and I am afraid installing this will not work when trying to unlock the bootloader. What can I do? I also have a Kali Linux Laptop if that's helping. Thanks.
Click to expand...
Click to collapse
Its fine just search for fastboot devices and see if your device comes up. Mine was showing the same thing and i continued and it worked
I have searched the net high and low for a answer to this question but nothing I have tried works.
I have used every adb and fastboot installer i could find, but nothing i do get fastboot working on my 5t. ADB is recognised and i can reboot to the bootloader from a command shell. But as soon as i type "fastboot devices" it shows nothing.
I have been into device manager and it shows issues with the fastboot driver, i have tried everything i can think of to fix this issue.
I would really love to root my 5t and and have never encountered this many issues on any of my previous devices.
Running a 64gb OP5T and Windows 10
Thank you for your help
I have now re-installed windows 10, re-installed all drivers and ADB and fastboot. ADB is still working but nothing from fastboot. It's recognised properly in device manager but nothing shows up when I type fastboot devices or fastboot OEM unlock. Any tips would be great.
http://www.codeshuffle.in/2016/12/kenzo-fastboot-adb-connection-fix.html
check this link specially driver signature enforcement disable part, it may help
When you say "nothing shows up", what exactly is the response?
How are you getting into the bootloader? Use this from recovery or system:
Code:
adb reboot bootloader
Then proceed.
ADB is working fine. But as soon as I reboot to fastboot mode the phone doesn't respond. I can't work it out have tried everything.
djmcnz said:
When you say "nothing shows up", what exactly is the response?
Click to expand...
Click to collapse
^^
It just says waiting for device or says nothing and brings up a new line. I'm guessing the fastboot driver is the problem. I have installed the Oneplus drives included with the phone. I've installed the universal ones, still nothing.
Is there an individual fastboot driver I could manually install through device manager?
Appreciate the help.
The issue is finally fixed! I went into device manager and changed the driver from a list of drivers on my pc to WINUSB and now its working
Same problem here pal, how did you change driver to winusb, seems I've got all the gear just no idea... By gear I mean files/drivers lol. Rooted so many devices I thought this would be easy, looking forward to getting it sorted. I love a custom rom