My leeco le1 pro update cm 13 and all sensors not working ı setup cuco not working all sensor ı last update stock rom but
It stays on the first boot screen .
The sim card stays on the insert screen (insert Sim card ) not opening on stock rom help please
i TRY (Delete folder / data / system / sensors
And / data / misc / sensors
And delete file /persist/sensors/sns.reg
Restart) Not Working this way
I do not have much English Sorry all
Related
hello my friends ,
recently I have installed a custom ROM on my huawei device , but I forgot to get backup from original ROM of my phone
all of my backup data has taken with HiSuite - the special program for huawei devices - and when I installed the new ROM i can't connect to the HiSuite in my pc because it isn't support my phone any more after changing the ROM
my question : can i install huawei official frimwares with CWM in order to use hisuite again ? [ frimware file name is like this >>> update.app ]
another question : how I can use hisuite on my new ROM for restore data ?
* : HiSuite.apk is not installing on my new ROM , can I force it ?!
please help me my friends ... thanks :x
help me pelase answer faster if is possible ...
New to the site, Hope im posting in the right place
I posted in the xiaomi website , and it was nothing but a waste of time , hope i find a solution here
I have a Redmi 1s and suddenly one day my phone showed no service
My problem : Wifi disabled , No service , phone taking very long to power off ,
I read a forum and according to that i flashed my phone
but still the problem persists
Network: Unknown
Signal Strength : 0 dBm
Mobile network type:Unknown
Service status : Out of service
Roaming: Not roaming
Mobile network state isconnected
My phone no : unknown
IMEI : Unknown
Model No; HM1S
Android version: 4.4.4 KTU84P
MIUI VERSION : 5.4.10 Beta
CPU : Quadcore 1.6 GHz
Ram : 1. GB
Internal Memory : 4.79 GB
Baseband Version : Unknown
After going through forums i think i have imei problem
kindly someone suggest me solution other than sercvice centre
or if i should post somewhere else let me know
slazerf said:
New to the site, Hope im posting in the right place
I posted in the xiaomi website , and it was nothing but a waste of time , hope i find a solution here
I have a Redmi 1s and suddenly one day my phone showed no service
My problem : Wifi disabled , No service , phone taking very long to power off ,
I read a forum and according to that i flashed my phone
but still the problem persists
Network: Unknown
Signal Strength : 0 dBm
Mobile network type:Unknown
Service status : Out of service
Roaming: Not roaming
Mobile network state isconnected
My phone no : unknown
IMEI : Unknown
Model No; HM1S
Android version: 4.4.4 KTU84P
MIUI VERSION : 5.4.10 Beta
CPU : Quadcore 1.6 GHz
Ram : 1. GB
Internal Memory : 4.79 GB
Baseband Version : Unknown
After going through forums i think i have imei problem
kindly someone suggest me solution other than sercvice centre
or if i should post somewhere else let me know
Click to expand...
Click to collapse
Same problem happened to me... I tried all the possible ways.........but unable to succeed.
I suggest you to go to service centre...(they will tell u motherboard of phone has gone... and they will replace it.)
Hey bro you should root your phone and flash any custom ROM recommend carbon lollipop
Press thanks button if helped you
That has to do with the beta OS, restart the phone with the Sim tray empty, boot it up, power it off, place the Sim back and power it back on.
The beta Roms are region specific, ensure you pick either the world ROM or the Chinese ROM, whichever region your phone was manufactured to run on.
try to flash with miui fastboot rom..and l think the problem from the custom rom..try to switch off and exchange your sim and turn it on..
Sent from my HM 1SW using XDA Free mobile app
Hello All,
I bought a used Note 4 with following specs:
- KK 4.4.4, N910F (F-Firmware) , GERMAN language
I decided to flash CM 12.1 and lost my IMEI and Baseband; unfortunately made no efs-backup or any backup .
CM 12.1 runs stable, but no signal , no telephony...; with various apps (CPU-Z etc.) I checked all device details:
- Modell: N910F , but N910P (P-modell) as bootloader....
Trying to install stock F-Firmware again, it failed; I could only install stock P-Firmware (US Sprint)....there are differences in trltespr, trlte, trltexx...???
Please help me, how can I get back IMEI, baseband and more how can I get back 1st F-Firmware with GERMAN language (I bought it with KK 4.4.4, N910F ( F-Firmware) , GERMAN language)!
The last 2-3 days and nights I installed P-Firmware, but only with a few english/south-american languages; with P-Firmware IMEI & baseband are 100% ok...but no german language and LTE here....!
Please help, how can I get back to 1st version....?
Thanks a lot
miki306 said:
Hello All,
I bought a used Note 4 with following specs:
- KK 4.4.4, N910F (F-Firmware) , GERMAN language
I decided to flash CM 12.1 and lost my IMEI and Baseband; unfortunately made no efs-backup or any backup .
CM 12.1 runs stable, but no signal , no telephony...; with various apps (CPU-Z etc.) I checked all device details:
- Modell: N910F , but N910P (P-modell) as bootloader....
Trying to install stock F-Firmware again, it failed; I could only install stock P-Firmware (US Sprint)....there are differences in trltespr, trlte, trltexx...???
Please help me, how can I get back IMEI, baseband and more how can I get back 1st F-Firmware with GERMAN language (I bought it with KK 4.4.4, N910F ( F-Firmware) , GERMAN language)!
The last 2-3 days and nights I installed P-Firmware, but only with a few english/south-american languages; with P-Firmware IMEI & baseband are 100% ok...but no german language and LTE here....!
Please help, how can I get back to 1st version....?
Thanks a lot
Click to expand...
Click to collapse
Download this apk from playstore it will tell you the model of phone that you have then you can look for a stock rooted rom or flash stock tar
thank you ricohz;
I will post the results here; hopefully you can help me about after that..
Hello ricohz,
please find attadhed the device info from Phone INFO Samsung:
Manufacturer: Samsung
Device modell: SM-N910F
device typ: trltexx
product name: cm_trltexx
Country: /
production date: /
Knox 0x1
product code: /
original CSC code: XAS
firmware code: / ??? nothing?
active CSC code: /
CSC country: /
bootloader version: N910PVPU4DPE1
PDA version: /
CSC-version: /
kernel: 3.10.40.-g05abc2e
Hardware/Board: qcom/APQ8084[32Bit]
platform/chip: apq8084
GPU: Qualcomm Adreno 420
RAM: 2,72 GB
Most info are "blank"...
Hopefully, you could help me, why devioce is "F" but bootloader is "P"; I tried several official firmwares..only P-Firmware is possible to insrtall...why not "F-Firmware"...???
Same here !!
Hello everybody , i got an Asus ZenFone2 ZE551ML phone.
Baseband version : 1524_5.0.29.0_0609,1517_7.0.16.0_0605
Kernel version : 3.10.20-x86_64_moor-g4a549b3
Build number : LRX21V.WW-ASUS_Z00A-2.19.40.18_20150612_1183_user
CPU : 1.8GHz
RAM : 2GB
Android version 5.0
So , i can't update the firmware from the about section cause the @SysteM [email protected] is missing , so i tried to do it manually. I downloaded the latest version of ww firmware from asus official website and procceded as usual , clicked ok on the update notification , the phone restarted and started to install the update. After a short time , the "Error" message popped , with a green android. How can i fix this? Help me please ! ( I have to mention that the SKU version listed on the Recovery Menu is "CN" , but the one on the about section is "WW" so i tried to install the WW one )
robotofo said:
Hello everybody , i got an Asus ZenFone2 ZE551ML phone.
Baseband version : 1524_5.0.29.0_0609,1517_7.0.16.0_0605
Kernel version : 3.10.20-x86_64_moor-g4a549b3
Build number : LRX21V.WW-ASUS_Z00A-2.19.40.18_20150612_1183_user
CPU : 1.8GHz
RAM : 2GB
Android version 5.0
So , i can't update the firmware from the about section cause the @SysteM [email protected] is missing , so i tried to do it manually. I downloaded the latest version of ww firmware from asus official website and procceded as usual , clicked ok on the update notification , the phone restarted and started to install the update. After a short time , the "Error" message popped , with a green android. How can i fix this? Help me please ! ( I have to mention that the SKU version listed on the Recovery Menu is "CN" , but the one on the about section is "WW" so i tried to install the WW one )
Click to expand...
Click to collapse
did you fix it? How? i have a same problem.. if you find solution please share with me.
Does the phone boot the ROM properly? Is the phone rooted?
Did you try copying the firmware to an SD card and installing it from stock recovery? If you have a stock MM recovery, you can choose the "apply update from SD card" option. If you don't have MM stock recovery, you may have to change the zip file name to "MOFD_SDUPDATE.ZIP"
Hello ,
After I bricked my oppo find 7a I was hopeless then Allah helped me and I flashed a stock ROM with QFILthen it wasn't all okey now oppo isn't opening it was stuck in logo but hopefully its fastboot and recovery working fine so I downloaded update package spectrum and color os 2.1.5i . color os 2.1.5i ROM/update pack worked fine but sim and all the sensor gone :crying:,I found a qcn file online I restored it by putting my phone in diagnostic mode by the QPST ,now the sim work WiFi work but sensor are not working like gyro,magnetic,screen of gesture etc:crying:,please help me any of you ,I will pray for anyone who would help me :angel::angel: