This is stock QA1 MM firmware .. If you simply want to restore back to stock for any reason or wanting to update .. This is January update!
AP_G928TUVS4DQA1_CL9831985_QB12222086_REV00_user_low_ship.tar.md5
BL_G928TUVS4DQA1_CL9831985_QB12222086_REV00_user_low_ship.tar.md5
CP_G928TUVS4DQA1_CL9831985_QB12222086_REV00_user_low_ship.tar.md5
CSC_G928TTMB4DQA1_CL9831985_QB12222086_REV00_user_low_ship.tar.md5
Note:
Ignore the extra G928T_QA1.tar
https://www.androidfilehost.com/?fid=457095661767135558
There is a way to have root access?
Never mind I found it
Sorry for the late reply .. But yes you can root with CF Root or within TWRP
Is this a flaseable file by recoveri?
please help
I have an AT&T S6 Edge + unlocked for use with Metropcs. I need to utilize the WiFi calling and I'm not able to use 4g lte while calling either. I have spent hours and hours looking through forums and reading, downloading stock T Mobile ROM files to try to flash my phone through Odin. I get a PIT error message on the phone every time. Everyone says that my baseband version has to match or else it will not work. If I want to flash T Mobile stock ROM on my phone I don't see how that is possible. Can someone please walk me through this if possible?
Phone info:
Samsung Galaxy S6 Edge Plus
SM-G928AUCS4CQA1
6.0.1 32 GB
:crying::crying::crying::crying:
JUSMEJOSE said:
Sorry for the late reply .. But yes you can root with CF Root or within TWRP
Click to expand...
Click to collapse
plase help me
dm-verity verification failed need to check drk first s6 edge+
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4788 M
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4788 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
Related
I recently found out I soft bricked my phone after browsing through the forums. I looked up for the solution and it turns out that I need to reset it back, no problem with that so I installed odin back again (I rooted my phone before so I had it). I first downloaded the official firmware from sammobile or some site like that and I downloaded a PIT file for my phone because the tutorial said it was essential when resetting a smartphone. I followed every step but when I launch odin and select the required tick boxes and the PDA PITi I start it. It starts up but in the middle of the loading I shows up the DO NOT TURN OFF THE TARGET!!! message and It stops.
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the error and I can't seem tı get past it. I really need to deal with this quickly so if any of you have a solution, ı would appreciate it. Thanks
Anyone has the same issue? I need to fix this ASAP.
a
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
Now the error goes like this and nothing more.
aqertmen said:
Anyone has the same issue? I need to fix this ASAP.
Click to expand...
Click to collapse
I'm getting the exact same problem, can't fix it
Have you made any progress?
Thanks.
aqertmen said:
I recently found out I soft bricked my phone after browsing through the forums. I looked up for the solution and it turns out that I need to reset it back, no problem with that so I installed odin back again (I rooted my phone before so I had it). I first downloaded the official firmware from sammobile or some site like that and I downloaded a PIT file for my phone because the tutorial said it was essential when resetting a smartphone. I followed every step but when I launch odin and select the required tick boxes and the PDA PITi I start it. It starts up but in the middle of the loading I shows up the DO NOT TURN OFF THE TARGET!!! message and It stops.
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the error and I can't seem tı get past it. I really need to deal with this quickly so if any of you have a solution, ı would appreciate it. Thanks
Click to expand...
Click to collapse
doc1975 said:
I'm getting the exact same problem, can't fix it
Have you made any progress?
Thanks.
Click to expand...
Click to collapse
Hi
Do you have a custom recovery?
Which phonemodel do you have?
U can install TWRP through Odin using a tar file. Go to TWRP and search your model, get the tar file and install it.
From TWRP u can sideload a rom using ADB.
You can push files to the phone using it, that way u can push the rom to the phone and install it through TWRP.
A long way around but worth trying when all else fail.
hi im trying to return to stock from kk and when i use odin this happens:
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
does anyone know what to do, i've never ran into this before... i've tried odin versions 1.85 and 3.07
info, phone was running vanir 4.4.2 nightly tried to update to latest and phone wouldnt start os so booted into recovery and it went straight to trying to install the rom again, and keeps doing so, so im trying to return to stock to start a new. yes the flash was a dirty flash (vanir has an ota updater script that lets you know a new version is avalible and after downloading it will ask if you want to install, from there it reboots into recovery and installs it and reboots all for you, and it seems like it just got stuck...)
deathblade said:
hi im trying to return to stock from kk and when i use odin this happens:
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
does anyone know what to do, i've never ran into this before... i've tried odin versions 1.85 and 3.07
info, phone was running vanir 4.4.2 nightly tried to update to latest and phone wouldnt start os so booted into recovery and it went straight to trying to install the rom again, and keeps doing so, so im trying to return to stock to start a new. yes the flash was a dirty flash (vanir has an ota updater script that lets you know a new version is avalible and after downloading it will ask if you want to install, from there it reboots into recovery and installs it and reboots all for you, and it seems like it just got stuck...)
Click to expand...
Click to collapse
ok fixed it, needed to download older version of cwm and flash it via odin then wipe everything then flash latest twrp vid odin and that fixed it
older CWM + ODIN (and everything else to root stock 4.1.1) (please note i did not compile this just posting the one i found to fix my issue)
Latest TWRP FOR ODIN
please note these file should only be used on D2ATT (Samsung Galaxy S III SGH-I747 AT&T Variant)
I was on resurrection remix rom and I wanted to go back to the stock rom.So I downloaded the firmware for my region from stockroms.net and tried flashing it in ODIN.The problem is that odin gives a fail error when it reaches the end of the system.img file.I don't know what to do here,please help.Here is the progress report from odin.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Try using an older version of odin like 1.85 and also make sure the downloaded rom is ok.
I did that.I used like 3 different versions of odin and 2 stock roms with different regions.No effect.I have flashed TWRP back again so atleast some functionality is restored
Ok seems lik a partition issue. Try using an appropriate pit file.
gambitflash said:
I was on resurrection remix rom and I wanted to go back to the stock rom.So I downloaded the firmware for my region from stockroms.net and tried flashing it in ODIN.The problem is that odin gives a fail error when it reaches the end of the system.img file.I don't know what to do here,please help.Here is the progress report from odin.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
After Flashing The Stock Firmware Through Odin And Recieve Error MEssage Take Of the battery and put it back
Now go to download mode
Connect your phone
open odin
flash cwm or twrp using odin
when flashing is completed your phone is restart at this point Press Vup+Home+Power
Now Recovery is open
dont do anything except restart
it may ask for rooot then install it
now again go to recovery mode and flash custom rom using recovery
hope it works
I tried following the root guide and the adoptable storage guide on how to install twrp on SM-A520F but TWRP isn't installing. It seems like it works in odin, but when I boot to recovery it's the stock recovery.
Can any help me install TWRP?
Did you enable OEM in your settings?
luccajan said:
Did you enable OEM in your settings?
Click to expand...
Click to collapse
Yes, I have. I even turned it off an on and tried again.
Now currently getting this
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
For future reference: Problem was solved by unchecking "Auto-reboot" in Odin. Had to manually restart the phone after installing twrp.
download other twrp.
Use odin 3.04...
Only official released binaries are allowed to be flashed(recovery)
ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Please help.. unable to install twrp
Hi all,
I flashed twrp, and tried Lineage and Hades roms. Experienced 'no cellular network' problem and decided to revert back to stock Oreo rom.
When i tried to flash with Odin, it failed. Tried to reinstall Odin, different country roms but nope
(Running Hades rom with no cellular network now)
Here is the log:
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5039 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ushuaia said:
Hi all,
I flashed twrp, and tried Lineage and Hades roms. Experienced 'no cellular network' problem and decided to revert back to stock Oreo rom.
When i tried to flash with Odin, it failed. Tried to reinstall Odin, different country roms but nope
(Running Hades rom with no cellular network now)
Here is the log:
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5039 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You're updating the older firmware, since the latest update in July can not be downgraded, so you need the latest firmware as possible. Tell me the firmware code you're trying to flash, and I'll give you a hand
thanks for the reply @AntoKemz
here it is:
AP_A720FXXU3CRF3_CL13876027_QB18708253_REV00_user_low_ship_meta.tar.md5
BL_A720FXXU3CRF3_CL13876027_QB18708253_REV00_user_low_ship.tar.md5
CP_A720FXXU3CRE2_CP9638362_CL13561022_QB18043607_REV00_user_low_ship.tar.md5
CSC_OJV_A720FOJV3CRF3_CL13876027_QB18708292_REV00_user_low_ship.tar.md5
i just checked from updato by the way. there is a newer version for me. i started to download and will give it a try.
ushuaia said:
i just checked from updato by the way. there is a newer version for me. i started to download and will give it a try.
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-a7-2017/SM-A720F/XME/download/A720FXXU5CRH3/237351/
Ok man, this is the latest version, so you should solve .. download from here https://www.sammobile.com/firmwares/galaxy-a7-2017/SM-A720F/XME/download/A720FXXU5CRH3/237351/ sammobile is the fastest currently to download compared to the other site.
AntoKemz said:
https://www.sammobile.com/firmwares/galaxy-a7-2017/SM-A720F/XME/download/A720FXXU5CRH3/237351/
Ok man, this is the latest version, so you should solve .. download from here https://www.sammobile.com/firmwares/galaxy-a7-2017/SM-A720F/XME/download/A720FXXU5CRH3/237351/ sammobile is the fastest currently to download compared to the other site.
Click to expand...
Click to collapse
latest version solved the problem. thanks a lot
ushuaia said:
latest version solved the problem. thanks a lot
Click to expand...
Click to collapse
Nothing I'm glad you solved it, I went there too. Next time use the tanks button ^^