Related
I was trying to go back to stock MM from CM 14.1 by using adb sideload on stock recovery but i got bootloop after reboot.
So i use fastboot to flash LP stock img files: (because i can't find MM system.img)
fastboot flash splashscreen splashscreen.img
fastboot flash fastboot droidboot.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
and then the screen is black, i can't go to fastboot and there is no vibration too.
I followed this guide.
My PC still recognizes Moorefield Device but when i use xFSTK with GP Flag 0x80000807, it starts looping: FW download comleted. Continuing to OS... xFSTK doesn't flash the OS image droidboot_dnx.img.POS_sign.bin
P/S: This is the second time i got hard-brick, I was able to fix it the first time. Sorry for my English.
I did some research and trying to get 6.0 iwfi.bin, dnx_fwr.bin and the os.bin file but when i extract the ifwi.zip in UL-Z008-WW-4.21.40.178-user.zip, i got many file, i don't know what is iwfi.bin or dnx_fwr.bin
mega.nz/#!8xYCSQiR!5hkEAvXDZyFO0ZaxIMGTiWuwusCK1PcEev-1IKu0Kng
Hey Guys,
I recently had hardbricked my potter device.. Was unable to flash any rom, not even stock rom and I didnt find any thread in this forum which could have helped me.
I unbricked my device, flashed the stock rom and locked the bootloader,
The following steps will also get you unbrick your device... So, I would like to share the steps with all of you.
Note that this isnt only for unbricking, this can be done by any user who wants to flash stock rom and lock their bootloader.
Step 1: Download your potter rom from the following link: https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
"POTTER_RETAIL_7.0_NPNS25.137-33-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" download the following zip file.
Step 2: Download Minimal adb and fastboot from the following link: https://androidfilehost.com/?fid=745425885120698566
Step 3: Install Minimal adb and fastboot and extract the downloaded rom to the same folder where you have installed Minimal And fastboot package.
Step 4: After extracting open command prompt in that folder (where you have extracted the rom/ the adb and fastboot folder)
Step 5: Now boot your phone into your bootloader by pressing volume down+ power button at the same time.
Step 6: Type the following in your command prompt: fastboot devices
If it detects your device move to the next step, if it does not then you will have to install drivers for your device.
Step 7: Now Copy the following code and paste it to your command prompt:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Step 8: This will completely wipe your data and install stock 7.0 OS on your potter device. Note that this does not lock your bootloader.
Step 9: Boot your device to check if it boots and if it works.... now if you want to lock your bootloader move to the next step.
Step 10: Reboot again into your bootloader.
Step 11: Again follow the step 4, step 5 and step 6.
Step 12: Now paste the following commands in the command prompt:
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash boot boot.img
fastboot oem lock
Step 13: Reboot your device...
In this way you will be able to move to stock rom and lock your bootloader..
Please do comment if this works for you too and if you find any issues...
Thank you!!
All the Best!!:fingers-crossed::fingers-crossed::good::good:
rishivg said:
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
Click to expand...
Click to collapse
The quoted lines are redundant (surely they gave you an error since they don't exist in the G5+ firmware)
Otherwise, pretty standard Moto stuff... interesting that in 5th gen stuff you can lock after only flashing system sparsechunks, almost all previous devices required a complete flash with wipe to relock. https://firmware.center/firmware/Motorola/Moto G5 Plus/Stock/ is another good source for stock factory ROM's (it is the official repo of FirmwareTeam), and Minimal ADB and Fastboot has a lots of "hacks" out there, so it is best to only reference the original source: https://forum.xda-developers.com/showthread.php?t=2317790
I am extremely familiar with previous Moto device, but am curious on this device what is the bootloader status number after relocking with this method and do you still get the unlocked warning screen after relocking like on previous Moto devices?
Hi,
Great if this guide works (not tested by me). However, it sounds viable. :good:
In any case, I suggest to put the original device and retail versions witht the link of the firmware. For example:
- XT1680 & retus: "POTTER_RETAIL_7.0_NPNS25.137-33-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip"
This is necessary. For example my is XT1685 and RETEU, then this file is not for me!
Not working. Its says cant be downgrade.
No does not work with the XT 1685 and reteu
surjeet.vishwas said:
Not working. Its says cant be downgrade.
Click to expand...
Click to collapse
what is your model number?
rishivg said:
what is your model number?
Click to expand...
Click to collapse
Xt1686 but i download another stock rom
surjeet.vishwas said:
Xt1686 but i download another stock rom
Click to expand...
Click to collapse
okay that is why it gave you error, try with the file that is mentioned in the post
This only works if you are on a previous or the exact same build. If you have already installed the August ota atm you can't relock the bootloader.
Gingernut78 said:
This only works if you are on a previous or the exact same build. If you have already installed the August ota atm you can't relock the bootloader.
Click to expand...
Click to collapse
yes exactly! you ll need to flash the whole previous build again...
rishivg said:
yes exactly! you ll need to flash the whole previous build again...
Click to expand...
Click to collapse
You can flash a previous build but it won't lock the bootloader that is the problem.
Gingernut78 said:
You can flash a previous build but it won't lock the bootloader that is the problem.
Click to expand...
Click to collapse
it will
rishivg said:
it will
Click to expand...
Click to collapse
The firmware will only re-lock your bootloader in that case if it's of the same or newer patch level as your bootloader. Older firmwares, as Gingernut78 pointed out, will get you back to stock, but if you're on the August 2017 patch level (and your bootloader is at the August 2017 patch level as well), you need a August 2017 or later stock ROM to re-lock your bootloader.
rishivg said:
Hey Guys,
I recently had hardbricked my potter device.. Was unable to flash any rom, not even stock rom and I didnt find any thread in this forum which could have helped me.
I unbricked my device, flashed the stock rom and locked the bootloader,
The following steps will also get you unbrick your device... So, I would like to share the steps with all of you.
Note that this isnt only for unbricking, this can be done by any user who wants to flash stock rom and lock their bootloader.
Step 1: Download your potter rom from the following link: https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
"POTTER_RETAIL_7.0_NPNS25.137-33-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" download the following zip file.
Step 2: Download Minimal adb and fastboot from the following link: https://androidfilehost.com/?fid=745425885120698566
Step 3: Install Minimal adb and fastboot and extract the downloaded rom to the same folder where you have installed Minimal And fastboot package.
Step 4: After extracting open command prompt in that folder (where you have extracted the rom/ the adb and fastboot folder)
Step 5: Now boot your phone into your bootloader by pressing volume down+ power button at the same time.
Step 6: Type the following in your command prompt: fastboot devices
If it detects your device move to the next step, if it does not then you will have to install drivers for your device.
Step 7: Now Copy the following code and paste it to your command prompt:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Step 8: This will completely wipe your data and install stock 7.0 OS on your potter device. Note that this does not lock your bootloader.
Step 9: Boot your device to check if it boots and if it works.... now if you want to lock your bootloader move to the next step.
Step 10: Reboot again into your bootloader.
Step 11: Again follow the step 4, step 5 and step 6.
Step 12: Now paste the following commands in the command prompt:
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash boot boot.img
fastboot oem lock
Step 13: Reboot your device...
In this way you will be able to move to stock rom and lock your bootloader..
Please do comment if this works for you too and if you find any issues...
Thank you!!
All the Best!!:fingers-crossed::fingers-crossed::good::good:
Click to expand...
Click to collapse
thank you so much you safe my life:good
rishivg said:
yes exactly! you ll need to flash the whole previous build again...
Click to expand...
Click to collapse
Please let me know how. I'm on August security patch. Xt1686 67 5 build indian version. I can flash only 67 5 build stock rom. When i try flashing older stock roms, it says bootloader version downgrade. Please please tell me how i can fully go back to stock.
ksvirdi105 said:
Please let me know how. I'm on August security patch. Xt1686 67 5 build indian version. I can flash only 67 5 build stock rom. When i try flashing older stock roms, it says bootloader version downgrade. Please please tell me how i can fully go back to stock.
Click to expand...
Click to collapse
dont flash the bootloader! ignore that command and report!:fingers-crossed:
rishivg said:
dont flash the bootloader! ignore that command and report!:fingers-crossed:
Click to expand...
Click to collapse
Are you sure it will work perfectly. No bricking and stuff?? which commands should i skip.
And once i flash it will i be able to get ota to august patch and relock?
ksvirdi105 said:
Are you sure it will work perfectly. No bricking and stuff??
Click to expand...
Click to collapse
it wont brick your device.. try it out:good:
rishivg said:
it wont brick your device.. try it out:good:
Click to expand...
Click to collapse
Once i flash it will i be able to get ota updates.
ksvirdi105 said:
Once i flash it will i be able to get ota updates.
Click to expand...
Click to collapse
lock your bootloader, you ll get updates but not security updates.. I dont know why? Need some help from developers
I followed these steps and now my Asus zf2 (ze551ml) is back alive! For the issue mentioned below, I didn't find much anywhere so I thought I'd put here what helped me.
Issue: Only fastboot mode accessible, can't enter recovery. (Also my bootloader was locked, MM bootloader, No OS). After selecting recovery mode from bootloader, again it enters fastboot, i.e the process in video above couldn't install the recovery (This must be because my bootloader was locked). I tried unlocking the bootloader by the .bat files available on XDA but since I'd not enabled OEM unlocking, unlocking failed everytime. My OS got wiped out, so only fastboot mode was accessible.
Solution:
I believe you have installed Minimal ADB and fastboot on your PC.
Download the raw file from the XDA thread.
Now first of all, change extention of the .raw firmware file to .zip.
Then just extract all files from it into adb and fastboot folder.
Now in folder (where you placed files from raw firmware and adb and fastboot tool folder) at empty place anywhere in folder hold Shift on computer keyboard and right click with mouse. Now click open command window here.
Perform the following commands one after another:
1. fastboot devices ( see if it is recognized: else plug out usb and plugin again, if USB debugging was on then this will definitely work)
2. fastboot oem erase_osip_header
3. fastboot oem start_partitioning
4. fastboot flash /tmp/partition.tbl partition.tbl
5. fastboot oem partition /tmp/partition.tbl
6. fastboot erase system
7. fastboot erase cache
8. fastboot erase data
9. fastboot erase APD
10. fastboot erase ADF
11. fastboot oem wipe splashscreen
12. fastboot oem stop_partitioning
13. fastboot flash splashscreen splash_sign.bin
14. fastboot flash token MFG_BOM_Full.bin
15. fastboot flash ifwi ifwi-prod.bin
16. fastboot flash boot boot_sign.bin
17. fastboot flash recovery recovery_sign.bin
18. fastboot flash fastboot droidboot_sign.bin
19. fastboot flash APD APD.img
20. fastboot flash system system.img
21. fastboot reboot
Phone will successfully reboot into system. Don't worry, first boot gonna take a little longer time.
Download raw file
Hello,
From where I can download raw file? Can you please provide a link?
Thanks in advance
bb04 said:
Hello,
From where I can download raw file? Can you please provide a link?
Thanks in advance
Click to expand...
Click to collapse
OP forgot to post link from he copied commands.
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
sukhwant717 said:
OP forgot to post link from he copied commands.
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
FYI, I didn't add the links because one can't add external links in their first posts.
mukunds11 said:
FYI, I didn't add the links because one can't add external links in their first posts.
Click to expand...
Click to collapse
it could be better if you would have removed or edited last line while copying commands
help. my phone condition is just like this. at first when i connected my phone to computer, powershell detected it, but then after a while, my phone disappeared from powershell. can someone help me ?
edit, i just did the thing and its doing fine even though my phone look like it is not detected
Hi everyone,
I bought a Motorola G6 play model XT1922-3 type 374B and wanted root acces on this device.
So I started by succesfully unlocking my bootloader using the following tutorial.
After this a started tried to root the device using this tutorial.
This tutorial doesn't link to boot images anymore so I was able to find the moto-g6-play-jeter-patched-twrp.img somewhere else.
I did the following things:
- reboot to bootloader [Succesfull]
- fastboot boot moto-g6-play-jeter-patched-twrp.img [Unsuccesfull]
The device did boot the twrp image but I was unable to interact with it in any way. I couldn't swipe or press buttons.
I made a short video to show this.
I wanted to retry the whole thing so I did reboot to bootloader but then I accidently entered the following command:
fastboot flash boot moto-g6-play-jeter-patched-twrp.img picture of command prompt
After this I wasn't able to normally boot my device. When I try to do so the screen goes black and says n/a in the left corner.
Please does anyone know how I could either be able to boot my normal stock rom again or to have a rooted rom?
Kind regards Sven Onderbeke
Hi Sven,
This isn't going to be the most advanced reply, as I'm not very experienced with this stuff either, but it seems you have accidentally flashed your twrp image to 'boot', wherever that is, which is why the phone isn't able to boot to system.
Can you still boot into bootloader and recovery (twrp)?
If so, then I'd suggest using fastboot to flash a sock or custom ROM. I'm not sure exactly which one though, you have basically the same model as me and that seems to use the JETER ROMS a list of which are over here (can't post links yet, so you will just have to search on mirrors . lolnet . com /firmware/moto/jeter/official/ or remove the spaces
I seem to have somehow lost the partitions on mine, but will start a new thread question about that.
Sven Onderbeke said:
Hi everyone,
I bought a Motorola G6 play model XT1922-3 type 374B and wanted root acces on this device.
So I started by succesfully unlocking my bootloader using the following tutorial.
After this a started tried to root the device using this tutorial.
This tutorial doesn't link to boot images anymore so I was able to find the moto-g6-play-jeter-patched-twrp.img somewhere else.
I did the following things:
- reboot to bootloader [Succesfull]
- fastboot boot moto-g6-play-jeter-patched-twrp.img [Unsuccesfull]
The device did boot the twrp image but I was unable to interact with it in any way. I couldn't swipe or press buttons.
I made a short video to show this.
I wanted to retry the whole thing so I did reboot to bootloader but then I accidently entered the following command:
fastboot flash boot moto-g6-play-jeter-patched-twrp.imgpicture of command prompt
After this I wasn't able to normally boot my device. When I try to do so the screen goes black and says n/a in the left corner.
Please does anyone know how I could either be able to boot my normal stock rom again or to have a rooted rom?
Kind regards Sven Onderbeke
Click to expand...
Click to collapse
Just flash a stock boot.img to boot. Then just flash TWRP to recovery. In TWRP, format data. Type yes. Then reboot recovery. Then Use TWRP to flash magisk. Done.
Hi again Sven,
I just wanted to let you know that I just downloaded the following RETAIL ROM
ALJETER_RETAIL_9.0_PPPS29.55-35-1_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
and used the following fastboot commands, one at a time.
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash oem oem.img
fastboot flash vendor vendor.img
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
Which rebooted into bootloader so pressed "start" and all booted fine now. It looks like we have the same device, so hopefully that will work for you too.
!!!!!!!!!!!!!!!!!!!!!!!!!WE ARE NOT RESPONSIBLE FOR ANYTHING THAT MIGHT HAPPEN TO YOUR DEVICE TRYING TO INSTALL THIS ROM!!!!!!!!!!!!!!!!!!!!!!
This ROM has been tested for about a week on two capri devices one from India and other from South America
Loads of thanks to @Electimon for his trees and all his help fixing issues we faced in bringing this ROM
Kernel Source: https://github.com/sultanahamer/android_kernel_motorola_msm-4.19 (forked from electimon)
Manifest: https://github.com/sultanahamer/local_manifests
Not working:
FM Radio
Dual Sim (Will look into this soon) - Looked into it. This is being flaky once enabled. Will need more time to fix this.
Telegram group: https://t.me/MotoG10Official
Flashing instructions:
Code:
Make sure you are on latest of your stock Android 11, Booted and the rom is working.
Download zip and extract it and run the following commands
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
fastboot -w
fastboot reboot fastboot
fastboot flash system system.img
# In case the above command fails saying parititon size is not enough then try to resize it with below command
fastboot resize-logical-partition system_a 1073741824 #(run this only if the above command fails and if you are on slot_a else change it to system_b)
fastboot flash system_ext system_ext.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot reboot
thanks for the amazing work on this rom
sultanahamer said:
!!!!!!!!!!!!!!!!!!!!!!!!!WE ARE NOT RESPONSIBLE FOR ANYTHING THAT MIGHT HAPPEN TO YOUR DEVICE TRYING TO INSTALL THIS ROM!!!!!!!!!!!!!!!!!!!!!!
This ROM has been tested for about a week on two capri devices one from India and other from South America
Loads of thanks to @Electimon for his trees and all his help fixing issues we faced in bringing this ROM
Kernel Source: https://github.com/sultanahamer/android_kernel_motorola_msm-4.19 (forked from electimon)
Manifest: https://github.com/sultanahamer/local_manifests
Not working:
FM Radio
Dual Sim (Will look into this soon)
Telegram group: https://t.me/MotoG10Official
Flashing instructions:
Code:
Make sure you are on latest of your stock Android 11, Booted and the rom is working.
Download zip and extract it and run the following commands
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
fastboot -w
fastboot reboot fastboot
fastboot flash system system.img
# In case the above command fails saying parititon size is not enough then try to resize it with below command
fastboot resize-logical-partition system_a 1073741824 #(run this only if the above command fails and if you are on slot_a else change it to system_b)
fastboot flash system_ext system_ext.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot reboot
Click to expand...
Click to collapse
Thank you, guys, for your awesome work. Hope we'll get a stable update. Good luck
sultanahamer said:
!!!!!!!!!!!!!!!!!!!!!!!!!WE ARE NOT RESPONSIBLE FOR ANYTHING THAT MIGHT HAPPEN TO YOUR DEVICE TRYING TO INSTALL THIS ROM!!!!!!!!!!!!!!!!!!!!!!
This ROM has been tested for about a week on two capri devices one from India and other from South America
Loads of thanks to @Electimon for his trees and all his help fixing issues we faced in bringing this ROM
Kernel Source: https://github.com/sultanahamer/android_kernel_motorola_msm-4.19 (forked from electimon)
Manifest: https://github.com/sultanahamer/local_manifests
Not working:
FM Radio
Dual Sim (Will look into this soon)
Telegram group: https://t.me/MotoG10Official
Flashing instructions:
Code:
Make sure you are on latest of your stock Android 11, Booted and the rom is working.
Download zip and extract it and run the following commands
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
fastboot -w
fastboot reboot fastboot
fastboot flash system system.img
# In case the above command fails saying parititon size is not enough then try to resize it with below command
fastboot resize-logical-partition system_a 1073741824 #(run this only if the above command fails and if you are on slot_a else change it to system_b)
fastboot flash system_ext system_ext.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot reboot
Click to expand...
Click to collapse
So installed fine on a G10 now the problem is a lack of google apps I want it and I need magisk for half the apps to to add a custom way to run apps that need root.
I cannot get gapps on it for starters as can't go into a recovery menu it's twrp I need to do all this with and the recovery on this is stock really, I will say though that is is an amazing firmware I mean really clean brilliant work but I must have twrp so I can root but also so I can add google apps which is my primary necessity root is a distant second if at all needed i do newed my apps to make images and other tools I use it for daily driver wise.
l Tried to use this TWRP https://cloudhazy.com/download/motorola-moto-g10-xt2127-2-twrp-recovery-3-5-2/ and it fails but I know the model number XT2127-2 is correct so it just doesn't allow installing or launching it, from inside platform tools openeing in a command window here mode????
I am stuck completely now.
@PHYSC-1 you should be able to find magisk inside the attached lineageos zip. Flash that to boot and you should be rooted. I am working on gapps and dual sim currently. Also, don't feel like you are stuck. At any moment, you can flash the stock firmware and go back to stock if you are not able to daily drive lineage os without gapps.
I don't want to have gapps on my phone so I didn't work on it at all until now. I see that many people are asking for gapps, so giving it a try.
In case you don't find the magisk boot image in the lineage os zip, you can create one yourself by installing magisk app and passing this lineageos boot image to it.
@PHYSC-1 we are testing gapps on this ROM now. Me and two users present on our group are testing GAPPS on this ROM. As of now, its running smooth, will publish the update in a week or so.
sultanahamer said:
!!!!!!!!!!!!!!!!!!!!!!!!!WE ARE NOT RESPONSIBLE FOR ANYTHING THAT MIGHT HAPPEN TO YOUR DEVICE TRYING TO INSTALL THIS ROM!!!!!!!!!!!!!!!!!!!!!!
This ROM has been tested for about a week on two capri devices one from India and other from South America
Loads of thanks to @Electimon for his trees and all his help fixing issues we faced in bringing this ROM
Kernel Source: https://github.com/sultanahamer/android_kernel_motorola_msm-4.19 (forked from electimon)
Manifest: https://github.com/sultanahamer/local_manifests
Not working:
FM Radio
Dual Sim (Will look into this soon) - Looked into it. This is being flaky once enabled. Will need more time to fix this.
Telegram group: https://t.me/MotoG10Official
Flashing instructions:
Code:
Make sure you are on latest of your stock Android 11, Booted and the rom is working.
Download zip and extract it and run the following commands
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
fastboot -w
fastboot reboot fastboot
fastboot flash system system.img
# In case the above command fails saying parititon size is not enough then try to resize it with below command
fastboot resize-logical-partition system_a 1073741824 #(run this only if the above command fails and if you are on slot_a else change it to system_b)
fastboot flash system_ext system_ext.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot reboot
Click to expand...
Click to collapse
Thank you for this work! I'm also anxious to get a stable, dual chip working version too.
I think the Gapps should be separate to ROM. Of course if it is possible.
Gapps works 2 problems found in testing 1 is a big one for anyone using screen cast the network auto switches from 2.4ghz to 5ghz and back intermittently causing screen cast to drop out mid use and this stuns it and creates constant bad image quality and freezing completely up.
Secondly this could be unrelated to the OS but it doesn't happen on official Motorola OS's when using the app from F-Droid called simple gallery pro if you edit an image and try to draw on an image the drawing occurs in the wrong position the pointer is below where you draw on?