My Lumia 630 keep saying "ERROR: Unable to find a bootable option. Press any key to shut down". WDRT doesn't help, it says installation successful but after NOKIA screen the phone shows this error again. This happened after I installed Reset Protection cab file with iutool, but it has installed successfully, then I restarted the phone and it showed BitLocker recovery error saying that the key is missing from the TPM. Then I used WDRT and it flashed and after restart this error appeared What can I do now to make my phone live?
Related
i have a att lumia 900 cyan. the phone is struck at the white screen at the startup after which the screen goes black with buttons at the bottom lit.. i have downloaded and installed the latest Nokia Care Suite and downloaded the required firmware files. when i start the recovery procedure (Programming >> Recovery >> start) it give the error
Recovery Failed
Error: No response received! Unable to verify response.
sometime it suggests to pull out the usb,power down the phone. press the up volume button and plug in to usb.
My Problems
unable to fully power down the phone. it vibrates and restarts,
even if i plug my phone to usb it still gives me the same error. kindly help me out
Sounds as if someone formatted the device using the very same Nokia Care suite, Not much you can do unfortunately.
I upgraded to D85120g via the LG Mobile Support Tool but lost root. While trying to restore root access, I bricked my device. Its stuck on the opening splash screen. The power button does not appear to be active. The notification led cycles between green/blue/off.
Typing "adb reboot recovery" in a console window says, "error: device not found".
The LG Mobile Support Tool recognizes the phone and says it has Software Version: D85120G, the latest available. If I click 'Options', then 'Upgrade Recovery', it goes through the steps of verifying windows, downloading 1226.54 MBytes, software extraction, and S/W Upgrade. But it only gets 4% through the upgrade and then says, "Upgrade stopped due to an error."
Powering up the phone while pressing the volume down, releasing when the splash first shows, then holding the power button again brings up the Factory data reset. I tell it yes to erase all user data & restore default settings, then yes to start. It immediately goes to the splash screen, then then android robot appears and says erasing for about 1 second, then the splash screen again. That's the last it does.
The phone shows up as a serial port but the drive letter it was mapped to has a yellow triangle "!" in device manager and says device can't start.
Can I get my phone to work again?
Got it working!
The trick was to manually set the phone into download mode by holding the volume up with the power off, then connecting to the usb cable. Once in download mode, I started LG Mobile Support Tool, clicked Options, then Install Recovery. It went through the complete process. I lost all my data but saved the phone!
Now I need root back.
Hi!
I recently bought an LG G4 from an online seller. The cell phone itself is working fine, but it has some problems. It is a refurbished model.
I will very much appreciate any help.
The cell phone is actually a F500L model (I checked it by looking at the motherboard), but in the software information it shows to be a model H81510h.
The phone is not rooted. But I believe that someone did it, changed the device's descriptions and then uninstalled it.
It is an android 5.1, but I cannot update using the update center. There it shows that it is already in the latest version.
In the developer settings, I try to enable OEM unlock, it activates for 1 second and deactivates automatically.
I try to do the hard reset, but when restarting to start the process, it presents an error "Secure booting error 1002".
I can activate USB debugging, it is recognized in ADB tools and I can send commands to it. But it does not start the bootloader with the command "adb reboot bootloader", and it presents the same error "Secure booting error 1002" if I try to send the command "adb reboot recovery".
I can activate the Download mode (by pressing the VOL UP button and inserting the USB cable), but it is not recognized by LGup (UNKNOW / COM5 H81510h), LGup does not let me work with it.
In the LG Flash Tool, it does not start the flash process, when it reaches "BIN CRC Check" it presents the error "Failed PreviousLoad0". (I already changed the port to COM41)
In LG Bridge, it is recognized as F500L and shows that there is an update. But when trying to update, it does the first steps, but after the download, when installing it gives an error and asks to start over.
I have tried to use UPPERCUT_1.0.0.0, without success.
I do not know what else to do...
Any help will be appreciated.
Hi all!
I have problem with my phone.
I turn on the phone, the HTC logo appears, then it disappears and Android is updated, then I get the error:
Unfortunately, Bluetooth has stopped. or Voicecommand or com.android.phone when I press ok, a different or the same error pops up.
When I try to flash via adb sideload or sd card it shows me error:
adb sideload
"Phone status is ROOT, upgrade fail!!! Installation aborted"
SD Card
"Phone status is ROOT, upgrade fail!!! update.zip is no correct Installation aborted"
My phone: HTC Decire 820g Dualsim mediatek
someone will help ?
Hi, recently i got in a bootloop. I was at the beach, taking pictures with Gcam, and suddenly the phone started locking and unlocking the screen, and after some time it rebooted with a "android" screen. It showed a warning saying my android was corrupted, and gave me the option to try again or factory reset.
I clicked "Try Again" and the phone tryed to reboot, and it is in a boot loop since then. I can start it in fastboot mode, but the device won't be seen by Rescue and Smart Assistant, or by ADB. Yes, i have the USB drivers installed. When i try to enter recovery mode it says "no command", and factory mode just starts the bootloop again. Please someone help me
Managed to get past no command screen, and dida factory reset.