Related
I have a request with a small donation as a reward. I'm not rich, but I can reward with some beer money.
I have managed to somehow delete my build.prop file while rooted and then managed to un-root my device. Naturally, I rebooted.
My request is for anyone with a bit of extra time to modify zergRush so that it does not look to a build.prop file to verify the android version.
If there are any other ideas on how to root a bricked Fire without a build.prop file, be my guest.
My hope is that once I am able to re-root my device, I will be able to mount /system/ as writeable and then be able to push in a build.prop file. However, obviously, until that happens I cannot put in a build.prop file.
If you have any questions I pretty much let it all out on the "How to unblock your kindle" thread.
If no one is able to do this I would understand. This is obviously beyond my technical expertise but I do appreciate any efforts or even suggestions. Even if there's no attempts made here, it is still shocking how much help is given on this forum.
EDIT: I was able to get my hands on a valid system.img and then flashed the system.img to my system partition. Doing so corrected my build.prop and my device became bootable. Thanks for all the help.
Did it update to 6.2 while in the midst of your needing around?
what does your device do?
Does it show under adb devices?
ajq said:
Did it update to 6.2 while in the midst of your needing around?
Click to expand...
Click to collapse
I updated to 6.2 on Tuesday. I have followed the directions on the "UNBRICK your kindle" thread. I have done that successfully. However, because my build.prop is missing, I can no longer re-root using zergRush. I believe that fastboot as directed in that thread restores the kindle to factory settings. I'm not quite sure if factory settings is 6.2 or if it goes all the way back to 6.0.
death2all110 said:
what does your device do?
Does it show under adb devices?
Click to expand...
Click to collapse
This is the post I created in the "How to unbrick your kindle" thread. It should answer most questions. I can use adb shell on the device but I cannot mount anything and SU responds "permission denied".
----from the other thread----
I am in a similar situation and am trying to work through it. I thought I rooted my device but when I restarted it, it didn't fully load. I've successfully done all of the steps listed in the OP but am still suck in a black screen (it's lit...but it's black) loop.
I believe I have deleted my build.pop file but have a backup listend as build.prop.bak. However, the device is trying to load and is failing. I need to rename my build.prop.bak as the primary build.prop. I have tried to access SU through ADB but am getting "permission denied" almost as if my device wasn't rooted.
I have tried to mount system as RW but I am also getting permission denied.
Any advice. Here is my /system/
:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Admin>cd \KindleFireRoot\files
C:\KindleFireRoot\files>adb shell
adb server is out of date. killing...
* daemon started successfully *
$ cd /system/
cd /system/
$ ls -l
ls -l
drwxr-xr-x root root 1970-01-01 00:00 lost+found
drwxr-xr-x root root 2011-12-01 19:03 app
drwxr-xr-x root shell 2011-12-01 19:03 bin
drwxr-xr-x root root 2011-11-30 01:16 etc
drwxr-xr-x root root 2011-11-30 01:16 fonts
drwxr-xr-x root root 2011-11-30 01:16 framework
drwxr-xr-x root root 2011-11-30 01:16 lib
drwxr-xr-x root root 2011-11-30 01:16 media
drwxr-xr-x root root 2011-11-30 01:16 tts
drwxr-xr-x root root 2011-11-30 01:16 usr
drwxr-xr-x root shell 2011-11-30 01:16 vendor
drwxr-xr-x root shell 2011-12-01 19:03 xbin
-rw-r--r-- root root 2143 2008-08-01 12:00 build.prop.bak
$
EDIT: I have tried to re-root through the method provided as well as superoneclick root, but both have failed because no android system is being recognized. This may have to do with the lack of a proper build.prop on my device.
EDIT2: I figure the above might not be enough information so I will now post what I have done so far to get it bricked, and what I have already tried.
1. I tried the rooting method on rootkindlefire.com and it seemed successful. I then was able to set /system/ as RW via root explorer. I copied a modified build.prop file that is available in the android development forums. However, unfortunately, I believe I may have edited the name of this file or done something wrong in handling it accidentally. Regardless, I pasted this file in the /system/ folder and renamed my original build.prop file to build.prop.bak. I then restarted my kindle fire. Now, it shows the kindle fire screen for a second and then goes black entirely. It is still on (the screen is lit), but the screen is black. It then remains like this until I do a hard reset and then it repeats this process.
2. I have tried to access SU but have been unable to do so. I have been unable to mount system as RW using the instruction a page back. In both situations I get the "permission denied" response from the command line.
3. Everytime I try to root using the method provided in the OP, I get a message saying that it can't find android 2.2 or 2.3
4. I am unable to root again using super click for the same reason.
5. I have otherwise been able to follow all of the steps in the OP successfully, but to no avail. My screen goes black after it shows the kindle fire screen for a couple seconds.
6. Any suggestions would be very very helpful. From my amateur amount of knowledge, it seems to me that I don't have a build.prop in my /system/ but am unable to rename or access my build.prop.bak so that I can set it as the regular bootable build.prop. This is because, even though I thought I had it rooted, I am unable to set the /system/ directory as writable.
7. ANY SUGGESTIONS OR HELP WOULD BE GREAT!
Just as a disclaimer: I acknowledge I'm a moron for not verifying everything when I pushed in a build.prop file into my /system/ folder and restarted. No need to call me names
For those who know a bit more than me...
Would pushing the 6.2 update (or any of the downloadable firmware) to the kindleupdates folder in the sdcard and then rebooting fix my problem? I remember reading that the updates re-writes the build.prop which would fix my situation.
Of course, do you need root permissions to be able to write to the sdcard? I only ask this because I can not get the sdcard to actually show up on my desktop. I would need to push it via terminal or adb shell.
Anyone know if this would work?
I am beginning to realize that I may actually still have root, but since I can't boot up the phone, I can't fill out the superuser access dialog that usually comes up when a program tries to access superuser. I had root before I caused the build.prop problems, but figured that I had somehow lost it when I tried to access SU from ADB. Anyone know of a way to bypass this access dialog?
I checked the root status with OneClickRoot after OTA reported my KF was still rooted (just to be sure) and then re-installed Superuser and pushed the necessary Android APKs back to /system/app and it was working again.
damianarnold said:
I checked the root status with OneClickRoot after OTA reported my KF was still rooted (just to be sure) and then re-installed Superuser and pushed the necessary Android APKs back to /system/app and it was working again.
Click to expand...
Click to collapse
How did you re-install Superuser if you're not able to fully boot up the KF? To be clear, when I try to root with superoneclick it says i'm rooted (and if i try and continue it fails...) but whenever I type in adb shell and then su I get "permission denied."
ejrubin said:
How did you re-install Superuser if you're not able to fully boot up the KF? To be clear, when I try to root with superoneclick it says i'm rooted (and if i try and continue it fails...) but whenever I type in adb shell and then su I get "permission denied."
Click to expand...
Click to collapse
My Fire was fully booted up. Did you remove and reinstall Superuser?
damianarnold said:
My Fire was fully booted up. Did you remove and reinstall Superuser?
Click to expand...
Click to collapse
Don't think our KF were in the same state. I don't have a build.prop to boot my KF into so I can't manage superuser at all (I do, however, have a totally useless build.prop.bak that is sitting there in the directory. ) I have the superuser.apk in there so it seems as though I'm rooted but I still can't get into SU via adb.
Can't get Write access to /System or /SDCard
ejrubin said:
Don't think our KF were in the same state. I don't have a build.prop to boot my KF into so I can't manage superuser at all (I do, however, have a totally useless build.prop.bak that is sitting there in the directory. ) I have the superuser.apk in there so it seems as though I'm rooted but I still can't get into SU via adb.
Click to expand...
Click to collapse
Still having the exact same problem! Was able to get the build.prob.bak pulled from /system but can't rename it and push it back to hopefully get this working again.
I am starting to think I may have to send this KF back soon if I don't get it working again.
Any help anyone can provide would be great.
I'm thinking since we are able to get into fastboot, do any developers know if it is possible to push in a new system.img via fastboot? This would solve our build.prop problems no? Any developers know if this is possible?
I would like to compile zergRush myself, but I don't know how to compile Android binary.
It seems require linux to do so.
Can you adb push to the sdcard?
Sent from my DROID Pro using XDA App
JackpotClavin said:
Can you adb push to the sdcard?
Sent from my DROID Pro using XDA App
Click to expand...
Click to collapse
No , I think the sdcard is not yet mount. Tried cd sdcard and it's not possible.
Is it possible to mount it without root? Cause when we try to mount system folder it's permission denied.
And I'm afraid the system won't run the official update even the patch is inside the sdcard folder.
I think ejrubin's idea on how to fix our bricked kindle fire is completely right , we just need either one of the following :
1. A zergRush binary won't check the build.prop to let us run root and mount the system folder
2. Since we can get into fastboot, I think we need a correct update.zip or system.img to fix it. Any idea to build it from kindle's official update?
Well try "mount sdcard" in the shell. If you can push the update, you can idme bootmode into 0x5001 and it'll take the update in recovery mode
If that doesn't work I'll give a custom zerg a shot
Edit: I got it. If you wanna flash my clockwork build in fastboot and set the fastboot to boot into recovery, you can access your /system through recovery, I do it all the time
It'll be a fastboot flash recovery <the name of the recovery.img I'll post later when I get home>
From there you will have to:
Adb shell
Mount system
Mv /system/build.bak /system/build.prop
Sent from my DROID Pro using XDA App
JackpotClavin said:
Well try "mount sdcard" in the shell. If you can push the update, you can idme bootmode into 0x5001 and it'll take the update in recovery mode
If that doesn't work I'll give a custom zerg a shot
Edit: I got it. If you wanna flash my clockwork build in fastboot and set the fastboot to boot into recovery, you can access your /system through recovery, I do it all the time
It'll be a fastboot flash recovery <the name of the recovery.img I'll post later when I get home>
From there you will have to:
Adb shell
Mount system
Mv /system/build.bak /system/build.prop
Sent from my DROID Pro using XDA App
Click to expand...
Click to collapse
If i just type "mount sdcard" it cannot recognize the command.
if try to mount it with -t and mount it to other folder, it just say permission denied.
Of course I wanna flash your clockwork build!!
Would you mind to guide us with all the step when you're ready? Because I'm quite new to root android machine.
Really thanks for your help!!!!!!!!!!!!!!!!
Yeah **** sorry guys can this wait till tomorrow? Sorry I said tonight, I got side tracked tonight
Sent from my DROID Pro using XDA App
Hi,
I recently got a new Kindle fire and tried to root it.
I followed the instructions given in this post.
http://forum.xda-developers.com/showthread.php?t=1568340
However, my kindle fire seems to be stuck in an infinite boot loop after first step itself.
Here are the step I followed (I am using Windows 7 32bit).
1. Installed android sdk.
2. Updated the Kindle driver to install "android abd composite interface"
3. Downloaded all the required files in the platform-tools folder
Required files:
fbmode.zip - http://forum.xda-developers.com/show....php?t=1414832
twrp2 - http://teamw.in/project/twrp2/79
su - http://dl.dropbox.com/u/8699733/kindlefire/su
firefirefirefire http://forum.xda-developers.com/show....php?t=1369405
fastboot + adb for your OS of choice.
4. Followed following commands:
unzip fbmode.zip
adb push fbmode /data/local/fbmode
adb shell chmod 755 /data/local/fbmode
adb shell /data/local/fbmode
adb reboot
5. After this, my kindle fire seems to have stuck in an infinite boot loop.
- It starts up only when a USB cable is connected.
- Power light is orange and not green
- It starts up Kindle Fire logo comes up, then shuts down again
- My computer is not detecting any device, probably because KF is in an infinite boot loop
- When I run adb devices -- no devices show up
- When I run fastboot command [fastboot -i 0x1949 flash bootloader .....] it says "waiting for devices"
- When I remove the USB cable from KF, It doesn't powers on (even after long pressing the power button).
- I tried many things posted on different forums on two laptops (Windows 7 32 bit as well as 64 bit) and using different USB cables but nothing worked.
- Only thing I haven't tried is Factory cable as I don't have it and don't have money to buy it.
PLEASE HELP!!
http://forum.xda-developers.com/showthread.php?t=1623244
Superuser not working
Thanks for the help with the charging issue Kinfauns!!!
I charged my kindle fire using stock charger and finally rooted it.
However, I am still not able to install android market on my KF.
After rooting Kindle (followed all the steps given in the thread), I installed Superuser.apk.
Then to install android market, I installed root explorer and downloaded Kindle Fire android market zip file. (followed instructions from one of the NAT3MIL's video on youtube).
First step is to install googleServicesFramework.apk file, which I did.
The next step is to move market.apk file to system/apps folder. However, when I tried doing that, I got a warning:
"Your phone doesn't appear to be rooted. This is requires in order to change or delete protected files such as this ......"
I don't understand why is it saying so as I have followed all the steps in the thread to root my KF?
How to check if the KF is really rooted?
Are there any settings to be changed in the superUser.apk?
Please help!!
Thanks a ton!!
Superuser not working
One more thing.
when I tried to update SU binary file,
I got following:
Downloading manifest .. OKAY!
parsing manifest.. Okay!
Latest Version = 3.0.3.2
Checking installed version .. legacy
Fixing database .. okay!
checking for busybox .. not found
Downloading custom busybox .. okay!
checking md5sum ... okay!
checking current install path .. fail!
Failed to find current installed su binary. Update cannot continue.
Does this mean I have to re-root the KF or just install the su binary file? how to do that?
Thanks!
Download the latest kindle fire utility and rerun it for permanent root.
Known Tricks
If you end up stuck at the yellow triangle, in KF Utility select Boot Normal, wait for it to say <waiting for device> and then press and hold the power button 20 seconds until the fire turns off, then when its off turn it back on. This sometimes happens, I have yet to find a clean solution If you end up stuck with a yellow triangle, do not EVER unplug it. Leave it plugged in. Check the windows drivers to make sure it isnt showing as "kindle" again. Fastboot is different and can cause this.
Please note: If your device can't be seen in fastboot mode, please make sure to install the drivers packaged with this, as it will show up afterwards. You can use the install_drivers.bat with the device plugged in for this.
Copied from the instructions of the kindle fire utility
Above are the tricks if you get stuck but after root install twrp then install fff
I would assume that your not rooted sounds that way to me.
By the way the yellow triangle will be replaced with the new bootloader a white kindle and a blue fire this will be considered the yellow triangle in the description. Good luck
Install permanent root
Install twrp
Install fff
All should be the newest at this point hopefully
Thanks ThePooch.
So, apparently I have to re-root my KF as for some reason it was not rooted correctly. Right?
I believe so the worst that could happen is it could fail if the file already exists but let's hope it goes fine
tanwar said:
Thanks ThePooch.
So, apparently I have to re-root my KF as for some reason it was not rooted correctly. Right?
Click to expand...
Click to collapse
You don't necessarily have to let KFU do its entire "rooting" process.
If you can get into recovery and you are comfortable with adb, you can follow the "Rooting the stock software" section in this guide...
http://forum.xda-developers.com/showthread.php?t=1638452
to push the 'su' binary into the /system partition and set ownership/permissions.
If you are not comfortable with that, you can use KFU, but it will be doing a lot of extraneous things that you probably don't need.
Under extras you will put on Google frame work and go launcher after you have confirmed bootloader recovery and root note that the market can only be seen using go launcher not the kindle one.
---------- Post added at 12:32 AM ---------- Previous post was at 12:13 AM ----------
The easiest way to test root is to download an app that will request root permissions like root explorer for instance if you open the app and you don't see a dialogue pop up requesting permission its very likely that it isn't rooted.
Read-Only file system
Thanks Kinfauns and ThePooch for tips.
@kinfauns, I tried following the steps given in "Rooting the stock software" section of the given link.
http://forum.xda-developers.com/showthread.php?t=1638452
However, when I tried to push su binary file to system folder
adb push C:\kfu\software\su /system/xbin/
I got following message:
failed to copy 'su' to 'system/xbin/su': Read-only file system.
How can I change the permissions of the folder to copy su file?
I tried using shell command:
adb shell chmod 755 /system
However, I got the same message again "Read-only file system"
Please help!!
nevermind I see your on windows 7 like me. adb shell mount system will mount system to read/ write
its all in kinfauns post you just need to be it recovery to execute the commands I believe I would paste it here but its just as easy to read them from there
adb shell chmod 6755 /system/xbin/su not 755 you can probably safely copy and paste the commands from his post right into cmd he has it written up very nicely
tanwar said:
Thanks Kinfauns and ThePooch for tips.
@kinfauns, I tried following the steps given in "Rooting the stock software" section of the given link.
http://forum.xda-developers.com/showthread.php?t=1638452
However, when I tried to push su binary file to system folder
adb push C:\kfu\software\su /system/xbin/
I got following message:
failed to copy 'su' to 'system/xbin/su': Read-only file system.
How can I change the permissions of the folder to copy su file?
I tried using shell command:
adb shell chmod 755 /system
However, I got the same message again "Read-only file system"
Please help!!
Click to expand...
Click to collapse
I think you may be trying to do this while booted into the system software. That won't work because you don't have root access there and you won't be able to mount (or remount) a partition without those privileges. The rest of it won't work without R/W access to the partition, as you've already seen.
To be clear, the device needs to be booted into recovery (TWRP or CWMR) where you do have root privileges. Make sure you start with step one to get the system partition mounted. If successful, "mount" will provide no output.
I have been able to root my Kindle and want to get the store working.
I think I need to copy the Google Services Framework APK to the /system/app directory.
I am using ES File Explorer version 1.6.2.5.
My Kindle is version 6.3.2.
When I try to copy the file from the SD card to the /system/app directory it says unable to copy.
Thanks in advance for the help
Did you mount system as read/write?
I'm afraid I don't know what that means. I used KFU 0.9.6 to root the device. I had installed ES file explorer before I did the rooting. Does explorer need to be read/write, or is that an option for KFU? Is it an option I can change or do I have to re-install something?
robvia said:
I'm afraid I don't know what that means. I used KFU 0.9.6 to root the device. I had installed ES file explorer before I did the rooting. Does explorer need to be read/write, or is that an option for KFU? Is it an option I can change or do I have to re-install something?
Click to expand...
Click to collapse
ES File Explorer should have the option to do so, but I don't use it so I couldn't say for sure. If you can't figure it out, I'm sure someone around here will be able to help.
I found the Root settings in ES F E and checked the option for Root Explorer. It gave me a message that test fails option not allowed on your phone. Not sure if that is what I should be looking for or not.
robvia said:
I found the Root settings in ES F E and checked the option for Root Explorer. It gave me a message that test fails option not allowed on your phone. Not sure if that is what I should be looking for or not.
Click to expand...
Click to collapse
Do you have an ADB connection?
The Mount File System option is greyed out.
Below that it says Mount/ , /system as writable.
Does that have to be installed after the rooting is done?
Is there another file explorer option that is better?
Should I uninstall and re-install ES?
ES is on the Kindle. I have copied the APK to the kindle and to the SDcard directory. When I am connected to the computer, my computer only has access to the sdcard directory. I can't even see the /system folder.
ES can see the folder, but can't write to it.
robvia said:
ES is on the Kindle. I have copied the APK to the kindle and to the SDcard directory. When I am connected to the computer, my computer only has access to the sdcard directory. I can't even see the /system folder.
ES can see the folder, but can't write to it.
Click to expand...
Click to collapse
You still didn't answer my question. Do you have a connection with ADB? You were able to root it weren't you? You must have had an ADB connection at some point.
Sorry, Since I was trying to copy the file with out the device connected to the computer, I didn't think it mattered.
When connected to the computer, in device manager, it's Android Composite ADB Interface.
The Kindle shows up as a drive in Windows Explorer. At one point when I was doing the root, it did not show up as a drive.
If I can copy from my computer to the /system directory, that would be great, but since i don't have access to that through the computer, I was copying from the download directory on the Kindle to the /system directory on the Kindle.
robvia said:
Sorry, Since I was trying to copy the file with out the device connected to the computer, I didn't think it mattered.
When connected to the computer, in device manager, it's Android Composite ADB Interface.
The Kindle shows up as a drive in Windows Explorer. At one point when I was doing the root, it did not show up as a drive.
If I can copy from my computer to the /system directory, that would be great, but since i don't have access to that through the computer, I was copying from the download directory on the Kindle to the /system directory on the Kindle.
Click to expand...
Click to collapse
You say you used the KFU to root...do you still have it available? Run it and see if it shows ADB ONLINE.
Yes, the ADB status is online when I run KFU. I also ran Super One Click and it said your device apears to be rooted.
I also installed the app, mount /system (rw/ro).
when I select mount rw, it says the system dir remounted with r/w permission.
robvia said:
Yes, the ADB status is online when I run KFU. I also ran Super One Click and it said your device apears to be rooted.
I also installed the app, mount /system (rw/ro).
when I select mount rw, it says the system dir remounted with r/w permission.
Click to expand...
Click to collapse
Soooo...problem solved, right?
I wish it were that easy. Even though it says it's mounted in r/w mode, I can't get it to copy. Should I try and root it again? Could I have done something wrong? I used KFU and did root with superuser. Should I use Super One Click and unroot then try to root again? I don't remember any options for me to select wrong. Is there a PC tool that alllows you to copy directly to the /system directory? I really thought I was past the hard part. Thanks again for all the help.
Okay, since you have KFU and you have connection with ADB, press Shift then Right-click on the KFU "tools" folder and select "Open command window here". At the command prompt that opens up enter the following (omitting the comments in red, of course) ;
Code:
$ adb push /local/path/to/GoogleServicesFramework.apk /sdcard/ [COLOR=Red]<-- Replace "/local/path/to/..." with the location of GoogleServicesFramework.apk on your computer
[/COLOR]
$ adb shell
$ su [COLOR=Red]<-- If you receive an error here, you need to re-root
[/COLOR]~ # mount -o remount,rw ext4 /system [COLOR=Red]
[/COLOR]~ # mv /sdcard/GoogleServicesFramework.apk /system/app/GoogleServicesFramework.apk
~ # chmod 644 /system/app/GoogleServicesFramework.apk
~ # pm install -r /system/app/GoogleServicesFramework.apk
do the same for AccountAndSyncSettings and GoogleLoginService, reboot, then do the same for Vending.apk (I'm assuming you are trying to install the Market, right?)
Ok. I think I might see the issue. When I rooted the Kindle I did not have the apk copied to the device. It looks like there is a move command that copies the APK file from the SDcard to /sysstem/app folder. I think I need to put the apk in the proper place on the device and then un-root and then try and root it again.
Yes I am tyring to get the market running.
So you are saying there are 3 files that need to be copies? I have the file com.android.vending_3.8.15.apk, but I do not have AccountAndSyncSettings.
The more I read your reply, I'm less sure of myself. Before I root with KFU (or maybe super one click) do I need to have files copied to the Kindle? I guess I would have expected KFU to have these files, but OK if not included. Does KFU attempt to copy the framework file to the proper directory? If so, where does the files need to exist before starting?
I think your instructions here are a command line version of what I am trying to do with ES File Explorer. Is that true?
robvia said:
Ok. I think I might see the issue. When I rooted the Kindle I did not have the apk copied to the device. It looks like there is a move command that copies the APK file from the SDcard to /sysstem/app folder. I think I need to put the apk in the proper place on the device and then un-root and then try and root it again.
Yes I am tyring to get the market running.
So you are saying there are 3 files that need to be copies? I have the file com.android.vending_3.8.15.apk, but I do not have AccountAndSyncSettings.
The more I read your reply, I'm less sure of myself. Before I root with KFU (or maybe super one click) do I need to have files copied to the Kindle? I guess I would have expected KFU to have these files, but OK if not included. Does KFU attempt to copy the framework file to the proper directory? If so, where does the files need to exist before starting?
I think your instructions here are a command line version of what I am trying to do with ES File Explorer. Is that true?
Click to expand...
Click to collapse
You need AccountAndSyncSettings. Are you using a tutorial for this? If so, which, one?
And yes, it is the command line version of what you're trying to accomplish with ES. It will give you more control and you'll be less likely to screw up.
Sure is rooted?
I recently back to stock firm to can check battery issues. I was using JB Hashcode very happy so far and was thinking go back again, but a short pass by the stock firmware was a really bad idea because got an update on the air (6.3.2) and lose my rooted status. I've used KFU again with no luck. Root explorer, droidwall says that i'm not rooted... So sad. Any ideas?
chocaru said:
I recently back to stock firm to can check battery issues. I was using JB Hashcode very happy so far and was thinking go back again, but a short pass by the stock firmware was a really bad idea because got an update on the air (6.3.2) and lose my rooted status. I've used KFU again with no luck. Root explorer, droidwall says that i'm not rooted... So sad. Any ideas?
Click to expand...
Click to collapse
What does this have to do with the topic at hand?
Sorry for not getting back earlier. My weekend included getting hit by a deer. Really messed all my plans up.
I used the instructions here http://forum.xda-developers.com/showthread.php?t=1399889.
These screenshots show an option to install Google Apps, but I don't see that option when I run it. I guess I'm a little confused. Are there different instructions I should be following?
Hi,
im trying to install twrp and having a tough time trying to find a solution to my problem, ive rooted using zeroepochs guide, when i run the command to extract and install the recovery.zip i get a read only error as below
[email protected]:/ $ sh /sdcard/firetv2_recovery_v5.zip
Extracting unzip...
Remounting /system read-write...
mount: Invalid argument
Extracting...
checkdir: cannot create extraction directory: /system/recovery
Read-only file system
ln: /system/bin/ext4_resize: Read-only file system
Remounting /system read-only...
any help is appreciated.
You need to go into root admin.
Use the command "Su" to get into root shell
Hi, thanks I've tried that and get the same issues?
skirocket said:
Hi, thanks I've tried that and get the same issues?
Click to expand...
Click to collapse
After su command was sent through ADB, have you granted access on the pop up screen that appears at first use?
- Reset (unplug and plug back in) unit
- let it boot into main menue
- connect through ABD
- at adb shell prompt type su
- enter
- A pop up screen should appear on your TV asking you to grant access for su
- using your FireTV remote select yes and press OK.
- see if issue is solved
bula1ca said:
After su command was sent through ADB, have you granted access on the pop up screen that appears at first use?
- Reset (unplug and plug back in) unit
- let it boot into main menue
- connect through ABD
- at adb shell prompt type su
- enter
- A pop up screen should appear on your TV asking you to grant access for su
- using your FireTV remote select yes and press OK.
- see if issue is solved
Click to expand...
Click to collapse
hi thanks for the reply, i have done that and it says that i have been granted SU but i get this message
[email protected]:/ # sh /sdcard/firetv2_recovery_v5.zip
Extracting unzip...
Remounting /system read-write...
mount: Invalid argument
Extracting...
checkdir: cannot create extraction directory: /system/recovery
Read-only file system
ln: /system/bin/ext4_resize: Read-only file system
Remounting /system read-only...
Sorry to pick this up again. But i have the same Issue. How have you installed TWRP?
Thanks
I used King root, then installed a custom rom, had too many problems trying to install twrp previously.
skirocket said:
I used King root, then installed a custom rom, had too many problems trying to install twrp previously.
Click to expand...
Click to collapse
Thank you
so you used this guide http://www.aftvnews.com/how-to-root...covery-and-a-pre-rooted-rom-all-without-a-pc/ with your rooted Fire Tv2?
i used this guide http://www.aftvnews.com/how-to-root-the-fire-tv-2-using-kingroot-no-usb-cable-required/. but at the time if i remember i updated my box to stock update 5.0.5 from 5.0.4 then rooted again.
Hi, the trick is to use this Guide http://www.aftvnews.com/how-to-root-the-amazon-fire-tv-2/
Worked perfectly
I know this is an old thread but I'll post what worked for me just in case...
On ADBLink, select Root → Mount /system RW. This will make /system writable.
Not sure if this is necessary, but I switch back to RO (read only) once I was done with my changes.
Hi everyone. I am experiencing problems trying to flash RR Nougat to my Oneplus 3, currently on CM13 6.0.1. It just won't flash at all. I've wiped cache etc but it doesn't want to execute. I've also tried Lineage OS but failed, I have even tried pushing the file via Unified Android Toolkit and even that didn't work. Phone has an unlocked boot-loader (I'm pretty sure) USB debugging, root access etc. Unsure what the issue is so any help would be appreciated. This is what happened whilst using UAT.
Working out the best location to set for Internal Storage..
Waiting for Adb Mode
Device mode detected [device adb]
Pushing RR-N-v5.8.3-20170716-oneplus3-Weekly.zip to: /sdcard/
adb: error: cannot stat 'root\RR-N-v5.8.3-20170716-oneplus3-Weekly.zip': No such file or directory
File push did not work for sdcard
Setting push location to mnt/sdcard and trying again
Pushing RR-N-v5.8.3-20170716-oneplus3-Weekly.zip to: /mnt/sdcard/
adb: error: cannot stat 'root\RR-N-v5.8.3-20170716-oneplus3-Weekly.zip': No such file or directory
File push did not work for mnt/sdcard
Setting push location to storage/emulated/0 and trying again
Pushing RR-N-v5.8.3-20170716-oneplus3-Weekly.zip to: /storage/emulated/0/
adb: error: cannot stat 'root\RR-N-v5.8.3-20170716-oneplus3-Weekly.zip': No such file or directory
An Error Occured
The file did not push to the set location for some reason
Please report this in your device thread with details for more help
Press any key to return to the Main Menu..
Thank You.
I don't really have an answer for you but recently I tried to go back to stock, after I locked my bootloader I was unable to sideload anything with adb, have you tried flashing it with TWRP? Just a suggestion, are you able to use recovery at all, if uat can't find the directory, it could be a PC issue? I'm just throwing out ideas to try to help.
Update your adb drivers, now command prompt can push files larger then several mb's, don't know precisely how much.
Same problem I had couple of weeks back, don't know why but mine adb driver changed, set it back to the Google adb driver from sdk and the file was sideloaded.
Make sure you are on the latest firmware that is required.
I would just transfer through mtp or download on your op3, then just flash trough TWRP. That's what I do.
sv2203 said:
Update your adb drivers, now command prompt can push files larger then several mb's, don't know precisely how much.
Same problem I had couple of weeks back, don't know why but mine adb driver changed, set it back to the Google adb driver from sdk and the file was sideloaded.
Click to expand...
Click to collapse
Yup follow his method. This issue is somekind of adb sideload bug for huge files, name too long or not run as admin. Restarting PC, reinstall driver OP3 driver is another option if problem still persists.