Related
UPDATE 2015\08\01 ICS & JB Patch
Since ICS and JB contain boosted (modified boostedass) and sio by default now, I made a cwm zip to patch the default values of boosted and sio's correct values (they're for cfs in CM9\10). This is not for CM7 and won't work with it.*
Link to Post
UPDATE 2015\05\16 DroidXGovernorsV2.2
Removed blank bootmenu folder
Cleaned up init script, removed unsupported lines, added supported lines
Included SD Card Cache Tweak with 2048 value, to match io tweaks
**The lines weren't supported on Bravo Froyo Kernel, added new lines from /sys/block/mmcblk0/queue/iosched**
**If the removed lines are supported on GB Kernel, let me know and I'll make a zip for each kernel.**
**Just remove the last 2 lines of the init script if you don't want\need the SD Cache Tweak**
UPDATE 2015\05\15 DroidXGovernorsV2.1
Screenshots showing battery savings and usage
Fixed dumb script error
UPDATE 2015\05\15 DroidXGovernorsV2
Removed Undervolted Cpu Clocks -- Gave problems for Defy+ useres on GB kernel
SIO IO Scheduler now properly loads -- No market app needed now.
This CWM compatible zip will install the DroidX smartassv2 and BOOSTEDassV2 cpu governors as well as the SIO Kernel Scheduler. While I've only tested this on CM9, it should work on ANY rom with init.d support and Defy 2nd-init Bootmenu....meaning all CM7\9 and Miui roms. I'm unsure if MS2Ginger and Stock Froyo have init.d support. It also undervolts the rom to [email protected], [email protected], and [email protected] Those values work fine with CM9 on my phone, meaning no fc's due from being too undervolted.
To install, simply flash the zip in cwn and you're done. Wiping Cache and Dalvik Cache isn't necessary.
To use the Governors, select the governor in the CM Performance Menu and select apply on boot, or use a CPU Governor program from the market. I recommend No Frills CPU Control --- its free, no ads, no bs permissions, and you can select the io scheduler.
To use the SIO Kernel Scheduler, install No Frills Cpu Control from the market and select SIO (or noop) from the bottom menu.
I haven't used SIO very much (5-10 mins now), but it seems to be working well. The noop scheduler works great, and is what I normally use; but I've always read good things about SIO (and wanted to use it), so I thought I'd include it as well.
I'd give thanks to the authors of the Governors and Schedulers, but I have no idea who wrote them....I only found them in Beanstown106's DroidX Miui V4 rom and they happen to work wonderfully on the Bravo.
UPDATE Post
SimpleOverclock
An alternative to No Frills CPU Control with profile support, apply on boot, io changer, governor changer, & more features to come. Probably going to be my new overclock app, need to test for more than a few minutes.
My Little Experiment
I uploaded the governors here for the Bravo, and to Mediafire for the Defy. In the first 2 hours of posting -- 6 Bravo downloads to 45 Defy Downloads (and a page full of posts). Not very surprising, but interesting none-the-less.
*CM7 - The modules for boosted and sio aren't included with this patch making it useless for CM7. I've already released a patched CM7 with this in my Kang thread.
skeevy420 said:
UPDATE 2015\05\15 DroidXGovernorsV2
Removed Undervolted Cpu Clocks -- Gave problems for Defy+ useres on GB kernel
SIO IO Scheduler now properly loads -- No market app needed now.
Download DroidXGovernorsV2.zip
This CWM compatible zip will install the DroidX smartassv2 and BOOSTEDassV2 cpu governors as well as the SIO Kernel Scheduler. While I've only tested this on CM9, it should work on ANY rom with init.d support and Defy 2nd-init Bootmenu....meaning all CM7\9 and Miui roms. I'm unsure if MS2Ginger and Stock Froyo have init.d support. It also undervolts the rom to [email protected], [email protected], and [email protected] Those values work fine with CM9 on my phone, meaning no fc's due from being too undervolted.
To install, simply flash the zip in cwn and you're done. Wiping Cache and Dalvik Cache isn't necessary.
To use the Governors, select the governor in the CM Performance Menu and select apply on boot, or use a CPU Governor program from the market. I recommend No Frills CPU Control --- its free, no ads, no bs permissions, and you can select the io scheduler.
To use the SIO Kernel Scheduler, install No Frills Cpu Control from the market and select SIO (or noop) from the bottom menu.
I haven't used SIO very much (5-10 mins now), but it seems to be working well. The noop scheduler works great, and is what I normally use; but I've always read good things about SIO (and wanted to use it), so I thought I'd include it as well.
I'd give thanks to the authors of the Governors and Schedulers, but I have no idea who wrote them....I only found them in Beanstown106's DroidX Miui V4 rom and they happen to work wonderfully on the Bravo.
UPDATE Post
SimpleOverclock
An alternative to No Frills CPU Control with profile support, apply on boot, io changer, governor changer, & more features to come. Probably going to be my new overclock app, need to test for more than a few minutes.
My Little Experiment
I uploaded the governors here for the Bravo, and to Mediafire for the Defy. In the first 2 hours of posting -- 6 Bravo downloads to 45 Defy Downloads (and a page full of posts). Not very surprising, but interesting none-the-less.
Click to expand...
Click to collapse
wow you are amazing skeevy420 to try.....
mataflakitas said:
wow you are amazing skeevy420 to try.....
Click to expand...
Click to collapse
Don't use the V2, I uploaded the wrong file. Its fixed now with 2.1 attached to the first post.
skeevy420 said:
Don't use the V2, I uploaded the wrong file. Its fixed now with 2.1 attached to the first post.
Click to expand...
Click to collapse
Ok your best friend I hope I will not have problems updating....
mataflakitas said:
Ok your best friend I hope I will not have problems updating....
Click to expand...
Click to collapse
You won't. The script crapped out on the first command.....I left in a single space and forgot to put () around the code. It was fixed on my phone when I tested it, but I uploaded my pc's first copy (which was bad) by mistake.
skeevy420 said:
You won't. The script crapped out on the first command.....I left in a single space and forgot to put () around the code. It was fixed on my phone when I tested it, but I uploaded my pc's first copy (which was bad) by mistake.
Click to expand...
Click to collapse
Ok best friend did not move to my device I am a newbie and do not want to damage it ....
skeevy420 friend buy my wife a cell phone is locked you can help me unlock it, now I live in mexico the phone is a Samsung 4G Exhibit II, or I can assign any web page that does not cost
mataflakitas said:
Ok best friend did not move to my device I am a newbie and do not want to damage it ....
It won't damage it. In fact, you'll get really good battery with it. I really recommend using this.
skeevy420 friend buy my wife a cell phone is locked you can help me unlock it, now I live in mexico the phone is a Samsung 4G Exhibit II, or I can assign any web page that does not cost
Click to expand...
Click to collapse
If it requires calling ATT then no, I don't have the account's password.
skeevy420 said:
If it requires calling ATT then no, I don't have the account's password.
Click to expand...
Click to collapse
skeevy420 the company's phone is T-MOBILE
You know someone from that company
mataflakitas said:
skeevy420 the company's phone is T-MOBILE
You know someone from that company
Click to expand...
Click to collapse
No, only Verizon. But she's my friend's wife and a total ***** who wouldn't help.
skeevy420 said:
No, only Verizon. But she's my friend's wife and a total ***** who wouldn't help.
Click to expand...
Click to collapse
jajaja do not worry I hope to find someone who can help me...
I figured that I'd let you all know that Epsylon3 is going to add BOOSTEDassV2 (boosted) to the bootmenu, and its already supported with his Touch Recovery. No eta on anything, but its good news.
I'm loving the BOOSTEDassV2 governor! I have my voltages a bit high right now and I'm still getting great battery life with the really slick scaling. Thanks a ton for these!
sdrawkcab3 said:
I'm loving the BOOSTEDassV2 governor! I have my voltages a bit high right now and I'm still getting great battery life with the really slick scaling. Thanks a ton for these!
Click to expand...
Click to collapse
Me too. I was using them for about a week before I released them. I didn't realize how good they were until I installed CM9 2012\05\12 without them and used conservative. Boosetdass stock runs more efficient and smoother than a heavily tweaked conservative (which I usually get good results with).
I'm just glad that they picked up support from Epsylon3.
I'm currently working on an init script to tweak the BOOSTEDassV2 and smartassv2 settings like the other governors have in the bootmenu. Placing them in 04govandio causes boot to freeze, so I'm gonna make a 98govloader (pick governor) 99asstweaker (tweak smart\boosted) and go from there.
While Epsy is adding them into the bootmenu, there's no telling when Quarx will merge in those changes and provide a new build with them. Besides, its nice having a script that's easy to edit.
skeevy420 said:
Me too. I was using them for about a week before I released them. I didn't realize how good they were until I installed CM9 2012\05\12 without them and used conservative. Boosetdass stock runs more efficient and smoother than a heavily tweaked conservative (which I usually get good results with).
I'm just glad that they picked up support from Epsylon3.
I'm currently working on an init script to tweak the BOOSTEDassV2 and smartassv2 settings like the other governors have in the bootmenu. Placing them in 04govandio causes boot to freeze, so I'm gonna make a 98govloader (pick governor) 99asstweaker (tweak smart\boosted) and go from there.
While Epsy is adding them into the bootmenu, there's no telling when Quarx will merge in those changes and provide a new build with them. Besides, its nice having a script that's easy to edit.
Click to expand...
Click to collapse
skeevy420 wow I have really wanted to try that on my motorola bravo....
New version up.
Removed blank bootmenu folder--caused Touch Recovery issues
Cleaned up init script to almost match Epsylon3's new overclock script
Removed unsupported lines from init script
Added all Bravo SIO commands into init script
Added SD Card Cache Tweak
skeevy420 said:
New version up.
Removed blank bootmenu folder--caused Touch Recovery issues
Cleaned up init script to almost match Epsylon3's new overclock script
Removed unsupported lines from init script
Added all Bravo SIO commands into init script
Added SD Card Cache Tweak
Click to expand...
Click to collapse
skeevy420 which I recommend you smartassv2 governor or BOOSTEDassV2 ...?
mataflakitas said:
skeevy420 which I recommend you smartassv2 governor or BOOSTEDassV2 ...?
Click to expand...
Click to collapse
BOOSTEDassV2
On another note -- I managed to fully compile Patchrom MIUI v4 with Quarx CM9 2012\05\12, but ALL MIUI apps force close. It does fully boot, but it doesn't work....Damn I wish I knew just a bit more about coding.
skeevy420 said:
BOOSTEDassV2
On another note -- I managed to fully compile Patchrom MIUI v4 with Quarx CM9 2012\05\12, but ALL MIUI apps force close. It does fully boot, but it doesn't work....Damn I wish I knew just a bit more about coding.
Click to expand...
Click to collapse
We skeevy420 sure that you can not ask for help to master wajik
mataflakitas said:
We skeevy420 sure that you can not ask for help to master wajik
Click to expand...
Click to collapse
I sent him a few PM's with no response back; same with Quarx, but not about MIUI.
skeevy420 said:
I sent him a few PM's with no response back; same with Quarx, but not about MIUI.
Click to expand...
Click to collapse
skeevy420 no longer carries the [ROM] [MIUI] Pikachu Edition 2.4.20b * Rom For Lovers *
because....
Hi everybody. First of all I'm not developer. I just compile the latest 3.0.50 Virtuous Kernel with smartassV2 and lazy governors for myself but I decide to share it. I was really surprised when I saw only vanilla governors without the new modern and fancy smartass, lagfree, interactivex etc. On my old G1 smartassV2 give really good improve.
If someone doesnt know what are the governors in kernel - please read here.
If somebody wants to test it I will appreciate a lot some feedback. If the result from test isn't so satisfying I will pimp a bit the governor for more battery friendly settings.
My final idea is to pull the kernel with more from the good governors lagree, interactiveX and maybe Intellidemand and then to make pull request. I'm open for feedback and suggestions before commiting the changes.
Install:
Download kernel_with_governors.zip for sense roms and place it on sdcard. Flash into recovery. It's all! Enjoy of your new governors.
Change the covernor:
I recommend for changing the governors using of No-frills CPU Control , AnTuTu CPU Master (both of apps allow scheduler changing) or SetCPU ( search in forum for free version or donate in the market )
Setup:
I feel best performance with smartassV2 governor and deadline scheduler!
My Sources
My GitHUB
update 01.10:
Kernel code name "Hushi" - this kernel deserve some name
Implement DMA Buf - the biggest change in this release. More about Buffer Management
A lot of patches - For more info checkout my github
update 15.08:
Switch to SLOB allocator instead of SLAB
Used latest CB toolchain
update 30.06:
Added force fast charge patch!
notes to get it working :
1 Install Fast Charge app /it is free/
2. The most important - toggle fast charge on and then plug the pc cable otherwise fast charging don't work! /don't be noob like me/
update 24.06:
Added Row Scheduler
Added FIFO Scheduler
update 08.03:
Updated cpu frequency
Added patch to allow lower wifi signals
update 13.01:
Added Lionheart governor
Added interactiveX governor
Added patch for enable swaptoken only when swap is full
Build with CB toolchain instead of linaro
update 12.01:
SmartassV2 governor is set to be default instead ondemand
Added lagfree governor
Enabled BFQ scheduler by request
Added Patch for release swapcache more aggressively
Reboot phone 5 sec after update the kernel
Thanks to:
Linus Torvalds
Virtous Team
yozgatg
-ck
Linaro Team
Sourcery CodeBench
ps I get the kernel sources from yozgatg's git if somebody know more recent repository please to tell me.
ps2 Please have in mind - the zip isn't signed.
hey thanks for the added governors, in the gen y visionx r3 thread qriozum posted a compiled kernel that was v3.0.56.1 post #1489 you could probably ask him where his git is. also if you could, it would be nice to see a kernel with 2 way call recording, as i have heard that its easy to implement in the kernel.. but thanks for this.
btw, just saw that in his sig he has 3.0.57, also check his post history.
also, if you could include the new bfq scheduler and allow the minimum clock speed to be set to 128mhz, that'd be great. thanks!
pyrorob said:
hey thanks for the added governors, in the gen y visionx r3 thread qriozum posted a compiled kernel that was v3.0.56.1 post #1489 you could probably ask him where his git is. also if you could, it would be nice to see a kernel with 2 way call recording, as i have heard that its easy to implement in the kernel.. but thanks for this.
btw, just saw that in his sig he has 3.0.57, also check his post history.
also, if you could include the new bfq scheduler and allow the minimum clock speed to be set to 128mhz, that'd be great. thanks!
Click to expand...
Click to collapse
Thanks for reply. I will ask qriozum for the newer sources For the scheduler I don’t think the bfq is good chose because noop and deadline are more battery frendly than it, or if you use swap cfq work better with swap defragmentation For minimum clock speed I must research more if this is possible Thanks again.
Thanks for making this
Is this kernel flashable on aokp vision milestone 6 (ICS 4.0.4) since it has 2.6.35.14 kernel?
Thanks
ilbeppez said:
Thanks for making this
Is this kernel flashable on aokp vision milestone 6 (ICS 4.0.4) since it has 2.6.35.14 kernel?
Thanks
Click to expand...
Click to collapse
I thins so. I use gen y visionx r3 (ICS 4.0.4). Try it but make backup before flash just in case
Thanks, have this kernel running with viperZ rom. It respons very wel, seems more stable. Will test for some days
ineedone said:
Thanks, have this kernel running with viperZ rom. It respons very wel, seems more stable. Will test for some days
Click to expand...
Click to collapse
Great, I don’t have really good experience with viperZ rom. For me was a bit slow and laggy I planning to improve few options tonight for more performance but first I will test them.
I don't know if Virtuous Kernel maybe it's only for Sense based roms and not AOSP like cyanogen / aokp..
someone already tried this on other aosp roms?
ilbeppez said:
I don't know if Virtuous Kernel maybe it's only for Sense based roms and not AOSP like cyanogen / aokp..
someone already tried this on other aosp roms?
Click to expand...
Click to collapse
I dont think so. But if you are disturbed about it the safest way is to do backup in the recovery and if something goes wrong just restore the backup I rarely test new roms but before flash every time I make fresh backup of my current rom if I dont like the new one restoring is easy
there are big differences between sense-kernel and aosp-kernel... shouldn't work without trouble!
alexinc said:
there are big differences between sense-kernel and aosp-kernel... shouldn't work without trouble!
Click to expand...
Click to collapse
Huh sad news in this case. Can you give me something to see more about those differences?
Neo2SHYAlien said:
planning to improve few options tonight for more performance but first I will test them.
Click to expand...
Click to collapse
Lookin forward to it. Can you tell me what tweaks you've used?
I've not yet supercharged it , do you think this is a good idea, give improvement? Will try anyway just want your opinion
ineedone said:
Lookin forward to it. Can you tell me what tweaks you've used?
I've not yet supercharged it , do you think this is a good idea, give improvement? Will try anyway just want your opinion
Click to expand...
Click to collapse
Fo sho big :good: for supercharging. I use it from very log time About the improvements are only kernel related - first i will remove some unnecessary options like himem support( it's needed for system with 4G and more ram ) and some formats this will decrease a bit size and boot time(aron few ms), also I will play with CONFIG_HZ value and enabling of sysvipc, cgroups and bfq scheduler too
Beastmode mod kernel
Here is the github for beastmode mod kernel :
https://github.com/thachtunganh/beastmode-1.5/
Try compiling it for vision.
Updates and so...
Updated version with lagfree governor, BFQ scheduler and patch for Patch for release swapcache more aggressively is available.
For next version i plan to add ck's Brain **** Scheduler (BFS), interactiveX governor and some ck's memory and swap management patches.
All feedbacks and suggestions are welcome!
ajhavery said:
Here is the github for beastmode mod kernel :
https://github.com/thachtunganh/beastmode-1.5/
Try compiling it for vision.
Click to expand...
Click to collapse
I will try but right now I don't have enough time for solving drivers issues ( actually I'm weak kernel dev ). Thanks for source.
There is also a thread for the Beast Mode Kernel in DHD section, seems to be very interesting. Might help as well.
http://forum.xda-developers.com/showthread.php?t=2049368
[KERNEL][GPL][3.0.y][Beast Mode MOD][v0.4][30/12/2012]
Sent from my HTC Desire Z using xda app-developers app
olobex said:
There is also a thread for the Beast Mode Kernel in DHD section, seems to be very interesting. Might help as well.
http://forum.xda-developers.com/showthread.php?t=2049368
[KERNEL][GPL][3.0.y][Beast Mode MOD][v0.4][30/12/2012]
Sent from my HTC Desire Z using xda app-developers app
Click to expand...
Click to collapse
Thanks. Yes in quick view I saw a lot interesting things, later will dig more deep in the thread.
I just flashed this kernel on my DZ with aokp,
booted and restarted like the description,
testing it right now
ok data / phone works,
wifi is not activable, not working at all
I'll remove the battery and reboot.
edit nothing to do, still not working,
the toggle in notification bar is grey out and i'm having now the text scrambled on all icons.
I'm restoring
I think it's because this kernel is for sense based roms.
Maybe you sould try to compile this from cyanogen : http://forum.xda-developers.com/showthread.php?t=1492461
source here : https://github.com/jerl92/htc7x30-3.0
thanks
Can this kernel work with virtuous sense 2.0 gb??
Sent from my HTC Vision using xda app-developers app
ilbeppez said:
I just flashed this kernel on my DZ with aokp,
booted and restarted like the description,
testing it right now
ok data / phone works,
wifi is not activable, not working at all
I'll remove the battery and reboot.
edit nothing to do, still not working,
the toggle in notification bar is grey out and i'm having now the text scrambled on all icons.
I'm restoring
I think it's because this kernel is for sense based roms.
Maybe you sould try to compile this from cyanogen : http://forum.xda-developers.com/showthread.php?t=1492461
source here : https://github.com/jerl92/htc7x30-3.0
thanks
Click to expand...
Click to collapse
Sad news but will be easy to add all modifications to jerl92's repo. Expect soon version and for aokp Can I ask you for your /proc/config.gz file?? I have need to see compilation options for this kernel maybe and the are different too.
Steven How said:
Can this kernel work with virtuous sense 2.0 gb??
Sent from my HTC Vision using xda app-developers app
Click to expand...
Click to collapse
I don't think so. This is kernel for ICS. If you want test with backup and feedback, but I expect issues with GB roms
Disclaimer: I am not responsible for your broken phone , broken memory card, etc. All my kernels I test first on my own phones , and then upload here
If you like my works please do not forget donate to me(PayPal account you may find in my profile)
Very often people not read full description(then write me to email "device not start, help me" even in the middle of the night) therefore write here with giant words:
UNLOCKED BOOTLOADER REQUIRED OTHERWISE DEVICE CAN'T START WITH CUSTOM KERNEL (YOU GET USB LOGO PICTURE OR TO YOU THROW INTO RECOVERY OR BOOTLOADER)
I never add fake overclock and overclock, because for now(or forever) no method for real overclock and underclock
Random reboots for most users probably fixed in 16.04.2016 and higher
For max stability I recommend to use Interactive governor
Kernel features:
1) USB Mass Storage Support
2)
3) DT2W support (to activate it, you should install Zenmotion)
4) KVM support (Kernel Virtual machine for Intel)
5) Added support of init.d. scripts
6) Added support of exFAT file system for external sd card.
7) ZRAM is disabled for old versions, on version of December 6 and higher- ENABLED.
8) Added CD emulating feature
9) Added SWAP support(need create swap partition on sdcard)
10)
12) Add more governors and I/O schedulers
13) USB-HID mouse & keyboard function(required USB Keyboard app from GPhttps://play.google.com/store/apps/details?id=remote.hid.keyboard.client&hl=en)
14) Support joysticks (DragonRise, Inc ang others)
15) Add more TCP IPv4 congestion algorithms (May change via TricksterMod or Kernel Auditor apps)
16) Reduce min display backlight for autobrightness. For use min backlight level you should to use autobrightness and set it to the left
Deprecated features:
1. Overclock to 2000 Mhz (for A501CG only) and Overclock to 2400 Mhz (for A500CG only). Idea and work by @TheSSJ (it have been removed since 26.12.2015)
2. Based on Asus Zenfone 2 ZE551ML 2.20.40.44(more than 50%) + Asus Zenfone 6 3.24.40 sources
3. Underclock to 667 Mhz. Idea and work by @TheSSJ
4.Hotplug for all governors
5. Frandom Linux kernel generator
Note: This kernel will work on stock Lollipop firmware only like 3.24.40.87, 3.24.40.78 or 3.23.40.60 or 3.23.40.52
This kernel was created by BORETS24 So if you need more information you can pm to him.
How to flash this kernel:Method 1(via PC)Step 0:
Bootloader unlock is required for every custom rom. You can use this tool for unlock:
https://drive.google.com/file/d/0B-Fin8UxrD6PRU9MM1lQZkV0SG8/view
Step 1:
You should download files for flashing:
ADB v1.0.32: Download from Google Drive
Step2:
You should reboot your phone in the droidboot mode. (turn off you gadget then press Turn off button and volume + button)
Then go to the ADB folder and hold Shift + Right Mouse button and write this command:
Code:
fastboot flash boot new_bootXX.XX.img
,where XX.XX- numbers after words "new_boot"
Step3:
Reboot to Android.
Method 2(through CWM/TWRP, without PC)1. Download Flashable ZIP archive on phone
2. Go to recovery mode
3. Click Install ZIP and choose this archive
4. Then reboot
Archieves You make take from this post http://forum.xda-developers.com/showpost.php?p=64640638&postcount=364(Thanks to @Don No 1)
How to install Zenmotion:(it needed for DT2W)1) Download this file (asus.hardware.touchgesture.double_tap.xml) :
https://drive.google.com/file/d/0B-Fin8UxrD6PWWRBT1gwak16Tnc/view?usp=sharing
2) Put this file into system/etc/permissions
Set file permissions. It is a 0644 rw- r-- r--
3) Reboot the phone
4) Find Zenmotion in the Settings and activate it.
(It will work if you flash this kernel)
Changelog:
25.10.2016
I not remember that I removed, let's start that I changed and added
USB Mass Storage mode
Removed few unstable governors
I started to compile with use Zenfone 2 source code for Marshmallow
Existed governors from 6.0.1 source
Removed lz4- caused bugs, drain battery, very slow interface
Added bootboost feature into ramdisk such as Zenfone 2
Now drain battery less and interface speed is high
12.06.2016
Reduce min display backlight brightness to 5(no need to set to 2, no difference between 5 and 2- I checked).For use min backlight level you should to use autobrightness and set it to the left
ZRAM now turn on automatically only for 1 Gb RAM devices, for 2 Gb it disabled by default
Return to "1 core per modules" CPU mode
Return Interactive Pro and Intel governors
Remove InteractiveX and Hotplug governors(sometime caused problems)
Replace WI-FI from module into kernel
03.06.2016
Full NTFS support for SD card
NTFS OTG full support by sibling Asus File Manager(read/write), from others file managers you can to see OTG NTFS devices, may see OTG NTFS devices from file chooser but you can't edit data. But you can edit platform.xml via NextAPP SDfix and can write on NTFS OTG devices with any apps
14.05.2016
Full ExFAT SDcard support such as stock kernel(Now you can see ExFAT sdcard in file chooser, can modified data even without Next APP SDfix)
Remove UKSM and disable KSM
16.04.2016
Fixed: restore signal after long dissapear
Fixed: random reboots in phone calls
Standart processor mode "2 cpus per module"
Remove Intel, Lagfree governors and FIFO scheduler(caused reboots)
Compile with standart GCC 4.9, remove -O3 optimization(unuseless, placebo effect)
Add idle from Linux 4.6
17.03.2016
LZ4 kernel compress
LZ4 zram compress/decompress
Remove Hotplug(caused reboots, overheats) driver and return Hotplug governor
Speed-up interface
More less battery drain
Compile with SaberMod 4.9.3
Others optimizations
05.03.2016
Added again hotplug driver but modified, cores not jumping, not dancing, strongly CPU0+CPU1 always online
Approximately 90% sibling source 3.24.40
Hybrid ramdisk from 87+60 firmware
Some changes in dt2w code
Fixed CD emulation
14.02.2016
Based on Asus Zenfone 2 ZE551ML 2.20.40(more than 50%) + Asus Zenfone 6 3.24.40 sources, remove hotplug driver, return Hotplug governor
06.02.2016
Hotpluging for all governors via MSM hotplug driver(I set 2 cores always online by default, you may tuning this driver via Kernel Auditor, point CPU Hotplug), possible fix the impossibility of restoring the network signal after a long stay outside the network, remove Hotplug governor(is no longer needed)
31.01.2016
Add Hotplug governor and set it by default, without load on CPU 1,2 or 3 cores will go to offline https://www.youtube.com/watch?v=WBbCBahSgrM&feature=youtu.be
30.01.2016
Remove hotplugging from Interactive governor again, add InteractiveX V2 governor with adaptation for Quad core devices( 1 phisical core= 2 threads CPU go to offline, when screen off)
27.01.2016
Interactive governor from Asus ZenPad S 8.0 with adding hotplugging(2 threads=1 core go to offline, when screen off), underclock to 533 MHz, many code and drivers from source Asus Zenfone 2 ZE500CL, Ofast optimization
19.01.2016
Add and turn on Ultra kernel samepage merging(UKSM) technology a place of KSM, underclock to 450 MHz, may be fixed all random reboots besides during long phone calls, when dt2w is on(or fix? I don't know)
16.01.2016
Use new source code 3.24.40
Tweak Interactive governor: hispeed_freq and touchboost_freq down to 1333 Mhz
09.01.2016
May be, fix all random reboots
04.01.2016
Fixed freezes and reboots on third-party governors, when connection speed faster than 20 Mbit/s, return hotplugging to Interactive governor, return Intel and Yankactive governors, some bug fixes
02.01/2016
Compile without Ofast optimization, removed Hotplugging from Interactive governor, removed Yankactive governor, may be, this actions fix random reboots.
31.12.2015
Compile without Ofast optimization, processor works now in '1 core per modules' mode, now disable 3 core(3 threads), when screen off, on Interactive governors, try at random fix reboots on all version of devices
28.12.2015
Try to fix reboots on 1 Gb RAM modifications(return stock process drivers)
28.12.2015
a)Change toolchan from stock GCC to SaberMod 4.8.5
b) Add Hotpluging to Interactive governor, when screen off
c) Add F2FS support
d) Fix some warnings during compilations
25.12.2015
Attempt to fix screen freeze or reboots during long phone calls: change process.c driver on modifity driver from Zenfone 2. Read about it here https://github.com/kirananto/ZENFONE2/commit/044ad3da5263ba256a59b517e96a272b4e3f19f6, Fix almost all warnings in proximiry/lightsensor driver "ISO C90 forbids mixed declarations and code" during compiling, remove "fake" overclock
23.12.2015
Fix freeze and reboots of device, when chaging governors and/or schedulers, add more TCP IPv4 congestion algorithms and set Westwood by defauls in place of stock Cubic
Add some joysticks support, now may use device as keyboard and mouse for PC, move KVM from kernel to modules
15.12.2015
Underclock to 316 MHz, add Adaptive, Yankactive(with Hotplugging implementation by @TheSSJ] ) and conservativeX governors
12.12.2015
Add if.bin into kernel, to attempt fix screen freezing, push also if.bin to system/etc/firmware and reboot phone.
if.bin
11.12.2015
1. Add frandom Linux kernel generator
2. Add Bioshock, Lagfree, lionheart, Wheatley governors
3. Add BFQ, SIO, SIOplus, FIFO, FIOPS, VR I/O schedulers
06.12.15
Add ZRam support
10.11.15
1. Add SWAP support
2. Kernel build with Ofast optimization.
Now I will upload new versions on Yandex Disk
https://yadi.sk/d/tBN8eYlVr3mVZ
XDA:DevDB Information
Custom Lollipop kernel for Zenfone 5 & Zenfone 6 by BORETS24(Intel only), Kernel for all devices (see above for details)
Contributors
tank0412, BORETS24
Source Code: https://github.com/BORETS24/Kernel-fo-Zenfone-6-by-BORETS24
Kernel Special Features:
Version Information
Status: Stable
Current Beta Version: 1.0
Created 2015-11-02
Last Updated 2016-10-25
Bugs:
Some users reported that they have random reboots or screen freezes after call.
This issue have not solved yet.
Btw @tank0412 did u tried contacting borets if he can update this kernel for rr rom [emoji14]
Sent from my ASUS_T00J using Tapatalk
no_name said:
Btw @tank0412 did u tried contacting borets if he can update this kernel for rr rom [emoji14]
Click to expand...
Click to collapse
Yeah. I drop him a line on 4PDA. It looks like he stoped developing because he do not have device and he can not fix freezes after call + random reboots.
Actually in his kernel there's no freeze btw I think if he can release source then someone may work on it to make it compatible with rr rom ?
Sent from my ASUS_T00J using Tapatalk
no_name said:
Actually in his kernel there's no freeze btw I think if he can release source then someone may work on it to make it compatible with rr rom
Sent from my ASUS_T00J using Tapatalk
Click to expand...
Click to collapse
But he did this yesterday
https://github.com/BORETS24/Kernel-fo-Zenfone-6-by-BORETS24
Wow great ?
Sent from my ASUS_T00J using Tapatalk
What apps can i use to underclock overclock this kernel?
geepee410 said:
What apps can i use to underclock overclock this kernel?
Click to expand...
Click to collapse
Kernel auditor.
But this kernel has a default underclock/overclock. (400mhz/2000Mhz)
tank0412 said:
Bugs:
Some users reported that they have random reboots or screen freezes after call.
This issue have not solved yet.
Click to expand...
Click to collapse
Hi mate I am using this custom kernel and dt2w and its in ON state for three days now and I can confirm I don't have any freezes or reboots.... I had flashed internal data, system and cache before installing, and also had first installed. 44. Version KitKat..... During installing KitKat I relocked boot loader and flashed stock recovery. Then I installed. 54 version then lollipop. 60 and finally. 78 lollipop.. After this i unlocked bootloader and flashed twrp... Then flashed custom kernel and zen motion, no lags [emoji2]. Only my phone wakes everytime when I am on 2G data enabled and WiFi off..
Sent from my ASUS_T00F using Tapatalk
tank0412 said:
But he did this yesterday
https://github.com/BORETS24/Kernel-fo-Zenfone-6-by-BORETS24
Click to expand...
Click to collapse
U should share this to Quanqanh
kunalshah912 said:
Hi mate I am using this custom kernel and dt2w and its in ON state for three days now and I can confirm I don't have any freezes or reboots.... I had flashed internal data, system and cache before installing, and also had first installed. 44. Version KitKat..... During installing KitKat I relocked boot loader and flashed stock recovery. Then I installed. 54 version then lollipop. 60 and finally. 78 lollipop.. After this i unlocked bootloader and flashed twrp... Then flashed custom kernel and zen motion, no lags [emoji2]. Only my phone wakes everytime when I am on 2G data enabled and WiFi off..
Sent from my ASUS_T00F using Tapatalk
Click to expand...
Click to collapse
Hello there heheh i can see rr members here hahah
Yerp i am using it for 2 days, everything ok. Only screen freeze when temp high up to 42 degree.
Might be bootloader unlock. Later will try relock back and see wat will happen
Sent from my ASUS_T00J using XDA Forums
mshazrul82 said:
Hello there heheh i can see rr members here hahah
Yerp i am using it for 2 days, everything ok. Only screen freeze when temp high up to 42 degree.
Might be bootloader unlock. Later will try relock back and see wat will happen
Sent from my ASUS_T00J using XDA Forums
Click to expand...
Click to collapse
For relocking you need to install stock recovery
Sent from my ASUS_T00F using Tapatalk
@quanganh2627 if you interested in sources of borets kernel then you can see sources are released by him and one thing to tell you that in his kernel "no freeze after call" or any such type of bug,his kernel is supper smooth so maybe you can do something to make it work on our rr rom ?
Sent from my ASUS_T00J using Tapatalk
hey @tank0412 what new on update 2/11 ,sir ?
ChungVan said:
hey @tank0412 what new on update 2/11 ,sir ?
Click to expand...
Click to collapse
Nothing. i just created own topic for it on XDA.
Is this the same kernel that you post in the rr thread? @tank0412
myrul said:
Is this the same kernel that you post in the rr thread? @tank0412
Click to expand...
Click to collapse
Yeah, it is a same.
kunalshah912 said:
For relocking you need to install stock recovery
Sent from my ASUS_T00F using Tapatalk
Click to expand...
Click to collapse
R u using stock .78 with dt2w kernel, if yes then what type of settings r u using as my battery is draining very fast and r u also using power saver? Please reply.
Thanks
tank0412 said:
Bugs:
Some users reported that they have random reboots or screen freezes after call.
This issue have not solved yet.
Click to expand...
Click to collapse
with this kernel , no random reboots or screen freezes after call.
i think it have only one problem was limited 3 minutes when call . after 3 minutes , the call will auto end
Welcome To NegaLite HW+ Kernel!!!
I AM NOT RESPONSIBLE FOR ANY DAMAGES! Use At Your Own Risk!
This Also Voids Your Warranty!
Features:
F2FS Support(Module) - Big Thanks To r3pwn
GCC Uber 4.9.4 Toolchain
-o3 Optimized
Turbo 4x Zram(Module)
msm_hotplug
All Governors Boosted
CPU OC Up To 1.3 Ghz
GPU OC Up To 533MHz
FSB UC To 320MHz
Undervolted - 25mv Lower
All Cores Active
init.d Support
Configurable Tweak Scripts
Sysctl Tweaks
Memory Tweaks
Build.prop Tweaks
Busybox 1.27.0 Included
ADB Debugging Auto Enabled
Auto-Root Included
Kernel Adiutor 4 Wear App Included
Scripts Included In Source For Simple Compiling(Build The Kernel Yourself If You Want)
Custom Governors:
Darkness, Intelliactive, Intellidemand, InteractiveX, PegasusQ, Smartmax, ThunderX
Custom Schedulers:
VR, SIO, FIOPS, FIFO And ZEN
------------------------------------------------------------------------------------------------------------------------------
Downloads:
Nothing Needs To Be Done Prior To Flashing!!!
Just Do This:
1. Push Zip To /sdcard/ Via ADB
2. Flash zip In Recovery
3. Done (Enjoy!)
WEAR 1.5(Marshmallow)
negalite_kernel_HW_7eca452-1.5.zip - 1/12/2017
WEAR 2.0(Nougat) - Official Release Compatible
negalite_kernel_HW_dffc4c0-2.0.zip - 6/7/2017
Commit Log:
https://github.com/Negamann303/Huawei-W-1.5-2.0/commits/master
------------------------------------------------------------------------------------------------------------------------------
Source: Huawei-W-1.5-2.0
Boot Battery/Performance!!!
Advanced Users: (Optional)
You Can Have Pre-Configured Settings On Kernel Flash
Download One Of The Zips Below
Rename To bootperf.zip
Push To Your SDcard
Flash The Latest Kernel
Enjoy!
Nega's Tweaks:
battery_v6_bootperf.zip - Battery Save - 8/03/2016
performance_v6_bootperf.zip - Performance(See What This BadBoy Can Do!) - 8/03/2016
PablosMule_bootperf.zip - Pablo71 Has You Covered, Make Sure To Thank Him!
On The Fly Config Switching
Push bootperf.zip And The Flasher.zip Below To SDCard And Use Flasher In Recovery
BootPerf_Flasher.zip
Download link doesn't seem to be working...
bmg1001 said:
Download link doesn't seem to be working...
Click to expand...
Click to collapse
Fixed, thanks
Thanks for your efforts. Link is broken bro.
Huawei-Watch-3.10-mr1 is it lollipop-wear-release-1?
janjan said:
Thanks for your efforts. Link is broken bro.
Huawei-Watch-3.10-mr1 is it lollipop-wear-release-1?
Click to expand...
Click to collapse
It should be fixed. This kernel is for Marshmallow
This seems interesting. Could you explain how I move .zip files to and from Wear?
I'm rooted with TWRP on wear, but got no USB mount. How do I then move the files?
Thanks in advance
---------- Post added at 08:57 AM ---------- Previous post was at 08:32 AM ----------
Trying the pull command, but saying it's read only
Faspaiso said:
This seems interesting. Could you explain how I move .zip files to and from Wear?
I'm rooted with TWRP on wear, but got no USB mount. How do I then move the files?
Thanks in advance
---------- Post added at 08:57 AM ---------- Previous post was at 08:32 AM ----------
Trying the pull command, but saying it's read only
Click to expand...
Click to collapse
Worked here. This is the exact command I used: adb push C:\Users\bmg10\Downloads\negalite_kernel_HW_r99c9f93.zip /sdcard/
Did you set TWRP to allow system modifications?
bmg1001 said:
Worked here. This is the exact command I used: adb push C:\Users\bmg10\Downloads\negalite_kernel_HW_r99c9f93.zip /sdcard/
Did you set TWRP to allow system modifications?
Click to expand...
Click to collapse
Was just pushing from standard ADB. Not in TWRP. Suddenly it worked. But thanks
I currently run skin1980's MM kernel ... can I just flash this over it out should I wipe everything? thanks this looks awesome
pablo71 said:
I currently run skin1980's MM kernel ... can I just flash this over it out should I wipe everything? thanks this looks awesome
Click to expand...
Click to collapse
No prerequisites, just flash
Sent from my SM-G935P using Tapatalk
negamann303 said:
No prerequisites, just flash
Click to expand...
Click to collapse
awesome ... zip file loaded to sdcard and rebooting to recovery to flash here we go ... thanks
So far so good! Watch is running really fast and smooth and battery seems to be a bit better than what I got on Skin's kernel, but that might also be cause I factory reset my device when I flashed the kernel (since I was running Skin's kernel before). No issues like random reboots or crashes either. I haven't modified any kernel settings yet though.
Holy sh!t
Thanks!
This is the smoothest experience I have had on this watch so far and I've used all of the things!
loving this kernel to a high degree so far ... it was damn thoughtful of you to include kernel adiutor and make it flashable in recovery. the selection of governors, hotplug profiles and i/o schedulers is top notch (I'm no expert on these matters though I know just a small amount)
Early observations: on your stock settings both my watches don't like waking up on tilt to wake, they usually require a double-tilt to wake up and one watch even locked up and required a reboot BUT adjusting some settings fixed this instantly. I point out though that I did not do a factory reset or wipe any partitions or caches before installing this kernel. I just flashed and started having fun.
currently I'm getting VERY satisfactory performance with the cpu's frequency locked at 787mhz + interactiveX governor + intelliplug's eco-conservative profile + gpu freq max 320mhz with powersave governor + row i/o scheduler with 1024kb read ahead
so far this kernel is badass
pablo71 said:
loving this kernel to a high degree so far ...
Click to expand...
Click to collapse
I was wondering if all the Wear Shell and Tasker commands worked, sine I did not see that it was rooted. Thanks.
With the zram, should we see a reported higher amount of total ram available? What are others seeing?
Sent from my LG-D800 using Tapatalk
Sweet kernel need this for Android Wear 2.0 please dev
pmgnet said:
With the zram, should we see a reported higher amount of total ram available? What are others seeing?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Thanks for making me realize zram wasn't enabled, will be in the next release tonight
eduardozeassesme said:
Sweet kernel need this for Android Wear 2.0 please dev
Click to expand...
Click to collapse
Once wear 2.0 is released, I will move up
Sent from my SM-G935P using Tapatalk
pablo71 said:
loving this kernel to a high degree so far ... it was damn thoughtful of you to include kernel adiutor and make it flashable in recovery. the selection of governors, hotplug profiles and i/o schedulers is top notch (I'm no expert on these matters though I know just a small amount)
Early observations: on your stock settings both my watches don't like waking up on tilt to wake, they usually require a double-tilt to wake up and one watch even locked up and required a reboot BUT adjusting some settings fixed this instantly. I point out though that I did not do a factory reset or wipe any partitions or caches before installing this kernel. I just flashed and started having fun.
currently I'm getting VERY satisfactory performance with the cpu's frequency locked at 787mhz + interactiveX governor + intelliplug's eco-conservative profile + gpu freq max 320mhz with powersave governor + row i/o scheduler with 1024kb read ahead
so far this kernel is badass
Click to expand...
Click to collapse
How can you get your watch rooted? I tried flash some supersu for wear but I cannot start the kernel adiutor.
Just a kernel, based on cm13 sources with additions by highwaystar_ru (many thanks for porting kernel).
Features:
zram enabled
zen, fiops, maple i/o schedulers
bioshock, elementalx, relaxed, chill, wheatley CPU governors
Install instructions: Flash zip from TWRP, but do not wipe caches! Make backup of your current boot.img before flashing for the case if anything goes wrong.
Changelog:
1.0 - added zram
1.2 - ksm, i/o fiops, zen, maple
1.3 - wheatley, despair, elementalx, foxyactive
1.4 - fixes for better optimization
1.4.5 - fixes for interactive governor
1.5 - final optimizations and more fixes for interactive
1.7 - More optimizations, relaxed and chill governors
1.8-1.9 - investigating more deep tweaks and enabling Tegra AES crypto engine
2.0-2.1 - optimizations and bug fixes
Mirror for downloads.
XDA:DevDB Information
FoxyKernel, Kernel for the Xiaomi Mi Pad
Contributors
XeonDead, Star_King12, highwaystar_ru
Source Code: https://github.com/XeonDead/foxy_kernel_mocha
Kernel Special Features: Built with Linaro 4.9.4 TC
Version Information
Status: Alpha
Current Beta Version: 1.9.1
Beta Release Date: 2017-03-16
Created 2017-02-24
Last Updated 2017-03-21
possible dt2w for mipad?
Awesome work :good:
What are the antutu scores with this kernal?
Installation instructions? Fastboot/twrp? Wipes?
How would one revert back to stock kernel if needs to?
Anyhow, has anyone tested this? How are youtube videos going with this? Any microlags every now and then?
thanks for the effort,
I cant believe that mipad will reach till custom kernels
VALRCIEL said:
possible dt2w for mipad?
Click to expand...
Click to collapse
Dt2w will make it to draw power even while seemingly sleeping, but i will look into it.
Tautologica said:
Installation instructions? Fastboot/twrp? Wipes?
How would one revert back to stock kernel if needs to?
Anyhow, has anyone tested this? How are youtube videos going with this? Any microlags every now and then?
Click to expand...
Click to collapse
Sorry for late reply, I've added instructions. Thought something was missing.
Wipes are not required.
AbhaYsinGH007 said:
Awesome work :good:
What are the antutu scores with this kernal?
Click to expand...
Click to collapse
Antutu scores attached.
XeonDead said:
Antutu scores attached.
Click to expand...
Click to collapse
wow, what kind of modification did you do?
what's your kernel's setting?
also, I heard that mipad's ram frequency is limited to 400mhz by xiaomi.
is it unlocked to 900mhz on this kernel?
OoSTARTERoO said:
wow, what kind of modification did you do?
what's your kernel's setting?
also, I heard that mipad's ram frequency is limited to 400mhz by xiaomi.
is it unlocked to 900mhz on this kernel?
Click to expand...
Click to collapse
Yes, RAM frequency is unlocked, that was already on cm kernel.
XeonDead said:
Yes, RAM frequency is unlocked, that was already on cm kernel.
Click to expand...
Click to collapse
thanks for your fast reply
thanks
OoSTARTERoO said:
thanks for your fast reply.
also, if you are interested there's a telegram group about mipad.
(miui smoke dev, highwaystar is on this group)
would you consider joining this group?
Click to expand...
Click to collapse
Sure, thanks!
XeonDead said:
Sure, thanks!
Click to expand...
Click to collapse
i'll leave you a PM
Random reboots ;__; was doing build on ssh
Is it just my settings or kernel?
What logs needed plz tell.
Kenzo se type kiya h
Sudeep Duhoon said:
Random reboots ;__; was doing build on ssh
Is it just my settings or kernel?
What logs needed plz tell.
Kenzo se type kiya h
Click to expand...
Click to collapse
It's being investigated, please tell if you use chill or relaxed governors as they're culprit right now.
XeonDead said:
It's being investigated, please tell if you use chill or relaxed governors as they're culprit right now.
Click to expand...
Click to collapse
Relaxed it was. Will flash again once my build completes.
Thanx for the kernel and nice reply.
Kenzo se type kiya h
Sudeep Duhoon said:
Relaxed it was. Will flash again once my build completes.
Thanx for the kernel and nice reply.
Kenzo se type kiya h
Click to expand...
Click to collapse
Are you also building something? @sundeep
XeonDead said:
Dt2w will make it to draw power even while seemingly sleeping, but i will look into it.
Click to expand...
Click to collapse
thank's maybe can add some screen tweak brightness
and maple i/o as default not stable i changed to zen :good:
Wow that antutu score is impressive, didn't know my Mi Pad is such a powerful device. If only storage memory wasn't so slow... Oh well.
1st MM based rom and now custom kernel? i hope i'm not dreaming
thank you for developing a custom kernel
i hope you can implement OC or any other governors and hotplug like alucard in future updates