Related
I tried upgrading to 7.1, and have tried 3 different ROM's. I even tried going back to 6. Every single ROM told me error code 7 when I tried to flash it. I went about fixing that. So then I was able to flash the ROM and GApps. But then when it goes to boot into the OS all it does is hang on the white Asus screen, reboot, and go back to the white Asus screen. It does that 3 times then goes into recovery. I even tried fixing it with ZE551ML_Modder V3.3. I am running TWRP-3.0.2-0-Z00A.img. This is a Z00A as well. Any help would be greatly appreciated. Thank you.
jaed.43725 said:
I tried upgrading to 7.1, and have tried 3 different ROM's. I even tried going back to 6. Every single ROM told me error code 7 when I tried to flash it. I went about fixing that. So then I was able to flash the ROM and GApps. But then when it goes to boot into the OS all it does is hang on the white Asus screen, reboot, and go back to the white Asus screen. It does that 3 times then goes into recovery. I even tried fixing it with ZE551ML_Modder V3.3. I am running TWRP-3.0.2-0-Z00A.img. This is a Z00A as well. Any help would be greatly appreciated. Thank you.
Click to expand...
Click to collapse
Did you upgraded the bootloader? I would just retrace steps, if not factory reset and try again.
lordpipa said:
Did you upgraded the bootloader? I would just retrace steps, if not factory reset and try again.
Click to expand...
Click to collapse
The bootloader is the recovery right? (At least thats what I always thought). If so then I am running the newest TWRP for it.
http://theflamingskull.com/zenfone2.html
Upgrade your bootloader following the instructions on the .zip package.
This will upgrade your bootloader and flash a compatible TWRP recovery.
lordpipa said:
http://theflamingskull.com/zenfone2.html
Upgrade your bootloader following the instructions on the .zip package.
This will upgrade your bootloader and flash a compatible TWRP recovery.
Click to expand...
Click to collapse
I did all that. Now I am stuck with CM Recovery. I tried using the tool to get TWRP back but its not working. I have to figure out how to push TWRP using ADB.
In modder, return to stock option , flash stock recovery and boot img.
Unlock bootloader in modder, just incase.
Flash twrp, root in modder ..reboot to twrp...install 7.1 and pico gapps
I finally had to go to Ubuntu, run ADB as SU and ADB Sideload an older version of Cyanogenmod. Not a single factory image would work. And not a single one of those Android 7 ROM's would work. They are all broken. I would like to see real proof of one working. That little escapade cost me a lot of time. So until someone comes out with a real CM14 version for the Z00A do not attempt to boot one.
jaed.43725 said:
I finally had to go to Ubuntu, run ADB as SU and ADB Sideload an older version of Cyanogenmod. Not a single factory image would work. And not a single one of those Android 7 ROM's would work. They are all broken. I would like to see real proof of one working. That little escapade cost me a lot of time. So until someone comes out with a real CM14 version for the Z00A do not attempt to boot one.
Click to expand...
Click to collapse
You may have really misunderstood the processes and yes they are allover the place.
i am running CM14.1 lots of people are !
What you probobaly have is LP based CM 13 on WW-4.20 blah blah.165
Then there was a CM13 with MM blobs based on WW-4.21 blah blah .135 MM
I think where you have gone wrong is not unlocking bootloader in 5 LP and upgrading bootloader and unlocking.
if you are on .165 - you could flash stock recovery for .165 -- upgrade to .184 -- unlock bootloader and upgrade to MM then unlock bootloader in MM with modder
Then use the modder to install 7.1 14.1 CM
But judging by the probs you have haD already - just leave it alone :good:
What is WW?
jaed.43725 said:
What is WW?
Click to expand...
Click to collapse
WW is world wide
CN china
JP japan
relating to stock FW from official site .
You know what you are doing re using ubuntu to adb but have the procedure all messed up.
Would you like to get to MM and 7.1 CM14.1 and have a windows PC ? ?
Post a screen shot of build number info you are presently on :good:
Hi,
I am running CYanogenMod 13.0-20360525 UNOFFICIAL tritevzw
Baseband N910VVRU2CPJ2
Build Number: ANdroid 6.0.1 MOB30JN910VVRU2BPA1
Whenever I go into settings and click on "Security" I get a popup box that says"
"Unfortunately Settings has stopped"
To try to fix this I have gone into recovery and wiped dalvik and caches.
Thanks for any help!
plainbum said:
Hi,
I am running CYanogenMod 13.0-20360525 UNOFFICIAL tritevzw
Baseband N910VVRU2CPJ2
Build Number: ANdroid 6.0.1 MOB30JN910VVRU2BPA1
Whenever I go into settings and click on "Security" I get a popup box that says"
"Unfortunately Settings has stopped"
To try to fix this I have gone into recovery and wiped dalvik and caches.
Thanks for any help!
Click to expand...
Click to collapse
What build of CM13 did you flash? Your build number says BPA1, but it should be saying CPF3.
quinciebee said:
What build of CM13 did you flash? Your build number says BPA1, but it should be saying CPF3.
Click to expand...
Click to collapse
Hi quinciebee, thanks fo ryour reply.
I was on ANdroid 6.0.1 MOB30JN910VVRU2 BPA1 and firmware BPA1
Then I wanted to try out Hsbadr's new 7.1.1 Nougat Rom and it required new CPJ2 firmware so I odin'd it in.
I TWRP backed up my ANdroid 6.0.1 MOB30JN910VVRU2 BPA1 build I have been running for months.
Then flashed his newest "EmotionOS" But could not get 4G LTE to work so I restored my 6.0 backup since I cant function on 3G only and no one in these forums was able to help me.
Hope that wasn't too confusing
Oh by the way, I am doing this on a Developer Edition Note 4 on Verizon
When I flashed CPJ2 firmware I used a partial build as explained here:
https://forum.xda-developers.com/no...t/howto-bootloader-unlock-upgrade-to-t3398144
He quotes:
Quote:
"If you're already on unlocked Android 6.0.1 Marshmallow bootloader, you can extract and flash the DevEd partial fimware via Odin to upgrade:
N910VVRU2CPJ2_PartialFirmware_DevEd.tar.md5.7z
This will upgrade the base firmware (NON-HLOS, modem, rpm, sbl1, sdi, and tz) to N910VVRU2CPJ2."
plainbum said:
Hi quinciebee, thanks fo ryour reply.
I was on ANdroid 6.0.1 MOB30JN910VVRU2 BPA1 and firmware BPA1
Then I wanted to try out Hsbadr's new 7.1.1 Nougat Rom and it required new CPJ2 firmware so I odin'd it in.
I TWRP backed up my ANdroid 6.0.1 MOB30JN910VVRU2 BPA1 build I have been running for months.
Then flashed his newest "EmotionOS" But could not get 4G LTE to work so I restored my 6.0 backup since I cant function on 3G only and no one in these forums was able to help me.
Hope that wasn't too confusing
Oh by the way, I am doing this on a Developer Edition Note 4 on Verizon
When I flashed CPJ2 firmware I used a partial build as explained here:
https://forum.xda-developers.com/no...t/howto-bootloader-unlock-upgrade-to-t3398144
He quotes:
Quote:
"If you're already on unlocked Android 6.0.1 Marshmallow bootloader, you can extract and flash the DevEd partial fimware via Odin to upgrade:
N910VVRU2CPJ2_PartialFirmware_DevEd.tar.md5.7z
This will upgrade the base firmware (NON-HLOS, modem, rpm, sbl1, sdi, and tz) to N910VVRU2CPJ2."
Click to expand...
Click to collapse
How did you flash CM13, and did you flash the 09/19 build?
quinciebee said:
How did you flash CM13, and did you flash the 09/19 build?
Click to expand...
Click to collapse
The build date is May 25 2016
Here is a list of roms of that ilk
https://forum.xda-developers.com/devdb/project/?id=12650#downloads
plainbum said:
The build date is May 25 2016
Here is a list of roms of that ilk
https://forum.xda-developers.com/devdb/project/?id=12650#downloads
Click to expand...
Click to collapse
Then I think that's the problem, you'll have to clean flash the 09/19 build.
Delete
quinciebee said:
Then I think that's the problem, you'll have to clean flash the 09/19 build.
Click to expand...
Click to collapse
I flashed to 09/19 build the phone would not boot. I kept getting a rapid glow behind the Blue android mascot.
I then tried to odin the BOG5 firmware and I got errors . rebooted the phone and it wouldnt boot.
Now just bootloops to the samsung screen,
It's borked.
I think I lost Dev Edition and the best I can do is start from scratch?
Not sure where to go now.
plainbum said:
I flashed to 09/19 build the phone would not boot. I kept getting a rapid glow behind the Blue android mascot.
I then tried to odin the BOG5 firmware and I got errors . rebooted the phone and it wouldnt boot.
Now just bootloops to the samsung screen,
It's borked.
I think I lost Dev Edition and the best I can do is start from scratch?
Not sure where to go now.
Click to expand...
Click to collapse
Is the BOG5 firmware stock? If so, you shouldn't have flashed it. If you still have TWRP and root, take these steps to clean flash to CM13.
1. Boot to TWRP, wipe all but your External Storage (SD Card)
2. Flash CM13 09/19 zip
3. Flash the boot image from CM13 07/24
(Click on install image, select the boot.img file, you will then see two choices: boot and recovery, select boot only, then swipe to flash.)
4. Flash gapps and SuperSU zip
5. Reboot
The rapid blinking was happening because you need the boot image from 07/24 in order for the rom to load properly. I'd post the boot image for you, but it exceeds the file size limit. To get the boot image, download the CM13 07/24 build, unzip the file, and extract the boot.img file to your SD card, along with everything else that you want to flash. Let me know if you need me to provide more details on any of the steps.
I can't even get into twrp.
All I can do is get into "Download mode"
I have started a new thread looking for help here:
https://forum.xda-developers.com/no...p-screwed-vzw-dev-ed-software-update-t3530282
plainbum said:
I can't even get into twrp.
All I can do is get into "Download mode"
I have started a new thread looking for help here:
https://forum.xda-developers.com/no...p-screwed-vzw-dev-ed-software-update-t3530282
Click to expand...
Click to collapse
What do you see when you try to boot into recovery?
Hi quinciebee,
I posted this before I borked my phone, before you started helping me.
How I got here was I was trying to upgrade the firmware so I could them flash The ne 7.1.1 "EmotionOS"
I was following the instruction here:
https://forum.xda-developers.com/no...t/howto-bootloader-unlock-upgrade-to-t3398144
Specifically where is says:
"If you're already on unlocked Android 6.0.1 Marshmallow bootloader, you can extract and flash the DevEd partial fimware via Odin to upgrade:
N910VVRU2CPJ2_PartialFirmware_DevEd.tar.md5.7z
This will upgrade the base firmware (NON-HLOS, modem, rpm, sbl1, sdi, and tz) to N910VVRU2CPJ2."
It flashed fine and then I installed the EmotionOS and all went well but I could NOT get 4G LTE to work, only 3G.
So I abandoned it and reflashed a backup of the CM 13 I was running since May 25.
I was good on cm13 but I got errors when I was in settings and tried to go into "Security"
Im all god now and I will be trying to get back to 6.0 and then 7.1.1 after my house guests leave.
The phone is running fine in 5.1.1.
THanks again!
Hello together,
i got a MediaPad M2 801-W. It was running on Android 5.1.1.
So i just downloaded the 6.0 image for it. BUT i downloaded the M2-802Lxxx Version....
I dident know there are differne version of the Tablet....
The Updater just finished fine and the Tablet just started just normal BUT it is now random crashing and restarting the Os.
So i tried to install the correct version back but now the Updater in the os has no Local seetting to select the update.zip.
In Recovery the Updater works but dosent update the correct version.
It is verifying the update and than says "Software install failed".
Is there an other way to update the correct update to the tablet?
Sorry about my bad english....
Best Regards isi
isipisi281 said:
Hello together,
i got a MediaPad M2 801-W. It was running on Android 5.1.1.
So i just downloaded the 6.0 image for it. BUT i downloaded the M2-802Lxxx Version....
I dident know there are differne version of the Tablet....
The Updater just finished fine and the Tablet just started just normal BUT it is now random crashing and restarting the Os.
So i tried to install the correct version back but now the Updater in the os has no Local seetting to select the update.zip.
In Recovery the Updater works but dosent update the correct version.
It is verifying the update and than says "Software install failed".
Is there an other way to update the correct update to the tablet?
Sorry about my bad english....
Best Regards isi
Click to expand...
Click to collapse
Flash this in stock recovery through dload method:
https://drive.google.com/file/d/0B5I_q70mNuR4N3JLTnNDYzBEYTg/view?usp=sharing
Then you need the stock 801W rom, extract the update.app and flash it through dload. Then it should work and flash back to stock.
Thank you but your file has only 21kb is this right?
When i put the file in the dload directorie and boot with power + vol up + down the installer is verifying something installs it to 36% and aborts again. =(
isipisi281 said:
Hello together,
i got a MediaPad M2 801-W. It was running on Android 5.1.1.
So i just downloaded the 6.0 image for it. BUT i downloaded the M2-802Lxxx Version....
I dident know there are differne version of the Tablet....
The Updater just finished fine and the Tablet just started just normal BUT it is now random crashing and restarting the Os.
So i tried to install the correct version back but now the Updater in the os has no Local seetting to select the update.zip.
In Recovery the Updater works but dosent update the correct version.
It is verifying the update and than says "Software install failed".
Is there an other way to update the correct update to the tablet?
Sorry about my bad english....
Best Regards isi
Click to expand...
Click to collapse
Okey for those who did the same **** like me:
First download http://download-c.huawei.com/download/downloadCenter?downloadId=74723&version=273368&siteCode=tw
Than downgrade to this version.
Now you can update to the corect 801-w Android 6.0 version.
Me too install wrong update I have MediaPad M2 801-L, But i downloaded 6.0 the M2-801Wxxx version and got a MediaPad M2 801-W after install update.zip. Updater in the os has no Local setting to select the update.zip. I try downgrade to 5.1.1 M2-801Wxxx version by three buttons, flash stock recovery. But on choose language button "next" not working. Continue try install different stock flash...
Sorry about my bad english....
Just what I needed.
You literally saved my tablet. I had the exact issues (stupidly installed the 801L Marshmallow update on my 801W, which resulted in the non stop rebooting every 5 minutes). Nothing was working and no other roms were being accepted until I came across your post. I made this account just to thank you! The tablet was brand new and was lying boxed and unused for 3 years, so thought I'd use it
Just in the unlikely event anybody else faces this problem, just wanna add one clarification to Isipisi281's original post; to get the first step interim update to happen, make sure you unzip the update file first, then find the update.app file and paste that and it's accompanying folder into the dload folder in your directory, or else the update will fail. The rest is clockwork.
And PS, the M2 runs amazingly after the marshmallow update. Noticeably smoother, snappier and even more frugal with added android features. Highly recommended.
Thanks again!
ajsmsg78 said:
Flash this in stock recovery through dload method:
https://drive.google.com/file/d/0B5I_q70mNuR4N3JLTnNDYzBEYTg/view?usp=sharing
Then you need the stock 801W rom, extract the update.app and flash it through dload. Then it should work and flash back to stock.
Click to expand...
Click to collapse
Hey man - what is the file you shared in this post please?? I need to do the same as is in this thread - revert from 80xL to W version of firmware but the update keeps failing...any idea please??
Sopis said:
Hey man - what is the file you shared in this post please?? I need to do the same as is in this thread - revert from 80xL to W version of firmware but the update keeps failing...any idea please??
Click to expand...
Click to collapse
I don't have the file anymore. Maybe someone in this thread still has it? I'm pretty sure is was the downgrade script to be able to downgrade.
ajsmsg78 said:
I don't have the file anymore. Maybe someone in this thread still has it? I'm pretty sure is was the downgrade script to be able to downgrade.
Click to expand...
Click to collapse
gotcha..it has been a long time ago...well, no matter how I try, I cannot flash anything :/ every FW I downloaded fails...I am lost with this tablet...
Sopis said:
gotcha..it has been a long time ago...well, no matter how I try, I cannot flash anything :/ every FW I downloaded fails...I am lost with this tablet...
Click to expand...
Click to collapse
Yeah, welcome to Huawei world. They don't make it easy to go back to stock on the older devices.
ajsmsg78 said:
Yeah, welcome to Huawei world. They don't make it easy to go back to stock on the older devices.
Click to expand...
Click to collapse
cheers
anyway, do you have any idea how I could do this? as I said, I managed to get back to lollipop, but am still on L version and cannot flash anything over it...any hint is much appreacited...unfortunately, I am not twrp, frp unlocked so fastboot is out of question
So I recently got my honor 7x and I got the bootloader unlock code today. I unlocked the bootloader, installed TWRP and downloaded a custom ROM like I would on my other devices. I'm on EMUI5 and I assumed flashing an android 8.1 ROM would be possible so I wiped my internal storage. After that I tried flashing the rom in TWRP, which gave me some error about the zip not being in the right format. Then I flashed the rom in ADB but the device wouldn't boot up. I'm sitting here with a formatted phone with TWRP on it and a huge headache.
Could someone please help me and tell me how to revert back to stock or how to get a rom back on my device? I have the BND-L21 variant and I was on EMUI5. I'd really appreciate it because I'm kind of freaking out rn.
jetzecazemier said:
So I recently got my honor 7x and I got the bootloader unlock code today. I unlocked the bootloader, installed TWRP and downloaded a custom ROM like I would on my other devices. I'm on EMUI5 and I assumed flashing an android 8.1 ROM would be possible so I wiped my internal storage. After that I tried flashing the rom in TWRP, which gave me some error about the zip not being in the right format. Then I flashed the rom in ADB but the device wouldn't boot up. I'm sitting here with a formatted phone with TWRP on it and a huge headache.
Could someone please help me and tell me how to revert back to stock or how to get a rom back on my device? I have the BND-L21 variant and I was on EMUI5. I'd really appreciate it because I'm kind of freaking out rn.
Click to expand...
Click to collapse
If your still on 5.1 you can't update like that you will have to perform the manual update found here https://forum.xda-developers.com/honor-7x/development/manual-update-to-oreo-beta-emui-8-bnd-t3764509 I think those files can work for your device but try to get the official Oreo update files and proceed
dcraffam said:
If your still on 5.1 you can't update like that you will have to perform the manual update found here https://forum.xda-developers.com/honor-7x/development/manual-update-to-oreo-beta-emui-8-bnd-t3764509 I think those files can work for your device but try to get the official Oreo update files and proceed
Click to expand...
Click to collapse
Thank you for the quick reply! Do you know where I can find the official update files?
jetzecazemier said:
Thank you for the quick reply! Do you know where I can find the official update files?
Click to expand...
Click to collapse
http://pro-teammt.ru/firmware-database/?firmware_model=Bnd-l21&firmware_page=0 from here
Hi,
I just tried to root my Mi Max 3 but got bootloop, what can I do?
I unlocked the device.
Then I flashed TWRP 3.2.0. nitrogen, devcie was encrypted then.
I flashed Magisk 18.1., rebooted, but bootloop.
I rebooted into TWRP again and flashed no-verity-opt-encrypt-6.0.zip and again Magisk 18.1 and rebooted, but bootloop only.
I did factory reset but bootloop only.
What am I suposed to do? Any help from you guys?
Thanks you very much !
download and install the latest twrp from nijel8. Make a wipe and install only a clean rom and magisk. Nothing more. It must work.
Tried magisk 18.0?
I use magisk 18.0 and official twrp 3.2.3.0.
Hi,
it didnt help unfortunately.
I think I first need to flash a stock firmware completely right? Then try another round with the suggested versions by you guys.
I downloaded stock ROM from Xiao Mi Website here: http://en.miui.com/a-234.html
It is named: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global
But when I try to flash it via fastboot mode and the help of Xiao Mi Flash Tool I get an error like this (attachment)
Any help?
Update: I just flashed official full rom named: miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip via TWRP and it didnt show any errors (but TWRP still installed, I expected stock revoery actually?!). I wiped cache and rebooted but still bootloop.
I am really not sure what to do now.
Update 2: I now was able to flash stock rom (nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global) via fastboot mode (error like on screenshot didnt appear anymore, dont really know why) now phone is only booting into stock MIUI recovery and shows a red noteification: "This MIUI Version cant be installed on this device" -> Can anybode give me help please?
Update 3: Tried to unlock again but it fails due to my device is not bound to my MI Account, but how to add it to account as I cant boot it up anymore and go to the settings in android. Or do I need another FULL Rom? I read smth that this error (Rom cant be installed on this device) appears if one is trying to flash Global Rom instead of China ROM? Where to get this one? Dont know the difference actually But my phone had google services preinstalled
I now even downloaded the chinese full rom: Mi Max 3 China Stable ROM 10.0.6.0 – V10.0.6.0.OEDCNFH / MIUI 9 / fastboot / Android Oreo because I think maybe this was originally i nstalled (purchased phone in Indonesia which is black market)
but once I try to flash it, the mix flash tool tells me now erase is not allowed in locked mode. I need to unlock first? but how? Unlock bootloader is not possible due to device is not bound with my mi-account.
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
tobyffm said:
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
Click to expand...
Click to collapse
What base it has, china or global when you get it?
tobyffm said:
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
Click to expand...
Click to collapse
Can't you flash from stock recovery? Download recovery rom matching your stock recovery(china or global), save in microsd. Enter recovery and flash rom.
Edit: sorry, just checked. Not possible to select file from stock mi recovery.
Lecterr said:
What base it has, china or global when you get it?
Click to expand...
Click to collapse
I dont really know. AT least all google services were available. does this mean it has been the global base? I bought this phone in Indonesia were it is not available officially, only through some black market sellers in the malls. Maybe they also have used the chinese versions, unlocked and reflashed the global versions and then they sell it. So maybe it has been the chinese base originally but is sold out with the global version? On the devices backside is a sticker with IMEi, IMEI2, MEID and SN, does this say anything about the version?
bobo9900 said:
Can't you flash from stock recovery? Download recovery rom matching your stock recovery(china or global), save in microsd. Enter recovery and flash rom.
Click to expand...
Click to collapse
I think not, in Stock Recovery which is now installed on the phone I only have Reboot, Wipe Data and Connect MIAssistant
How about this?
https://forum.xda-developers.com/redmi-note-5-pro/how-to/tut-flashing-official-recovery-rom-t3798165
Same chipset as mi max3..
bobo9900 said:
How about this?
https://forum.xda-developers.com/redmi-note-5-pro/how-to/tut-flashing-official-recovery-rom-t3798165
Same chipset as mi max3..
Click to expand...
Click to collapse
thanks a lot for this tip, bro. I am not sure because in this guide they say it will help you to flash a recovery? I am having stock recovery already installed. I need to reflash the correct Rom. Anyway, I will try it asap. Atm it fails due to bad internet connection in my hotel right now.
I will download following ROM: Chinese Stable: MIUI 10 V10.2.1.0.OEDCNXM as a .zip archive and will try to load it into the Mi Assistant tool and try to start flashing from there. OK? Will let you know about the result then.
tobyffm said:
thanks a lot for this tip, bro. I am not sure because in this guide they say it will help you to flash a recovery? I am having stock recovery already installed. I need to reflash the correct Rom. Anyway, I will try it asap. Atm it fails due to bad internet connection in my hotel right now.
I will download following ROM: Chinese Stable: MIUI 10 V10.2.1.0.OEDCNXM as a .zip archive and will try to load it into the Mi Assistant tool and try to start flashing from there. OK? Will let you know about the result then.
Click to expand...
Click to collapse
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka china recovery.
Edit:from that thread,someone successfully flashed miui10. If you failed to do so, DO NOT try to flash miui9. Different ARB, will permanently brick device.
bobo9900 said:
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka china recovery.
Edit:from that thread,someone successfully flashed miui10. If you failed to do so, DO NOT try to flash miui9. Different ARB, will permanently brick device.
Click to expand...
Click to collapse
bobo9900 said:
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka cina recovery.
Click to expand...
Click to collapse
My recovery is at least in english language, does this help?
I just tried to flash the CN rom package mentioned in my last post with this MiAssistant Beta 3.0, but package verification failed:
Does this mean it is the wrong rom package and I simply need to download the other versions and test it with other ones and once erfification works fine I will know this must be the correct one? Or is this just another error i am know running into?
Any idea?
Many tanks!
PS: Many thanks for your update: I only tried to load miui_MIMAX3_V10.2.1.0.OEDCNXM_4f84ff82ea_8.1.zip into that Mi Assistant but verification failed, didnt do anything else so far.
tobyffm said:
My recovery is at least in english language, does this help?
I just tried to flash the CN rom package mentioned in my last post with this MiAssistant Beta 3.0, but package verification failed:
Does this mean it is the wrong rom package and I simply need to download the other versions and test it with other ones and once erfification works fine I will know this must be the correct one? Or is this just another error i am know running into?
Any idea?
Many tanks!
PS: Many thanks for your update: I only tried to load miui_MIMAX3_V10.2.1.0.OEDCNXM_4f84ff82ea_8.1.zip into that Mi Assistant but verification failed, didnt do anything else so far.
Click to expand...
Click to collapse
I guess verification failed means not matching. You can try global rom. Btw, have you try wipe data. Maybe rom already flashed properly but data bug causes bootloop. Try wipe then reboot.
bobo9900 said:
I guess verification failed means not matching. You can try global rom. Btw, have you try wipe data. Maybe rom already flashed properly but data bug causes bootloop. Try wipe then reboot.
Click to expand...
Click to collapse
Yes, I also used this wipe feature in this Mi Assistant but unfortunately it did not help. After rebooting again bootup screen appears a bit longer and I can hear a short beep sound which let me think it will boot up properly but unfortunately it then restarts into recovery mode only.
well installed is this one: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global, which I flashed earlier today via mi flash tool.
Now I tried to flash miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip which should be the same, but verification failed, too.
Does it make sense?!
In this thread, there are many Stock Roms available:
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Shall I download all MIUI 10 Stable (Global and China) and try?
tobyffm said:
Yes, I also used this wipe feature in this Mi Assistant but unfortunately it did not help. After rebooting again bootup screen appears a bit longer and I can hear a short beep sound which let me think it will boot up properly but unfortunately it then restarts into recovery mode only.
well installed is this one: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global, which I flashed earlier today via mi flash tool.
Now I tried to flash miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip which should be the same, but verification failed, too.
Does it make sense?!
In this thread, there are many Stock Roms available:
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Shall I download all MIUI 10 Stable (Global and China) and try?
Click to expand...
Click to collapse
Global and china rom have their own signature. But different version always have same signature. If verification failed, I thought signature didn't match.
Now you have tried both global and china and still failed. I'm confused. I don't have any idea anymore..
bobo9900 said:
Global and china rom have their own signature. But different version always have same signature. If verification failed, I thought signature didn't match.
Now you have tried both global and china and still failed. I'm confused. I don't have any idea anymore..
Click to expand...
Click to collapse
Thanks anyway bobo9900 for assisting me. And I should not try to flash a MIUI 9 rom, yeah?
Argh, I really don't understand it. I just got this phone yesterday, unlocked and installed twrp and magisk by using a how.to especially for Mi Max 3 and ran into this issue, FU**. Why does this happen to me, I only did these simple steps. Phone for trash after 1 day already?
Anybody else there who can help me?
tobyffm said:
Thanks anyway bobo9900 for assisting me.
Argh, I really don't understand it. I just got this phone yesterday, unlocked and installed twrp and magisk by using a how.to especially for Mi Max 3 and ran into this issue, FU**. Why does this happen to me, I only did these simple steps. Phone for trash after 1 day already?
Anybody else there who can help me?
Click to expand...
Click to collapse
Confirm your version global or china, so other might able to help. Mine come locked with screen protector sticker in English without Chinese words. Box had 'global version' written in red sticker.
Semoga sukses bro..
bobo9900 said:
Confirm your version global or china, so other might able to help. Mine come locked with screen protector sticker in English without Chinese words. Box had 'global version' written in red sticker.
Semoga sukses bro..
Click to expand...
Click to collapse
well, now there is nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218. 0000.00_8.1_global installed on the phone.
Also the Mi Assistant tool recgnizes V10.2.1.0.OEDMIFK as currently installed. My box has pon backside some chinese signs, no teaser "Global version". I think it has been chinese but black market sellers flashed global roms already to fit the indonesian market.
But I just noticed that in this Mi Assistant tool I have the options "Flash" and "Quick FLash" (erase all data) and there they mention it will work with Miui 8 and 9. Seems this Assistant tool is not MIUI 10-ready?! And I couldnt find a newer version of this.
Maybe this is the reason why verification with MIUI 10 packages fails?
tobyffm said:
well, now there is nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218. 0000.00_8.1_global installed on the phone.
Also the Mi Assistant tool recgnizes V10.2.1.0.OEDMIFK as currently installed. My box has pon backside some chinese signs, no teaser "Global version". I think it has been chinese but black market sellers flashed global roms already to fit the indonesian market.
But I just noticed that in this Mi Assistant tool I have the options "Flash" and "Quick FLash" (erase all data) and there they mention it will work with Miui 8 and 9. Seems this Assistant tool is not MIUI 10-ready?! And I couldnt find a newer version of this.
Maybe this is the reason why verification with MIUI 10 packages fails?
Click to expand...
Click to collapse
Read the last page, someone manage to re flash 10.0.2.0.
If you wanna flash old version, check ARB level first.
bobo9900 said:
Read the last page, someone manage to re flash 10.0.2.0.
If you wanna flash old version, check ARB level first.
Click to expand...
Click to collapse
OK checked. Through fastboot check of ARB I get:
fastboot getvar anti
getvar:anti FAILED (remote: GetVar Variable Not found)
finished. total time: 0.016s
Wondering again why again an error lol
TRhrough opening flash_all.bat file I see:
CURRENT_ANTI_VER=4
fastboot %
which means I cant downgrade, ya?