Related
hi
i have imate jamin after i finis making a hard spl for it a soft reset done after it the screen flashed and the device off and now i cant restart it what i can do to fix it
plese i nedd help asap
hossamha said:
hi
i have imate jamin after i finis making a hard spl for it a soft reset done after it the screen flashed and the device off and now i cant restart it what i can do to fix it
plese i nedd help asap
Click to expand...
Click to collapse
try holding the camera button, the power button, and poking the reset hole? if this does anything...thats good. from there hopefully you can reflash the hard spl.
i've tried this but there is no response from my device i cant find any way to make my computer find it
i know that you mean the boot loader but my device seems like there is no power on it at all
only if i remove the battery the screen flashed and then nothing
i'm trying to find a way to fix this problem on many sites but i find nothing
so what??????????????????????????????????????
hossamha said:
i've tried this but there is no response from my device i cant find any way to make my computer find it
i know that you mean the boot loader but my device seems like there is no power on it at all
only if i remove the battery the screen flashed and then nothing
i'm trying to find a way to fix this problem on many sites but i find nothing
so what??????????????????????????????????????
Click to expand...
Click to collapse
well, im sorry to say that i do not know near enough about this kind of thing to help you out here - im mostly a beginner myself.
CAN ANYONE ELSE HELP HERE?
so quick question, you are aware that while in the bootloader, the pc does not have to really..RECOGNIZE it...right? as in...active sync will not know its there, and its not going to show up in my computer? but the RUU should recognize it. have you just...tried it?
Hi all experts,
I am a newbie on this. I am in Canada, since here we dont have i780, so I brought it on ebay and didn't realize its not really an unlock phone.(been cheated) although is sim free but GPS and many other 3rd party app don't work. so i was looking for solutions and found your thread here.
I followed the flashing guide and everything seems to be ok until the russians rom is flashed. The phone turned off itself and cannot turn on anymore. I have tried holding ENTER and FUNCTION button, solf reset hole, and Start + End buttons to turn it on but it doesn't response at all.
I have spent my hard earned $500 on this phone and i am so depressed now... Please kindly help me on fixing my "not just bricked, but dead phone" or i have to save up for months for a new one... sigh..
your response is highly appreciated
Jack
I feel your pain and I had the same issue as you before.
Phone won't turn on after flashing and the mirage reported the flash was 100% done.
I suspect this is due to the samsung modem driver was not installed properly. I had forgotten to do a reboot after the driver install or it might be due to something else.
The way I fixed it was to send to ther service center as it is still under warranty. They had to replace some chips to make it work again and I think that might be your last hope.
thanks for your advise. I did install the samsung modem driver and did reboot the PC before starting mirage updater..... but somehow turn that way.
I brought it from ebay, do you think it can still be warranty? anyways.. gotta try my luck.
thanks tho
I just contacted Canada's samsung service centre. They said They dont have this model here in Canada, so cannot fix my phone.
Please, anyone can give me a hand?
What about a hard reset? have you try it?
try to re load the rom.. i am using HH1 for phone and HH5 for the PDA... works good... with the russian ROM PU (if i am not wrong) i had to load few times as the process stopped at 80% or so... and u can load the ROM from this thread without loading the PU rom..
i have the same troubled too~~
I installed Nataly Rom on my phone and since that time, my phone start to hard reset more and more often (3 times today)
Now I don't think that this has anything to do with the rom, but more with my phone.
Now, If I turn on my phone, I just get my red vodafone screen and nothing else happens.
I tried a hard reset, even with a complete format, wich now puts my phone completly bank, but still it won't pass my red vodafone screen.
Does anyone have suggestions of how to boot it up again?
please help
FuzzFuzz said:
I installed Nataly Rom on my phone and since that time, my phone start to hard reset more and more often (3 times today)
Now I don't think that this has anything to do with the rom, but more with my phone.
Now, If I turn on my phone, I just get my red vodafone screen and nothing else happens.
I tried a hard reset, even with a complete format, wich now puts my phone completly bank, but still it won't pass my red vodafone screen.
Does anyone have suggestions of how to boot it up again?
please help
Click to expand...
Click to collapse
try putting your phone into the bootloader screen and reflash with another rom.
I have a friend that had this problem with his phone. In his case there was a problem with the pagepool, installing a different rom as cobbs stated was the solution for him as well.
FuzzFuzz said:
I installed Nataly Rom on my phone and since that time, my phone start to hard reset more and more often (3 times today)
Now I don't think that this has anything to do with the rom, but more with my phone.
Now, If I turn on my phone, I just get my red vodafone screen and nothing else happens.
I tried a hard reset, even with a complete format, wich now puts my phone completly bank, but still it won't pass my red vodafone screen.
Does anyone have suggestions of how to boot it up again?
please help
Click to expand...
Click to collapse
some of us have had this problem already - my advice- use tbe search function 'cmd task 29' is the answer
Hi Gort
Thanks for the wonderfull advise.
I already thought my phone was a gonner, but now I can work with it again.
For all the people who experience a phone that keeps hard resetting more often and eventually cant boot at all, here's what to do.
Procedure:
1. bring the device to bootloader.
2. Launch ActiveSync on PC
3. Go to connection settings
4. Uncheck the Allow USB Connection
5. Now, run mtty1_1_.42_538 on PC.
6. If you have run mtty1_1_.42_538, just press the button USB
7. Type CMD
8. Type task 29 and let the program do his work a bit.
9. after that, flash with the rom of your choice
here is the link to mtty1_1_.42_538
http://forum.xda-developers.com/showthread.php?t=490182&page=4
Thanks for all the help guys, most appreciated
and hopefully this thread will help others now as well
edit: Link updated, should work fine now
problem flashing
hi fuzfuz thanks for the great advice ....the link for mtty1_1_.42_538 does not work ...can you let me know where to down load
thanks in advance
brightman said:
hi fuzfuz thanks for the great advice ....the link for mtty1_1_.42_538 does not work ...can you let me know where to down load
thanks in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=3451487&postcount=41
Hi Guys,
I am aware of how to upgrade a ROM, how to Use HardSPL and how modifying in general works, although I think I may have really broken the phone now.
I had OliNex 1.40 installed since forever. I have used several Roms in the past including EnergyROM, Ahen's Roms and I have currently been using Makeveral's BSB6.5O Rom, and it was working great.
The last time I tried to use the unlock, i tried to flash it with the 'Subrata' unlock package (the one with Step 1,2 and 3' folders. It didnt work both times I tried so I gave up. It said it was unable to write to the phone. I reflashed with BSB Rom and all was well.
Today, I found a seperate unlocker. It was a simple .exe file that opened up what appeared to be the 'CustomRUU' application. The screen initially went black and then the program said that it lost connectivity. I did read that it used Cmonex HardSPL but I did it anyway (I take responsability for this error) and from then on, the phone will not boot. No matter what combination of Hard reset button combinations I use, nothing happens. No vibration, no light around the centre button that I can see, nothing.
So is there anything, anything at all that I can do? Or have i totally F**ked it?
I have also done alot of searching both on here, PPCgeaks, all the forums.
Let me know, cheers guys.
I had a similar problem: Screen was black, no reaction from the phone. But i was able to connect it to my computer, it was not really detected, even though
i was able to flash a new Rom with a Custom RUU. Perhaps you could try that?
Try to change the rom . Pull out the stylus , Press the reset button and hold the VOLUME DOWN and the right down button . After connect to pc
The phone is in an Off state - I recharged the battery in it overnight - no white glowing ring around the centre button. No combination of buttons work - nothing happens and the device is off still.
OK, regardless of what has happened, Ive sent the phone to Victoria (Australia) to be repaired or replaced under warranty.
I just hope that it is so scrambled that they cant figure out that the device has been toyed with - will keep everyone updated!
btw - does anyone understand what technicians with more advanced tools would be able to determine (if anything)? Do they use special hardware to view the contents of the ROM or how does it all work?
thanks friends
Well..not exactly, but they have probably tools to examine the flash/memory/parts of the phone. interesting question
Update!
I sent the phone away to the Three mobile repair centre - the phone is back, fully repaired and Running BsB again.... just awesome.
it seem they replaced all the components of the phone except for the shell itself, I dont really know why they didnt just replace the phone? lol
EDIT: I forgot to mention that I told them the phone wouldn't boot after an overnight charge - thanks 3!
Sorry for bumping.
I have the same problem! I used the same program; 'DiamonCustomRUU.exe'
The screen became black. I can't open the bootmenu, soft- and hardreset doesn't work
It's a Dutch branded Vodafone TD.
I have to send it to Vodafone for repairing?
hello
i tried to flash bada 2.0 it diddnt work ( sercurity fail ) and other problems now i got a problem my phone doesnt boot up at all i cant even join download mode its just kinda dead.
I need help guys i tried to put out the battey left it there for 1 h put it back in and it still doesnt work i dont know what to do please can someone help? i screwd up
and sorry for my bad english its just the **** i learn from shool , youtube and funnyjunk
Hehe, biggest letters: IF U DONT KNOW HOW TO FLA**** DONT TAKE THIS.
Yeah, you made a little mistake, i dont know for sure that now, but try to re-flash to 1.2 some bada version not to 2.0.1, but first know how to turn off security, becouse it can be not to late, or you get Brick or Semi-brick Good luck dude
Are you sure you can't go to download mode ?????
If yes then i announce it : time of brick 23/7/2011
you will need JTAG or RIFF box to reanimate it
**** i cant go to download mode i guess im ****ed
http://forum.xda-developers.com/showpost.php?p=15935274&postcount=102
Try other Key combo... maybe you have luck.
Best Regards
Hello, lest you accidentally tried to flash BADA 2.0 with an older version of "Multiloader" if so remove the battery of the phone put it again and start the "Download mod" with keys "Vol up" + "Lock key" + "Power on" If you start flashing again with "Multiloader 6.65"
thanks but it doesnt work any other tipps? oh and i user 5.65
JUSTMAZLUM said:
thanks but it doesnt work any other tipps? oh and i user 5.65
Click to expand...
Click to collapse
If you cannot enter to download mode then you are in big trouble... You will need JTAG to reanimate it.
**** is there nothing else i could try?
If you turn it off and put the charger in nothing happends?
If so. JTAG is only way
If not you COULD have a semi-brick but i think you still need JTAG
what if my phone can boot but it reboot everytime after juz 1 sec on the home screen. this rebooting keep continue until i took off the battery. any solution?
blazk said:
what if my phone can boot but it reboot everytime after juz 1 sec on the home screen. this rebooting keep continue until i took off the battery. any solution?
Click to expand...
Click to collapse
Trying before asking? If you've read this thread then you would know that you should try to reflash
If your phone boots as soon as you put in battery then hold
vol down + camera when you put the battery in
thanks for the help its a full brick i put out the battery and tried to recharge nothing happend.