Related
Version 2 spike speedy rom for galaxy released
Powered by voodoo lagfix Ver-5-pre6
Replace tw launcher with modified and faster tw launcher
No need to install base rom first.
Fully deoxed and zipaligned.
Rooted and Busybox
Recovery 2e
Removed :
Live wallpapers
All Samsung Widgets
Aldiko ebook
Allshare
Daily Briefing
Email
Layer
Latitude
Maps
Memo
Mini diary
Navigation
Places
Press reader
Talk
Tinkfree office
Voice dialler
Voice recorder
Voice search
Write and go
Added :
Voodoo Lagfix version-5-pre6
Modified touchwiz Launcher
Android Stock Lockscreen
Black wallpaper & nice status bar icon (nexus icon)
Be watchful:
This install will WIPE all user data.
Download :
XWJP6 Spike Speedy Edition v2.1
Mediafire
JPJPA Spike Speedy Edition v2.0
Mediafire
How to install:
You can find it in post 2
Pics :
For install default programs you can download programs below and rename zip file to update and copy it to internal memory and install it from recovery(2e)
Touchwiz
Live wallpapers
Islamic Programs
Aldiko ebook
Allshare
Email
Layer
Memo
Mini diary
Tinkfree office
BuddiesNow
Days
Flash Player from JP6
Voice recorder
Writeandgo
special thanks to :
Supercurio
DocRambone
Tayutama
kalpik
Install guide :
1. Disable any lagfix if have it installed
2. Make sure have the 2e recovery. If your rom is froyo and you don't have 2e recovery, use cf-root by chainfire
3. Make sure you have a backup of your /efs (not mandatory, but highly recommended).
4. Factory reset is NOT required, but is recommended. Wipe cache and dalvik cache if you’re not performing a factory reset.
Installation Steps:
1. Download the ROM and put Spike Speedy Edition v2.0.zip on your internal memory
2. Download clockworkmod recovery from here. You *need* Clockworkmod, this won’t work with stock recovery.
3. Rename the clockworkmod recovery file to “update.zip” and put it on your internal sdcard.
4. If you had Voodoo installed prior to installing this ROM (eclair or froyo), make sure you still have the "disable lagfix" folder inside "/sdcard/Voodoo". If you’re coming from sztupy’s kernel, make sure you have disabled all Lagfixes from CWM.
5. Shutdown phone, wait for it to power down, then boot the phone into recovery mode (press volume up, keep it pressed, then press home button, keep it pressed, then press power button, keep it pressed until you see the Galaxy S screen. Release all three buttons when you see it).
6. Select “apply sdcard:update.zip” (use volume rocker to move up and down, and home button to select). Clockworkmod recovery will boot now (you may have to do apply update.zip twice for Clockworkmod to show up).
7. Once in Clockworkmod, select “install zip from sdcard” (use volume rocker to move up and down and the back button to select).
8. Select “choose zip from sdcard” and then select Spike Speedy Edition v2.0.zip. Then choose yes.
9. The update will start (will take some 5 minutes) and during the flashing you will see some strange big characters on the screen, don’t worry, that’s normal. After the process finishes, you will be dropped back into Clockworkmod recovery. From there, choose go back, and then reboot phone.
10. The first boot will take some time as the ROM will deodex
Special tnx to kalpik for install guide.
nice rom. Only problem is that i got problem with market.
i get "download unsuccessfull" all the time when i try to download apps. any help how to fix this ?
edit : after wiping cache / facory reset ilost whole market app...
Hey , really nice job with your rom . But i was wondering if you could make an update.zip with just the files needed to get the same theme?. I really like the theme lol.
Thx
Can you add polish locale to next release?
d.fx said:
Hey , really nice job with your rom . But i was wondering if you could make an update.zip with just the files needed to get the same theme?. I really like the theme lol.
Thx
Click to expand...
Click to collapse
i will do that
sardor said:
Can you add polish locale to next release?
Click to expand...
Click to collapse
ok , i will make update.zip for add many lang soon
eikka85 said:
nice rom. Only problem is that i got problem with market.
i get "download unsuccessfull" all the time when i try to download apps. any help how to fix this ?
edit : after wiping cache / facory reset ilost whole market app...
Click to expand...
Click to collapse
I tested market again and it works fine
You must check your connection
thanks spike the rom is nice and responsive. really nice job, keep up the good work.
Mirror for JPJPA version
Rapidshare
could u give the link of"all samsung widgets" plz?
hi
language romanian... please
thank!!
thanks sir ,, realy realy its perfect rom and hope to continue to v3
i cocked JPM/JP6 spike speedy and i upload it soon
be ready ...
Thanks sir but can you tell me whats the diffrent between jpa and jp6 and jpm in performance?
XWJP6 version added . go first post for download
How do you flash with part1 & part2?? Flash part1 via CWM then part2 right after??
Edit : Figured it out. Flashing now, will report back...
xidium said:
How do you flash with part1 & part2?? Flash part1 via CWM then part2 right after??
Edit : Figured it out. Flashing now, will report back...
Click to expand...
Click to collapse
no
1- download two parts
2- extract with winrar to XWJP6 Spike Speedy Edition v2.1 folder
3- open XWJP6 Spike Speedy Edition v2.1 folder and copy XWJP6 Spike Speedy Edition v2.1.zip to internal memory ...
Whats languages in this rom and changelog?
hi
thank.. jp6..
I need maps (update.zip)
plzzzzz.i want "All Samsung Widgets" in my galaxy.
Its all about FE-170 CG K012 ( Fonepad 7 2014 )
This thread will be Updated frequently (Update: May 2016)
How to Root:
Lollipop : Link (Skip Modding UI) !
Kitkat : The same as the Lollipop but you don't need to flash the fastboot Just run the Temporary Recovery
How to Upgrade :
From JB to Kitkat :
OTA : (recommended)
1. Get a strong and fast WiFi connection
2.Go to Setting > about > software update
3.Check for updates
Manually >>> (For Experts)
Steps of Update:
1. Check SKU of your device** could be ( WW , CN , TR , TW)
2. Download device software ( V11.2.3.18.2 ) form here ( Its Just a zip File )
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW , TR -> TR
4. Wrong SKU may cause update failure, please update the same SKU version only.
5. Copy the zip file( you got it from step 2) in SD Card and reboot the Device
6. After a While a Notification pop's out showing an Update detected.
Briefing Here
From Kitkat to Lollipop :
OTA : (recommended)
1. Get a strong and fast WiFi connection
2.Go to Setting > about > software update
3.Check for updates
Manually >>> (For Experts)
Steps of Update:
1. Check SKU of your device** could be ( WW , CN , TR , TW)
2. Download device software (V 12.8.1.38 ) form here ( Its Just a zip File )
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW , TR -> TR
4. Wrong SKU may cause update failure, please update the same SKU version only.
5. Put the zip file( you got from step 2) in SD Card and reboot the Device
6. After a While a Notification pop's out showing an Update detected.
Briefing Here
How to Downgrade :
From Lollipop to JB :
DO IT AT YOUR OWN RISK ( Proceed with caution and do the same : Risk of losing IMEI )
I'm not responsible for anything goes wrong about your device
***Some Users reported its done successfully but some of them said they have lost their IMEI ***
*Activate Developer mode (Settings-> info-> information about software-> quickly press a finger a few times on the item build number ) (You will see a secret menu to: Settings-> developer mode> USB debugging).
**Enable the installation of unknown origin applications. (Settings-> security-> unknown sources).
1. Check SKU of your device** could be ( WW , CN , TR , TW)
2. Download the firmware of 4.3 (10.32.1.33.1) ( 4.4.2 isn't successful) from this link:
3.You end up with a file called: "UpdateLauncher_K012_XX_10_32_1_33_1.zip".
4. Extract it and you Get "UL-K012-XX-10.32.1.33.1-user.zip" file (or pull it out).
5. Rename the "UL-K012-XX-10.32.1.33.1-user.zip" to "K012_SDUPDATE.zip".
6. Copy the newly renamed file ( "K012_SDUPDATE.zip") on the root of SD card.
7. Turnoff the device
8. Go to droidboot (volume UP and POWER simultaneously).
9. Select "RECOVERY MODE" (moving to it by volume), and press the power button to confirm.
Wait for the installation of the firmware and you will be with 4.3.
Then proceed to the 4.4.2 via OTA MANUALLY .. and remember to turn off automatic downloading of firmware via WIFI .. (Settings-> INFO-> SYSTEM UPDATE -> the three dots in the upper right -> disable "Automatically download using Wi-Fi ")
How to Optimize Lollipop :
A lot of users complain about lollipop bugs
lollipop is bugless for daily usage ( in some rare cases it has bugs)
But how to Reduce lags and optimize the speed and battery life:
1. Root your device !
2. Remove these apps (Use 3C ToolBox) Backup them First
Remove List:
AsusLiveDemoService
AsusLiveDemoUI
stock*Games*
Clean Master
Google+
Drive
Google Search app
Google Music
Google Magazine
Google TV
Hangouts
Google Books
Google NewsStand
2*. Disable(freeze) these apps (Use 3C ToolBox)
Disable List:
WhatsNext
talkback
RemoteLink
PrintSpooler
Omlet
CloudPrint
Maps
3. Install busybox with (Busybox on Rail) Download
4. Install Modded MX Player for FE170 lollipop (Lag less with 1080p even !! HW+ ) remember to check HW+ ON ! (DO NOT UPDATE IT) Download
5. Install X86 Youtube app Download (DO NOT UPDATE IT)
6. Install X86 Facebook app Download (If it doesnt work it shows there is not enough dpi for the app)
7. Install X86 Chrome Download
8. Install X86 Instagram Download
9. Install X86 Google Keyboard Download
10. Install X86 Google Camera (really better Camera! Just compare it with stock) Download
Don't use adblocker for getting download link
Tell me about your problems in lollipop
Don't forget to push Thanks Button
very nice but i wouldn't recommend downgrading using stock recovery. use tethered cwm instead. I have posted a guide on how to downgrade with cwm somewhere
hello i have k012_2 named fonepad 7 - TR SKU (no voice call capabilitiy - just 3g internet)
I know fonepad 7 has generally k012 code.
I tried every thing to change my SKU to WW or CN for making gsm calls but i failed.
Do you have suggestion for enabling call function?
Thank you very much
mca1 said:
hello i have k012_2 named fonepad 7 - TR SKU (no voice call capabilitiy - just 3g internet)
I know fonepad 7 has generally k012 code.
I tried every thing to change my SKU to WW or CN for making gsm calls but i failed.
Do you have suggestion for enabling call function?
Thank you very much
Click to expand...
Click to collapse
This is a hardware limitation and there is not such a solution
Does these Tweaks work for you ?
adblocker said:
This is a hardware limitation and there is not such a solution
Click to expand...
Click to collapse
But in Türkiye, there is a person that can make k012_2 phone call capability. Also he wants 30$ for this work. He doesnt share his secret. I dont want to give 30 box to him.
adblocker said:
Its all about FE-170 CG K012 ( Fonepad 7 2014 )
This thread will be Updated frequently (Update: March 2016)
How to Root:
Lollipop : Link (Skip Modding UI) !
Kitkat : The same as the Lollipop but you don't need to flash the fastboot Just run the Temporary Recovery
How to Upgrade :
From JB to Kitkat :
OTA : (recommended)
1. Get a strong and fast WiFi connection
2.Go to Setting > about > software update
3.Check for updates
Manually >>> (For Experts)
Steps of Update:
1. Check SKU of your device** could be ( WW , CN , TR , TW)
2. Download device software ( V11.2.3.18.2 ) form here ( Its Just a zip File )
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW , TR -> TR
4. Wrong SKU may cause update failure, please update the same SKU version only.
5. Copy the zip file( you got it from step 2) in SD Card and reboot the Device
6. After a While a Notification pop's out showing an Update detected.
Briefing Here
From Kitkat to Lollipop :
OTA : (recommended)
1. Get a strong and fast WiFi connection
2.Go to Setting > about > software update
3.Check for updates
Manually >>> (For Experts)
Steps of Update:
1. Check SKU of your device** could be ( WW , CN , TR , TW)
2. Download device software (V 12.8.1.38 ) form here ( Its Just a zip File )
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW , TR -> TR
4. Wrong SKU may cause update failure, please update the same SKU version only.
5. Put the zip file( you got from step 2) in SD Card and reboot the Device
6. After a While a Notification pop's out showing an Update detected.
Briefing Here
How to Downgrade :
From Lollipop to JB :
DO IT AT YOUR OWN RISK ( Proceed with caution and do the same : Risk of losing IMEI )
I'm not responsible for anything goes wrong about your device
***Some Users reported its done successfully but some of them said they have lost their IMEI ***
*Activate Developer mode (Settings-> info-> information about software-> quickly press a finger a few times on the item build number ) (You will see a secret menu to: Settings-> developer mode> USB debugging).
**Enable the installation of unknown origin applications. (Settings-> security-> unknown sources).
1. Check SKU of your device** could be ( WW , CN , TR , TW)
2. Download the firmware of 4.3 (10.32.1.33.1) ( 4.4.2 isn't successful) from this link:
3.You end up with a file called: "UpdateLauncher_K012_XX_10_32_1_33_1.zip".
4. Extract it and you Get "UL-K012-XX-10.32.1.33.1-user.zip" file (or pull it out).
5. Rename the "UL-K012-XX-10.32.1.33.1-user.zip" to "K012_SDUPDATE.zip".
6. Copy the newly renamed file ( "K012_SDUPDATE.zip") on the root of SD card.
7. Turnoff the device
8. Go to droidboot (volume UP and POWER simultaneously).
9. Select "RECOVERY MODE" (moving to it by volume), and press the power button to confirm.
Wait for the installation of the firmware and you will be with 4.3.
Then proceed to the 4.4.2 via OTA MANUALLY .. and remember to turn off automatic downloading of firmware via WIFI .. (Settings-> INFO-> SYSTEM UPDATE -> the three dots in the upper right -> disable "Automatically download using Wi-Fi ")
How to Optimize Lollipop :
A lot of users complain about lollipop bugs
lollipop is bugless for daily usage ( in some rare cases it has bugs)
But how to Reduce lags and optimize the speed and battery life:
1. Root your device !
2. Remove these apps (Use 3C ToolBox) Backup them First
Remove List:
AsusLiveDemoService
AsusLiveDemoUI
stock*Games*
Clean Master
Google+
Drive
Google Search app
Google Music
Google Magazine
Google TV
Hangouts
Google Books
Google NewsStand
2*. Disable(freeze) these apps (Use 3C ToolBox)
Disable List:
WhatsNext
talkback
RemoteLink
PrintSpooler
Omlet
CloudPrint
Maps
3. Install busybox with (Busybox on Rail) Download
4. Install Modded MX Player for FE170 lollipop (Lag less with 1080p even !! HW+ ) remember to check HW+ ON ! (DO NOT UPDATE IT) Download
5. Install X86 Youtube app Download (DO NOT UPDATE IT)
6. Install X86 Facebook app Download
7. Install X86 Chrome Download Remember to Disable WebRTC in chrome://flags
8. Install X86 Instagram Download
9. Install X86 Google Keyboard Download
10. Install X86 Google Camera (really better Camera! Just compare it with stock) Download
Tell me about your problems in lollipop
Don't forget to push Thanks Button
Click to expand...
Click to collapse
Very helpfull post. I was very much helped from your post. i use the items described in "how to optimize LOLLIPOP". For me it was very good someone to let me know wich app to be safely removed and wich can be freezed so the phone can work faster but without problems, so thank you for that list.
Second, 3C Toobox that you suggest is very powerfull as i saw and does alot of thinks others dont.
The App you are suggesting( Google,camera, FB, MX player) i have to report this
YOUTUBE, MX, GOOGLE CAMERA very easy downloaded and istalled and as you say they are very nice too.
Chrome and FB, allthough downloaded, was not able to install. Chrome cause the phone to reboot and nothing was installed. FB run the process succefully no in the end it says' app was not installed"
for Google keybord and Instagram downloading link is not working.
But all the other thing work out and i think my phone is in better contition now. For all your knowledges and efford to share it with us i would like to thenk you very much
logosA said:
Very helpfull post. I was very much helped from your post. i use the items described in "how to optimize LOLLIPOP". For me it was very good someone to let me know wich app to be safely removed and wich can be freezed so the phone can work faster but without problems, so thank you for that list.
Second, 3C Toobox that you suggest is very powerfull as i saw and does alot of thinks others dont.
The App you are suggesting( Google,camera, FB, MX player) i have to report this
YOUTUBE, MX, GOOGLE CAMERA very easy downloaded and istalled and as you say they are very nice too.
Chrome and FB, allthough downloaded, was not able to install. Chrome cause the phone to reboot and nothing was installed. FB run the process succefully no in the end it says' app was not installed"
for Google keybord and Instagram downloading link is not working.
But all the other thing work out and i think my phone is in better contition now. For all your knowledges and efford to share it with us i would like to thenk you very much
Click to expand...
Click to collapse
Apps updated
All the links workin properly !
Don't use Adblocker on these sites
Remove chrome updates and do "clear data " and try links (if it does work remove entire chrome by 3C tool and install new version normally (not recommended !!! you may lose connection checking ability ) )
For FB I think there s no enough DPI but you can try.
For Google keyboard and Instagram try new links
adblocker said:
Apps updated
All the links workin properly !
Don't use Adblocker on these sites
Remove chrome updates and do "clear data " and try links (if it does work remove entire chrome by 3C tool and install new version normally (not recommended !!! you may lose connection checking ability ) )
For FB I think there s no enough DPI but you can try.
For Google keyboard and Instagram try new links
Click to expand...
Click to collapse
You may be right about adblocker, i am always blocking ads and maybe this is the reason for keyboard and istagram not opening link. Any way, thanks again for response
---------- Post added at 08:02 PM ---------- Previous post was at 07:40 PM ----------
adblocker said:
Apps updated
All the links workin properly !
Don't use Adblocker on these sites
Remove chrome updates and do "clear data " and try links (if it does work remove entire chrome by 3C tool and install new version normally (not recommended !!! you may lose connection checking ability ) )
For FB I think there s no enough DPI but you can try.
For Google keyboard and Instagram try new links
Click to expand...
Click to collapse
yes i just check out and all links are working as mention above.
With adblocker disabled, there is no problem in the links. FB is actually DPI problem
Finally it's here! I'm waiting for this for one year. I will give you my feedback in the next week.
logosA said:
You may be right about adblocker, i am always blocking ads and maybe this is the reason for keyboard and istagram not opening link. Any way, thanks again for response
---------- Post added at 08:02 PM ---------- Previous post was at 07:40 PM ----------
yes i just check out and all links are working as mention above.
With adblocker disabled, there is no problem in the links. FB is actually DPI problem
Click to expand...
Click to collapse
Try This version of FB ! It has to work ... Download
adblocker said:
Try This version of FB ! It has to work ... Download
Click to expand...
Click to collapse
downloaded it, installed it, but its not starting. after 3 minutes 'facebook is not responting'. I'll try reseting phone to factory, because i have several other issues and then try again. Any way thanks for your effords.
I' ll report here results
logosA said:
downloaded it, installed it, but its not starting. after 3 minutes 'facebook is not responting'. I'll try reseting phone to factory, because i have several other issues and then try again. Any way thanks for your effords.
I' ll report here results
Click to expand...
Click to collapse
Hey
tell me about bugs that u've discovered
adblocker said:
Hey
tell me about bugs that u've discovered
Click to expand...
Click to collapse
i 've been busy(tax season in my work) so i was not able to respond so far, but i wiil do so in next two days, i promise....
my comments about suggestions you made
As i have posted before, you have done a very good work, collecting all these tips and trick that really make our phone to work more smooth and fast. I followed all your suggestion and these are my observetions.
When i unistalled and freese all the apps and services you are suggesting, I noticed that the tablet is working 15-20% faster than before, so this is the first + for your project!
downloaded and tried to install all that you suggest. All are working very well except:
FB is not installing at all no matter what you do.( uninstall, clear data, reinstall it, etc)
Chrome i was not able to install x86, so i downloaded from Play and install new version. I am not fun of Chrome and for once again a realized how heavy load is this browser, i cant see why people are using it. XDA start page did 3 minutes to load, since Mozilla 10 seconds. Any way this is personal opinion .......
Instagramm cause me black screen on phone in the end of installation. I had to hold down power so the phone closes and restarting it. When came back Instagram is working very well !!!!
So the main problems are FB and Chrome for me.
I am using an APP I found here in XDA that compines FB - messenger -Twitter in on screen without heavy load phone you can give it a try if you want. The name is Slidechat and you can take it from Play for free
[APP][4.0+][v2.0]Slidechat http://forum.xda-developers.com/android/apps-games/app-slidechat-t3382662
I hope i helped someone with these thought of mine.
The big value though are to ADBLOCKER effords who collected and tested all these things for us to find ready.
THANKS MATE @adblocker !!!!
thanks a lot for the guide, I'm trying to follow your instructions to root the device, but in the first step
(fastboot flash fastboot fastboot.img) the only thing I get is a message
<waiting for device>
and nothing happens
when I start the device normally and connect it to PC it is detected fine and nothing is wrong.
any ideas?
neno007 said:
thanks a lot for the guide, I'm trying to follow your instructions to root the device, but in the first step
(fastboot flash fastboot fastboot.img) the only thing I get is a message
<waiting for device>
and nothing happens
when I start the device normally and connect it to PC it is detected fine and nothing is wrong.
any ideas?
Click to expand...
Click to collapse
TRY this method to see if it helps
http://forum.xda-developers.com/showpost.php?p=61452330&postcount=360
After I rooted my device,
my device shutdown, I've tried to flash my phone but it tells me that:
GPT command failed
Then I tried SDK
RECOVERY FAILED
E: mount cache failed
plz help me
logosA said:
TRY this method to see if it helps
http://forum.xda-developers.com/showpost.php?p=61452330&postcount=360
Click to expand...
Click to collapse
Thanx a lot, this worked and I could root the device.
many thanks
Cruise007 said:
my device shutdown, I've tried to flash my phone but it tells me that:
GPT command failed
Then I tried SDK
RECOVERY FAILED
E: mount cache failed
plz help me
Click to expand...
Click to collapse
read this http://forum.gsmhosting.com/vbb/f977/asus-zenfone5-need-fimwere-2017447/
abd this http://forum.xda-developers.com/show...&postcount=360
Here it is. Full T-mobile With root, wifi calling, bluetooth and volte all working - since this is t-mobile based all bands should work as well
Updated to use API4 System Image and API4 Modem - MyMods has also been updated for the API4 System - Whatever you do DO NOT FLASH the API4 BL file. you will be Stuck on the new firmware without root if you do this as you cannot go back
To Avoid Repeat Questons. READ! READ IT AGAIN! and then READ it once more! if you do not Understand any part of this. Do Not Continue!!!
This Guide assumes you have some basic knowledge and is for advanced users!!!!!!!!
This Guide also Assumes you have an sdcard inserted in your phone(however some of you may not and this will not work.)
i will post an update to this guide when we have a method working for those of you with no extsdcard
Read this entire post before doing anything to avoid issues and FOLLOW Directions - if you don't things will not work right.
Note! if at anytime during the following steps you see the samsung boot animation before step 11. start over cause you screwed up!
Step 1. download the following files
https://www.androidfilehost.com/?fid=24651430732237653 bbx.rar
https://www.androidfilehost.com/?fid=457084094631641263 API4 system.rar
https://www.androidfilehost.com/?fid=24686680535467223 T-mobile APGC Bootloader
https://www.androidfilehost.com/?fid=529152257862665245 T-mobile API4 Modem
Step 2. extract system.rar and bbx.rar and then copy system.img and bbx to your extsdcard(the sdcard you inserted into your phone)
Step 3. odin sprint userdebug firmware available here. http://forum.xda-developers.com/sprint-note-7/how-to/root-super-leaky-bros-sprint-galaxy-t3447202
Step 4. Directly after odin is done with the sprint file you will immidiatly be presented with an update screen
Step 4a when this process of erasing your phone is finished it will reboot(this is the point you want to do the next step)
Step 4b. press and hold power, home and vol up to enter recovery
Step 4c If you see the samsung boot animation. you did NOT do this right and i would suggest you start over
Step 5. open a command prompt in your adb folder and do the following steps 1 at a time(these are case sensative)
Step 5a. adb shell
Step 5b. su
Step 5c. setenforce 0
Step 5d. export PATH=$PATH:/sbin
Step 5e. mount -o remount,rw /
Step 5f. on your phone, go to apply update from sdcard(this will mount your extsdcard as /sdcard and you should see the system.img file and the bbx file) do not select anything, go back to adb and continue(it is not a big deal if those files don't show. we just needed the extsdcard mounted as sdcard - the files exist, just continue to the next step)
Step 5g. cp /sdcard/bbx /sbin/bbx
Step 5h. chmod 777 /sbin/bbx
Step 5i. cd /sbin
Step 5j. ./bbx --install /sbin
Step 5k. umount -l /system
Step 5l. /sbin/dd if=/sdcard/system.img of=/dev/block/platform/soc/624000.ufshc/by-name/system
Note. you will see a blinking cursor. just be patient
Step 7. when it is done you will see something similar to this
11161600+0 records in
11161600+0 records out
5714739200 bytes (5.3GB) copied, 268.668086 seconds, 20.3MB/s
Step 8. if all went well you should be at your prompt and not in adb anymore
Step 9. from your command prompt simply type
Step 9a. adb reboot bootloader
Note! - if you still have odin open and the sprint file in the ap box make sure you uncheck it so it doesn't reodin the sprint firmware
Step 10. open odin and click the bl button and select this file - BL_N930TUVU1APGC_CL8706614_QB10376889_REV00_user_low_ship_MULTI_CERT.tar.md5
Step 10b. now click the cp button and select this file - CP_N930TUVU2API4_CL9115549_QB10937257_REV00_user_low_ship_MULTI_CERT.tar.md5
Step 10c. now click start. it will reboot when done let it fully boot this time.
Step 11. once booted and you have setup your phone, we need to add the root files or supersu as most of you know it
Note! pertaining to Step 12. these instructions were taken Explicitly from @freeza thread which is listed in step 3
Step 12. Now we need to add supersu and the needed files for it to work
Step 12a. download this file - https://www.androidfilehost.com/?fid=24651430732236679
Step 12b. Extract the sun7 file to your adb folder making sure the files are in a folder called sun7(mine looks like this - c:/adb/sun7 and contains 4 files)
Step 12c. Open a command prompt where your ADB executable and sun7 folder are.
Step 12d. adb shell
Step 12e. su - Note! if your adb prompot changes from a $ to #(you are good and have root access)
Step 12f. type exit twice to get back to the command prompt. - Your Phone should be fully booted when you do this
Step 12g. adb push sun7 /data/local/tmp/su
Step 12h. adb shell chmod 0777 /data/local/tmp/su/*
Step 12i. adb shell
Step 12j. cd data/local/tmp/su
Step 12k. su
Step 12l. ./root.sh - Note. this command begins with a . do not leave it out
Step 12m. Your Phone will now reboot
Step 13. when booted back up go to playstore and install busybox on rails or a similar app and install busybox to /system/xbin(if your given an option of where to install it)
Step 14. Thats Pretty Much it. install any additions i have included if you like. most of all enjoy it
Additional Notes!
If for any reason you do a factory reset. you will break root and need to redo this method to get it back
If you use shealth do not update it or allow playstore or galaxy appstore to auto update it or it will break it
If you plan on running the debloat/deknox file you will need to disable auto updates in google playstore as soon as you finish the setup wizard or you will be uninstalling the apps that managed to update
Note! Keep in mind that i remove alot of things(ie. allshare, knox, gear manager, game manager, tmo apps, google apps, facebook and alot of other things) if you need any of what i remove, you can simply open the zip and go to META-INF/com/google/android and open the following file "updater-script" in notepad++(do not open it with windows notepad as it will screw up the formatting on the entrys) you will see a whole bunch of lines that begin with delete_recursive, remove the lines with names of the apps you do not want removed. most of this stuff is self explanatory by it's name as to what it is and should be very easy to figure out. when done editing the file, save it. and flash the updated zip in flashfire. it's as simple as that.
Additional Files for those that want them(these are all flashed via flashfire)
https://www.androidfilehost.com/?fid=385035244224381428 my modifications zip API4 Version(very minor mods to statusbar and a few other added features)
https://www.androidfilehost.com/?fid=24686680535467932 debloat/deknox zip - Updated with remaining t-mo apps i missed initially
https://www.androidfilehost.com/?fid=24651430732237106 beats audio installer(this is a blue themed version done by me)
https://www.androidfilehost.com/?fid=24651430732237109 Dolby Atmos Installer
https://www.androidfilehost.com/?fid=24651430732237107 Viper4Android Installer
https://www.androidfilehost.com/?fid=24651430732237108 selinuxmodechanger.apk so you can set kernel to permissive for viper(this is an apk. just install it from your sdcard)
My Mods Contains the Following Modifications
3minit battery
battery bar - option is in rom control
potato clock
loud volume warning - toggle to disable or enable this via rom control
network speed on statusbar - option in rom control
aokp rambar in recents
added some additional toggles
ability to move the wifi and signal bar indicator to the left or right side via a toggle in rom control
a few csc tweaks
Applock Added - Thanks @TEKHD
FOLLOW Directions - if you don't things will not work right.
thank you to the following:
@freeza - for posting the original userdebug file
@ted77usa - for testing
@bajasur - for the initial idea which ultimately led to this
@Surge1223 - for the busybox installer and the adb help and android commands that make this work
@galaxyuser88 - for testing this and pointing out some flaws
@Hashcode - for inspiration
and anyone i missed
this was a complete collaboration and is only available because of those mentioned so be sure to give them thanks
Big Thanks to @galaxyuser88 for testing the mods for me as i can't
for those that don't like PI4 update. heres the original PGC files
https://www.androidfilehost.com/?fid=24686680535467933 - PGC mods
https://www.androidfilehost.com/?fid=24651430732237809 - PGC system.img
https://www.androidfilehost.com/?fid=24686680535467224 - PGC CP File(modem)
method is the same, just use these files instead of the updated pi4 files
reserved 2
reserved 3
Ok here it is: Xposed still works with this new root method, Only one catch, you have to install this before you install any of @OvrDriVE Mods.
If you plan on using Xposed then do not install @OvrDriVE my modifications zip as this will crash your systemui.apk.
As with any custom rom's, root, add-on's, you assume all risks with modding your phone. You have been warned.
Make sure you read all of my directions below, before you start posting errors with the install. Worst case you just have to start over with @OvrDriVE s installation.
Here is the way you can install xposed on your phone after you have root. I in no way have made any files or apks, I am just posting ways you get this loaded on your phone.
Please Thank the devolopers and others that have made all these files and apks possible..
The way to install Xposed framework via FlashFire:
1. Download FlashFire, You can get it from the app store: https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en
2. Download the Xposed Installer Apk: Xposed installer Apk
3. Download the Xposed Framework zip.<<< this is the file that you will be flashing via FlashFire: Xposed Framework.zip
4. Once you have all the files downloaded onto you computer/phone: you are ready to start. If you have'nt all ready copied all the files to your phone storage, do so now. If you did then you can move on to the #5.
5. Open FlashFire on your phone. Once it is loaded and open, click on circle with + button on the bottom right of the screen.
Then Click on Flash ZIP or OTA button.
Now select the xposed framework zip that you downloaded from #3.
Next you click the check mark on the top right of
the screen( do not change any of boxes on the left of the screen.<<< You Have Been Warned!!!!! .
Next scroll to the bottom of the screen and click the left button (flash button w the lighting bolt)
Sit back and watch FlashFire do its magic..
6. After #5 completes, you can now install the xposed installer apk from #2. Once installed open and check framework in the app and you should have this : Xposed framework version 86.1 (custom build by wanam / 2016709 is active.
7. Now go to Download in the xposed installer and download: XTouchWiz 1.1.2 or Wanam Xposed 1.3.0 Made for Samsung Android 5 and 6 Roms by Wanam. You can also download Firefds kit 1.0.5.1 by firefds <<<<< this is just a modified version of XTouchWiz with more stuff added to it.. This works as well on samsung note 7 root method.
8. Once you downloaded it, installed it, then go into the Xposed installer app- modules- you select the the app in #7 by placing a checkmark in the box on the right to activiate the modules.
9. Reboot your phone to activate the module.
10. Enjoy your efforts and customizing your phone:
If you some reason you want to uninstall xposed : flash this:xposed-uninstaller-20160211.zip
Awesome.....finally[emoji106]
Video tutorial could be found in here http://forum.xda-developers.com/showthread.php?p=68831392..... make sure to download correct modified system.rar for your specific carrier.
https://youtu.be/Oi-tuA_EIxA
*TwisT3DroiD_N930T*
Thank you!!!!
Sent from my SM-N930T using Tapatalk
OvrDriVE said:
Ok all here it is. root, with wifi calling and volte along with a few modifications
1. Follow the guide here skipping the root method for now- http://forum.xda-developers.com/sprint-note-7/how-to/root-super-leaky-bros-sprint-galaxy-t3447202
2. go through setup. add your google account but do not setup samsung account(you'll do this later)
3. once at the homescreen, open google playstore and go to settings and set it to not auto update apps(you can change this back later)(this is to prevent apps from auto updateing as i will be removing most of them)
4. now do the supersu install as instructed in the sprint post
5. once booted back up, open playstore and install flashfire
6. once flashfire is installed flash this zip
7. https://www.androidfilehost.com/?fid=24651430732237438 - note7update.zip
8. once booted back up. open themes and add your samsung account info.
9. exit themes and open galaxy apps and update all available apps(they should install without errors)
10. you can skip this if you want - install supersu2.77 apk
11. https://www.androidfilehost.com/?fid=24686680535467222 - superuser 2.77
12. when done. open shealth. and go through it's setup. when done flash this file - if you don't setup shealth it will not work once we remove knox.
13. https://www.androidfilehost.com/?fid=24686680535467219 - knox remover
14. when booted back up. go to your apn settings and reset it to default and then select the t-mo apn
15. boot download mode
16. and odin t-mo cp file only - This will flash the t-mo Modem
17. https://www.androidfilehost.com/?fid=24686680535467224 - t-mo cp odin file
18. once booted up, enable airplane mode, then enable wifi and wifi calling should turn itself on.
19. everything should work fine
20. if by chance you get a wifi calling error 0082 just enable airplane mode then enable wifi and it will fix itself
heres a few Extra Files for those that may want them
here is a beats audio installer
https://www.androidfilehost.com/?fid=24651430732237106 - beats
here is dolby atmos installer
https://www.androidfilehost.com/?fid=24651430732237109 - dolby atmos
and here is viper4android installer
https://www.androidfilehost.com/?fid=24651430732237107 - viper4android
and here is selinuxmodechanger to set kernel to permissive
https://www.androidfilehost.com/?fid=24651430732237108 - selinux mode changer
all 3 audio mods fully work together. make sure you have permissive set or they won't work
enjoy
the mods included are battery bar, 3minit battery, potato clock, network speed statusbar mod, 5 way reboot, ability to toggle wifi/data on the left or right, and a few other mods. it debloats the rom as well.
FOLLOW Directions - if you don't things will not work right.
thank you to @jovy23 for the wifi calling files. and a great big thanks to all those who tested this. and a great big ty to @freeza for posting the original userdebug file
also ty to anyone i missed
i know this isn't a proper post and i will fix it later
View attachment 3865172View attachment 3865173
Click to expand...
Click to collapse
Wow nice job man!
FTW
Sent from my SM-N930T using XDA-Developers mobile app
Nice job man! :good:
Thanks!
Samsung Pay
Does this still make Samsung pay not work or any other NFC payment types?
freeza said:
Wow nice job man!
Click to expand...
Click to collapse
nah. thats all you guys man. you guys deserve the credit. i just did a few mods and wrote out the install instructions.
batsup606 said:
Does this still make Samsung pay not work or any other NFC payment types?
Click to expand...
Click to collapse
keep in mind that once you root no payment method will work. however as this does not trip the knox counter. you can odin stock t-mo firmware and samsung pay and android pay will work just fine. you can't have it both ways unfortunately. it's either or
!!!!!!!!
If you guys want Samsung pay....u need to stay stock and use disabler package pro to debloat and like @OvrDriVE said we can't have it all ....either or we gotta give up something. .... but with this breakthrough with root from @freeza.... now WiFi calling and volte work.... we are moving in good direction .... until we all get new note 7 replacement phone in couple week..... happy Labor days guys for people in US.
Sent from my SM-N920T using Tapatalk
OvrDriVE said:
keep in mind that once you root no payment method will work. however as this does not trip the knox counter. you can odin stock t-mo firmware and samsung pay and android pay will work just fine. you can't have it both ways unfortunately. it's either or
Click to expand...
Click to collapse
Ah okay thanks! and do you know if the Bluetooth issues still occur?
I am going to watxh this topic. I know alot of work is going on however i want to see how stable it is before i do anything. I can wait no problem. i know we have been hitting roadblocks and until we have an official root method I am perfectly fine without for now... To all the Devs great job now we wait and see if penetration testing and users can do this method of root. Thank you all for your time and hard work!
Ice.
Sent from my SM-N930T using XDA-Developers mobile app
OvrDriVE said:
keep in mind that once you root no payment method will work. however as this does not trip the knox counter. you can odin stock t-mo firmware and samsung pay and android pay will work just fine. you can't have it both ways unfortunately. it's either or
Click to expand...
Click to collapse
Great job on this and all the other developers who finally got android development this far for us!
Also has anyone tried chainfire's suhide app to see if samsung pay or android pay will work even while being rooted?
batsup606 said:
Ah okay thanks! and do you know if the Bluetooth issues still occur?
Click to expand...
Click to collapse
i do believe the issue still exist. i havn't tryed replacing the etc folder yet to see if it fixs it or not
you can connect but once disconnected you have to unpair the device and repair it for it to work.
Enforcing is set by default on CM 13 so I tried to find some fixes trying to make it work then I got lucky.
If you want the new version of ViPER4Android you can download it here.
Firstly I advice you to install ViPER first (Do not open it yet) then go to Developer Options and disable the root access after that you can reboot to recovery and flash this and here is the link where the flashable zip came from.
Screenshot Here
You can enable the root access after boot and install the audio drivers. If you want to place ViPER4Android on the system you can use Lucky Patcher. (Trust me it helps)
Thanks to zhuhang for the app and AntonPanos for the flashable zip and lastly mobiusm.
I AM NOT A DEVELOPER, I in no way claim to have made any of this myself, I'm just here to say how I manage to get as close to having Pixel software on my Galaxy S7 G930V as possible.
Basically I'll divide this into three main areas. ROM, Add-on Mods, and Apps.
Read All the way through before starting so as to not miss anything.
Also the add-on mods are installed at the same time as the ROM. That way you keep safety net and what not.
Lets start with the ROM, I am using Ufirm_QE2_Hybrid_Nougat_Rom_FlashFire_Install Status Official For VZW S7FLAT by CVertigo1 / jrkruse
jrkruse said:
Latest Ufirm QE2 Nougat Firmware For The S7 Flat Only
This well give you a Customizable NonRooted Rom that uses stock boot.img not the eng boot image so there is no lag and it will pass safetynet checks and samsung pay will work
Give this guy @umaro some thanks he worked on this until it became reality even when I gave up
These first 2 step must be done first unless you are on my previous version of this rom or my carrier specific rom that do not have root or if your unsure just do this first
This Will Wipe Your Phone
1. Unzip UFIRM_G930_Odin_Firmware.zip and flash all files in odin
2. Go through setup ignore invalid sim message and skip adding accounts
3. Go to Step 3 Below
Click to expand...
Click to collapse
To Flash Files in Odin simply launch Odin (Downloads later)
click on each button (Labeled BL, AP, etc.) and select their respective files that were extracted from the archive.
Each respective file's label has each corresponding label. (AP at the beginning of the file name, means put it in AP slot)
Then boot phone into download mode, press home, download, and volume down keys all simultaneously.
Connect it to computer and press the begin button in Odin.
jrkruse said:
If you are on one of my previous version of this rom or my carrier specific rom
1. Unzip UFIRM_G930_Odin_Firmware.zip
2. Use odin to flash BL and CP
3. Unzip ADB_Root_G930U_QE2Files.zip
4. Flash EngBoot image with odin
5. Root Phone. I'm not going to have half a page about rooting there is an entire rooting thread here. The Eng Boot.img can be found in the UFIRM_QD2_Modified_Nougat_Firmware Folder
Click to expand...
Click to collapse
Rooting is very simple for this phone once the Eng Kernel has been flashed.
Here is @jrkruse's Guide:
jrkruse said:
This Root Method For S7 Nougat
Nougat_S7_Root_2_82_All_Carriers_V2.zip Includes Fingerprint Fix [Latest Verison]
Nougat_S7_Root_2_81_All_Carriers_V2.zip Includes Fingerprint Fix
Nougat_S7_Root_2_79_All.zip For Ufirm Includes Fingerprint Fix
Download Nougat Eng Boot.img Flash in odin
S7_SU_2_79_Root_Unroot_WO_Tweaks_V3.zip Old method
S7_VOLTE_ICON_FIX_ALL_VARIANTS.zip
HotSpot_Fix_VZW_QA2.zip
HotSpot_Fix_VZW_QA4.zip
HotSpot_Fix_VZW_QC5.zip
HotSpot_Fix_VZW_QC9.zip
HotSpot_Fix_VZW_QF2.zip
Directions:
1. Shut off the phone and boot into download mode (volume down, home, and power). Use Odin And Flash Nougat_S7_Edge_EngBoot.tar.md5 In AP Slot
2. When the phone reboots, plug in phone to computer unlock developer options and enable USB debugging and Disable Verify Apps Over USB.
3. Unzip the Nougat_S7_Root_2_82_All_Carriers_V2.zip and run root.bat from your PC. If you Have Windows 10 from inside the Nougat_S7_Root_2_82_All_Carriers_V2 folder you may need press and hold shift and right click and click open command window here from the dialog box then in command prompt type name of the root bat you want to run and hit enter
4. This will install root when done phone will reboot
5. The process wipes dalvik cache so it will take a few minutes to reboot
6. If having problems getting Grant SuperSU dialog to come up you can delete the SuperSU app and root will be granted instantly to all root request
Give phone a few min to settle open developer options set animation scales .05 and others to .05
@JUSMEJOSE for Eng Boot.img
Original Thread
Click to expand...
Click to collapse
jrkruse said:
6. Unzip FlashFire_Flashable_G930UFirmware.zip
7. Copy AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 to your phone
8. Copy UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip to your phone
9. Open FlashFire and click Add Zip and choose UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip make sure to check mount system
10. Now in FlashFire click Add Firmware and choose AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 select all the partitions
11. Make sure Inject SuperSu is not selected
12. Click Add Wipe and choose Wipe Dalvik Cache and Cache and choose Format Cache Also select wipe SuperSU image. Make sure wipe is at end of flash sequence. The sequence should be AP file first then Zip second and Wipe cache last
13. Now Choose Flash
14. Phone will take Up to 20 minutes to boot
15. Reflashing Zip Will Require Flashing The AP File In FlashFire At The Same Time
16. Do not use Package Disabler Pro if you Choose NoNaMe mods in Aroma[/B]
MODS- (NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
Kernel source
RomControl Source
Click to expand...
Click to collapse
Options I selected in Aroma:
Verizon Stock
NoName System UI Mods
Open Source Ad Blocking
Pixel Boot Animation
Manual Debloat
Removed Every thing except Samsung TTS and Samsung Gallary / Camera (you can remove if you prefer to use google camera, DO NOT REMOVE if you plan on using zero camera.)
I don't use the google camera because on my S7 the video records the audio out of sync with the video, I haven't figured out how to fix it. but zero camera allows me to use Photos app instead of gallary so.... yea. (Requires a purchase of the root app for alt gallery)
That's about it for the ROM install.
**note these were installed in FlashFire with the ROM so as to pass safty net.
Now here are the add-on mods I used:
Open-GApps - to get pixel icons, and connectivity service
Android 8 Emojis
iYTB Vanced (Modded YouTube)
Google Lens
Zero Camera Mod
Copy those mods onto internal storage with the ROM install and add them into FlashFire during the ROM install. Place them after the ROM zip, but before the Format Cache / Wipe System less Super SU.
Files To Download ROM / Add-on Mods
ODIN:
Odin.zip
ADB Root Files:
ADB_Root_G930U_QE2Files.zip
ODIN Firmware:
UFIRM_G930_Odin_Firmware.zip
FlashFire Flashable AP:
FlashFire_Flashable_G930UFirmware.zip
ROM installer:
UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip
ADB Setup:
adb-setup-1.4.3.exe
Open GApps:
http://opengapps.org/
iYTB / Android O emojis / Google Lens (Mirrored into one download for simplicity sake alt donwloads listed later):
Flashables.zip
Zero Camera Mod:
Thread Here
Next is apps
Pixel 2 Wallpapers -
Buttons remapper - get material button layout
Nova - get a better pixel launcher
ForceDoze - bettery battery life
SystemUI Tuner
Pixel 2 Wallpapers:
https://forum.xda-developers.com/android/apps-games/port-live-earth-wallpapers-t3481640
All are on google play except for Pixel 2 Wallpapers at the moment of me typing this.
You will need to grant Force Doze and SystemUI Tuner ADB permissions using a command prompt on windows.
Comands:
SystemUI Tuner:
adb shell pm grant com.zacharee1.systemuituner android.permission.WRITE_SECURE_SETTINGS
adb shell pm grant com.zacharee1.systemuituner android.permission.DUMP
ForceDoze:
adb -d shell pm grant com.suyashsrijan.forcedoze android.permission.WRITE_SECURE_SETTINGS
adb -d shell pm grant com.suyashsrijan.forcedoze android.permission.DUMP
And thats it!
Original Authors / Threads
@jrkruse / @CVertigo1 (AWESOME ROM)
Thread
@Master_T / @ZaneZam (iYTB)
Thread
@ZeevoX (Google Lens)
Thread
@Winb33 (Android O Emojis)
Thread
@zeroprobe (Zero Camera Mod)
Thread
@Pranav Pandey (Pixel Wallpapers)
Thread
ANY OTHER Developer who I did not list
THANKS A TON DEVS!!!! :good: :laugh: :good:
Let me know if anybody has anything else they have done to get this close!
I appreciate you putting all the links and mods into the same place. I have never flashed using FlashFire before (on a G930V) and this was an excellent guide for me.
My only trip up was I didn't understand the language about Camera/Google Camera/Zero Camera Mod and I tried installing the zero mod while debloating the camera off. So I will have to go back and do that.
I skipped the "flashables" youtube, emoji, lens but may end up going back for those.
Thanks again.
Update: I found a cool way to have the new Google now page in the launcher.
Launcher App:
First is the actual app. Typicaly I would just say use Nova but on the pixel launcher the Google Now page looks different than on other third party apps. I wanted this look, so here is how I found a way to get that new Google Now pag to appear on other launchers.
Step one, if you installed Google lens mod, you should be able to get the pixel launcher from the play store, if not get it from XDA labs or APK mirror. Set Google. Set it as your default launcher. Next you will need any third party launcher and Tasker. I'm using Lawn chair Launcher. (On Google play). Use button mapper pro to map pressing the home button to launch third party app. Go into Tasker and make a task, so that whenever Google pixel launcher is launched, open third party launcher. As long as the pixel launcher is set as your default, the new Google now page will appear in apps like Nova and action launcher.
I'm *loving* this so far. Thanks to you and the devs that have worked on each stage of this.
I'm doing:
Verizon Stock
No UI Mods
No Ad Blocking
Pixel Animation
"PlayStore" Edition (not BS free, not manual)
Flashing GApps
Flashing Emoji
My only issue is like you described with the camera. It was working initially and then it updated and the update is causing problems. Also, the double home button launch doesn't work without a 3rd party app (and with screen off with no root).
So I can either figure out a way to always ignore camera app update and use a 3rd party app for launch (screen on only)
or
Will the S8 camera option include the gallery app and not be cleared by the "PlayStore" option?
MCrly7 said:
I'm *loving* this so far. Thanks to you and the devs that have worked on each stage of this.
I'm doing:
Verizon Stock
No UI Mods
No Ad Blocking
Pixel Animation
"PlayStore" Edition (not BS free, not manual)
Flashing GApps
Flashing Emoji
My only issue is like you described with the camera. It was working initially and then it updated and the update is causing problems. Also, the double home button launch doesn't work without a 3rd party app (and with screen off with no root).
So I can either figure out a way to always ignore camera app update and use a 3rd party app for launch (screen on only)
or
Will the S8 camera option include the gallery app and not be cleared by the "PlayStore" option?
Click to expand...
Click to collapse
I believe so, however I don't know, this would be a better question to ask in the ROM's Thread. the link is in the OP
It says you flashed open gapps, does it just re write over existing gapps with no problems