Hi,
is there an app, which is able to completely shutdown the head unit by software ? Powering off by ACC is working, but I would like to have a possibility to completely shutdown the head unit, when ACC is still on.
I have a KLD6 MTCB with Booroodooks latest rom on it, which is rooted. Reboot works fine with different reboot apps, but shutdown is not working. It just goes into standby mode.
Thanks in advance for your answers.
Related
Hai, please help me, i've got problems with my wildfire. my phone cannot switch on, cannot communicate with pc, cannot charging and everything won't worked anymore. i'm using wildpuzzlerom 2.2.1 v0.8. i remember the last time what i did to my phone is i'm downloading the radio and installed it. after the installing process was finished, i tried to reboot my phone but the phone stuck and not funtioning, so i try to pull out the battery and put in back. when i'm trying to switch on, my phone was already not functioning. i tried to connect to the pc but still won't worked and try to charge, still gave the same results. i sent my phone to repair shop and they told me that my phone components worked well and there's might be some problems with the operating system.
why is that? any solution? i would be grateful if you could HELP me.
can you boot on hboot menu?
I can't even on my phone and there is no connection through the USB as well.
I mean, i did try already by pressing the volume button+power button but it won't boot into hboot menu.
no answers and solution?? (
hi!
suddenly my n7100 does reboots again, and again.
on start with the n7100 logo - while charging, the bat icon, it reboots - i can not go even into download mode.
if i disconnect the bat power, and leave it for 1 or 2 days it is working again, a few seconds.
i flashed new rom, wiped cache, and new recovery. sadly: no success. still in a boot loop.
i have looked in the internet and of course in this forum - does anyone know what to do, to get it alive again (well it is, but it is rebooting(((?
is the board broke? or the switch ( it is working as far as i see) - or some ram?
any help would make me glad
tia,
rasp
I guess it's not working when charger is connected ? So I understand from your post.?
Also which bootloader are you on? And which rom you flashed?
If you using kitkat notice that the bootloader is better to be the one from the kitkat rom.
Or do you used rom with Ultra saving mode the first time you got those bootloops.
Sent from my GT-N7100
note2nooby said:
I guess it's not working when charger is connected ? So I understand from your post.?
Also which bootloader are you on? And which rom you flashed?
If you using kitkat notice that the bootloader is better to be the one from the kitkat rom.
Or do you used rom with Ultra saving mode the first time you got those bootloops.
Sent from my GT-N7100
Click to expand...
Click to collapse
yes. charger is also not working. rebooting....
i used for about one year (!) - including wanam rom... this BL:
BL_N7100XXUEMJ5_1903221_REV04_user_low_ship
and reflashed it yesterday again without any success. well the rom i did not reflash... only bootloader and recovery.
any tips to get this baby working again?
if i put a fully charged battery in it, it also reboots...
raspberryswirl said:
yes. charger is also not working. rebooting....
i used for about one year (!) - including wanam rom... this BL:
BL_N7100XXUEMJ5_1903221_REV04_user_low_ship
and reflashed it yesterday again without any success. well the rom i did not reflash... only bootloader and recovery.
any tips to get this baby working again?
if i put a fully charged battery in it, it also reboots...
Click to expand...
Click to collapse
So you're saying your phone reboots by itself as soon as you put the battery inside? Can you get into download mode without pressing the power button just press volume down + home button if download mode opens up that means your power button is messed up (either it's pressed all the time or you need a new power button)
So issues on random reboots after update are gone, no more reboots. However, whenever my device get into sleep mode, after a couple of minutes, lets say 1-2minutes, when I try to turn it on, it doesn't respond. I have to hold on to the power button for several seconds, then it will boot. It seems that an application freezes while the device is put to sleep. Any ideas? I'm coming from stock firmware.
By the way, I downgraded from BNG6 to BNE4,
Reboot into safe mode. Try to replicate the issue. If it doesn't happen then it's a poorly coded app. If it it still happens reflash rom.
@nephilim1
Hamza Murad said:
Reboot into safe mode. Try to replicate the issue. If it doesn't happen then it's a poorly coded app. If it it still happens reflash rom.
@nephilim1
Click to expand...
Click to collapse
okay, I will try it but for now, my tab seems to be okay on it sleep mode... but if this freezing occurs again, I will do your suggestion..
Hello everyone,
I have an 1-DIN RK3188 KLD MTCB unit. I was using a Malaysk firmware for some time now with no problems except some random reboots now and then. Yesterday, after changing a setting for reverse camera (mirror - off), the unit just died. It is not powering on unless I use reset + volume know combination. The screen does not come out, nothing. When short press the reset key, the buttons blink once. When using the reset + volume knob combination, the unit powers on to recovery and stays on no matter if acc on or off (before, when acc where off, the unit shuts down). Tried to reflash with original firmware with no success. Any ideea what could have happen and what can I do?
LE: I managed to make the screen come out (must press the open button right after power on). Tried installing factory firmware but when reaches reboot it is shutting down. Could it be the MCU?
Thank you!
UPDATE: After some tries to reinstall the firmware (both Malaysk ROM anf factory ROM), I also updated the MCU. Unfortunately, no change. Then, I started to look for the problem elsewhere. I discovered one faulty fuse, exactly the one responsible for ACC 12V at the unit. After I installed a new fuse, the unit successfully booted but now I can no more control the flip-up screen. I flashed the MTCB-KLD-V2.78 MCU. Is this MCU universal (both 1din and 2din) or do I need a specific one?
Hello, I tried to install a custom MCU with sound patch and now the unit hardly boots. I got it to boot but it shutted off and I wasn’t able to flash the original MCU. I’ve been trying to get into recovery by holding down the power button until the key backlight flashes three times still holding it for three seconds and then letting go and pressing again.I tried with ADB but still no success.It is a PX30 MTCE LM.
I am sorry I posted this in the wrong place.