Hi is there possible to install magisk on stock v30D.
I tried some combinations but have problem to make everything work...
Can someone post for me simple instruction.
1. Install 30D KDZ file with LF Flash Tool 2014 (with full wipe)
And now don't know which root method use and how to install twrp and magisk.
Normally I wouldnt have problem with root and twrp but magisk complicate everything.
Thanks for any advice!
Related
I have an unrooted gpad 8.3 how to get easiest to cm13 have searched the forum but i am unsure how and in wich order to do it.
I have the korean unrooted lollipop. A step by step that an non tech savvy person can follow would be great.
Follow these steps:
1. Root with oneclick root app Kingoroot
2.Install TWRP manager from Play store for download and install twrp
or
you can download it from here https://dl.twrp.me/v500/ and instal trough flashify app
3.then follow this to get TWRP working how to install KK bootloader + files
4. before booting to twrp, download ROM, Gapps whatever want or you would be forced to use adb/micro sdcard for installing it
When u installed TWRP + KK bootloader u wont be able to boot your V50030a ever again only if u do this : With same commands for installing KK bootloader u can install back the LP bootloader through TWRP terminal ..... to get stock rom working again
Thanks will try it during weekend
Took som time before i got time to try this but all went ok on cm13 now thanks for the help upu
I rooted my LG G Pad 8.3 (V500) and I installed the AOSP 6.0.1 (MOB30J). It works fine, but for some reasons (?), I lost the root. Does someone know how to re-root the G Pad 8.3, already on Marshmallow 6.0.1 ? The root guides for Android 4.4 do not work and I do not find a guide for the 6.0 version. Thanks for your help.
Hi, you flash SuperSU 2.52 in recovery to root your Device? If still not have SuperSu after boot, you install it from playstore. It's will OK.
hptnhan said:
Hi, you flash SuperSU 2.52 in recovery to root your Device? If still not have SuperSu after boot, you install it from playstore. It's will OK.
Click to expand...
Click to collapse
Hi. Many thanks for your answer. I have SuperSu, but it tells me that:
1- I have no binary installed
2- if I made an update to Android 5.0 (in my case, it's 6.0), I have to re-root my device manually.
As @hptnhan says, if you flash the latest SuperSU.zip from custom recovery then you should be set.
roirraW "edor" ehT said:
As @hptnhan says, if you flash the latest SuperSU.zip from custom recovery then you should be set.
Click to expand...
Click to collapse
OK. I understand. I'll do it. Thanks for your help.
I have the same problem. Lost root after AOSP 6.0.1
I tried to flash the latest supersu zip 2.76 and got secure booting error and stuck on LG logo. Please help.
Edaily7 said:
I have the same problem. Lost root after AOSP 6.0.1
I tried to flash the latest supersu zip 2.76 and got secure booting error and stuck on LG logo. Please help.
Click to expand...
Click to collapse
Restore to a 100% stock unrooted ROM using a KDZ or TOT made for your variant (V500). Flashing a TOT or flashing a KDZ with the CSE option will wipe everything including internal storage. If you flash the same version of the stock ROM that you were previously successfully running, you could try flashing a KDZ with the Normal option which won't wipe Data. If the tablet won't finish booting after that, try wiping Cache or a Factory Reset which will be the same as flashing the KDZ with the CSE option.
Thanks for your help. I was able to flash the stock rom. I installed ASOP 6.01 again and i lost root again. How do I gain root again on ASOP 6.01? Flashing the supersu.zip doesnt work for me. Is there another way to regain root on ASOP 6.01? Thank you.
I will ask the same question: How do i root my LG G Pad 8.3, running Android 6.0.1?
I've tried SuperSU 2.52, but got stuck on the secure boot error.
Bump bump...
Edaily7 said:
Thanks for your help. I was able to flash the stock rom. I installed ASOP 6.01 again and i lost root again. How do I gain root again on ASOP 6.01? Flashing the supersu.zip doesnt work for me. Is there another way to regain root on ASOP 6.01? Thank you.
Click to expand...
Click to collapse
AOSP or CM 13? I haven't fooled with CM for any device in over a year but last I checked it includes it's own SuperUser app that you could enable. It might've been in the Developer Options section of Settings. You could also optionally try flashing an old version of SuperSU that's not Marshmallow-aware such as v2.46 or 2.5x (I think 2.5x was still not Marshmallow aware). Don't blame me for bricks though.
When I had tried CM 12.1 (for a different device, I don't have what you have) you could opt for flashing SuperSU.zip instead of enabling the built-in SuperUser app. I don't know if that's still an option under CM 13.
Sounds like you fellas are running wrong base ^^ (original firmware that V500 came with?)
Could be wrong as I've been out of the game a while o_0
Try a new base and then root, recovery and custom ROM it.
Hello!
I'm making a zip which contains stock 2ba software untouched, extracted from the original kdz
Includes:
Stock untouched System
Stock Boot (compatible with Magisk)
Stock MM modem
Install instructions:
- Reboot to TWRP
- Wipe data, cache, system
- Install zip
- Reboot
- Enjoy!
Link:
https://drive.google.com/open?id=1GaPfb_WNUW_4-kd_jk_80OWosbjdCLAv
Link updated! Feel free to upload some mirrors if you want
P.D: Sorry for my bad english
Hello. Thank you very much for the file. Installed everything works. At first I could not understand why there was no root, but then installed Magisk and everything turned out.
I am on a completely stock OTA upgrade version of 2BA, I have NO root, my boot loader is still locked,<as I have still not got around to flashing the UsU method, There for I currently do NOT have a custom recovery installed; such as TWRP; which is listed as a requirement(?) in the first step of following process (to flash a rooted Rom.)
I am curious as to how I will be able to complete these steps, or am I missing something? Is this,supposed a way to gain root on 2BA if you are on a non root version like me, or is this suppose to be a update of your on a previous version which you already have rooted, or is this just a different way to root AFTER you have had the UsU boot loader unlocked?
robles4242 said:
I am on a completely stock OTA upgrade version of 2BA, I have NO root, my boot loader is still locked,<as I have still not got around to flashing the UsU method, There for I currently do NOT have a custom recovery installed; such as TWRP; which is listed as a requirement(?) in the first step of following process (to flash a rooted Rom.)
I am curious as to how I will be able to complete these steps, or am I missing something? Is this,supposed a way to gain root on 2BA if you are on a non root version like me, or is this suppose to be a update of your on a previous version which you already have rooted, or is this just a different way to root AFTER you have had the UsU bootloader unlocked?
Click to expand...
Click to collapse
the only way to root your phone on 2BA is with UsU.
so after you do UsU you can flash TWRP and from there you can flash magisk for root. you don't have to flash this rom for root
here's a side note. when you do the UsU unlock do not flash the baseband package. it gave me problems with my SIM not being detected
ANDROID2468 said:
the only way to root your phone on 2BA is with UsU.
so after you do UsU you can flash TWRP and from there you can flash magisk for root. you don't have to flash this rom for root
here's a side note. when you do the UsU unlock do not flash the baseband package. it gave me problems with my SIM not being detected
Click to expand...
Click to collapse
I tested downgrading from Lineage 15.1 and this ROM Works and TWRP works too! Thanks!
All i want is to go from stock korean lollipop and install custom roms like Resurrection Remix via twrp.
But very confuse in the process as the more i read the confused i become.
As far as i colected people info, they say this are the steps.
1. Go back to stock KK
2. ROOT + twrp
Method 1 root with towelroot and twrp with flashify
Method 2 ioroot25 via root. Bat
Method 3 via ADB with ioroot25
Will it not just be posible to flash straigh away twrp via twrp app or even though ABD comands. And later on with twrp installed, just flash RR and later on magisk.
Many thanks @KEgg1 i read that you went from stock korean to RR. Will love to hear your opinion
Anyone tried this method: https://topjohnwu.github.io/Magisk/samsung ?
I think our TWRP from this thread: https://forum.xda-developers.com/showthread.php?t=3916199 builded the same way.