Develop Bugs

How to root Oneplus 3 hosting the latest Oxygen OS 3.2.1

I have tried most of the tutorial presented online and unable to complete the process, i consider its due to the latest version so help on this would be appreciated
thanks in advance

I followed this guide ( For OOS 3.1.2 and OOS 3.2.1 )
https://youtu.be/kGZyX9e7-C4
Sent from my ONEPLUS3

I used this sticky in the OP3 Guides section to achieve root on OOS 3.2.1 (and unlocked bootloader): http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733

darack1234 said:
I have tried most of the tutorial presented online and unable to complete the process, i consider its due to the latest version so help on this would be appreciated
thanks in advance
Click to expand...
Click to collapse
Root method isn't changed from 3.2.0 to 3.2.1, what do you mean by unable to complete, please provide further detail as to what exactly you have managed and where it fails.

[GUIDE] How to install EMUI 9 / Android 9 Beta on EML

Hi,
you want to flash EMUI 9 Beta, are FRP and bootloader unlocked and rooted? Great, here we go.
Disclaimer: I am not responsible for your bricked devices. This has only been tested by a few people with Windows 10 and EML-L29 C432. Other models may or may not work. Please don't use that method if you don't know how to recover your phone from a bricked or semi-bricked state.
It might be a good idea to disable your antivirus if you run into warnings. There is no root.
Steps:
- Download THE TOOL™ v0.2
- Download the matching firmware bundle for your device. With EMUI 9 the firmware files for L09 and L29 differ.
- Extract THE TOOL™
- Extract the firmware bundle, you'll get two ZIPs and some XMLs.
- Start FLASH.bat inside of the extracted tool folder - it will guide you through the procedure.
- I did not have to factory reset. Maybe you will still need to.
- I have no idea if you will be able to receive OTAs or upgrade to future builds.
Disclaimer: Its not my fault or my responsibility if you brick your phone. I have almost no spare time at the moment, so I will probably not be able to help you. Also, there is no root.
Download:
EML-L09 C432 - Build 9.0.0.47
EML-L29 C432 - Build 9.0.0.45
Massive thanks to:
- @Atarii
- @Androlark
- @ante0
- @dkionline
- @frantorresm5434
- laststandingdroid
- @mankindtw for the original NoCheck recovery
- @Pretoriano80
- @shimp208 for the bundled minimal ADB + Fastboot
- and of course to all the brave testers!
There is no root. Also, please don't blame if your device dies. And I don't know if VoLTE works.
Click HERE for the P20 Pro (CLT) thread.

07.09.2017 - v0.2 - script now should work inside path containing spaces
06.09.2018 - v0.1 - initial release

Good job, funcionando perfeitamente aqui

Drekko said:
Good job, funcionando perfeitamente aqui
Click to expand...
Click to collapse
Which model version do you have, C432?

burgess_boy said:
Which model version do you have, C432?
Click to expand...
Click to collapse
yes c432

Will this work by sideloading the firmware with ADB (without root and unlocked bootloader)?

my phone is locked. So I don think this will work for me.

VoLTE works perfect!

No su message
The script always end with this no su error. I don't get the permantly grant root message.
I tried the script several times. But everytime the same error....

Any new info on possible root with this? Or do we have to wait till the full EMUI 9 release for that?

Muscar said:
Any new info on possible root with this? Or do we have to wait till the full EMUI 9 release for that?
Click to expand...
Click to collapse
one way only huawei service center and flash by test point or all time update from funkyhuawei.club I have sam case

I already unlocked my bootloader and currently rooted on EMUI 8.1, got everything I need to do it with Android Pie. I've been looking into other ROMs like Lineage and AOSP, but I haven't found any good info for the P20... Only for the P20 Pro and Lite, which really sucks, it feels like the normal P20 doesn't even exist, a lot of forums only have subs for the Pro and Lite, it's very annoying.
What is stopping me, or anyone that was lucky enough to root before Huawei stopped that, from rooting EMUI 9? I don't have a lot of experience with android and roms so I'm kinda fuzzy on details.

Morning,
All is alright but... it is not possible to root p20 (some people explained same like genius but i'm not genius)
Where is the best method to root huawei p20.
Thx in advance have a nice day

Yesterday successfully installed the latest beta.
I've uploaded the firmware (9.0.0.108)
https://mega.nz/#F!LCIBUAQR!789eoK8f-v-aBzOnB9CzxQ

curtricias said:
Yesterday successfully installed the latest beta.
I've uploaded the firmware (9.0.0.108)
https://mega.nz/#F!LCIBUAQR!789eoK8f-v-aBzOnB9CzxQ
Click to expand...
Click to collapse
Are the new gestures included in this version?

Mara-X said:
Are the new gestures included in this version?
Click to expand...
Click to collapse
No.

curtricias said:
No.
Click to expand...
Click to collapse
How's battery on beta? Better than android 8?

curtricias said:
Yesterday successfully installed the latest beta.
I've uploaded the firmware (9.0.0.108)
https://mega.nz/#F!LCIBUAQR!789eoK8f-v-aBzOnB9CzxQ
Click to expand...
Click to collapse
Which file to use between the two if im now on 8.1

curtricias said:
Yesterday successfully installed the latest beta.
I've uploaded the firmware (9.0.0.108)
https://mega.nz/#F!LCIBUAQR!789eoK8f-v-aBzOnB9CzxQ
Click to expand...
Click to collapse
Got it right. Used these files with instructions on OP

You must be on stock emui. And rooted. So first flash back your stich system.img en stock recovery. Then follow the tutorial in the OP.

just got my bootloader code. now what?

so I'm about to unlock my bootloader now that I got my code and I have no problems doing that but I'm just looking for suggestions on whether to flash a ROM or not. Anyone running the Resurrection remix are any of the other ROMs? And I seen that you can flash TWRP to recovery or erecovery partition? Which one should I do?just trying to get advice from someone who's already went through all this

juggamonkey said:
so I'm about to unlock my bootloader now that I got my code and I have no problems doing that but I'm just looking for suggestions on whether to flash a ROM or not. Anyone running the Resurrection remix are any of the other ROMs? And I seen that you can flash TWRP to recovery or erecovery partition? Which one should I do?just trying to get advice from someone who's already went through all this
Click to expand...
Click to collapse
I use RR. It's stable, but no Google pay. Omni Rom still have a number of issues I believe.

juggamonkey said:
so I'm about to unlock my bootloader now that I got my code and I have no problems doing that but I'm just looking for suggestions on whether to flash a ROM or not. Anyone running the Resurrection remix are any of the other ROMs? And I seen that you can flash TWRP to recovery or erecovery partition? Which one should I do?just trying to get advice from someone who's already went through all this
Click to expand...
Click to collapse
Abdul Oxford said:
I use RR. It's stable, but no Google pay. Omni Rom still have a number of issues I believe.
Click to expand...
Click to collapse
I have AL00 8g/256g model on 9.0 200 running RR 7.0.1. beta. TWRP is installed on erecovery and Magisk installed on recovery. Gpay does work if you follow steps in post #5 of this thread https://forum.xda-developers.com/apps/magisk/discussion-google-pay-magisk-discussion-t3906703 basically the newer versions of Google Play Services can detect root even if it's hidden with Magisk Hide, so you have to have an older version installed and prevent it from updating again. Then hiding that version with Magisk Hide makes Gpay work. Eventually Magisk will be updated to hide the newer versions.

install rom gl00balized from our forum, root and twrp. Everything works beautifully and seamlessly including recording conversations. How to write something.
Wysłane z mojego EVR-AL00 przy użyciu Tapatalka

facet_ said:
install rom gl00balized from our forum, root and twrp. Everything works beautifully and seamlessly including recording conversations. How to write something.
Wysłane z mojego EVR-AL00 przy użyciu Tapatalka
Click to expand...
Click to collapse
I can't find the gl00balized ROM for AL00 - have you a link please?
I want to do the same as you have done.
Thank you

joebongo said:
I can't find the gl00balized ROM for AL00 - have you a link please?
I want to do the same as you have done.
Thank you
Click to expand...
Click to collapse
https://forum.xda-developers.com/ma...-mate-20-x-global00ized-2-0-emui-9-1-t3920956

juggamonkey said:
so I'm about to unlock my bootloader now that I got my code and I have no problems doing that but I'm just looking for suggestions on whether to flash a ROM or not. Anyone running the Resurrection remix are any of the other ROMs? And I seen that you can flash TWRP to recovery or erecovery partition? Which one should I do?just trying to get advice from someone who's already went through all this
Click to expand...
Click to collapse
Where did you get the unlock code from?

Don't bother. Even after unlocking, there's not much you can do with it. There are no official versions of popular roms for it because of the shady way the unlocking codes are obtained. And many developers can't make good progress because there's no official way of unlocking it. And they don't need to suffer to bring out a good rom when unlocking the bootloader is so difficult.
Even after unlocking there are so many broken issues because of the above.
Not sure you can even unlock with the code you got. Anyway how much did you pay for and to whom?

I also would like to know where you unlocked it? I just want root.

I got my code from the Russian site a few months ago .I flashed Resurrection remix and immediately went back to stock ROM. Not worth unlocking bootloader imo

Is it major difference between rmx2061 vs rmx2063 software?

Hi all, anybody knows what is the difference between 2061 and 2063, is it worth updating to 2061 when it is 2063

Veseleil said:
Hi all, anybody knows what is the difference between 2061 and 2063, is it worth updating to 2061 when it is 2063
Click to expand...
Click to collapse
UPD. Found that 2063 is 2061EU, updated last, everything perfect

Need more informations about the two
I am in the same situation.
Got my RMX2063 device not long and i purchased the International Version.
Is there a way to check what is flashed at the moment on it? International or EU OS?
Curently it is saying RMX2063_A_35
Is the RMX2061EU better?
Have not found any clear information about the two, so can someone come with some good informations?
I found out that Realme Flash Tool works great to flash stock ROM or downgrade to previous versions. it can flash zip, ozip and gsi file formats for OS.

From little search on web, it seems like each firmware version was made for particular region. This means particular things will work better with firmware made for your particular area. So why to risk spoiling things by installing firmware made for another region?

I am trying to flash EU Firmware https://download.c.realme.com/osupdate/RMX2061EU_11_OTA_0380_all_EIeguy5zqMib.ozip on RMX2061
Currently, my device is RMX2061_11_A.41
Have anyone tried this?

gaduaxe said:
I am trying to flash EU Firmware https://download.c.realme.com/osupdate/RMX2061EU_11_OTA_0380_all_EIeguy5zqMib.ozip on RMX2061
Currently, my device is RMX2061_11_A.41
Have anyone tried this?
Click to expand...
Click to collapse
I have switched around from Indian, Global and EU roms with no problems many times in the past though now I use a CRDroid A12.1 custom rom

Veseleil said:
UPD. Found that 2063 is 2061EU, updated last, everything perfect
Click to expand...
Click to collapse
Hi @Veseleil
Did you flashing RMX2063 Firmware into RMX2061 successfully? Please give me a guidance
Tkx

gaduaxe said:
Hi @Veseleil
Did you flashing RMX2063 Firmware into RMX2061 successfully? Please give me a guidance
Tkx
Click to expand...
Click to collapse
Hi. It's been a long time since I did this.)
But, I remember exactly, that when version RMX2063 was indicated on the phone - I manually updated it with version RMX2061EU - then all following updates were stable over the air.
The update file was taken from this site (https://www.realme.com/eu/support/software-update) of the European region. Unfortunately, as of now, it does not seem to be up to date, but you can still try to install the version from this site, and after installing it, request an update over the air. There is a chance that the OTA update will start working.
If it helps, I saw another site (https://realmefirmware.com/realme-firmware-update/#google_vignette) with different versions, but I didn’t try to figure needed version out. Maybe it could be useful.
Good luck!

Question Error trying to update via OTA

A few weeks ago I bought the Oneplus 11, now that the latest version Global A.07 has come out, I get the following error, I have tried with Oxygen Updater and I still get an error when updating, I have automatic updates enabled from the developer options.
The model is CPH2451

MarcoMulato said:
A few weeks ago I bought the Oneplus 11, now that the latest version Global A.07 has come out, I get the following error, I have tried with Oxygen Updater and I still get an error when updating, I have automatic updates enabled from the developer options.
The model is CPH2451
Click to expand...
Click to collapse
cph2451 us usa not global
cph2449 is eu/global

ChrisFeiveel84 said:
cph2451 us usa not global
cph2449 is eu/global
Click to expand...
Click to collapse
Is there a way to convert.2451 to 2449?

MarcoMulato said:
A few weeks ago I bought the Oneplus 11, now that the latest version Global A.07 has come out, I get the following error, I have tried with Oxygen Updater and I still get an error when updating, I have automatic updates enabled from the developer options.
The model is CPH2451
Click to expand...
Click to collapse
If you're still on A.06 and trying to update to A.07 (and you're rooted on A.06), then you need to flash the stock A.06 init_boot.img before updating. Not 100% sure, but believe that someone posted the stock A.06 init_boot.img for the US version in one of the other threads on here, if not maybe you can ask in those threads if anyone has the unpatched A.06 init_boot.img as only way to do incremental update is if your system is stock. It's the bad part about the US only getting incremental updates instead of the full packages like every other region does.

plepew said:
Is there a way to convert.2451 to 2449?
Click to expand...
Click to collapse
Yes flash the eu build over fastbootd

MarcoMulato said:
A few weeks ago I bought the Oneplus 11, now that the latest version Global A.07 has come out, I get the following error, I have tried with Oxygen Updater and I still get an error when updating, I have automatic updates enabled from the developer options.
The model is CPH2451
Click to expand...
Click to collapse
I have the same issue, newly bought Oneplus 11 totally can't update at all. May I know how you solve it?

ericfong27 said:
I have the same issue, newly bought Oneplus 11 totally can't update at all. May I know how you solve it?
Click to expand...
Click to collapse
View the thread here. It has the stock A.06 and A.07 init_boot.img. You can flash which ever one you're currently on then update. I would also recommend following that guide to root the US version of the 11 in the future.

jeffsga88 said:
View the thread here. It has the stock A.06 and A.07 init_boot.img. You can flash which ever one you're currently on then update. I would also recommend following that guide to root the US version of the 11 in the future.
Click to expand...
Click to collapse
Thank you for your reply.
Do you have the guide how to convert from CPH2451 to others?

ericfong27 said:
Thank you for your reply.
Do you have the guide how to convert from CPH2451 to others?
Click to expand...
Click to collapse
No problem, also wouldn't personally recommend converting. You risk bricking for little to no advantage and if you do brick there's no free way to recover (as MSM is no longer free and open). I would just stay on 2451 and use that guide for updates.

ericfong27 said:
Thank you for your reply.
Do you have the guide how to convert from CPH2451 to others?
Click to expand...
Click to collapse
for convert from cph2451 to eu or co flash the build from other region over FBE ( and and delete all partitions with the tool that comes with COW)

ChrisFeiveel84 said:
for convert from cph2451 to eu or co flash the build from other region over FBE ( and and delete all partitions with the tool that comes with COW)
Click to expand...
Click to collapse
I have tried it, but failed. End up black screen + boot loop.
Then flash this file oplusstanvbk.img able to boot back CPH2451. Don't know why.

ericfong27 said:
I have tried it, but failed. End up black screen + boot loop.
Then flash this file oplusstanvbk.img able to boot back CPH2451. Don't know why.
Click to expand...
Click to collapse
is a known problem and I already posted it here on xda
(Its on all builds after the Update/flash from a07 build )