HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
something? PLEASE!
You mention you can not get into boot loader by pressing
Vol_- + reset.
Click to expand...
Click to collapse
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
try to make an hard reset by press vol down + central button + reset.
maybe you have to use mtty but I can't help you cause I never use it...
R3PUBL1K said:
You mention you can not get into boot loader by pressing
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Click to expand...
Click to collapse
That what I told volume down + reset not working with this phone. It is in another one which I have here.
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
viperbjk said:
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
Click to expand...
Click to collapse
I don't know I got this phone it this condition with a story about this error.
I don't actually know what happened, but I believe that this phone bricked down in the middle of unlocking process.
Zoosman said:
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
Click to expand...
Click to collapse
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
omar 1958 said:
...
2. with a fully charged battery, reset your device (hard reset) press Volume down + centre round button + soft reset(behind battery cover) all at the same time, release soft reset but keep holding volume down + centre button. You should now have a white screen advising you what to do to complete the hard reset.
Click to expand...
Click to collapse
Only to make a bit easy this step cause in this way one would be an octopus , soft reset your device with stylus and then, within 3 seconds, hold Vol down + centre round button until you see the tricolour screen. Release the buttons and follow the instructions (Press Vol Up to restore to manufactured settings).
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
sorry friend to hear but i have one solution may be it can work u just flash hard spl v 1.93 olinex from here:http://ficca.bounceme.net/download/HARDSpl_Diamond_OliNex_1.93_Unsigned.zip just flash this hspl and after flashing this u can flash any rom but now u just flash this hspl if u got 100% then ur prob is solve so pls tell me what happen after that hope every thing will be alright good luck
Error 260 is a USB communication error. Did this happen during sim unlock or during hardspl install because the thread title says one thing and your post says another.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
R3PUBL1K said:
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
Click to expand...
Click to collapse
I have the same problem.. i tried a flash and then it wont turn on.. not even hard reset not even soft reset.. it wont even charge or indicate charging.
charly_mx said:
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Click to expand...
Click to collapse
Hey charly, i flashed my phones many times, i've bricked it , got stuck on the tricolour screen.... but this time it's different... the phone it's completely dead... no light .. not charging no tricolour .. nothing:S
try this method for ur diamond
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
noluck
rahmaneee said:
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
Click to expand...
Click to collapse
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
constantine_mk said:
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
Click to expand...
Click to collapse
... Because THAT will fix it
hahahha, no no no... the PDA fary will..
dieselboy said:
... Because THAT will fix it
Click to expand...
Click to collapse
hahahha, no no no... the PDA fary will..
a did some measurements, the battery was 2.8V, i put it on the phone, put the phone in ccharger, and it did charge the batery to 3.7V(even the baterry led is not working).. i measured the phone also it gives 4.15V to the battery... i dont know is he charging correctly.. but it's charging the battery for sure.. ..... any clues ppl?
hello everyone my galaxy wonder don't turn on and i can't enter in download mode and recovery mode i try all possible metod...but nothing...
Someone can help me pleace..?
Sorry for my bad english...
can you please tell us.. what did you do before to your phone?
details please?
Sent from my GT-I8150 using xda
Seems like you had accidentally hard-bricked your phone, if that really happen the only solution is send back to Samsung Service Centre as you will have to replace your mainboard, anyway please tell a little bit more details so we can confirm what had happened to your phone
MyDeSTiNaTe said:
Seems like you had accidentally hard-bricked your phone, if that really happen the only solution is send back to Samsung Service Centre as you will have to replace your mainboard, anyway please tell a little bit more details so we can confirm what had happened to your phone
Click to expand...
Click to collapse
i flesh a recovery maybe this is the problem so i can't boot the phone so i can buy a jig dongle to try by myself to work the phone or assisstence...
flash, what steps had you done?
it should be safe..
I was trying to change the partions on my phone and it must have been wrong because it will not turn on at all it wont do anything and my pc identifies it as some wierd name. Please Help!:crying:
I'm sorry, but a very bad idea....unless you're a very experienced programmer. Chances are it is bricked, but can you add some detail?
What does widows show it as, exactly.
And if you hold the power button and volume up and down all at the same time, does anything happen??
Does the phone do anything at all?
And exactly what did you try to do?
Good luck! ?
kj2112 said:
I'm sorry, but a very bad idea....unless you're a very experienced programmer. Chances are it is bricked, but can you add some detail?
What does widows show it as, exactly.
And if you hold the power button and volume up and down all at the same time, does anything happen??
Does the phone do anything at all?
And exactly what did you try to do?
Good luck! ?
Click to expand...
Click to collapse
can you look at my thread and maybe help me!?
Hey there
Let me tell what happened...
A few days ago i got my Cell Phone back from the Cops, they had taken it to save proofs for a crime i didnt do and i had to take it back from the Department.
Now i gave my autogram and got it back but it won´t turn on
I cannot enter CMW Recovery, neither Download mode
Arrived at home i found out that it connects to the PC and answers to me that i need a QHUSB_DLOAD Driver... so i got this and i read in some Forum that i need to geht QPST...
so now i have qpst and the driver so its identified as Com9 on my computer.... but at this point i don´t have any idea what to do.... Someone in here who had the Same Problem or someone in here who can help me?
The Phone is an Samsung Galaxy S4 Mini Serranoltexx GT-1595
Please help me
Greets
Any Ideas? Please!
Now i downloaded an Debrick Image tryin to fix my phone and wrote it with Win32DiskImager on my SDcard (16gb)
put it into my Smartphone and pressed the Power button but nothing happened....
Whats the Cure for this? i´m loosing all my nerves
May Somebody help me?
No Bootloader No Recovery Nothing Just QHSUSB 9008 Showing In Device Manager
Can Someone Help Me Out?
I need Tot (V13b) File if someone can provide
Thanks In Advance
LG-US986
I also cant get an LG to start up. Could this have to do with the radio update for LTE in AL? It doesn't vibrate or anything when you hold power button.
Same problem... help me please
G4 is quite harsh believe me ... in an attempt to do hard reset or something similar it crashed itself. Anyway a very good solution in these situation I had find out is insane, really! SOLUTION
Take screw driver, unscrew the back .... take out the motherboard only ... put the motherboard in plastic concealed wrapper .... n put that wrapper in freezer for a night, next day Take out the wrapper n attach ur motherboard back with rest of ur phone ... plugged in ur battery n turn it on ... praise to Allah if this solution work with u guys too . Thanks