Related
Hi,
I have searched the internet, youtube and this forum and can't find what I need.
A family friend died this past week. Some of you may have read about the 39 year old Trinity, FL man who drowned off Key West boating with his 10 year old daughter and other friends.
He ran his own lawn care business and used a Galaxy note on AT&T and a Galaxy note 2 on Tmobile. Both phones are needed to retrieve his business information so his family can restructure the company and move on with their lives. He also stored many many pictures very valuable to his Daughter and family.
The problem is they are both password protected. I have been searching for a downloadable no lock.zip file to run from recovery. I tried no lock.apk but it doesn't work. These are both password protected so I can't go in and enable usb debugging. No indication that they have ever been modded. Binary counter is at 0 with official Samsung rom.
Can anyone help?
Thanks
Hey buddy the only way is to factory reset using stock recovery if you are not rooted. You will still be able to keep everything that's on his SD. And contacts from sim. Only option if your not rooted.....with the phone off. Hold volume up, power button, and homekey at the same time. Hold it until you see the stock recovery. Now you will navigate with volume rockers to factory reset...
hard reset
G7Baker said:
Hey buddy the only way is to factory reset using stock recovery if you are not rooted. You will still be able to keep everything that's on his SD. And contacts from sim. Only option if your not rooted.....with the phone off. Hold volume up, power button, and homekey at the same time. Hold it until you see the stock recovery. Now you will navigate with volume rockers to factory reset...
Click to expand...
Click to collapse
Hi and thanks,
We considered hard reset but they don't want to lose any data if possible. Can this be done by T Mobile? Do they have any method?
No they won't. They will also factory reset. Sorry bro. Is his password a pattern or pin?
---------- Post added at 06:58 AM ---------- Previous post was at 06:56 AM ----------
Take a look at this http://www.youtube.com/watch?v=6i-0t63wOII
security flaw!!!
G7Baker said:
No they won't. They will also factory reset. Sorry bro. Is his password a pattern or pin?
---------- Post added at 06:58 AM ---------- Previous post was at 06:56 AM ----------
Take a look at this http://www.youtube.com/watch?v=6i-0t63wOII
Click to expand...
Click to collapse
YES, I tried that !!!!! My eyes are PERMANENTLY CROSSED NOW. WOW, I see that they CAN DO IT. Way beyond my capabilities!!!!
Think I am going to sit my Son down(19) and the step Son(18) of the unfortunate man and tell them it's a video game!!!!
THANKS!!!!!
If ANYONE develops a "NO LOCK.ZIP" please let me know!!!
Thank You!!!
Yea no problem. Thats what we are here for. To learn and teach....
Dont for get to hit Thanks when someone trys to help you
flaw
G7Baker said:
No they won't. They will also factory reset. Sorry bro. Is his password a pattern or pin?
---------- Post added at 06:58 AM ---------- Previous post was at 06:56 AM ----------
Take a look at this http://www.youtube.com/watch?v=6i-0t63wOII
Click to expand...
Click to collapse
believe it or not I WAS successful downloading AND installing no lock. Unfortunately, This phone must be running a different OS version. I KNOW I opened the program several times but it doesn't take over and unlock the screen lock like the video shows.
success!!
scm37 said:
believe it or not I WAS successful downloading AND installing no lock. Unfortunately, This phone must be running a different OS version. I KNOW I opened the program several times but it doesn't take over and unlock the screen lock like the video shows.
Click to expand...
Click to collapse
OK, I WAS able to use that security hole."No Lock" didn't work by itself but in conjunction with "No Lock Screen" I was able to access No Lock AFTER using No Lock Screen!!!
Thanks goes out to Mr. Eden!!!!!
For some reason. My phone would not find my external memory card. So I decided to go into TWRP to (I believe its called format)
the card (lose everything on it)
Well. Both attempts failed, So I clicked on Reboot phone and now my phone will not turn on what so ever. Nothing will show up. If I plug it into a computer the computer will find it, but the phone screen will not show anything
Damn it all!!!!
Any ideas?
Can you flash stock firmware back?
did you change your DPI or mess with the build.prop?
just reread your post, if you can, reflash the stock rom since you can't turn it on.
xryousukex said:
did you change your DPI or mess with the build.prop?
just reread your post, if you can, reflash the stock rom since you can't turn it on.
Click to expand...
Click to collapse
yes to both
wellsey1126 said:
yes to both
Click to expand...
Click to collapse
how do i do that without being able to turn it on
wellsey1126 said:
how do i do that without being able to turn it on
Click to expand...
Click to collapse
how do i do it on a mac?
I was able to get to a PC. My issue is I cannot tell if the phone is in download mode. Again the phone doesn't turn on. But if I plug it to a computer. The computer does see it.
Lol
AWESOME G3
---------- Post added at 10:44 PM ---------- Previous post was at 10:40 PM ----------
http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/
AWESOME G3
---------- Post added at 10:44 PM ---------- Previous post was at 10:44 PM ----------
Watch video and then do it
AWESOME G3
BACARDILIMON said:
Lol
AWESOME G3
---------- Post added at 10:44 PM ---------- Previous post was at 10:40 PM ----------
http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/
AWESOME G3
---------- Post added at 10:44 PM ---------- Previous post was at 10:44 PM ----------
Watch video and then do it
AWESOME G3
Click to expand...
Click to collapse
Not working. For some reasons anytime I donwload the drivers it say they are installed yet when I plug my phone in it says that I have to troubleshoot and its unable to find the drivers. (restarted pc etc)
Again when I hold the Vol up button and plug my phone in. You hear the computer find something, but the screen doesn't turn on what so ever. (Doesn't say download mode etc)
wellsey1126 said:
Not working. For some reasons anytime I donwload the drivers it say they are installed yet when I plug my phone in it says that I have to troubleshoot and its unable to find the drivers. (restarted pc etc)
Again when I hold the Vol up button and plug my phone in. You hear the computer find something, but the screen doesn't turn on what so ever. (Doesn't say download mode etc)
Click to expand...
Click to collapse
So with a battery pull for 20 seconds you put battery in and hold power and down button you don't see anything
AWESOME G3
BACARDILIMON said:
So with a battery pull for 20 seconds you put battery in and hold power and down button you don't see anything
AWESOME G3
Click to expand...
Click to collapse
Nothing. Screen will not turn on
wellsey1126 said:
Nothing. Screen will not turn on
Click to expand...
Click to collapse
Sorry bro time for a new one. Make the call and get exchange. Don't touch DPI..
AWESOME G3
wellsey1126 said:
Nothing. Screen will not turn on
Click to expand...
Click to collapse
OK cause I was bored I did what you did. My only thing is I removed my external SD card just in case. Added all the xposed junk most do and set my DPI at first to 530. Phone did not like. So went with 540 phone was OK so it seems. Went and installed no used SD card and went into recovery and did what u said u did. Phone went dark after tying reboot. DPI definitely was the issue. I am guess you had urs set to 530 or 540. Downloaded lg flashtool. Stock firmware. Pulled battery and what not when I hold power it would vib but no screen. Pulled battery held vol up as I plug in. Heard computer make noises and search for drivers. Opened lg tool and followed the rest of video . took a bit but phone is back to stock. Rerooted and flashed my backup all good. You sure you followed his video. Many people have used it and worked perfect.
AWESOME G3
Did you change the dpi manually ?
Galaxysm said:
Did you change the dpi manually ?
Click to expand...
Click to collapse
I changed it with app. He did say he changed build prop so I guessing yes.
AWESOME G3
BACARDILIMON said:
I changed it with app. He did say he changed build prop so I guessing yes.
AWESOME G3
Click to expand...
Click to collapse
That's the problem. When changing dpi u need to use a app. A friend got into a bootloop for doing that. But he was able to fix it.
Galaxysm said:
That's the problem. When changing dpi u need to use a app. A friend got into a bootloop for doing that. But he was able to fix it.
Click to expand...
Click to collapse
I agree but it still comes back he having the issue that screen is dead. Black. I think a lot more to this story
AWESOME G3
BACARDILIMON said:
I agree but it still comes back he having the issue that screen is dead. Black. I think a lot more to this story
AWESOME G3
Click to expand...
Click to collapse
Could be he wiped the entire phone?
Galaxysm said:
Could be he wiped the entire phone?
Click to expand...
Click to collapse
Could be but either way with lg tool it loads it all back
AWESOME G3
What would changing the DPI have to do with the phone not booting? Not saying anyone is wrong but I've had my share of phones and I've never heard of anything like that? I'm using 570 as my DPI with no issues at all. I've used both an app to change it and manually doing it. I'm definitely interested if that is actually what caused the issue.
Today I was in my car sitting in a parking lot, had my phone propped on my steering wheel with the txt app open when the screen when blue then shut down. I tried to power it on but it wouldn't come on, I pulled the battery hit the power button, the LG logo came up for a few seconds then shut off and the only way to turn it on again would be to pull the battery. Holding the power and volume rocker button down will turn it on to recovery. The phone is rooted so when I go to factory reset i've had 2 times it loaded to TWERP recovery but then the blue screen would come up again and I can't do anything. Most of the time it will end up in a green screen with the TC Crash, Demigod crash screen. Plugging it into my computer does load it as a device but I'm not able to access the phones storage. Has anyone ran into this issue and first question, is there anyway to recover data? Second question, is this a hardware related issue? I'm about to try and flash it back to stock since I can't get into TWERP but i'll wait for a response before I do that.
I tried to boot to download mode, I hold the volume up rocker and then plug in a USB, it shows download mode icon for a quick second but the screen goes black. I tried the LG flash tool but it doesn't get past step 1. Any one have any ideas i'm fresh out. Only new thing to report is sometimes instead of the green TZ crash i'm getting an orange RMP crash screen but with the same options as the green screen.
Need to know know a little more before I can reach my decision on where to start.
ROM
Kernel
Thermal mods
Was the phone hot?
Does it get hot upon starting?
Baseband?
I had this happen before but never to the extent that your explaining. Kind of sounds like a kernel panic.
DroidsOnRoids said:
Need to know know a little more before I can reach my decision on where to start.
ROM
Kernel
Thermal mods
Was the phone hot?
Does it get hot upon starting?
Baseband?
I had this happen before but never to the extent that your explaining. Kind of sounds like a kernel panic.
Click to expand...
Click to collapse
I can tell you what ROM it was and thats about it. Resurrection-Remix-LP-v5.5.8-20151027-vs985
Was running sold for months. Phone wasn't hot and didn't notice it getting hot at start up. Phone had 99% battery last time I checked before the blue screen.
I did some research about the LG G3 and blue screen and its a common issue from what i've found. No fix really
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 u could try this
TheMadScientist420 said:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 u could try this
Click to expand...
Click to collapse
WOW, not sure about that. I'll see. Going to call verizon and see if they can do anything first.
Youll have to pay cause ure waranty is voided being rooted its a sure fire fix for almost all hard bricks and everything its not as bad as it looks i have had to myself on my g2 and g3
---------- Post added at 06:07 PM ---------- Previous post was at 06:02 PM ----------
Do u get the screen press up for dl mode. Try a bat pull and boot into recovery if possible
TheMadScientist420 said:
Youll have to pay cause ure waranty is voided being rooted its a sure fire fix for almost all hard bricks and everything its not as bad as it looks i have had to myself on my g2 and g3
Click to expand...
Click to collapse
Are you sure its a hard brick? From all the things i've read about this blue screen is its a hardware issue. My phone is showing up in the device manager under ports. Can I skip the first part?
Itsna kernal panick some people claim its from over heat others other issues if ure phonenshows up as qusb bulk or something like that then i believe u can the pin groung is to reset it to get it into bulk mode so from there u reflash all the primary gtp partitions then u can get to download mode to restore using stock tot. Ive nevernhad this issue happen but no its not technicly a hard brick but so far i cant find a solution but the method ive shown u usaully brings back all bricks and issues it could be a hardware issue but 9 outa 10 times its a software or firmware issue
---------- Post added at 06:20 PM ---------- Previous post was at 06:15 PM ----------
If u got usbbulk mode on com ports not step 4 but num 4 further down the page is where u start but u have to dl wilcracker and ure stock tot file
TheMadScientist420 said:
Itsna kernal panick some people claim its from over heat others other issues if ure phonenshows up as qusb bulk or something like that then i believe u can the pin groung is to reset it to get it into bulk mode so from there u reflash all the primary gtp partitions then u can get to download mode to restore using stock tot. Ive nevernhad this issue happen but no its not technicly a hard brick but so far i cant find a solution but the method ive shown u usaully brings back all bricks and issues it could be a hardware issue but 9 outa 10 times its a software or firmware issue
---------- Post added at 06:20 PM ---------- Previous post was at 06:15 PM ----------
If u got usbbulk mode on com ports not step 4 but num 4 further down the page is where u start but u have to dl wilcracker and ure stock tot file
Click to expand...
Click to collapse
OK thanks. I mean I guess I don't have anything to loose, so i'll give it a shot.
Like i said i couldnt find a solution im no developer ive just been rooting and modding since the first og moto droid ive bricked and fixed a lot of phones this may not be the proper solution i just no its work for a lot of people on a lot of diffrent bricks on both g2 and g3 i know basicly the g2 is unbri kable and sofar so has the g3 since this i wish it was a general sticky
---------- Post added at 07:07 PM ---------- Previous post was at 07:00 PM ----------
You can try calling lg but i consider there tecks dumber the crap but they get paid for what they do again 9 outa 10 times they cant help other than u sending it in for repair like i said ure rooted if they find out it is its fixed on ure dime i dont know no cell company has ever helped me out.
What do kind of wire do you suggest using?
I used acouple strands of speaker wire coiled up and a pair of tweezers to hold it end bent it to touch both so i still had a free hand
TheMadScientist420 said:
I used acouple strands of speaker wire coiled up and a pair of tweezers to hold it end bent it to touch both so i still had a free hand
Click to expand...
Click to collapse
This is impossible!
joel71 said:
This is impossible!
Click to expand...
Click to collapse
When u plug into ure pc what ports or coms. What xoez the fone shop up az
TheMadScientist420 said:
When u plug into ure pc what ports or coms. What xoez the fone shop up az
Click to expand...
Click to collapse
After trying for what felt like forever I got it kind of work once. It showed up as QCBATCH on port 6. But once I broke connection it went away and I wasn't able to get it to work again. I'll give it another try sometime today..
Sometimes it takes a bunch of trys
TheMadScientist420 said:
Sometimes it takes a bunch of trys
Click to expand...
Click to collapse
Got it working on the first try today. I used the SIM Card bay for a ground so I didn't have to hold it. Much easier, flashing now, will report back after.
joel71 said:
Got it working on the first try today. I used the SIM Card bay for a ground so I didn't have to hold it. Much easier, flashing now, will report back after.
Click to expand...
Click to collapse
Let me no how it goes
I did the steps but it still booted to a RPM CRASH screen, I couldn't get into download mode. I'm trying to flash Cache, System, Userdata, and SB1 now.
Hi, my phone suffered from bootloop and according to the tremendous posts about this problem the answer was always laying in buying a new original battery, which i did but still the bootloop continues, may open for a few hours then bootlop again,
if anyone could help that would be appreciated because i'm giving on the phone now
mines doing the same thing with the original battery..
interested in the answer before i outlay for a v20.
---------- Post added at 11:24 PM ---------- Previous post was at 10:33 PM ----------
I had a bit of a hunt around and i noted that the phone has an issue with the WiFi.. so i disabled the WiFi and Bluetooth in the settings
as a precaution i ran some tape over the NFC and Qi battery charging connectors, blocking these connections.
if this solves the problems.. ill be outlaying for a new phone soon.. ill wait for the G6 to come out before considering the v20
ill post back in a week if i experience the same issues.
looks like this did not fix the issue.. i will try a custom ROM tonight to see if it fixes the issue..
i am wondering if the battery is the key here, it is possible that the software is seeing the battery voltage and when it drops below a certain volt the OS automatically shuts down the phone to protect itself..
as i only see the boot loop when i am launching particular heavy load apps. and i don't see this happening when the battery is at 100%
---------- Post added at 03:36 PM ---------- Previous post was at 03:21 PM ----------
https://forum.xda-developers.com/lg-g3/general/random-shutdowns-reboots-t3553374
some interesting points here.
Do you have a reboot (phone restart) or a bootloop (phone try to restart but it never pass the boot screen)?
Have you noticed temperature issues?
If you have already tried return to stock and the problem continue it probably is a hardware failure.
Regards
Sent from my phone
ypsmav said:
Do you have a reboot (phone restart) or a bootloop (phone try to restart but it never pass the boot screen)?
Have you noticed temperature issues?
If you have already tried return to stock and the problem continue it probably is a hardware failure.
Regards
Sent from my phone
Click to expand...
Click to collapse
before with the old battery it started to freeze and restart then it got worse, it closes and bunch of bootloops then open then 2 minutes and bootloop again, until it permanently bootlooped ,so i bought new original battery from lg store and the phone opened first time then 5 mins later it restarted then bootlooped once again, thing is, by the new battery it opens sits for an half an hour or less then bootloop, with the old battery it never passes the lg logo.
mrpea said:
looks like this did not fix the issue.. i will try a custom ROM tonight to see if it fixes the issue..
i am wondering if the battery is the key here, it is possible that the software is seeing the battery voltage and when it drops below a certain volt the OS automatically shuts down the phone to protect itself..
as i only see the boot loop when i am launching particular heavy load apps. and i don't see this happening when the battery is at 100%
---------- Post added at 03:36 PM ---------- Previous post was at 03:21 PM ----------
https://forum.xda-developers.com/lg-g3/general/random-shutdowns-reboots-t3553374
some interesting points here.
Click to expand...
Click to collapse
thanks for the share , tell me if you tried anything and whether it works or not.
Farius said:
thanks for the share , tell me if you tried anything and whether it works or not.
Click to expand...
Click to collapse
Hi , I have the exact same problem and i thought changing battery is the solution but i got my new battery today and everything was fine at the begining but later when the phone tried to update some apps again it turned off .
I had this issue suddenly few days ago after install some apps or some updates .. I am hoping it is because of software issues and can be fixed after factory reset.
(phone able to start when it is colder , so i tried to put it 2 min in freezer and it started but just tried one time , i dont know just coincidence )
I tried to update my firmware to 6.0 MM , so nothing change.
Looks like nobody able to solve this problem. Now my phone is just garbage
1sin1 said:
Hi , I have the exact same problem and i thought changing battery is the solution but i got my new battery today and everything was fine at the begining but later when the phone tried to update some apps again it turned off .
I had this issue suddenly few days ago after install some apps or some updates .. I am hoping it is because of software issues and can be fixed after factory reset.
(phone able to start when it is colder , so i tried to put it 2 min in freezer and it started but just tried one time , i dont know just coincidence )
Click to expand...
Click to collapse
I noticed the same thing, it works fine when it's cold or normal then lag and restart when it's hot (38C+), today i tried to disable heating lag and the thermal mitigation thing but still doing the same..
Farius said:
before with the old battery it started to freeze and restart then it got worse, it closes and bunch of bootloops then open then 2 minutes and bootloop again, until it permanently bootlooped ,so i bought new original battery from lg store and the phone opened first time then 5 mins later it restarted then bootlooped once again, thing is, by the new battery it opens sits for an half an hour or less then bootloop, with the old battery it never passes the lg logo.
Click to expand...
Click to collapse
It seems the problem is related to hardware.
Sent from my LG-D855 using Tapatalk
After so many tries finally "kind of" stable solution i found.
Rooted phone and use No-frill Cpu app to block my cpu speed on 1 ghz .. so far no loop or restart ... we will see
1sin1 said:
After so many tries finally "kind of" stable solution i found.
Rooted phone and use No-frill Cpu app to block my cpu speed on 1 ghz .. so far no loop or restart ... we will see
Click to expand...
Click to collapse
what about now ?
Farius said:
what about now ?
Click to expand...
Click to collapse
It is even better now because I opened up my phone and heatsinked the cpu .. I am still using lower cpu freq but even works without cpu adjustment after heat sink .. Now using 1.5 ghz just for incase.
(Still sometimes turning off itself when charging) Would be even better with heat sink pad i guess
I had heard that adding a 0.5mm thermal pad to the SOC makes its run a little cooler, but i do seem to think the battery is the main culprit, the main problem with getting a replacement battery which operates within the same tolerances.
downclocking the cpu to 2.0-2.2ghz with a fresh battery and adding a thermal pad on the SOC seems like the best solution..
I have since upgraded to a v20.. so hopefully it doesn't happen with that phone..
Some old original baterries have an issue that swollen a bit and the phone starts rebooting itself. But I don't remember from which year the good ones are manufactured.
Try testing with a generic battery (as I do) to see if that's the issue.
If you still have the battery's warranty, claim it.
I got a new battery, then charged it fully, then added an empty SD card to back up the data. Connected to a fast charger., otherwise it is not enough power to keep it on, causing a bootloop. The phone must be cool, not powered on for some time (overnight, in my situation).
I was able to back up the data., my main goal. I have heard others being able to fix it, and it works for some time, but soon enough this trick no longer works.
Hello All,
I have been using Lineage OS on my rooted HTC One M9 for more than 6 months. Everything was working fine, only battery backup was not good(old Battery). A week ago when i pulled my phone out of my pocket, it was off, tried turning it on, didn't work. When connected to charger nothing happens, tried to go to bootloader/recocvery mode did not work.
After googling all this, i found about field test mode, that also is not working, tried.
Tried charging with stock charger, different charger, USB to laptop... nothing.
However, when phone is connected to laptop, windows 10 notification sound comes up but phone is not detected.
Seems like the soul has left the phone.
Please Help!!
Change out the battery. If that doesn’t work, it also sounds like the Motherboard went out.
Battery dead
The soul must be in sleep,is not dead but the battery is gone
R.I.P battery (we will miss you)
Change you battery dude
;( can't upload pic of problem "network error"
I'll got 4x HTC m9 from an ex HTC employee and he told me one of them had a problem and he wasn't sure really what the problem was but he told me the phone keeps rebooting, so I thought wellllll I flashed like every single galaxy from 1 to 10 and ofcourse i faced some times i did got it semi bricked but after moments of rage and eating excessive amounts of instant noodles I was always luckily able to fix it. Now this m9 says on the screen
Blackbox: Software status modified
Pink: locked
Orange: s-on
Pink : security warning
Got 4 choises
Reboot
Reboot to bootloader
Boot to recovery
Power down
Now all of these options don't work... even power down will reboot back to this screen and recovery option gives message that it's a development version.
Some people claim it's fixable by sending RUU? With Odin or boot.img other story's saying EMMc bricked.. since xda is the only place where I can actually get an answer from people knowing what they are talking about.. is it dead? If it's not I just put some more time in it.. at least the phone gets detected by my PC when my s6 edge had a eMMC brick it would show up as (no USB id for devicediscriptor...
influenza026 said:
;( can't upload pic of problem "network error"
I'll got 4x HTC m9 from an ex HTC employee and he told me one of them had a problem and he wasn't sure really what the problem was but he told me the phone keeps rebooting, so I thought wellllll I flashed like every single galaxy from 1 to 10 and ofcourse i faced some times i did got it semi bricked but after moments of rage and eating excessive amounts of instant noodles I was always luckily able to fix it. Now this m9 says on the screen
Blackbox: Software status modified
Pink: locked
Orange: s-on
Pink : security warning
Got 4 choises
Reboot
Reboot to bootloader
Boot to recovery
Power down
Now all of these options don't work... even power down will reboot back to this screen and recovery option gives message that it's a development version.
Some people claim it's fixable by sending RUU? With Odin or boot.img other story's saying EMMc bricked.. since xda is the only place where I can actually get an answer from people knowing what they are talking about.. is it dead? If it's not I just put some more time in it.. at least the phone gets detected by my PC when my s6 edge had a eMMC brick it would show up as (no USB id for devicediscriptor...
Click to expand...
Click to collapse
Well,i am not a development or something like that but my idea is(not a good idea but anyway) it seems that you have to download a little lot of Rom's and if non of them works it is a refurbished item from Htc.co (this is my opinion)
For better answer(of course that have intelligent people than me)you better ask them privately
---------- Post added at 12:56 PM ---------- Previous post was at 12:55 PM ----------
Can you give me that broken Htc?
ford1234 said:
Well,i am not a development or something like that but my idea is(not a good idea but anyway) it seems that you have to download a little lot of Rom's and if non of them works it is a refurbished item from Htc.co (this is my opinion)
For better answer(of course that have intelligent people than me)you better ask them privately
---------- Post added at 12:56 PM ---------- Previous post was at 12:55 PM ----------
Can you give me that broken Htc?
Click to expand...
Click to collapse
Unable to flash rom trough RUU always get message the battery is below 30% and that cannot be true.
influenza026 said:
Unable to flash rom trough RUU always get message the battery is below 30% and that cannot be true.
Click to expand...
Click to collapse
Of course not that is true