Related
how to install Z5 Premium Dual E6833 Marshmallow custom recovery like twrp&cwm / root
Hello everybody
This is my first Post New Thread
so help me if you guys can
how to install Xperia Z5 Premium Dual E6833 Marshmallow custom recovery like twrp&cwm / root
I am Waiting
Unlock your bootloader, then follow http://forum.xda-developers.com/z5-premium/development/rootable-kernel-twrp-3-e6853-t3334295
slayerz said:
Unlock your bootloader, then follow http://forum.xda-developers.com/z5-premium/development/rootable-kernel-twrp-3-e6853-t3334295
Click to expand...
Click to collapse
This is not same model
my xperia z5 premium dual E6833
abuawaahed said:
This is not same model
my xperia z5 premium dual E6833
Click to expand...
Click to collapse
Hi,
the naming/labelling convention in the fstab is identical
the way the bootrec setup is done, only the ramdisk of the recovery is extracted
so the recovery should be compatible.
so flash the recovery.img with fastboot AFTER flashing the boot.img then reboot and wait for the led signal to push volume button
to enter recovery. it should boot. Make a full of partial backup the reboot to normal operation and goto /sdcard/TWRP/back/blah/whatever
if the sizes look correct then you should be sorted.
m
abuawaahed said:
This is not same model
my xperia z5 premium dual E6833
Click to expand...
Click to collapse
Mine is 6833 too! Works all the same.
slayerz said:
Mine is 6833 too! Works all the same.
Click to expand...
Click to collapse
But I cannot understand how to do
Please explain me step by step
Sorry for bad English
abuawaahed said:
But I cannot understand how to do
Please explain me step by step
Sorry for bad English
Click to expand...
Click to collapse
Is your bootloader unlocked?
slayerz said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
Yes my bootloader is unlocked
abuawaahed said:
Yes my bootloader is unlocked
Click to expand...
Click to collapse
E6853_MM_ROOTABLE_PERMISSIVE_boot.img
E6883_MM_ROOTABLE_PERMISSIVE_boot.img
which one
abuawaahed said:
E6853_MM_ROOTABLE_PERMISSIVE_boot.img
E6883_MM_ROOTABLE_PERMISSIVE_boot.img
which one
Click to expand...
Click to collapse
Just use the fastboot commands same as you did when you unlocked your bootloader.
Switch off phone, hold Volume Up and connect your original USB cable.
Then fastboot flash the *.img from the guide above.
Use:
E6883_MM_ROOTABLE_PERMISSIVE_boot.img
slayerz said:
Just use the fastboot commands same as you did when you unlocked your bootloader.
Switch off phone, hold Volume Up and connect your original USB cable.
Then fastboot flash the *.img from the guide above.
Use:
E6883_MM_ROOTABLE_PERMISSIVE_boot.img
Click to expand...
Click to collapse
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery E6883_MM
_ROOTABLE_PERMISSIVE_boot.img flash recovery E6883_MM_ROOTABLE_PERMISSIVE_boot.i
mg
target reported max download size of 536870912 bytes
sending 'recovery' (15548 KB)...
OKAY [ 0.362s]
writing 'recovery'...
OKAY [ 0.172s]
sending 'recovery' (15548 KB)...
OKAY [ 0.363s]
writing 'recovery'...
OKAY [ 0.174s]
finished. total time: 1.082s
C:\Program Files (x86)\Minimal ADB and Fastboot>
done
than what do do
abuawaahed said:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery E6883_MM
_ROOTABLE_PERMISSIVE_boot.img flash recovery E6883_MM_ROOTABLE_PERMISSIVE_boot.i
mg
target reported max download size of 536870912 bytes
sending 'recovery' (15548 KB)...
OKAY [ 0.362s]
writing 'recovery'...
OKAY [ 0.172s]
sending 'recovery' (15548 KB)...
OKAY [ 0.363s]
writing 'recovery'...
OKAY [ 0.174s]
finished. total time: 1.082s
C:\Program Files (x86)\Minimal ADB and Fastboot>
done
than what do do
Click to expand...
Click to collapse
next what
abuawaahed said:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery E6883_MM
_ROOTABLE_PERMISSIVE_boot.img flash recovery E6883_MM_ROOTABLE_PERMISSIVE_boot.i
mg
target reported max download size of 536870912 bytes
sending 'recovery' (15548 KB)...
OKAY [ 0.362s]
writing 'recovery'...
OKAY [ 0.172s]
sending 'recovery' (15548 KB)...
OKAY [ 0.363s]
writing 'recovery'...
OKAY [ 0.174s]
finished. total time: 1.082s
C:\Program Files (x86)\Minimal ADB and Fastboot>
done
than what do do
Click to expand...
Click to collapse
Then flash the TWRP recovery similarly, [E68XX_TWRP3_recovery.img] and you're done!
You can follow up with drmrestore.zip, xposed-v80-sdk23-arm64.zip, etc...
I just did and had no issues. Do make a TWRP backup first however.
http://forum.xda-developers.com/xperia-z5/development/sony-credentials-restore-unlocking-t3296383
http://forum.xda-developers.com/showthread.php?p=58949255#post58949255
abuawaahed said:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery E6883_MM
_ROOTABLE_PERMISSIVE_boot.img flash recovery E6883_MM_ROOTABLE_PERMISSIVE_boot.i
mg
target reported max download size of 536870912 bytes
sending 'recovery' (15548 KB)...
OKAY [ 0.362s]
writing 'recovery'...
OKAY [ 0.172s]
sending 'recovery' (15548 KB)...
OKAY [ 0.363s]
writing 'recovery'...
OKAY [ 0.174s]
finished. total time: 1.082s
C:\Program Files (x86)\Minimal ADB and Fastboot>
done
than what do do
Click to expand...
Click to collapse
slayerz said:
Then flash the TWRP recovery similarly, [E68XX_TWRP3_recovery.img] and you're done!
You can follow up with drmrestore.zip, xposed-v80-sdk23-arm64.zip, etc...
I just did and had no issues. Do make a TWRP backup first however.
http://forum.xda-developers.com/xperia-z5/development/sony-credentials-restore-unlocking-t3296383
http://forum.xda-developers.com/showthread.php?p=58949255#post58949255
Click to expand...
Click to collapse
how to enter TWRP recovery mode
abuawaahed said:
how to enter TWRP recovery mode
Click to expand...
Click to collapse
Reboot your phone. When you see an amber light appear on the notification led, hold Volume Up. It should change color - and you can release the volume button.
slayerz said:
Reboot your phone. When you see an amber light appear on the notification led, hold Volume Up. It should change color - and you can release the volume button.
Click to expand...
Click to collapse
not working recovery mode
abuawaahed said:
not working recovery mode
Click to expand...
Click to collapse
i cannot enter recovery mode
doing same you told
amber light not appear any colour
restart phone
abuawaahed said:
not working recovery mode
Click to expand...
Click to collapse
You used the wrong commands to flash!!
fastboot flash boot E6883_MM_ROOTABLE_PERMISSIVE_boot.img
fastboot flash recovery E68XX_TWRP3_recovery.img
slayerz said:
You used the wrong commands to flash!!
fastboot flash boot E6883_MM_ROOTABLE_PERMISSIVE_boot.img
fastboot flash recovery E68XX_TWRP3_recovery.img
Click to expand...
Click to collapse
thanks bro this time working:good::good::good:
I was about to manually install the lineageOS update, but I accidentally swiped factory restore. Is there anyway I can get the update file online? I tried starting from the top by wiping everything and reinstalling the rom but it only boots me into TWRP. I also tried restoring backup files but is also boots me into TWRP. I am stuck.
PS: I tried the "fastboot continue" method but it boots me into TWRP.
reboot to fastboot mode. flash stock bootloader and recovery. reboot in stock recovery and then factory reset device and sideload firmware. alternatively you can flash raw firmware manually
sukhwant717 said:
reboot to fastboot mode. flash stock bootloader and recovery. reboot in stock recovery and then factory reset device and sideload firmware. alternatively you can flash raw firmware manually
Click to expand...
Click to collapse
Thank you for your response, Sir. I really appreciate it. Where do I get the stock bootloader and recovery, and how do I flash them? On the alternative method, do you mean I should install the stock rom? I'm sorry. I'm really not good at this; I'm just good at following tutorials. Is this what you're suggesting me to do? (XDA is now allowing me to write outside links. But here is the title of the tutorial from Asus Zentalk)
"[Experience Sharing] How to Relock Bootloader on ZenFone 2(ZE551ML ONLY)"
I have made a backup before I intalled the Lineage OS custom Rom. Can I use that instead of downloading new files, because the internet here is really bad. My problem is how I am going to install it. I tried restoring it but I keep on coming back to the TWRP.
Edit: I am now downloading the stock boot.img and recovery.img. I will be flashing them with ADB the ADB tool. Is this what you want to tell me? Then I will reboot in stock recovery, select factory reset and sideload firmware. I honestly don't get the "sideload firmware" part but can I use the one that I have backed up? How?
lemuelermita said:
Thank you for your response, Sir. I really appreciate it. Where do I get the stock bootloader and recovery, and how do I flash them? On the alternative method, do you mean I should install the stock rom? I'm sorry. I'm really not good at this; I'm just good at following tutorials. Is this what you're suggesting me to do? (XDA is now allowing me to write outside links. But here is the title of the tutorial from Asus Zentalk)
"[Experience Sharing] How to Relock Bootloader on ZenFone 2(ZE551ML ONLY)"
I have made a backup before I intalled the Lineage OS custom Rom. Can I use that instead of downloading new files, because the internet here is really bad. My problem is how I am going to install it. I tried restoring it but I keep on coming back to the TWRP.
Edit: I am now downloading the stock boot.img and recovery.img. I will be flashing them with ADB the ADB tool. Is this what you want to tell me? Then I will reboot in stock recovery, select factory reset and sideload firmware. I honestly don't get the "sideload firmware" part but can I use the one that I have backed up? How?
Click to expand...
Click to collapse
the backup you made you can flash only via twrp. if you have backup simply install it in twrp. but if still bootloops then you have to download firmware either from asus website or raw firmware from any other source. first try to flash backup in twrp. if you are unable to get into system them report back here. i will send you link to download raw firmware and instructions how to flash
sukhwant717 said:
the backup you made you can flash only via twrp. if you have backup simply install it in twrp. but if still bootloops then you have to download firmware either from asus website or raw firmware from any other source. first try to flash backup in twrp. if you are unable to get into system them report back here. i will send you link to download raw firmware and instructions how to flash
Click to expand...
Click to collapse
I tried to flash the backup but still no luck. Yes, please. Thank you very much!
I'm currently downloading the "CleanSTOCK-MM.223-v3.8[STABLE][Z00A]-6 May". I hope this will fix the problem. Do you think this will work 100%? I am afraid that it will boot again to TWRP after installing another rom. Which do you think is more efficient, installing a new rom or installing raw firmware?
lemuelermita said:
I tried to flash the backup but still no luck. Yes, please. Thank you very much!
I'm currently downloading the "CleanSTOCK-MM.223-v3.8[STABLE][Z00A]-6 May". I hope this will fix the problem. Do you think this will work 100%? I am afraid that it will boot again to TWRP after installing another rom. Which do you think is more efficient, installing a new rom or installing raw firmware?
Click to expand...
Click to collapse
raw is definitely best option. are you able to mount data and cache partition in TWRP
sukhwant717 said:
raw is definitely best option. are you able to mount data and cache partition in TWRP
Click to expand...
Click to collapse
I haven't tried that yet. How do I do that? Can you send me the links and instructions needed?
sukhwant717 said:
raw is definitely best option. are you able to mount data and cache partition in TWRP
Click to expand...
Click to collapse
Defensively smartest guy about phones in the world!!! ahaha <3
lemuelermita said:
I haven't tried that yet. How do I do that? Can you send me the links and instructions needed?
Click to expand...
Click to collapse
go to the following guide. see the section flash firmware without AFT and follow the instructions. keep in mind run each and every command even if any of them fails.
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
sukhwant717 said:
go to the following guide. see the section flash firmware without AFT and follow the instructions. keep in mind run each and every command even if any of them fails.
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
Thank you very much, Sir! I will give you an update soon.
lemuelermita said:
Thank you very much, Sir! I will give you an update soon.
Click to expand...
Click to collapse
Followed the instructions on the link but my phone boots up on a blinking screen with an android saying "Error". The command prompt failed at steps 4,5, and 11.
C:\Users\Lemuel\Documents\RESTOCK>fastboot devices
F5AZFG14A156 fastboot
C:\Users\Lemuel\Documents\RESTOCK>fastboot oem erase_osip_header
...
OKAY [ 0.217s]
finished. total time: 0.219s
C:\Users\Lemuel\Documents\RESTOCK>fastboot oem start_partitioning
...
(bootloader) Start partitioning
OKAY [ 0.228s]
finished. total time: 0.231s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash /tmp/partition.tbl partition.tbl
target reported max download size of 536870912 bytes
sending '/tmp/partition.tbl' (2 KB)...
OKAY [ 0.194s]
writing '/tmp/partition.tbl'...
FAILED (remote: not allowed to flash this partition)
finished. total time: 0.384s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash /tmp/partition.tbl partition.tbl
target reported max download size of 536870912 bytes
sending '/tmp/partition.tbl' (2 KB)...
OKAY [ 0.205s]
writing '/tmp/partition.tbl'...
FAILED (remote: not allowed to flash this partition)
finished. total time: 0.394s
C:\Users\Lemuel\Documents\RESTOCK>fastboot oem partition /tmp/partition.tbl
...
FAILED (remote: unknown OEM command)
finished. total time: 0.127s
C:\Users\Lemuel\Documents\RESTOCK>fastboot erase system
******** Did you mean to fastboot format this ext4 partition?
erasing 'system'...
OKAY [ 0.560s]
finished. total time: 0.561s
C:\Users\Lemuel\Documents\RESTOCK>fastboot erase cache
******** Did you mean to fastboot format this ext4 partition?
erasing 'cache'...
OKAY [ 0.232s]
finished. total time: 0.234s
C:\Users\Lemuel\Documents\RESTOCK>fastboot erase data
******** Did you mean to fastboot format this ext4 partition?
erasing 'data'...
OKAY [ 1.447s]
finished. total time: 1.448s
C:\Users\Lemuel\Documents\RESTOCK>fastboot erase APD
******** Did you mean to fastboot format this ext4 partition?
erasing 'APD'...
OKAY [ 0.290s]
finished. total time: 0.294s
C:\Users\Lemuel\Documents\RESTOCK>fastboot erase ADF
******** Did you mean to fastboot format this ext4 partition?
erasing 'ADF'...
OKAY [ 0.232s]
finished. total time: 0.234s
C:\Users\Lemuel\Documents\RESTOCK>fastboot oem wipe splashscreen
...
FAILED (remote: unknown OEM command)
finished. total time: 0.127s
C:\Users\Lemuel\Documents\RESTOCK>fastboot oem stop_partitioning
...
(bootloader) Stop partitioning
OKAY [ 0.210s]
finished. total time: 0.212s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash splashscreen splash_sign.bin
target reported max download size of 536870912 bytes
sending 'splashscreen' (270 KB)...
OKAY [ 0.192s]
writing 'splashscreen'...
OKAY [ 0.236s]
finished. total time: 0.431s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash token MFG_BOM_Full.bin
target reported max download size of 536870912 bytes
sending 'token' (3 KB)...
OKAY [ 0.194s]
writing 'token'...
OKAY [ 0.370s]
finished. total time: 0.566s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash ifwi ifwi-prod.bin
target reported max download size of 536870912 bytes
sending 'ifwi' (4096 KB)...
OKAY [ 0.294s]
writing 'ifwi'...
OKAY [ 1.027s]
finished. total time: 1.326s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash boot boot_sign.bin
target reported max download size of 536870912 bytes
sending 'boot' (11870 KB)...
OKAY [ 0.531s]
writing 'boot'...
OKAY [ 0.648s]
finished. total time: 1.182s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash recovery recovery_sign.bin
target reported max download size of 536870912 bytes
sending 'recovery' (11882 KB)...
OKAY [ 0.520s]
writing 'recovery'...
OKAY [ 0.636s]
finished. total time: 1.163s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash fastboot droidboot_sign.bin
target reported max download size of 536870912 bytes
sending 'fastboot' (14824 KB)...
OKAY [ 0.558s]
writing 'fastboot'...
OKAY [ 0.739s]
finished. total time: 1.302s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash APD APD.img
target reported max download size of 536870912 bytes
erasing 'APD'...
OKAY [ 0.204s]
sending 'APD' (183963 KB)...
OKAY [ 4.927s]
writing 'APD'...
OKAY [ 0.912s]
finished. total time: 6.049s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash system system.img
target reported max download size of 536870912 bytes
erasing 'system'...
OKAY [ 0.233s]
sending sparse 'system' 1/5 (518551 KB)...
OKAY [ 27.274s]
writing 'system' 1/5...
OKAY [ 5.563s]
sending sparse 'system' 2/5 (523662 KB)...
OKAY [ 22.886s]
writing 'system' 2/5...
OKAY [ 6.964s]
sending sparse 'system' 3/5 (520607 KB)...
OKAY [ 24.630s]
writing 'system' 3/5...
OKAY [ 8.077s]
sending sparse 'system' 4/5 (500735 KB)...
OKAY [ 23.704s]
writing 'system' 4/5...
OKAY [ 7.983s]
sending sparse 'system' 5/5 (188368 KB)...
OKAY [ 8.849s]
writing 'system' 5/5...
OKAY [ 1.187s]
finished. total time: 137.827s
C:\Users\Lemuel\Documents\RESTOCK>
C:\Users\Lemuel\Documents\RESTOCK>
C:\Users\Lemuel\Documents\RESTOCK>fastboot reboot
rebooting...
finished. total time: 0.126s
lemuelermita said:
Thank you very much, Sir! I will give you an update soon.
Click to expand...
Click to collapse
The command prompt failed at steps 4,5, and 11. It only boots in a blinking screen with an android saying, "Error". Tried it again for the second time but still boots in same screen. I tried to manually boot up the phone without the commands and worked. Thank you very much!
lemuelermita said:
The command prompt failed at steps 4,5, and 11. It only boots in a blinking screen with an android saying, "Error". Tried it again for the second time but still boots in same screen. I tried to manually boot up the phone without the commands and worked. Thank you very much!
Click to expand...
Click to collapse
hmm good to know device working again. strongly recommend you to perform a factory reset even device working perfectly.
Hi, Yeah I tried to flash the unlock image,
fastboot -i 0x2b4c flash unlock unlock_bootloader.img
target reported max download size of 1610612736 bytes
sending 'unlock' (0 KB)...
OKAY [ 0.031s]
writing 'unlock'...
FAILED (remote: unlock failed)
finished. total time: 0.053s
Now I am in latest version Nougat
I fixed it ....
Solution ..just try one more time get new unlock_bootloader.IMG then flash it ...Enjoy
viknesh war said:
Hi, Yeah I tried to flash the unlock image,
fastboot -i 0x2b4c flash unlock unlock_bootloader.img
target reported max download size of 1610612736 bytes
sending 'unlock' (0 KB)...
OKAY [ 0.031s]
writing 'unlock'...
FAILED (remote: unlock failed)
finished. total time: 0.053s
Now I am in latest version Nougat
Click to expand...
Click to collapse
Yup i was also facing the same problem a new bootloader image will fix it just request for a new bootloader image from zuk.
viknesh war said:
I fixed it ....
Solution ..just try one more time get new unlock_bootloader.IMG then flash it ...Enjoy
Click to expand...
Click to collapse
Thanks a lot bro.. I downloaded a new unlock_bootloader. Img file, and it worked just fine.
Actually I entered wrong serial number in zuk website while downloading the img file maybe because of that it didn't work at first
case : i wanna tryin to install twrp,
log :
PS C:\adb> fastboot flash recovery twrp.img
target reported max download size of 805306368 bytes
sending 'recovery' (39920 KB)...
OKAY [ 1.269s]
writing 'recovery'...
OKAY [ 0.285s]
finished. total time: 1.558s
but after tryin to reboot, it always looping to fastboot, any solution?
device : redmi 7 4/64
Hi hanselfermin,
Did you eventually find a way to boot into TWRP ?
Are there roms to flash with fastboot ? Since I can't boot to recovery (local on my pc or on the phone).
robuser007 said:
Are there roms to flash with fastboot ? Since I can't boot to recovery (local on my pc or on the phone).
Click to expand...
Click to collapse
TrebleGSI - Browse /LiR/2022.03.25 at SourceForge.net
sourceforge.net
How do I flash this? I only find an img file
which one do I need?
How do I flash this? I only find an img file
which one do I need?
kirichen said:
TrebleGSI - Browse /LiR/2022.03.25 at SourceForge.net
sourceforge.net
Click to expand...
Click to collapse
robuser007 said:
which one do I need?
Click to expand...
Click to collapse
Install TrebleInfo.apk from google play and run, give me the screenshot
kirichen said:
Install TrebleInfo.apk from google play and run, give me the screenshot
Click to expand...
Click to collapse
<ARCH>_xyZ
<ARCH> can be arm, a64(arm32_binder64) or arm64
x can be a or b
y can be v, o, g or f
Z can be N, S or Z
b = a/b
a = a-only
g = gapps
o = gapps-go
v = vanilla (no built-in gapps)
f = floss (free & open source apps instead of gapps)
N = no phh-superuser and su (no root)
S = integrated with su, sometimes with phh-superuser
Z = extended dynamic root, su plus phh-superuser (you can enable/disable root without rebooting)
-vndklite, -lite = Android 11 builds for VNDK Lite vendors (view via Treble Info app)
that is, for example, "arm64_avN" is ARM64 A-only vanilla (without gapps) and without root
robuser007 said:
How do I flash this?
Click to expand...
Click to collapse
unzip systemA11.img
install fastboot for your platform
SDK Platform Tools release notes | Android Studio | Android Developers
Android SDK Platform-Tools is a component for the Android SDK.
developer.android.com
kirichen said:
unzip systemA11.img
install fastboot for your platform
SDK Platform Tools release notes | Android Studio | Android Developers
Android SDK Platform-Tools is a component for the Android SDK.
developer.android.com
Click to expand...
Click to collapse
Install Android 11 GSI for App Testing | Android Developers
In this codelab, you will install Android 11 Generic System Image (GSI) to Android 9 (Pie) devices. After that, you can develop and validate your application with the new OS!
developer.android.com
robuser007 said:
How do I flash this?
Click to expand...
Click to collapse
In general, 3 things are needed to use Android GSI:
a device is fully Treble compliant (Treble support is mandatory for devices launched with Android 9 or later).
the device's bootloader could be unlocked.
the tools and procedures to update OS for the device.
robuser007 said:
Oneplus Nord
Click to expand...
Click to collapse
old phone!!! not this one
kirichen said:
In general, 3 things are needed to use Android GSI:
a device is fully Treble compliant (Treble support is mandatory for devices launched with Android 9 or later).
the device's bootloader could be unlocked.
the tools and procedures to update OS for the device.
adb devices
adb reboot bootloader
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase system
fastboot flash system systemA11.img
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
Thanks, I'll try, can't boot to the system and booting to a recovery is crashing my phone (f.e
fastboot boot twrpname.img). I guess it's a hardbrick.
I get an error trying this command:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot --disable-verity --disable-verification flash vbmeta D:\P2a42_S244_170725_ROW_fastboot\P2a42_S244_170725_ROW_fastboot\SW\vbmeta.img
fastboot: unknown option -- disable-verity
https://sourceforge.net/projects/treblerom/files/LiR/2022.03.25/lir-v316-220325-arm64-bvZ.img.xz is ok to use?
It's my old backup phone that once crashed, not for the Nord I have.
robuser007 said:
How do I flash this? I only find an img file
which one do I need?
Click to expand...
Click to collapse
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase system
fastboot flash system systemA11.img
fastboot -w
fastboot reboot
robuser007 said:
is ok to use?
Click to expand...
Click to collapse
it depends on screenshot of TrebleInfo.apk
robuser007 said:
my old backup phone that once crashed
Click to expand...
Click to collapse
what is the name of your phone? Have you backup? Can you give me the link to google disk with back up?
robuser007 said:
fastboot: unknown option -- disable-verity
Click to expand...
Click to collapse
fastboot --version
fastboot version 33.0.2-8557947 ?????
Did you unlock your bootloader?
fastboot getvar unlocked
(true OR false) (yes OR no) ?????
kirichen said:
fastboot --version
fastboot version 33.0.2-8557947 ?????
Did you unlock your bootloader?
https://www.getdroidtips.com/unlock-bootloader-mediatek-device/
fastboot getvar unlocked
(true OR false) (yes OR no) ?????
Click to expand...
Click to collapse
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar unlocked
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
unlocked: unlocked
finished. total time: 0.025s
It's a Lenovo p2 (Eu version). I don't have any backup anymore since I couldn,'t boot into recovery.
robuser007 said:
It's a Lenovo p2 (Eu version
Click to expand...
Click to collapse
forget about all we talk before....It was for Android 9 and higher A10, A11/ Your firmware is Android 6 or 7
Яндекс
Найдётся всё
disk.yandex.ru
I don't know what was your official firmware , here is the instruction to flash your phone
--------------------------------------------
Instruction to flash a firmware via fastboot
For unlocked devices!
Applies to firmware 6/62;7/232;7/233;7/244;7/251
1. Download the firmware, unpack it on a PC.
2. Install all drivers for ADB/FASTBOOT operation.
3. Download and unpack the attached archive- Attached file RESTORE_UNLOCK_DEVICES.zip ( 613.53 KB )
4. Move the files from the RESTORE_UNLOCK_DEVICES folder to the SW folder with the firmware files. In firmware 251, move the files to the Images folder.
5. Reboot the phone into FASTBOOT mode (disconnect the phone from the PC, turn off the phone, hold the power and volume down at the same time) and connect the phone to the PC.
6. Run the shortcut - START in the firmware folder.bat
Wait for the firmware installation to finish. The phone will reboot into the system .
7. After switching on, apply the regional code by dialing ###682 in the dialer#
Addition:
If there is a need to flash the phone without losing user data, then in the START file.bat you need to delete the line - fastboot flash userdata userdata.img
To do this, right-click on the file and open it using any text editor on a PC. Then save it.
robuser007 said:
since I couldn,'t boot into recovery.
Click to expand...
Click to collapse
May be simple
fastboot -w
help you? erase all your data( wipe, format) and you can boot into system.
Lenovo Vibe P2 - Получение ROOT прав
Получение ROOT прав на Lenovo Vibe P2 - Android 6.0 Установка TWRP и получение ROOT возможно только после разблокировки загрузчика! ...
lenovo--forums-ru.translate.goog
kirichen said:
May be simple
fastboot -w
help you? erase all your data( wipe, format) and you can boot into system.
Lenovo Vibe P2 - Получение ROOT прав
Получение ROOT прав на Lenovo Vibe P2 - Android 6.0 Установка TWRP и получение ROOT возможно только после разблокировки загрузчика! ...
lenovo--forums-ru.translate.goog
Click to expand...
Click to collapse
Tried, but didn't help
fastboot boot d:\recovery_kuntao.img f.e. crashes my fastboot and doesn't boot to recovery.
kirichen said:
forget about all we talk before....It was for Android 9 and higher A10, A11/ Your firmware is Android 6 or 7
Яндекс
Найдётся всё
disk.yandex.ru
I don't know what was your official firmware , here is the instruction to flash your phone
--------------------------------------------
Instruction to flash a firmware via fastboot
For unlocked devices!
Applies to firmware 6/62;7/232;7/233;7/244;7/251
1. Download the firmware, unpack it on a PC.
2. Install all drivers for ADB/FASTBOOT operation.
3. Download and unpack the attached archive- Attached file RESTORE_UNLOCK_DEVICES.zip ( 613.53 KB )
4. Move the files from the RESTORE_UNLOCK_DEVICES folder to the SW folder with the firmware files. In firmware 251, move the files to the Images folder.
5. Reboot the phone into FASTBOOT mode (disconnect the phone from the PC, turn off the phone, hold the power and volume down at the same time) and connect the phone to the PC.
6. Run the shortcut - START in the firmware folder.bat
Wait for the firmware installation to finish. The phone will reboot into the system .
7. After switching on, apply the regional code by dialing ###682 in the dialer#
Addition:
If there is a need to flash the phone without losing user data, then in the START file.bat you need to delete the line - fastboot flash userdata userdata.img
To do this, right-click on the file and open it using any text editor on a PC. Then save it.
Click to expand...
Click to collapse
Spoiler
PS D:\P2a42_S244_170725_ROW_fastboot\P2a42_S244_170725_ROW_fastboot\SW> .\start.bat
Active code page: 1251
ECHO is off.
...
OKAY [ -0.000s]
finished. total time: 0.016s
target reported max download size of 536870912 bytes
sending 'partition' (33 KB)...
OKAY [ 0.047s]
writing 'partition'...
OKAY [ 0.031s]
finished. total time: 0.079s
target reported max download size of 536870912 bytes
sending 'boot' (23381 KB)...
OKAY [ 0.655s]
writing 'boot'...
OKAY [ 0.186s]
finished. total time: 0.852s
target reported max download size of 536870912 bytes
sending 'recovery' (27119 KB)...
OKAY [ 0.736s]
writing 'recovery'...
OKAY [ 0.248s]
finished. total time: 1.000s
target reported max download size of 536870912 bytes
sending 'dsp' (16384 KB)...
OKAY [ 0.459s]
writing 'dsp'...
OKAY [ 0.129s]
finished. total time: 0.607s
target reported max download size of 536870912 bytes
sending 'system' (257817 KB)...
OKAY [ 6.948s]
writing 'system'...
OKAY [ 2.095s]
finished. total time: 9.073s
target reported max download size of 536870912 bytes
sending 'system' (257941 KB)...
OKAY [ 7.120s]
writing 'system'...
OKAY [ 1.784s]
finished. total time: 8.904s
target reported max download size of 536870912 bytes
sending 'system' (257344 KB)...
OKAY [ 7.215s]
writing 'system'...
OKAY [ 1.846s]
finished. total time: 9.061s
target reported max download size of 536870912 bytes
sending 'system' (257491 KB)...
OKAY [ 7.029s]
writing 'system'...
OKAY [ 1.832s]
finished. total time: 8.887s
target reported max download size of 536870912 bytes
sending 'system' (260519 KB)...
OKAY [ 7.220s]
writing 'system'...
OKAY [ 1.953s]
finished. total time: 9.185s
target reported max download size of 536870912 bytes
sending 'system' (257935 KB)...
OKAY [ 7.024s]
writing 'system'...
OKAY [ 1.890s]
finished. total time: 8.914s
target reported max download size of 536870912 bytes
sending 'system' (254719 KB)...
OKAY [ 7.045s]
writing 'system'...
OKAY [ 2.001s]
finished. total time: 9.047s
target reported max download size of 536870912 bytes
sending 'system' (261754 KB)...
OKAY [ 7.188s]
writing 'system'...
OKAY [ 2.119s]
finished. total time: 9.322s
target reported max download size of 536870912 bytes
sending 'system' (262142 KB)...
OKAY [ 7.140s]
writing 'system'...
OKAY [ 1.936s]
finished. total time: 9.077s
target reported max download size of 536870912 bytes
sending 'system' (261321 KB)...
OKAY [ 7.251s]
writing 'system'...
OKAY [ 1.841s]
finished. total time: 9.092s
target reported max download size of 536870912 bytes
sending 'system' (254468 KB)...
OKAY [ 7.046s]
writing 'system'...
OKAY [ 1.812s]
finished. total time: 8.873s
target reported max download size of 536870912 bytes
sending 'system' (262142 KB)...
OKAY [ 7.205s]
writing 'system'...
OKAY [ 1.841s]
finished. total time: 9.061s
target reported max download size of 536870912 bytes
sending 'system' (262140 KB)...
OKAY [ 7.234s]
writing 'system'...
OKAY [ 1.890s]
finished. total time: 9.139s
target reported max download size of 536870912 bytes
sending 'system' (260859 KB)...
OKAY [ 7.218s]
writing 'system'...
OKAY [ 1.927s]
finished. total time: 9.145s
target reported max download size of 536870912 bytes
sending 'system' (69256 KB)...
OKAY [ 1.910s]
writing 'system'...
OKAY [ 0.475s]
finished. total time: 2.394s
target reported max download size of 536870912 bytes
sending 'userdata' (297806 KB)...
OKAY [ 8.046s]
writing 'userdata'...
OKAY [ 2.155s]
finished. total time: 10.216s
target reported max download size of 536870912 bytes
sending 'fsg' (304 KB)...
OKAY [ 0.031s]
writing 'fsg'...
OKAY [ 0.016s]
finished. total time: 0.077s
erasing 'cache'...
OKAY [ 0.032s]
finished. total time: 0.032s
...
OKAY [ -0.000s]
finished. total time: 0.016s
Press any key to continue . . .
rebooting...
finished. total time: 0.016s
PS D:\P2a42_S244_170725_ROW_fastboot\P2a42_S244_170725_ROW_fastboot\SW>
Done, boot stays on Lenovo boot logo, I guess it's really hard bricked (something must be broken). Thanks for your help!